CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Digipots refactor / cleanup (#19690)

Browse Source
This commit is contained in:
Scott Lahteine 2020-10-11 14:58:35 -05:00 committed by Scott Lahteine
parent 4ee717f7c4
commit beb17d8855
23 changed files with 240 additions and 187 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/DUE/fastio/G2_PWM.cpp
View File

@ -154,7 +154,7 @@ void Stepper::digipot_init() {
NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0)); // normal priority for PWM module (can stand some jitter on the Vref signals)
}
void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init(); // Init PWM system if needed

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@ -191,7 +191,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
//
// Flag any i2c pin conflicts
//
#if ANY(HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
#if ANY(HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
#define USEDI2CDEV_M 1 // <Arduino>/Wire.cpp
#if USEDI2CDEV_M == 0 // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)

12
Marlin/src/MarlinCore.cpp
View File

@ -97,7 +97,7 @@
#include "feature/closedloop.h"
#endif
#if HAS_I2C_DIGIPOT
#if HAS_MOTOR_CURRENT_I2C
#include "feature/digipot/digipot.h"
#endif
@ -125,7 +125,7 @@
#include "module/servo.h"
#endif
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#include "feature/dac/stepper_dac.h"
#endif
@ -1137,12 +1137,12 @@ void setup() {
SETUP_RUN(enableStepperDrivers());
#endif
#if HAS_I2C_DIGIPOT
SETUP_RUN(digipot_i2c_init());
#if HAS_MOTOR_CURRENT_I2C
SETUP_RUN(digipot_i2c.init());
#endif
#if ENABLED(DAC_STEPPER_CURRENT)
SETUP_RUN(dac_init());
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
SETUP_RUN(stepper_dac.init());
#endif
#if EITHER(Z_PROBE_SLED, SOLENOID_PROBE) && HAS_SOLENOID_1

50
Marlin/src/feature/dac/dac_mcp4728.cpp
View File

@ -32,16 +32,18 @@
#include "../../inc/MarlinConfig.h"
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#include "dac_mcp4728.h"
xyze_uint_t mcp4728_values;
MCP4728 mcp4728;
xyze_uint_t dac_values;
/**
* Begin I2C, get current values (input register and eeprom) of mcp4728
*/
void mcp4728_init() {
void MCP4728::init() {
Wire.begin();
Wire.requestFrom(I2C_ADDRESS(DAC_DEV_ADDRESS), uint8_t(24));
while (Wire.available()) {
@ -50,7 +52,7 @@ void mcp4728_init() {
loByte = Wire.read();
if (!(deviceID & 0x08))
mcp4728_values[(deviceID & 0x30) >> 4] = word((hiByte & 0x0F), loByte);
dac_values[(deviceID & 0x30) >> 4] = word((hiByte & 0x0F), loByte);
}
}
@ -58,9 +60,9 @@ void mcp4728_init() {
* Write input resister value to specified channel using fastwrite method.
* Channel : 0-3, Values : 0-4095
*/
uint8_t mcp4728_analogWrite(const uint8_t channel, const uint16_t value) {
mcp4728_values[channel] = value;
return mcp4728_fastWrite();
uint8_t MCP4728::analogWrite(const uint8_t channel, const uint16_t value) {
dac_values[channel] = value;
return fastWrite();
}
/**
@ -68,12 +70,12 @@ uint8_t mcp4728_analogWrite(const uint8_t channel, const uint16_t value) {
* This will update both input register and EEPROM value
* This will also write current Vref, PowerDown, Gain settings to EEPROM
*/
uint8_t mcp4728_eepromWrite() {
uint8_t MCP4728::eepromWrite() {
Wire.beginTransmission(I2C_ADDRESS(DAC_DEV_ADDRESS));
Wire.write(SEQWRITE);
LOOP_XYZE(i) {
Wire.write(DAC_STEPPER_VREF << 7 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[i]));
Wire.write(lowByte(mcp4728_values[i]));
Wire.write(DAC_STEPPER_VREF << 7 | DAC_STEPPER_GAIN << 4 | highByte(dac_values[i]));
Wire.write(lowByte(dac_values[i]));
}
return Wire.endTransmission();
}
@ -81,7 +83,7 @@ uint8_t mcp4728_eepromWrite() {
/**
* Write Voltage reference setting to all input regiters
*/
uint8_t mcp4728_setVref_all(const uint8_t value) {
uint8_t MCP4728::setVref_all(const uint8_t value) {
Wire.beginTransmission(I2C_ADDRESS(DAC_DEV_ADDRESS));
Wire.write(VREFWRITE | (value ? 0x0F : 0x00));
return Wire.endTransmission();
@ -89,7 +91,7 @@ uint8_t mcp4728_setVref_all(const uint8_t value) {
/**
* Write Gain setting to all input regiters
*/
uint8_t mcp4728_setGain_all(const uint8_t value) {
uint8_t MCP4728::setGain_all(const uint8_t value) {
Wire.beginTransmission(I2C_ADDRESS(DAC_DEV_ADDRESS));
Wire.write(GAINWRITE | (value ? 0x0F : 0x00));
return Wire.endTransmission();
@ -98,16 +100,16 @@ uint8_t mcp4728_setGain_all(const uint8_t value) {
/**
* Return Input Register value
*/
uint16_t mcp4728_getValue(const uint8_t channel) { return mcp4728_values[channel]; }
uint16_t MCP4728::getValue(const uint8_t channel) { return dac_values[channel]; }
#if 0
/**
* Steph: Might be useful in the future
* Return Vout
*/
uint16_t mcp4728_getVout(const uint8_t channel) {
uint16_t MCP4728::getVout(const uint8_t channel) {
const uint32_t vref = 2048,
vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
vOut = (vref * dac_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
return _MIN(vOut, defaultVDD);
}
#endif
@ -115,15 +117,15 @@ uint16_t mcp4728_getVout(const uint8_t channel) {
/**
* Returns DAC values as a 0-100 percentage of drive strength
*/
uint8_t mcp4728_getDrvPct(const uint8_t channel) { return uint8_t(100.0 * mcp4728_values[channel] / (DAC_STEPPER_MAX) + 0.5); }
uint8_t MCP4728::getDrvPct(const uint8_t channel) { return uint8_t(100.0 * dac_values[channel] / (DAC_STEPPER_MAX) + 0.5); }
/**
* Receives all Drive strengths as 0-100 percent values, updates
* DAC Values array and calls fastwrite to update the DAC.
*/
void mcp4728_setDrvPct(xyze_uint8_t &pct) {
mcp4728_values *= 0.01 * pct * (DAC_STEPPER_MAX);
mcp4728_fastWrite();
void MCP4728::setDrvPct(xyze_uint8_t &pct) {
dac_values *= 0.01 * pct * (DAC_STEPPER_MAX);
fastWrite();
}
/**
@ -131,11 +133,11 @@ void mcp4728_setDrvPct(xyze_uint8_t &pct) {
* DAC Input and PowerDown bits update.
* No EEPROM update
*/
uint8_t mcp4728_fastWrite() {
uint8_t MCP4728::fastWrite() {
Wire.beginTransmission(I2C_ADDRESS(DAC_DEV_ADDRESS));
LOOP_XYZE(i) {
Wire.write(highByte(mcp4728_values[i]));
Wire.write(lowByte(mcp4728_values[i]));
Wire.write(highByte(dac_values[i]));
Wire.write(lowByte(dac_values[i]));
}
return Wire.endTransmission();
}
@ -143,10 +145,10 @@ uint8_t mcp4728_fastWrite() {
/**
* Common function for simple general commands
*/
uint8_t mcp4728_simpleCommand(const byte simpleCommand) {
uint8_t MCP4728::simpleCommand(const byte simpleCommand) {
Wire.beginTransmission(I2C_ADDRESS(GENERALCALL));
Wire.write(simpleCommand);
return Wire.endTransmission();
}
#endif // DAC_STEPPER_CURRENT
#endif // HAS_MOTOR_CURRENT_DAC

25
Marlin/src/feature/dac/dac_mcp4728.h
View File

@ -65,13 +65,18 @@
// DAC_OR_ADDRESS defined in pins_BOARD.h file
#define DAC_DEV_ADDRESS (BASE_ADDR | DAC_OR_ADDRESS)
void mcp4728_init();
uint8_t mcp4728_analogWrite(const uint8_t channel, const uint16_t value);
uint8_t mcp4728_eepromWrite();
uint8_t mcp4728_setVref_all(const uint8_t value);
uint8_t mcp4728_setGain_all(const uint8_t value);
uint16_t mcp4728_getValue(const uint8_t channel);
uint8_t mcp4728_fastWrite();
uint8_t mcp4728_simpleCommand(const byte simpleCommand);
uint8_t mcp4728_getDrvPct(const uint8_t channel);
void mcp4728_setDrvPct(xyze_uint8_t &pct);
class MCP4728 {
public:
static void init();
static uint8_t analogWrite(const uint8_t channel, const uint16_t value);
static uint8_t eepromWrite();
static uint8_t setVref_all(const uint8_t value);
static uint8_t setGain_all(const uint8_t value);
static uint16_t getValue(const uint8_t channel);
static uint8_t fastWrite();
static uint8_t simpleCommand(const byte simpleCommand);
static uint8_t getDrvPct(const uint8_t channel);
static void setDrvPct(xyze_uint8_t &pct);
};
extern MCP4728 mcp4728;

57
Marlin/src/feature/dac/stepper_dac.cpp
View File

@ -26,7 +26,7 @@
#include "../../inc/MarlinConfig.h"
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#include "stepper_dac.h"
#include "../../MarlinCore.h" // for SP_X_LBL...
@ -35,56 +35,53 @@ bool dac_present = false;
constexpr xyze_uint8_t dac_order = DAC_STEPPER_ORDER;
xyze_uint8_t dac_channel_pct = DAC_MOTOR_CURRENT_DEFAULT;
int dac_init() {
StepperDAC stepper_dac;
int StepperDAC::init() {
#if PIN_EXISTS(DAC_DISABLE)
OUT_WRITE(DAC_DISABLE_PIN, LOW); // set pin low to enable DAC
#endif
mcp4728_init();
mcp4728.init();
if (mcp4728_simpleCommand(RESET)) return -1;
if (mcp4728.simpleCommand(RESET)) return -1;
dac_present = true;
mcp4728_setVref_all(DAC_STEPPER_VREF);
mcp4728_setGain_all(DAC_STEPPER_GAIN);
mcp4728.setVref_all(DAC_STEPPER_VREF);
mcp4728.setGain_all(DAC_STEPPER_GAIN);
if (mcp4728_getDrvPct(0) < 1 || mcp4728_getDrvPct(1) < 1 || mcp4728_getDrvPct(2) < 1 || mcp4728_getDrvPct(3) < 1 ) {
mcp4728_setDrvPct(dac_channel_pct);
mcp4728_eepromWrite();
if (mcp4728.getDrvPct(0) < 1 || mcp4728.getDrvPct(1) < 1 || mcp4728.getDrvPct(2) < 1 || mcp4728.getDrvPct(3) < 1 ) {
mcp4728.setDrvPct(dac_channel_pct);
mcp4728.eepromWrite();
}
return 0;
}
void dac_current_percent(uint8_t channel, float val) {
if (!dac_present) return;
NOMORE(val, 100);
mcp4728_analogWrite(dac_order[channel], val * 0.01 * (DAC_STEPPER_MAX));
mcp4728_simpleCommand(UPDATE);
}
void dac_current_raw(uint8_t channel, uint16_t val) {
void StepperDAC::set_current_value(const uint8_t channel, uint16_t val) {
if (!dac_present) return;
NOMORE(val, uint16_t(DAC_STEPPER_MAX));
mcp4728_analogWrite(dac_order[channel], val);
mcp4728_simpleCommand(UPDATE);
mcp4728.analogWrite(dac_order[channel], val);
mcp4728.simpleCommand(UPDATE);
}
static float dac_perc(int8_t n) { return 100.0 * mcp4728_getValue(dac_order[n]) * RECIPROCAL(DAC_STEPPER_MAX); }
static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * RECIPROCAL(DAC_STEPPER_SENSE); }
void StepperDAC::set_current_percent(const uint8_t channel, float val) {
set_current_value(channel, _MIN(val, 100.0f) * (DAC_STEPPER_MAX) / 100.0f);
}
uint8_t dac_current_get_percent(const AxisEnum axis) { return mcp4728_getDrvPct(dac_order[axis]); }
void dac_current_set_percents(xyze_uint8_t &pct) {
static float dac_perc(int8_t n) { return 100.0 * mcp4728.getValue(dac_order[n]) * RECIPROCAL(DAC_STEPPER_MAX); }
static float dac_amps(int8_t n) { return mcp4728.getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * RECIPROCAL(DAC_STEPPER_SENSE); }
uint8_t StepperDAC::get_current_percent(const AxisEnum axis) { return mcp4728.getDrvPct(dac_order[axis]); }
void StepperDAC::set_current_percents(xyze_uint8_t &pct) {
LOOP_XYZE(i) dac_channel_pct[i] = pct[dac_order[i]];
mcp4728_setDrvPct(dac_channel_pct);
mcp4728.setDrvPct(dac_channel_pct);
}
void dac_print_values() {
void StepperDAC::print_values() {
if (!dac_present) return;
SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
SERIAL_ECHO_START();
@ -94,9 +91,9 @@ void dac_print_values() {
SERIAL_ECHOLNPAIR_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")"));
}
void dac_commit_eeprom() {
void StepperDAC::commit_eeprom() {
if (!dac_present) return;
mcp4728_eepromWrite();
mcp4728.eepromWrite();
}
#endif // DAC_STEPPER_CURRENT
#endif // HAS_MOTOR_CURRENT_DAC

19
Marlin/src/feature/dac/stepper_dac.h
View File

@ -27,10 +27,15 @@
#include "dac_mcp4728.h"
int dac_init();
void dac_current_percent(uint8_t channel, float val);
void dac_current_raw(uint8_t channel, uint16_t val);
void dac_print_values();
void dac_commit_eeprom();
uint8_t dac_current_get_percent(AxisEnum axis);
void dac_current_set_percents(xyze_uint8_t &pct);
class StepperDAC {
public:
static int init();
static void set_current_percent(const uint8_t channel, float val);
static void set_current_value(const uint8_t channel, uint16_t val);
static void print_values();
static void commit_eeprom();
static uint8_t get_current_percent(AxisEnum axis);
static void set_current_percents(xyze_uint8_t &pct);
};
extern StepperDAC stepper_dac;

12
Marlin/src/feature/digipot/digipot.h
View File

@ -21,5 +21,13 @@
*/
#pragma once
void digipot_i2c_set_current(const uint8_t channel, const float current);
void digipot_i2c_init();
//
// Header for MCP4018 and MCP4451 current control i2c devices
//
class DigipotI2C {
public:
static void init();
static void set_current(const uint8_t channel, const float current);
};
DigipotI2C digipot_i2c;

12
Marlin/src/feature/digipot/digipot_mcp4018.cpp
View File

@ -24,6 +24,8 @@
#if ENABLED(DIGIPOT_MCP4018)
#include "digipot.h"
#include <Stream.h>
#include <SlowSoftI2CMaster.h> // https://github.com/stawel/SlowSoftI2CMaster
@ -68,7 +70,7 @@ static SlowSoftI2CMaster pots[DIGIPOT_I2C_NUM_CHANNELS] = {
#endif
};
static void i2c_send(const uint8_t channel, const byte v) {
static void digipot_i2c_send(const uint8_t channel, const byte v) {
if (WITHIN(channel, 0, DIGIPOT_I2C_NUM_CHANNELS - 1)) {
pots[channel].i2c_start(((DIGIPOT_I2C_ADDRESS_A) << 1) | I2C_WRITE);
pots[channel].i2c_write(v);
@ -77,12 +79,12 @@ static void i2c_send(const uint8_t channel, const byte v) {
}
// This is for the MCP4018 I2C based digipot
void digipot_i2c_set_current(const uint8_t channel, const float current) {
void DigipotI2C::set_current(const uint8_t channel, const float current) {
const float ival = _MIN(_MAX(current, 0), float(DIGIPOT_MCP4018_MAX_VALUE));
i2c_send(channel, current_to_wiper(ival));
digipot_i2c_send(channel, current_to_wiper(ival));
}
void digipot_i2c_init() {
void DigipotI2C::init() {
LOOP_L_N(i, DIGIPOT_I2C_NUM_CHANNELS) pots[i].i2c_init();
// Init currents according to Configuration_adv.h
@ -94,7 +96,7 @@ void digipot_i2c_init() {
#endif
;
LOOP_L_N(i, COUNT(digipot_motor_current))
digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
set_current(i, pgm_read_float(&digipot_motor_current[i]));
}
#endif // DIGIPOT_MCP4018

8
Marlin/src/feature/digipot/digipot_mcp4451.cpp
View File

@ -24,6 +24,8 @@
#if ENABLED(DIGIPOT_MCP4451)
#include "digipot.h"
#include <Stream.h>
#include <Wire.h>
@ -61,7 +63,7 @@ static void digipot_i2c_send(const byte addr, const byte a, const byte b) {
}
// This is for the MCP4451 I2C based digipot
void digipot_i2c_set_current(const uint8_t channel, const float current) {
void DigipotI2C::set_current(const uint8_t channel, const float current) {
// These addresses are specific to Azteeg X3 Pro, can be set to others.
// In this case first digipot is at address A0=0, A1=0, second one is at A0=0, A1=1
const byte addr = channel < 4 ? DIGIPOT_I2C_ADDRESS_A : DIGIPOT_I2C_ADDRESS_B; // channel 0-3 vs 4-7
@ -75,7 +77,7 @@ void digipot_i2c_set_current(const uint8_t channel, const float current) {
digipot_i2c_send(addr, addresses[channel & 0x3], current_to_wiper(_MIN(float(_MAX(current, 0)), DIGIPOT_I2C_MAX_CURRENT)));
}
void digipot_i2c_init() {
void DigipotI2C::init() {
#if MB(MKS_SBASE)
configure_i2c(16); // Set clock_option to 16 ensure I2C is initialized at 400kHz
#else
@ -90,7 +92,7 @@ void digipot_i2c_init() {
#endif
;
LOOP_L_N(i, COUNT(digipot_motor_current))
digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
set_current(i, pgm_read_float(&digipot_motor_current[i]));
}
#endif // DIGIPOT_MCP4451

52
Marlin/src/gcode/feature/digipot/M907-M910.cpp
View File

@ -22,19 +22,19 @@
#include "../../../inc/MarlinConfig.h"
#if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
#include "../../gcode.h"
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
#include "../../../module/stepper.h"
#endif
#if HAS_I2C_DIGIPOT
#if HAS_MOTOR_CURRENT_I2C
#include "../../../feature/digipot/digipot.h"
#endif
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#include "../../../feature/dac/stepper_dac.h"
#endif
@ -42,61 +42,61 @@
* M907: Set digital trimpot motor current using axis codes X, Y, Z, E, B, S
*/
void GcodeSuite::M907() {
#if HAS_DIGIPOTSS
#if HAS_MOTOR_CURRENT_SPI
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.digipot_current(i, parser.value_int());
if (parser.seenval('B')) stepper.digipot_current(4, parser.value_int());
if (parser.seenval('S')) LOOP_LE_N(i, 4) stepper.digipot_current(i, parser.value_int());
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.set_digipot_current(i, parser.value_int());
if (parser.seenval('B')) stepper.set_digipot_current(4, parser.value_int());
if (parser.seenval('S')) LOOP_LE_N(i, 4) stepper.set_digipot_current(i, parser.value_int());
#elif HAS_MOTOR_CURRENT_PWM
#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY)
if (parser.seenval('X') || parser.seenval('Y')) stepper.digipot_current(0, parser.value_int());
if (parser.seenval('X') || parser.seenval('Y')) stepper.set_digipot_current(0, parser.value_int());
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
if (parser.seenval('Z')) stepper.digipot_current(1, parser.value_int());
if (parser.seenval('Z')) stepper.set_digipot_current(1, parser.value_int());
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
if (parser.seenval('E')) stepper.digipot_current(2, parser.value_int());
if (parser.seenval('E')) stepper.set_digipot_current(2, parser.value_int());
#endif
#endif
#if HAS_I2C_DIGIPOT
#if HAS_MOTOR_CURRENT_I2C
// this one uses actual amps in floating point
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) digipot_i2c_set_current(i, parser.value_float());
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) digipot_i2c.set_current(i, parser.value_float());
// Additional extruders use B,C,D for channels 4,5,6.
// TODO: Change these parameters because 'E' is used. B<index>?
for (uint8_t i = E_AXIS + 1; i < DIGIPOT_I2C_NUM_CHANNELS; i++)
if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c_set_current(i, parser.value_float());
if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c.set_current(i, parser.value_float());
#endif
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
if (parser.seenval('S')) {
const float dac_percent = parser.value_float();
LOOP_LE_N(i, 4) dac_current_percent(i, dac_percent);
LOOP_LE_N(i, 4) stepper_dac.set_current_percent(i, dac_percent);
}
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) dac_current_percent(i, parser.value_float());
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper_dac.set_current_percent(i, parser.value_float());
#endif
}
#if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
/**
* M908: Control digital trimpot directly (M908 P<pin> S<current>)
*/
void GcodeSuite::M908() {
TERN_(HAS_DIGIPOTSS, stepper.digitalPotWrite(parser.intval('P'), parser.intval('S')));
TERN_(DAC_STEPPER_CURRENT, dac_current_raw(parser.byteval('P', -1), parser.ushortval('S', 0)));
TERN_(HAS_MOTOR_CURRENT_SPI, stepper.set_digipot_value_spi(parser.intval('P'), parser.intval('S')));
TERN_(HAS_MOTOR_CURRENT_DAC, stepper_dac.set_current_value(parser.byteval('P', -1), parser.ushortval('S', 0)));
}
#endif // HAS_DIGIPOTSS || DAC_STEPPER_CURRENT
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#if ENABLED(DAC_STEPPER_CURRENT)
void GcodeSuite::M909() { stepper_dac.print_values(); }
void GcodeSuite::M910() { stepper_dac.commit_eeprom(); }
void GcodeSuite::M909() { dac_print_values(); }
void GcodeSuite::M910() { dac_commit_eeprom(); }
#endif // HAS_MOTOR_CURRENT_DAC
#endif // DAC_STEPPER_CURRENT
#endif // HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_DAC
#endif // HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || HAS_I2C_DIGIPOT || DAC_STEPPER_CURRENT
#endif // HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM || HAS_MOTOR_CURRENT_I2C || HAS_MOTOR_CURRENT_DAC

6
Marlin/src/gcode/gcode.cpp
View File

@ -823,11 +823,11 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 900: M900(); break; // M900: Set advance K factor.
#endif
#if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
case 907: M907(); break; // M907: Set digital trimpot motor current using axis codes.
#if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
case 908: M908(); break; // M908: Control digital trimpot directly.
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
case 909: M909(); break; // M909: Print digipot/DAC current value
case 910: M910(); break; // M910: Commit digipot/DAC value to external EEPROM
#endif

12
Marlin/src/gcode/gcode.h
View File

@ -258,9 +258,9 @@
* M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
* M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
* M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT)
* M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT)
* M908 - Control digital trimpot directly. (Requires HAS_MOTOR_CURRENT_DAC or DIGIPOTSS_PIN)
* M909 - Print digipot/DAC current value. (Requires HAS_MOTOR_CURRENT_DAC)
* M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires HAS_MOTOR_CURRENT_DAC)
* M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
@ -848,11 +848,11 @@ private:
static void M918();
#endif
#if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
static void M907();
#if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
static void M908();
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
static void M909();
static void M910();
#endif

2
Marlin/src/inc/Conditionals_adv.h
View File

@ -175,7 +175,7 @@
#endif
#if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
#define HAS_I2C_DIGIPOT 1
#define HAS_MOTOR_CURRENT_I2C 1
#endif
// Multiple Z steppers

2
Marlin/src/inc/Conditionals_post.h
View File

@ -1976,7 +1976,7 @@
#define HAS_STEPPER_RESET 1
#endif
#if PIN_EXISTS(DIGIPOTSS)
#define HAS_DIGIPOTSS 1
#define HAS_MOTOR_CURRENT_SPI 1
#endif
#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
#define HAS_MOTOR_CURRENT_PWM 1

2
Marlin/src/inc/SanityCheck.h
View File

@ -2667,7 +2667,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
/**
* Digipot requirement
*/
#if HAS_I2C_DIGIPOT
#if HAS_MOTOR_CURRENT_I2C
#if BOTH(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
#error "Enable only one of DIGIPOT_MCP4018 or DIGIPOT_MCP4451."
#elif !MB(MKS_SBASE) \

8
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -58,16 +58,16 @@
void menu_tmc();
void menu_backlash();
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
#include "../../feature/dac/stepper_dac.h"
void menu_dac() {
static xyze_uint8_t driverPercent;
LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i);
LOOP_XYZE(i) driverPercent[i] = stepper_dac.get_current_percent((AxisEnum)i);
START_MENU();
BACK_ITEM(MSG_ADVANCED_SETTINGS);
#define EDIT_DAC_PERCENT(A) EDIT_ITEM(uint8, MSG_DAC_PERCENT_##A, &driverPercent[_AXIS(A)], 0, 100, []{ dac_current_set_percents(driverPercent); })
#define EDIT_DAC_PERCENT(A) EDIT_ITEM(uint8, MSG_DAC_PERCENT_##A, &driverPercent[_AXIS(A)], 0, 100, []{ stepper_dac.set_current_percents(driverPercent); })
EDIT_DAC_PERCENT(X);
EDIT_DAC_PERCENT(Y);
EDIT_DAC_PERCENT(Z);
@ -568,7 +568,7 @@ void menu_advanced_settings() {
SUBMENU(MSG_BACKLASH, menu_backlash);
#endif
#if ENABLED(DAC_STEPPER_CURRENT)
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
SUBMENU(MSG_DRIVE_STRENGTH, menu_dac);
#endif
#if HAS_MOTOR_CURRENT_PWM

59
Marlin/src/module/settings.cpp
View File

@ -36,7 +36,7 @@
*/
// Change EEPROM version if the structure changes
#define EEPROM_VERSION "V81"
#define EEPROM_VERSION "V82"
#define EEPROM_OFFSET 100
// Check the integrity of data offsets.
@ -365,7 +365,10 @@ typedef struct SettingsDataStruct {
//
// HAS_MOTOR_CURRENT_PWM
//
uint32_t motor_current_setting[3]; // M907 X Z E
#ifndef MOTOR_CURRENT_COUNT
#define MOTOR_CURRENT_COUNT 3
#endif
uint32_t motor_current_setting[MOTOR_CURRENT_COUNT]; // M907 X Z E
//
// CNC_COORDINATE_SYSTEMS
@ -1277,10 +1280,10 @@ void MarlinSettings::postprocess() {
{
_FIELD_TEST(motor_current_setting);
#if HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
EEPROM_WRITE(stepper.motor_current_setting);
#else
const uint32_t no_current[3] = { 0 };
const uint32_t no_current[MOTOR_CURRENT_COUNT] = { 0 };
EEPROM_WRITE(no_current);
#endif
}
@ -2110,10 +2113,16 @@ void MarlinSettings::postprocess() {
// Motor Current PWM
//
{
uint32_t motor_current_setting[3];
_FIELD_TEST(motor_current_setting);
uint32_t motor_current_setting[MOTOR_CURRENT_COUNT]
#if HAS_MOTOR_CURRENT_SPI
= DIGIPOT_MOTOR_CURRENT
#endif
;
DEBUG_ECHOLNPGM("DIGIPOTS Loading");
EEPROM_READ(motor_current_setting);
#if HAS_MOTOR_CURRENT_PWM
DEBUG_ECHOLNPGM("DIGIPOTS Loaded");
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
if (!validating)
COPY(stepper.motor_current_setting, motor_current_setting);
#endif
@ -2791,9 +2800,20 @@ void MarlinSettings::reset() {
//
#if HAS_MOTOR_CURRENT_PWM
constexpr uint32_t tmp_motor_current_setting[3] = PWM_MOTOR_CURRENT;
LOOP_L_N(q, 3)
stepper.digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q]));
constexpr uint32_t tmp_motor_current_setting[MOTOR_CURRENT_COUNT] = PWM_MOTOR_CURRENT;
LOOP_L_N(q, MOTOR_CURRENT_COUNT)
stepper.set_digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q]));
#endif
//
// DIGIPOTS
//
#if HAS_MOTOR_CURRENT_SPI
static constexpr uint32_t tmp_motor_current_setting[] = DIGIPOT_MOTOR_CURRENT;
DEBUG_ECHOLNPGM("Writing Digipot");
LOOP_L_N(q, COUNT(tmp_motor_current_setting))
stepper.set_digipot_current(q, tmp_motor_current_setting[q]);
DEBUG_ECHOLNPGM("Digipot Written");
#endif
//
@ -3695,14 +3715,23 @@ void MarlinSettings::reset() {
#endif
#endif
#if HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
CONFIG_ECHO_HEADING("Stepper motor currents:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M907 X"), stepper.motor_current_setting[0]
, SP_Z_STR, stepper.motor_current_setting[1]
, SP_E_STR, stepper.motor_current_setting[2]
);
#if HAS_MOTOR_CURRENT_PWM
SERIAL_ECHOLNPAIR_P(
PSTR(" M907 X"), stepper.motor_current_setting[0]
, SP_Z_STR, stepper.motor_current_setting[1]
, SP_E_STR, stepper.motor_current_setting[2]
);
#elif HAS_MOTOR_CURRENT_SPI
SERIAL_ECHOPGM(" M907");
LOOP_L_N(q, MOTOR_CURRENT_COUNT) {
SERIAL_CHAR(' ');
SERIAL_CHAR(axis_codes[q]);
SERIAL_ECHO(stepper.motor_current_setting[q]);
}
#endif
#endif
/**

55
Marlin/src/module/stepper.cpp
View File

@ -83,10 +83,6 @@ Stepper stepper; // Singleton
#define BABYSTEPPING_EXTRA_DIR_WAIT
#if HAS_MOTOR_CURRENT_PWM
bool Stepper::initialized; // = false
#endif
#ifdef __AVR__
#include "speed_lookuptable.h"
#endif
@ -110,7 +106,7 @@ Stepper stepper; // Singleton
#include "../feature/dac/dac_dac084s085.h"
#endif
#if HAS_DIGIPOTSS
#if HAS_MOTOR_CURRENT_SPI
#include <SPI.h>
#endif
@ -142,8 +138,12 @@ Stepper stepper; // Singleton
bool Stepper::separate_multi_axis = false;
#endif
#if HAS_MOTOR_CURRENT_PWM
uint32_t Stepper::motor_current_setting[3]; // Initialized by settings.load()
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
bool Stepper::initialized; // = false
uint32_t Stepper::motor_current_setting[MOTOR_CURRENT_COUNT]; // Initialized by settings.load()
#if HAS_MOTOR_CURRENT_SPI
constexpr uint32_t Stepper::digipot_count[];
#endif
#endif
// private:
@ -2590,8 +2590,8 @@ void Stepper::init() {
set_directions();
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
TERN_(HAS_MOTOR_CURRENT_PWM, initialized = true);
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
initialized = true;
digipot_init();
#endif
}
@ -2930,10 +2930,10 @@ void Stepper::report_positions() {
* Software-controlled Stepper Motor Current
*/
#if HAS_DIGIPOTSS
#if HAS_MOTOR_CURRENT_SPI
// From Arduino DigitalPotControl example
void Stepper::digitalPotWrite(const int16_t address, const int16_t value) {
void Stepper::set_digipot_value_spi(const int16_t address, const int16_t value) {
WRITE(DIGIPOTSS_PIN, LOW); // Take the SS pin low to select the chip
SPI.transfer(address); // Send the address and value via SPI
SPI.transfer(value);
@ -2941,7 +2941,7 @@ void Stepper::report_positions() {
//delay(10);
}
#endif // HAS_DIGIPOTSS
#endif // HAS_MOTOR_CURRENT_SPI
#if HAS_MOTOR_CURRENT_PWM
@ -2958,7 +2958,7 @@ void Stepper::report_positions() {
#if ANY_PIN(MOTOR_CURRENT_PWM_E, MOTOR_CURRENT_PWM_E0, MOTOR_CURRENT_PWM_E1)
case 2:
#endif
digipot_current(i, motor_current_setting[i]);
set_digipot_current(i, motor_current_setting[i]);
default: break;
}
}
@ -2968,22 +2968,23 @@ void Stepper::report_positions() {
#if !MB(PRINTRBOARD_G2)
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
if (WITHIN(driver, 0, COUNT(motor_current_setting) - 1))
motor_current_setting[driver] = current; // update motor_current_setting
#if HAS_DIGIPOTSS
if (!initialized) return;
#if HAS_MOTOR_CURRENT_SPI
//SERIAL_ECHOLNPAIR("Digipotss current ", current);
const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
digitalPotWrite(digipot_ch[driver], current);
set_digipot_value_spi(digipot_ch[driver], current);
#elif HAS_MOTOR_CURRENT_PWM
if (!initialized) return;
if (WITHIN(driver, 0, COUNT(motor_current_setting) - 1))
motor_current_setting[driver] = current; // update motor_current_setting
#define _WRITE_CURRENT_PWM(P) analogWrite(pin_t(MOTOR_CURRENT_PWM_## P ##_PIN), 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) {
case 0:
@ -3019,17 +3020,13 @@ void Stepper::report_positions() {
void Stepper::digipot_init() {
#if HAS_DIGIPOTSS
static const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
#if HAS_MOTOR_CURRENT_SPI
SPI.begin();
SET_OUTPUT(DIGIPOTSS_PIN);
LOOP_L_N(i, COUNT(digipot_motor_current)) {
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
digipot_current(i, digipot_motor_current[i]);
}
LOOP_L_N(i, COUNT(motor_current_setting))
set_digipot_current(i, motor_current_setting[i]);
#elif HAS_MOTOR_CURRENT_PWM

22
Marlin/src/module/stepper.h
View File

@ -245,12 +245,18 @@ class Stepper {
static bool separate_multi_axis;
#endif
#if HAS_MOTOR_CURRENT_PWM
#ifndef PWM_MOTOR_CURRENT
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_PWM
#ifndef PWM_MOTOR_CURRENT
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
#endif
#define MOTOR_CURRENT_COUNT 3
#elif HAS_MOTOR_CURRENT_SPI
static constexpr uint32_t digipot_count[] = DIGIPOT_MOTOR_CURRENT;
#define MOTOR_CURRENT_COUNT COUNT(Stepper::digipot_count)
#endif
static uint32_t motor_current_setting[3];
static bool initialized;
static uint32_t motor_current_setting[MOTOR_CURRENT_COUNT]; // Initialized by settings.load()
#endif
// Last-moved extruder, as set when the last movement was fetched from planner
@ -457,9 +463,9 @@ class Stepper {
// Triggered position of an axis in steps
static int32_t triggered_position(const AxisEnum axis);
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
static void digitalPotWrite(const int16_t address, const int16_t value);
static void digipot_current(const uint8_t driver, const int16_t current);
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
static void set_digipot_value_spi(const int16_t address, const int16_t value);
static void set_digipot_current(const uint8_t driver, const int16_t current);
#endif
#if HAS_MICROSTEPS
@ -582,7 +588,7 @@ class Stepper {
static int32_t _eval_bezier_curve(const uint32_t curr_step);
#endif
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
static void digipot_init();
#endif

2
Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h
View File

@ -34,7 +34,7 @@
//
// I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT
#define HAS_MOTOR_CURRENT_DAC
// Channels available for DAC, For Rigidboard there are 4
#define DAC_STEPPER_ORDER { 0, 1, 2, 3 }

2
Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
View File

@ -143,7 +143,7 @@
#endif // NO_EXTRUDRBOARD
// Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF
#define DAC_STEPPER_CURRENT
#define HAS_MOTOR_CURRENT_DAC
// Set default drive strength percents if not already defined - X, Y, Z, E axis
#ifndef DAC_MOTOR_CURRENT_DEFAULT

4
platformio.ini
View File

@ -212,7 +212,7 @@ HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
HAS_STEALTHCHOP = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
HAS_I2C_DIGIPOT = SlowSoftI2CMaster
HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster
src_filter=+<src/feature/digipot>
HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter=+<src/module/TMC26X.cpp>
@ -278,7 +278,7 @@ CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcod
CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
DAC_STEPPER_CURRENT = src_filter=+<src/feature/dac>
HAS_MOTOR_CURRENT_DAC = src_filter=+<src/feature/dac>
DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>