CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #5963 from thinkyhead/rc_no_offsets_optim

Browse Source 
New option: NO_WORKSPACE_OFFSETS
This commit is contained in:
Scott Lahteine 2017-03-05 21:46:49 -06:00 committed by GitHub
commit be98016674
23 changed files with 401 additions and 179 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View File

@ -1169,4 +1169,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

46
Marlin/Marlin.h
View File

@ -275,27 +275,19 @@ extern volatile bool wait_for_heatup;
#endif
extern float current_position[NUM_AXIS];
extern float position_shift[XYZ];
extern float home_offset[XYZ];
#if HOTENDS > 1
extern float hotend_offset[XYZ][HOTENDS];
#endif
// Software Endstops
void update_software_endstops(AxisEnum axis);
#if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
extern bool soft_endstops_enabled;
void clamp_to_software_endstops(float target[XYZ]);
// Workspace offsets
#if DISABLED(NO_WORKSPACE_OFFSETS)
extern float position_shift[XYZ],
home_offset[XYZ],
workspace_offset[XYZ];
#define LOGICAL_POSITION(POS, AXIS) ((POS) + workspace_offset[AXIS])
#define RAW_POSITION(POS, AXIS) ((POS) - workspace_offset[AXIS])
#else
#define soft_endstops_enabled false
#define clamp_to_software_endstops(x) NOOP
#define LOGICAL_POSITION(POS, AXIS) (POS)
#define RAW_POSITION(POS, AXIS) (POS)
#endif
extern float soft_endstop_min[XYZ];
extern float soft_endstop_max[XYZ];
#define LOGICAL_POSITION(POS, AXIS) ((POS) + home_offset[AXIS] + position_shift[AXIS])
#define RAW_POSITION(POS, AXIS) ((POS) - home_offset[AXIS] - position_shift[AXIS])
#define LOGICAL_X_POSITION(POS) LOGICAL_POSITION(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) LOGICAL_POSITION(POS, Y_AXIS)
#define LOGICAL_Z_POSITION(POS) LOGICAL_POSITION(POS, Z_AXIS)
@ -304,6 +296,26 @@ extern float soft_endstop_max[XYZ];
#define RAW_Z_POSITION(POS) RAW_POSITION(POS, Z_AXIS)
#define RAW_CURRENT_POSITION(AXIS) RAW_POSITION(current_position[AXIS], AXIS)
#if HOTENDS > 1
extern float hotend_offset[XYZ][HOTENDS];
#endif
// Software Endstops
extern float soft_endstop_min[XYZ];
extern float soft_endstop_max[XYZ];
#if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
extern bool soft_endstops_enabled;
void clamp_to_software_endstops(float target[XYZ]);
#else
#define soft_endstops_enabled false
#define clamp_to_software_endstops(x) NOOP
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
void update_software_endstops(const AxisEnum axis);
#endif
// GCode support for external objects
bool code_seen(char);
int code_value_int();

79
Marlin/Marlin_main.cpp
View File

@ -396,6 +396,8 @@ bool axis_relative_modes[] = AXIS_RELATIVE_MODES,
float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA),
volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0);
#if DISABLED(NO_WORKSPACE_OFFSETS)
// The distance that XYZ has been offset by G92. Reset by G28.
float position_shift[XYZ] = { 0 };
@ -403,6 +405,11 @@ float position_shift[XYZ] = { 0 };
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[XYZ] = { 0 };
// The above two are combined to save on computes
float workspace_offset[XYZ] = { 0 };
#endif
// Software Endstops are based on the configured limits.
#if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
bool soft_endstops_enabled = true;
@ -1333,6 +1340,8 @@ bool get_target_extruder_from_command(int code) {
#endif // DUAL_X_CARRIAGE
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
/**
* Software endstops can be used to monitor the open end of
* an axis that has a hardware endstop on the other end. Or
@ -1342,8 +1351,8 @@ bool get_target_extruder_from_command(int code) {
* the software endstop positions must be refreshed to remain
* at the same positions relative to the machine.
*/
void update_software_endstops(AxisEnum axis) {
float offs = LOGICAL_POSITION(0, axis);
void update_software_endstops(const AxisEnum axis) {
const float offs = workspace_offset[axis] = LOGICAL_POSITION(0, axis);
#if ENABLED(DUAL_X_CARRIAGE)
if (axis == X_AXIS) {
@ -1376,8 +1385,10 @@ void update_software_endstops(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("For ", axis_codes[axis]);
#if DISABLED(NO_WORKSPACE_OFFSETS)
SERIAL_ECHOPAIR(" axis:\n home_offset = ", home_offset[axis]);
SERIAL_ECHOPAIR("\n position_shift = ", position_shift[axis]);
#endif
SERIAL_ECHOPAIR("\n soft_endstop_min = ", soft_endstop_min[axis]);
SERIAL_ECHOLNPAIR("\n soft_endstop_max = ", soft_endstop_max[axis]);
}
@ -1387,9 +1398,11 @@ void update_software_endstops(AxisEnum axis) {
if (axis == Z_AXIS)
delta_clip_start_height = soft_endstop_max[axis] - delta_safe_distance_from_top();
#endif
}
#endif // NO_WORKSPACE_OFFSETS
#if DISABLED(NO_WORKSPACE_OFFSETS)
/**
* Change the home offset for an axis, update the current
* position and the software endstops to retain the same
@ -1398,11 +1411,12 @@ void update_software_endstops(AxisEnum axis) {
* Since this changes the current_position, code should
* call sync_plan_position soon after this.
*/
static void set_home_offset(AxisEnum axis, float v) {
static void set_home_offset(const AxisEnum axis, const float v) {
current_position[axis] += v - home_offset[axis];
home_offset[axis] = v;
update_software_endstops(axis);
}
#endif // NO_WORKSPACE_OFFSETS
/**
* Set an axis' current position to its home position (after homing).
@ -1433,8 +1447,10 @@ static void set_axis_is_at_home(AxisEnum axis) {
axis_known_position[axis] = axis_homed[axis] = true;
#if DISABLED(NO_WORKSPACE_OFFSETS)
position_shift[axis] = 0;
update_software_endstops(axis);
#endif
#if ENABLED(DUAL_X_CARRIAGE)
if (axis == X_AXIS && (active_extruder == 1 || dual_x_carriage_mode == DXC_DUPLICATION_MODE)) {
@ -1507,8 +1523,10 @@ static void set_axis_is_at_home(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
#if DISABLED(NO_WORKSPACE_OFFSETS)
SERIAL_ECHOPAIR("> home_offset[", axis_codes[axis]);
SERIAL_ECHOLNPAIR("] = ", home_offset[axis]);
#endif
DEBUG_POS("", current_position);
SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", axis_codes[axis]);
SERIAL_CHAR(')');
@ -1549,8 +1567,8 @@ inline void line_to_destination(float fr_mm_s) {
}
inline void line_to_destination() { line_to_destination(feedrate_mm_s); }
inline void set_current_to_destination() { memcpy(current_position, destination, sizeof(current_position)); }
inline void set_destination_to_current() { memcpy(destination, current_position, sizeof(destination)); }
inline void set_current_to_destination() { COPY(current_position, destination); }
inline void set_destination_to_current() { COPY(destination, current_position); }
#if IS_KINEMATIC
/**
@ -3557,7 +3575,7 @@ inline void gcode_G28() {
HOMEAXIS(X);
// Consider the active extruder to be parked
memcpy(raised_parked_position, current_position, sizeof(raised_parked_position));
COPY(raised_parked_position, current_position);
delayed_move_time = 0;
active_extruder_parked = true;
@ -4357,7 +4375,7 @@ inline void gcode_G28() {
#endif
float converted[XYZ];
memcpy(converted, current_position, sizeof(converted));
COPY(converted, current_position);
planner.abl_enabled = true;
planner.unapply_leveling(converted); // use conversion machinery
@ -4379,7 +4397,7 @@ inline void gcode_G28() {
}
// The rotated XY and corrected Z are now current_position
memcpy(current_position, converted, sizeof(converted));
COPY(current_position, converted);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position);
@ -4595,8 +4613,10 @@ inline void gcode_G92() {
if (i != E_AXIS) {
didXYZ = true;
#if DISABLED(NO_WORKSPACE_OFFSETS)
position_shift[i] += v - p; // Offset the coordinate space
update_software_endstops((AxisEnum)i);
#endif
}
#endif
}
@ -6326,6 +6346,8 @@ inline void gcode_M205() {
if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_axis_units(E_AXIS);
}
#if DISABLED(NO_WORKSPACE_OFFSETS)
/**
* M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y
*/
@ -6343,6 +6365,8 @@ inline void gcode_M206() {
report_current_position();
}
#endif // NO_WORKSPACE_OFFSETS
#if ENABLED(DELTA)
/**
* M665: Set delta configurations
@ -7165,6 +7189,8 @@ void quickstop_stepper() {
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
/**
* M428: Set home_offset based on the distance between the
* current_position and the nearest "reference point."
@ -7205,6 +7231,8 @@ inline void gcode_M428() {
}
}
#endif // NO_WORKSPACE_OFFSETS
/**
* M500: Store settings in EEPROM
*/
@ -7929,7 +7957,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
break;
case DXC_AUTO_PARK_MODE:
// record raised toolhead position for use by unpark
memcpy(raised_parked_position, current_position, sizeof(raised_parked_position));
COPY(raised_parked_position, current_position);
raised_parked_position[Z_AXIS] += TOOLCHANGE_UNPARK_ZLIFT;
#if ENABLED(max_software_endstops)
NOMORE(raised_parked_position[Z_AXIS], soft_endstop_max[Z_AXIS]);
@ -8073,10 +8101,14 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
// The newly-selected extruder XY is actually at...
current_position[X_AXIS] += xydiff[X_AXIS];
current_position[Y_AXIS] += xydiff[Y_AXIS];
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE)
for (uint8_t i = X_AXIS; i <= Y_AXIS; i++) {
#if DISABLED(NO_WORKSPACE_OFFSETS)
position_shift[i] += xydiff[i];
#endif
update_software_endstops((AxisEnum)i);
}
#endif
// Set the new active extruder
active_extruder = tmp_extruder;
@ -8631,9 +8663,12 @@ void process_next_command() {
case 205: //M205: Set advanced settings
gcode_M205();
break;
#if DISABLED(NO_WORKSPACE_OFFSETS)
case 206: // M206: Set home offsets
gcode_M206();
break;
#endif
#if ENABLED(DELTA)
case 665: // M665: Set delta configurations
@ -8797,9 +8832,11 @@ void process_next_command() {
break;
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
case 428: // M428: Apply current_position to home_offset
gcode_M428();
break;
#endif
case 500: // M500: Store settings in EEPROM
gcode_M500();
@ -9287,7 +9324,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
planner.unapply_leveling(cartes);
#endif
if (axis == ALL_AXES)
memcpy(current_position, cartes, sizeof(cartes));
COPY(current_position, cartes);
else
current_position[axis] = cartes[axis];
}
@ -9322,14 +9359,14 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Split at the left/front border of the right/top square
int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2);
if (cx2 != cx1 && TEST(x_splits, gcx)) {
memcpy(end, destination, sizeof(end));
COPY(end, destination);
destination[X_AXIS] = LOGICAL_X_POSITION(mbl.get_probe_x(gcx));
normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]);
destination[Y_AXIS] = MBL_SEGMENT_END(Y);
CBI(x_splits, gcx);
}
else if (cy2 != cy1 && TEST(y_splits, gcy)) {
memcpy(end, destination, sizeof(end));
COPY(end, destination);
destination[Y_AXIS] = LOGICAL_Y_POSITION(mbl.get_probe_y(gcy));
normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]);
destination[X_AXIS] = MBL_SEGMENT_END(X);
@ -9349,7 +9386,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
mesh_line_to_destination(fr_mm_s, x_splits, y_splits);
// Restore destination from stack
memcpy(destination, end, sizeof(end));
COPY(destination, end);
mesh_line_to_destination(fr_mm_s, x_splits, y_splits);
}
@ -9385,14 +9422,14 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Split at the left/front border of the right/top square
int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2);
if (cx2 != cx1 && TEST(x_splits, gcx)) {
memcpy(end, destination, sizeof(end));
COPY(end, destination);
destination[X_AXIS] = LOGICAL_X_POSITION(bilinear_start[X_AXIS] + ABL_BG_SPACING(X_AXIS) * gcx);
normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]);
destination[Y_AXIS] = LINE_SEGMENT_END(Y);
CBI(x_splits, gcx);
}
else if (cy2 != cy1 && TEST(y_splits, gcy)) {
memcpy(end, destination, sizeof(end));
COPY(end, destination);
destination[Y_AXIS] = LOGICAL_Y_POSITION(bilinear_start[Y_AXIS] + ABL_BG_SPACING(Y_AXIS) * gcy);
normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]);
destination[X_AXIS] = LINE_SEGMENT_END(X);
@ -9412,7 +9449,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
bilinear_line_to_destination(fr_mm_s, x_splits, y_splits);
// Restore destination from stack
memcpy(destination, end, sizeof(end));
COPY(destination, end);
bilinear_line_to_destination(fr_mm_s, x_splits, y_splits);
}
@ -9507,7 +9544,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Get the logical current position as starting point
float logical[XYZE];
memcpy(logical, current_position, sizeof(logical));
COPY(logical, current_position);
#define DELTA_VAR logical
@ -10480,8 +10517,12 @@ void setup() {
// This also updates variables in the planner, elsewhere
Config_RetrieveSettings();
#if DISABLED(NO_WORKSPACE_OFFSETS)
// Initialize current position based on home_offset
memcpy(current_position, home_offset, sizeof(home_offset));
COPY(current_position, home_offset);
#else
ZERO(current_position);
#endif
// Vital to init stepper/planner equivalent for current_position
SYNC_PLAN_POSITION_KINEMATIC();

4
Marlin/Version.h
View File

@ -61,7 +61,9 @@
#define REQUIRED_CONFIGURATION_ADV_H_VERSION 010100
/**
* @todo: Missing documentation block
* The protocol for communication to the host. Protocol indicates communication
* standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
* (Other behaviors are given by the firmware version and capabilities report.)
*/
#define PROTOCOL_VERSION "1.0"

15
Marlin/configuration_store.cpp
View File

@ -171,8 +171,10 @@ void Config_Postprocess() {
calculate_volumetric_multipliers();
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
// Software endstops depend on home_offset
LOOP_XYZ(i) update_software_endstops((AxisEnum)i);
#endif
}
#if ENABLED(EEPROM_SETTINGS)
@ -251,6 +253,9 @@ void Config_Postprocess() {
EEPROM_WRITE(planner.min_travel_feedrate_mm_s);
EEPROM_WRITE(planner.min_segment_time);
EEPROM_WRITE(planner.max_jerk);
#if ENABLED(NO_WORKSPACE_OFFSETS)
float home_offset[XYZ] = { 0 };
#endif
EEPROM_WRITE(home_offset);
#if HOTENDS > 1
@ -501,6 +506,10 @@ void Config_Postprocess() {
EEPROM_READ(planner.min_travel_feedrate_mm_s);
EEPROM_READ(planner.min_segment_time);
EEPROM_READ(planner.max_jerk);
#if ENABLED(NO_WORKSPACE_OFFSETS)
float home_offset[XYZ];
#endif
EEPROM_READ(home_offset);
#if HOTENDS > 1
@ -729,7 +738,9 @@ void Config_ResetDefault() {
planner.max_jerk[Y_AXIS] = DEFAULT_YJERK;
planner.max_jerk[Z_AXIS] = DEFAULT_ZJERK;
planner.max_jerk[E_AXIS] = DEFAULT_EJERK;
home_offset[X_AXIS] = home_offset[Y_AXIS] = home_offset[Z_AXIS] = 0;
#if DISABLED(NO_WORKSPACE_OFFSETS)
ZERO(home_offset);
#endif
#if HOTENDS > 1
constexpr float tmp4[XYZ][HOTENDS] = {
@ -940,6 +951,7 @@ void Config_ResetDefault() {
SERIAL_ECHOPAIR(" E", planner.max_jerk[E_AXIS]);
SERIAL_EOL;
#if DISABLED(NO_WORKSPACE_OFFSETS)
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Home offset (mm)");
@ -949,6 +961,7 @@ void Config_ResetDefault() {
SERIAL_ECHOPAIR(" Y", home_offset[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", home_offset[Z_AXIS]);
SERIAL_EOL;
#endif
#if HOTENDS > 1
CONFIG_ECHO_START;

9
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -1149,4 +1149,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -1179,4 +1179,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/K8400/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -1174,4 +1174,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -1168,4 +1168,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -1168,4 +1168,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -1173,4 +1173,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -1168,4 +1168,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

9
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -1166,4 +1166,13 @@
*/
//#define VOLUMETRIC_DEFAULT_ON
/**
* Enable this option for a leaner build of Marlin that removes all
* workspace offsets, simplifying coordinate transformations, leveling, etc.
*
* - M206 and M428 are disabled.
* - G92 will revert to its behavior from Marlin 1.0.
*/
//#define NO_WORKSPACE_OFFSETS
#endif // CONFIGURATION_ADV_H

1
Marlin/macros.h
View File

@ -79,6 +79,7 @@
#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-')
#define COUNT(a) (sizeof(a)/sizeof(*a))
#define ZERO(a) memset(a,0,sizeof(a))
#define COPY(a,b) memcpy(a,b,min(sizeof(a),sizeof(b)))
// Macros for initializing arrays
#define ARRAY_6(v1, v2, v3, v4, v5, v6, ...) { v1, v2, v3, v4, v5, v6 }

4
Marlin/planner.cpp
View File

@ -1298,7 +1298,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
block->flag |= BLOCK_FLAG_RECALCULATE | (block->nominal_speed <= v_allowable ? BLOCK_FLAG_NOMINAL_LENGTH : 0);
// Update previous path unit_vector and nominal speed
memcpy(previous_speed, current_speed, sizeof(previous_speed));
COPY(previous_speed, current_speed);
previous_nominal_speed = block->nominal_speed;
previous_safe_speed = safe_speed;
@ -1360,7 +1360,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
block_buffer_head = next_buffer_head;
// Update the position (only when a move was queued)
memcpy(position, target, sizeof(position));
COPY(position, target);
#if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = a;
position_float[Y_AXIS] = b;