From ba31d39f6df480c390aa188024bca447eab1527f Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue, 9 Apr 2019 00:10:45 -0400 Subject: [PATCH] Azteeg X5 Mini support (#13425) --- Marlin/Configuration_adv.h | 1 + Marlin/src/core/boards.h | 3 +- .../src/feature/digipot/digipot_mcp4451.cpp | 3 + Marlin/src/pins/pins.h | 36 +-- Marlin/src/pins/pins_5DPRINT.h | 4 +- Marlin/src/pins/pins_AZTEEG_X3_PRO.h | 8 +- Marlin/src/pins/pins_AZTEEG_X5_MINI.h | 218 ++++++++++++++++++ Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h | 180 +-------------- Marlin/src/pins/pins_MIGHTYBOARD_REVE.h | 4 +- 9 files changed, 261 insertions(+), 196 deletions(-) create mode 100644 Marlin/src/pins/pins_AZTEEG_X5_MINI.h diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 806550b4e..0d675e2e0 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -679,6 +679,7 @@ * A (A shifted) B (B shifted) IC * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index cfebabe1b..ee9da1fd1 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -189,10 +189,11 @@ #define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix #define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini #define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard -#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) +#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan) #define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed) #define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver) #define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed) +#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) // // SAM3X8E ARM Cortex M3 diff --git a/Marlin/src/feature/digipot/digipot_mcp4451.cpp b/Marlin/src/feature/digipot/digipot_mcp4451.cpp index 6e02a1607..bc4330405 100644 --- a/Marlin/src/feature/digipot/digipot_mcp4451.cpp +++ b/Marlin/src/feature/digipot/digipot_mcp4451.cpp @@ -35,6 +35,9 @@ #if MB(5DPRINT) #define DIGIPOT_I2C_FACTOR 117.96 #define DIGIPOT_I2C_MAX_CURRENT 1.736 +#elif MB(AZTEEG_X5_MINI) || MB(AZTEEG_X5_MINI_WIFI) + #define DIGIPOT_I2C_FACTOR 113.5 + #define DIGIPOT_I2C_MAX_CURRENT 2.0 #else #define DIGIPOT_I2C_FACTOR 106.7 #define DIGIPOT_I2C_MAX_CURRENT 2.5 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index c3ece1346..68de292c0 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -305,39 +305,41 @@ // #elif MB(RAMPS_14_RE_ARM_EFB) - #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 + #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #elif MB(RAMPS_14_RE_ARM_EEB) - #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 + #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #elif MB(RAMPS_14_RE_ARM_EFF) - #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 + #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #elif MB(RAMPS_14_RE_ARM_EEF) - #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 + #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #elif MB(RAMPS_14_RE_ARM_SF) - #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 + #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768 #elif MB(MKS_SBASE) - #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768 + #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768 #elif MB(AZSMZ_MINI) - #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768 + #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768 #elif MB(AZTEEG_X5_GT) - #include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769 + #include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769 +#elif MB(AZTEEG_X5_MINI) + #include "pins_AZTEEG_X5_MINI.h" // LPC1769 env:LPC1769 #elif MB(AZTEEG_X5_MINI_WIFI) - #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769 + #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769 #elif MB(BIQU_BQ111_A4) - #include "pins_BIQU_BQ111_A4.h" // LPC1768 env:LPC1768 + #include "pins_BIQU_BQ111_A4.h" // LPC1768 env:LPC1768 #elif MB(SELENA_COMPACT) - #include "pins_SELENA_COMPACT.h" // LPC1768 env:LPC1768 + #include "pins_SELENA_COMPACT.h" // LPC1768 env:LPC1768 #elif MB(COHESION3D_REMIX) - #include "pins_COHESION3D_REMIX.h" // LPC1769 env:LPC1769 + #include "pins_COHESION3D_REMIX.h" // LPC1769 env:LPC1769 #elif MB(COHESION3D_MINI) - #include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769 + #include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769 #elif MB(SMOOTHIEBOARD) - #include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769 + #include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769 #elif MB(BIQU_SKR_V1_1) - #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768 + #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768 #elif MB(BIQU_B300_V1_0) - #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768 + #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768 #elif MB(BIGTREE_SKR_V1_3) - #include "pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768 + #include "pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768 // // Other 32-bit Boards diff --git a/Marlin/src/pins/pins_5DPRINT.h b/Marlin/src/pins/pins_5DPRINT.h index f8184f567..9eb36ba62 100755 --- a/Marlin/src/pins/pins_5DPRINT.h +++ b/Marlin/src/pins/pins_5DPRINT.h @@ -142,4 +142,6 @@ #define SDSS 20 // B0 //DIGIPOTS slave addresses -#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#endif diff --git a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h index 6f6074086..55ee39f84 100644 --- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h @@ -48,8 +48,12 @@ #include "pins_RAMPS.h" // DIGIPOT slave addresses -#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) -#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#endif +#ifndef DIGIPOT_I2C_ADDRESS_B + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) +#endif // // Servos diff --git a/Marlin/src/pins/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h new file mode 100644 index 000000000..c73f62fa9 --- /dev/null +++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h @@ -0,0 +1,218 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Azteeg X5 MINI pin assignments + */ + +#ifndef LPC1769 + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Azteeg X5 MINI WIFI" +#endif +#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm" + +// +// LED +// +#define LED_PIN P1_18 + +// +// Servos +// +#define SERVO0_PIN P1_29 + +// +// Limit Switches +// +#define X_STOP_PIN P1_24 +#define Y_STOP_PIN P1_26 +#define Z_STOP_PIN P1_28 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN P2_04 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_01 +#define X_DIR_PIN P0_11 +#define X_ENABLE_PIN P0_10 + +#define Y_STEP_PIN P2_02 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P0_19 + +#define Z_STEP_PIN P2_03 +#define Z_DIR_PIN P0_22 +#define Z_ENABLE_PIN P0_21 + +#define E0_STEP_PIN P2_00 +#define E0_DIR_PIN P0_05 +#define E0_ENABLE_PIN P0_04 + +// +// DIGIPOT slave addresses +// +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT +#endif + +#ifndef DIGIPOT_I2C_ADDRESS_B + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_BED_PIN 0 // A0 (TH1) +#define TEMP_0_PIN 1 // A1 (TH2) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_07 +#define HEATER_0_PIN P2_05 +#ifndef FAN_PIN + #define FAN_PIN P0_26 +#endif +#define FAN1_PIN P1_25 + +// +// Display +// +#if ENABLED(ULTRA_LCD) + + #if ENABLED(CR10_STOCKDISPLAY) + + // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3. + // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one + // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. + // Requires REVERSE_ENCODER_DIRECTION in Configuration.h + + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 + + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 + + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) + + #else + + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + + #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + + #if ENABLED(REPRAPWORLD_KEYPAD) + #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #elif DISABLED(NEWPANEL) + //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + #endif + + #if ANY(VIKI2, miniVIKI) + //#define LCD_SCREEN_ROT_180 + + #define BEEPER_PIN P1_30 // (37) may change if cable changes + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN + + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #else + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + #endif + #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #define DOGLCD_CS P0_16 // (16) + #endif + + #if ENABLED(MINIPANEL) + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #endif + + #endif + +#endif // ULTRA_LCD + +// +// SD Support +// +//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB +//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB + +//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD +#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin + // for the onboard card. Init card from LCD menu or send M21 whenever printer + // is powered on to enable SD access. + +#if ENABLED(LPC_SD_LCD) + + #define SCK_PIN P0_15 + #define MISO_PIN P0_17 + #define MOSI_PIN P0_18 + #define SS_PIN P1_23 // Chip select for SD card used by Marlin + #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card + +#elif ENABLED(LPC_SD_ONBOARD) + + #if ENABLED(USB_SD_ONBOARD) + // When sharing the SD card with a PC we want the menu options to + // mount/unmount the card and refresh it. So we disable card detect. + #define SHARED_SD_CARD + #undef SD_DETECT_PIN // there is also no detect pin for the onboard card + #endif + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN P0_06 // Chip select for SD card used by Marlin + #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card + +#endif diff --git a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h index b71cf0e53..760e0d76d 100644 --- a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h +++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h @@ -29,183 +29,15 @@ #endif #define BOARD_NAME "Azteeg X5 MINI WIFI" -#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm" - -// -// LED -// -#define LED_PIN P1_18 - -// -// Servos -// -#define SERVO0_PIN P1_29 - -// -// Limit Switches -// -#define X_STOP_PIN P1_24 -#define Y_STOP_PIN P1_26 -#define Z_STOP_PIN P1_28 - -#ifndef FILWIDTH_PIN - #define FILWIDTH_PIN P2_04 -#endif - -// -// Steppers -// -#define X_STEP_PIN P2_01 -#define X_DIR_PIN P0_11 -#define X_ENABLE_PIN P0_10 - -#define Y_STEP_PIN P2_02 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P0_19 - -#define Z_STEP_PIN P2_03 -#define Z_DIR_PIN P0_22 -#define Z_ENABLE_PIN P0_21 - -#define E0_STEP_PIN P2_00 -#define E0_DIR_PIN P0_05 -#define E0_ENABLE_PIN P0_04 // // DIGIPOT slave addresses // -#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1) -#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1) - -// -// Temperature Sensors -// 3.3V max when defined as an analog input -// -#define TEMP_BED_PIN 0 // A0 (TH1) -#define TEMP_0_PIN 1 // A1 (TH2) - -// -// Heaters / Fans -// -#define HEATER_BED_PIN P2_07 -#define HEATER_0_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P0_26 +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1) #endif -#define FAN1_PIN P1_25 - -// -// Display -// -#if ENABLED(ULTRA_LCD) - - #if ENABLED(CR10_STOCKDISPLAY) - - // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3. - // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one - // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. - // Requires REVERSE_ENCODER_DIRECTION in Configuration.h - - #define BEEPER_PIN P2_11 // J3-3 & AUX-4 - - #define BTN_EN1 P0_16 // J3-7 & AUX-4 - #define BTN_EN2 P1_23 // J3-5 & AUX-4 - #define BTN_ENC P3_25 // J3-4 & AUX-4 - - #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) - #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) - #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) - - #else - - #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 - #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 - #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 - - #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 - #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 - #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 - #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers - #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 - - #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 - - #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #elif DISABLED(NEWPANEL) - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 - #endif - - #if ANY(VIKI2, miniVIKI) - //#define LCD_SCREEN_ROT_180 - - #define BEEPER_PIN P1_30 // (37) may change if cable changes - #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 - #define DOGLCD_SCK SCK_PIN - #define DOGLCD_MOSI MOSI_PIN - - #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes - #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes - #else - #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO - #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER - #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 - #endif - #define BEEPER_PIN P1_30 // (37) not 5V tolerant - #define DOGLCD_CS P0_16 // (16) - #endif - - #if ENABLED(MINIPANEL) - // GLCD features - // Uncomment screen orientation - //#define LCD_SCREEN_ROT_90 - //#define LCD_SCREEN_ROT_180 - //#define LCD_SCREEN_ROT_270 - #endif - - #endif - -#endif // ULTRA_LCD - -// -// SD Support -// -//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB -//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB - -//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD -#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin - // for the onboard card. Init card from LCD menu or send M21 whenever printer - // is powered on to enable SD access. - -#if ENABLED(LPC_SD_LCD) - - #define SCK_PIN P0_15 - #define MISO_PIN P0_17 - #define MOSI_PIN P0_18 - #define SS_PIN P1_23 // Chip select for SD card used by Marlin - #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card - -#elif ENABLED(LPC_SD_ONBOARD) - - #if ENABLED(USB_SD_ONBOARD) - // When sharing the SD card with a PC we want the menu options to - // mount/unmount the card and refresh it. So we disable card detect. - #define SHARED_SD_CARD - #undef SD_DETECT_PIN // there is also no detect pin for the onboard card - #endif - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN P0_06 // Chip select for SD card used by Marlin - #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card - +#ifndef DIGIPOT_I2C_ADDRESS_B + #define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1) #endif + +#include "pins_AZTEEG_X5_MINI.h" diff --git a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h index 079aab358..d9def846c 100644 --- a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h @@ -104,7 +104,9 @@ #define DIGIPOTS_I2C_SDA_E0 27 // A5 #define DIGIPOTS_I2C_SDA_E1 77 // J6 -#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) +#endif // // Temperature Sensors