Add G38.4 and G38.5 (#13348)
This commit is contained in:
parent
e4d080e63c
commit
b824a517aa
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -114,8 +114,8 @@
|
||||
#endif
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
bool G38_move = false,
|
||||
G38_endstop_hit = false;
|
||||
uint8_t G38_move; // = 0
|
||||
bool G38_did_trigger; // = false
|
||||
#endif
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
|
@ -309,8 +309,8 @@ void manage_inactivity(const bool ignore_stepper_queue=false);
|
||||
#endif
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run
|
||||
G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
|
||||
extern uint8_t G38_move; // Flag to tell the ISR that G38 is in progress, and the type
|
||||
extern bool G38_did_trigger; // Flag from the ISR to indicate the endstop changed
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
@ -258,9 +258,14 @@ void GcodeSuite::process_parsed_command(
|
||||
#endif
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
case 38: // G38.2 & G38.3: Probe towards target
|
||||
if (parser.subcode == 2 || parser.subcode == 3)
|
||||
G38(parser.subcode == 2);
|
||||
case 38: // G38.2, G38.3: Probe towards target
|
||||
if (WITHIN(parser.subcode, 2,
|
||||
#if ENABLED(G38_PROBE_AWAY)
|
||||
5
|
||||
#else
|
||||
3
|
||||
#endif
|
||||
)) G38(parser.subcode); // G38.4, G38.5: Probe away from target
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
@ -415,7 +415,7 @@ private:
|
||||
#endif
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
static void G38(const bool is_38_2);
|
||||
static void G38(const int8_t subcode);
|
||||
#endif
|
||||
|
||||
#if HAS_MESH
|
||||
|
@ -31,7 +31,18 @@
|
||||
#include "../../module/stepper.h"
|
||||
#include "../../module/probe.h"
|
||||
|
||||
static bool G38_run_probe() {
|
||||
inline void G38_single_probe(const uint8_t move_value) {
|
||||
endstops.enable(true);
|
||||
G38_move = move_value;
|
||||
prepare_move_to_destination();
|
||||
planner.synchronize();
|
||||
G38_move = 0;
|
||||
endstops.hit_on_purpose();
|
||||
set_current_from_steppers_for_axis(ALL_AXES);
|
||||
sync_plan_position();
|
||||
}
|
||||
|
||||
inline bool G38_run_probe() {
|
||||
|
||||
bool G38_pass_fail = false;
|
||||
|
||||
@ -46,19 +57,19 @@ static bool G38_run_probe() {
|
||||
|
||||
planner.synchronize(); // wait until the machine is idle
|
||||
|
||||
// Move flag value
|
||||
#if ENABLED(G38_PROBE_AWAY)
|
||||
const uint8_t move_value = parser.subcode;
|
||||
#else
|
||||
constexpr uint8_t move_value = 1;
|
||||
#endif
|
||||
|
||||
G38_did_trigger = false;
|
||||
|
||||
// Move until destination reached or target hit
|
||||
endstops.enable(true);
|
||||
G38_move = true;
|
||||
G38_endstop_hit = false;
|
||||
prepare_move_to_destination();
|
||||
planner.synchronize();
|
||||
G38_move = false;
|
||||
G38_single_probe(move_value);
|
||||
|
||||
endstops.hit_on_purpose();
|
||||
set_current_from_steppers_for_axis(ALL_AXES);
|
||||
sync_plan_position();
|
||||
|
||||
if (G38_endstop_hit) {
|
||||
if (G38_did_trigger) {
|
||||
|
||||
G38_pass_fail = true;
|
||||
|
||||
@ -70,45 +81,50 @@ static bool G38_run_probe() {
|
||||
prepare_move_to_destination();
|
||||
planner.synchronize();
|
||||
|
||||
feedrate_mm_s /= 4;
|
||||
REMEMBER(fr, feedrate_mm_s, feedrate_mm_s * 0.25);
|
||||
|
||||
// Bump the target more slowly
|
||||
LOOP_XYZ(i) destination[i] -= retract_mm[i] * 2;
|
||||
|
||||
endstops.enable(true);
|
||||
G38_move = true;
|
||||
prepare_move_to_destination();
|
||||
planner.synchronize();
|
||||
G38_move = false;
|
||||
|
||||
set_current_from_steppers_for_axis(ALL_AXES);
|
||||
sync_plan_position();
|
||||
G38_single_probe(move_value);
|
||||
#endif
|
||||
}
|
||||
|
||||
endstops.hit_on_purpose();
|
||||
endstops.not_homing();
|
||||
return G38_pass_fail;
|
||||
}
|
||||
|
||||
/**
|
||||
* G38.2 - probe toward workpiece, stop on contact, signal error if failure
|
||||
* G38.3 - probe toward workpiece, stop on contact
|
||||
* G38 Probe Target
|
||||
*
|
||||
* Like G28 except uses Z min probe for all axes
|
||||
* G38.2 - Probe toward workpiece, stop on contact, signal error if failure
|
||||
* G38.3 - Probe toward workpiece, stop on contact
|
||||
*
|
||||
* With G38_PROBE_AWAY:
|
||||
*
|
||||
* G38.4 - Probe away from workpiece, stop on contact break, signal error if failure
|
||||
* G38.5 - Probe away from workpiece, stop on contact break
|
||||
*/
|
||||
void GcodeSuite::G38(const bool is_38_2) {
|
||||
void GcodeSuite::G38(const int8_t subcode) {
|
||||
// Get X Y Z E F
|
||||
get_destination_from_command();
|
||||
|
||||
setup_for_endstop_or_probe_move();
|
||||
|
||||
const bool error_on_fail =
|
||||
#if ENABLED(G38_PROBE_AWAY)
|
||||
!TEST(subcode, 0)
|
||||
#else
|
||||
(subcode == 2)
|
||||
#endif
|
||||
;
|
||||
|
||||
// If any axis has enough movement, do the move
|
||||
LOOP_XYZ(i)
|
||||
if (ABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
|
||||
if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate((AxisEnum)i);
|
||||
// If G38.2 fails throw an error
|
||||
if (!G38_run_probe() && is_38_2) SERIAL_ERROR_MSG("Failed to reach target");
|
||||
if (!G38_run_probe() && error_on_fail) SERIAL_ERROR_MSG("Failed to reach target");
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -672,14 +672,17 @@ void Endstops::update() {
|
||||
}while(0)
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
|
||||
#if ENABLED(G38_PROBE_AWAY)
|
||||
#define _G38_OPEN_STATE (G38_move >= 4)
|
||||
#else
|
||||
#define _G38_OPEN_STATE LOW
|
||||
#endif
|
||||
// If G38 command is active check Z_MIN_PROBE for ALL movement
|
||||
if (G38_move) {
|
||||
if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
|
||||
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); }
|
||||
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); }
|
||||
else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); }
|
||||
G38_endstop_hit = true;
|
||||
}
|
||||
if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE)) != _G38_OPEN_STATE) {
|
||||
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); }
|
||||
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); }
|
||||
else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); }
|
||||
G38_did_trigger = true;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1067,11 +1067,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1072,11 +1072,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1076,11 +1076,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1067,11 +1067,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1072,11 +1072,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1073,11 +1073,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1076,11 +1076,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1081,11 +1081,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1069,11 +1069,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1070,11 +1070,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1068,11 +1068,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
@ -1069,11 +1069,17 @@
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
/**
|
||||
* G38 Probe Target
|
||||
*
|
||||
* This option adds G38.2 and G38.3 (probe towards target)
|
||||
* and optionally G38.4 and G38.5 (probe away from target).
|
||||
* Set MULTIPLE_PROBING for G38 to probe more than once.
|
||||
*/
|
||||
//#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
|
||||
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
|
Loading…
Reference in New Issue
Block a user