CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added #ifdef BARICUDA around the BariCUDA changes

Browse Source
This commit is contained in:
Erik van der Zalm 2013-05-14 23:56:32 +02:00
parent 37f3199df3
commit bd2cd4903e
6 changed files with 53 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration.h
View File

@ -403,6 +403,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// SF send wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder.
//#define BARICUDA
#include "Configuration_adv.h"
#include "thermistortables.h"

2
Marlin/Marlin.h
View File

@ -186,8 +186,10 @@ extern float add_homeing[3];
extern float min_pos[3];
extern float max_pos[3];
extern int fanSpeed;
#ifdef BARICUDA
extern int ValvePressure;
extern int EtoPPressure;
#endif
#ifdef FWRETRACT
extern bool autoretract_enabled;

6
Marlin/Marlin_main.cpp
View File

@ -172,8 +172,10 @@ float extruder_offset[2][EXTRUDERS] = {
#endif
uint8_t active_extruder = 0;
int fanSpeed=0;
#ifdef BARICUDA
int ValvePressure=0;
int EtoPPressure=0;
#endif
#ifdef FWRETRACT
bool autoretract_enabled=true;
@ -1174,7 +1176,7 @@ void process_commands()
fanSpeed = 0;
break;
#endif //FAN_PIN
#ifdef BARICUDA
// PWM for HEATER_1_PIN
#if HEATER_1_PIN > -1
case 126: //M126 valve open
@ -1204,7 +1206,7 @@ void process_commands()
EtoPPressure = 0;
break;
#endif //HEATER_2_PIN
#endif
#if (PS_ON_PIN > -1)
case 80: // M80 - ATX Power On

4
Marlin/pins.h
View File

@ -1474,7 +1474,11 @@
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#ifdef BARICUDA
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#endif
#define TEMP_2_PIN -1
#define E0_STEP_PIN 34

8
Marlin/planner.cpp
View File

@ -439,18 +439,22 @@ void check_axes_activity()
unsigned char z_active = 0;
unsigned char e_active = 0;
unsigned char tail_fan_speed = fanSpeed;
#ifdef BARICUDA
unsigned char valve_pressure = 0;
unsigned char e_to_p_pressure = 0;
unsigned char tail_valve_pressure = 0;
unsigned char tail_e_to_p_pressure = 0;
#endif
block_t *block;
if(block_buffer_tail != block_buffer_head)
{
uint8_t block_index = block_buffer_tail;
tail_fan_speed = block_buffer[block_index].fan_speed;
#ifdef BARICUDA
tail_valve_pressure = block_buffer[block_index].valve_pressure;
tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure;
#endif
while(block_index != block_buffer_head)
{
block = &block_buffer[block_index];
@ -493,6 +497,7 @@ void check_axes_activity()
getHighESpeed();
#endif
#ifdef BARICUDA
#if HEATER_1_PIN > -1
if (ValvePressure != 0){
analogWrite(HEATER_1_PIN,ValvePressure); // If buffer is empty use current valve pressure
@ -520,6 +525,7 @@ void check_axes_activity()
analogWrite(HEATER_2_PIN,tail_e_to_p_pressure);
}
#endif
#endif
}
@ -593,8 +599,10 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
}
block->fan_speed = fanSpeed;
#ifdef BARICUDA
block->valve_pressure = ValvePressure;
block->e_to_p_pressure = EtoPPressure;
#endif
// Compute direction bits for this block
block->direction_bits = 0;

2
Marlin/planner.h
View File

@ -60,8 +60,10 @@ typedef struct {
unsigned long final_rate; // The minimal rate at exit
unsigned long acceleration_st; // acceleration steps/sec^2
unsigned long fan_speed;
#ifdef BARICUDA
unsigned long valve_pressure;
unsigned long e_to_p_pressure;
#endif
volatile char busy;
} block_t;