From 23e45fa3c499a1c30a84deee36477f19a0ab452e Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Wed, 29 Nov 2017 21:02:29 -0600
Subject: [PATCH 1/4] Apply const to some planner vars

---
 Marlin/src/module/planner.cpp | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index ed71c7031..e5141429e 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1316,8 +1316,8 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
     // then the machine is not coasting anymore and the safe entry / exit velocities shall be used.
 
     // The junction velocity will be shared between successive segments. Limit the junction velocity to their minimum.
-    bool prev_speed_larger = previous_nominal_speed > block->nominal_speed;
-    float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed);
+    const bool prev_speed_larger = previous_nominal_speed > block->nominal_speed;
+    const float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed);
     // Pick the smaller of the nominal speeds. Higher speed shall not be achieved at the junction during coasting.
     vmax_junction = prev_speed_larger ? block->nominal_speed : previous_nominal_speed;
     // Factor to multiply the previous / current nominal velocities to get componentwise limited velocities.
@@ -1449,10 +1449,10 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c
   #else
     #define _EINDEX E_AXIS
   #endif
-  long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]),
-       nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
-       nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
-       ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
+  const long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]),
+             nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
+             nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
+             ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
   #if ENABLED(LIN_ADVANCE)
     position_float[X_AXIS] = a;
     position_float[Y_AXIS] = b;

From cf0f78336b7557f7aca81e841c1e6b74c3f1be07 Mon Sep 17 00:00:00 2001
From: Tannoo <tannoo@msn.com>
Date: Thu, 9 Nov 2017 16:39:01 -0700
Subject: [PATCH 2/4] New Feature: LED_CONTROL_MENU

---
 Marlin/Configuration_adv.h                    |  15 ++
 Marlin/src/config/default/Configuration_adv.h |  14 ++
 .../AlephObjects/TAZ4/Configuration_adv.h     |  14 ++
 .../examples/Anet/A6/Configuration_adv.h      |  14 ++
 .../examples/Anet/A8/Configuration_adv.h      |  14 ++
 .../examples/Azteeg/X5GT/Configuration_adv.h  |  14 ++
 .../examples/BQ/Hephestos/Configuration_adv.h |  14 ++
 .../BQ/Hephestos_2/Configuration_adv.h        |  14 ++
 .../examples/BQ/WITBOX/Configuration_adv.h    |  14 ++
 .../examples/Cartesio/Configuration_adv.h     |  14 ++
 .../Creality/CR-10/Configuration_adv.h        |  14 ++
 .../config/examples/Felix/Configuration_adv.h |  14 ++
 .../FolgerTech/i3-2020/Configuration_adv.h    |  14 ++
 .../Infitary/i3-M508/Configuration_adv.h      |  14 ++
 .../examples/Malyan/M150/Configuration_adv.h  |  14 ++
 .../Micromake/C1/enhanced/Configuration_adv.h |  14 ++
 .../examples/Mks/Sbase/Configuration_adv.h    |  14 ++
 .../examples/RigidBot/Configuration_adv.h     |  14 ++
 .../config/examples/SCARA/Configuration_adv.h |  14 ++
 .../examples/Sanguinololu/Configuration_adv.h |  14 ++
 .../examples/TinyBoy2/Configuration_adv.h     |  14 ++
 .../UltiMachine/Archim2/Configuration_adv.h   |  14 ++
 .../Velleman/K8200/Configuration_adv.h        |  14 ++
 .../Velleman/K8400/Configuration_adv.h        |  14 ++
 .../FLSUN/auto_calibrate/Configuration_adv.h  |  14 ++
 .../FLSUN/kossel_mini/Configuration_adv.h     |  14 ++
 .../delta/generic/Configuration_adv.h         |  14 ++
 .../delta/kossel_mini/Configuration_adv.h     |  14 ++
 .../delta/kossel_pro/Configuration_adv.h      |  14 ++
 .../delta/kossel_xl/Configuration_adv.h       |  14 ++
 .../gCreate/gMax1.5+/Configuration_adv.h      |  14 ++
 .../examples/makibox/Configuration_adv.h      |  14 ++
 .../tvrrug/Round2/Configuration_adv.h         |  14 ++
 .../config/examples/wt150/Configuration_adv.h |  14 ++
 Marlin/src/feature/leds/leds.cpp              |  71 +++++++--
 Marlin/src/feature/leds/leds.h                |   2 +
 Marlin/src/feature/leds/neopixel.cpp          |  22 ++-
 Marlin/src/feature/leds/neopixel.h            |   3 +-
 Marlin/src/lcd/language/language_en.h         |  57 +++++++-
 Marlin/src/lcd/ultralcd.cpp                   | 138 ++++++++++++++++++
 40 files changed, 752 insertions(+), 18 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index fbbb21d41..7894c7da5 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -482,6 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+
+      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+    #endif
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index fbbb21d41..b472f061a 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index aaef371f2..9e4838656 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index ff9a8b40d..665748981 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 203484653..c2bffc8a5 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index f6a9abbce..436b95ca3 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 007652f86..02de527b3 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index f5adb3718..e382c4c3b 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 007652f86..02de527b3 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 82e4ff63d..d60c395b2 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index fe5add0c6..d4b85d009 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 17719cee0..119e86e05 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index baa7a278f..726c398e4 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 21519c30b..f17dcdea7 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index c3b0b911a..4a467b94b 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index c8f092df2..58dd452df 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index caa659038..743eb91b5 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 4ff47fd90..93b450c68 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index b0756f791..3a4cf5329 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index d6da256f9..49a04bc0b 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -471,6 +471,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 22c845e35..1ff50eb0d 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index d9aef183d..ed1b1ead5 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 98959a683..2dc6e19b9 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -495,6 +495,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 3ab905163..8c788c9dd 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 4850ad7a9..217d29c44 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 8663f5e32..ef8778f44 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 8663f5e32..ef8778f44 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 8663f5e32..ef8778f44 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 46c4999cc..1cc9d1f4c 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -489,6 +489,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 66dd6700f..7cbc9791c 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -484,6 +484,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 59b861ed4..5a2ffd3e4 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 3bc38c745..8e5aa309a 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index c1e303af3..3edfa9a3e 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -482,6 +482,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index ad2f3b894..54f72fb07 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -483,6 +483,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED       255   // User defined RED value
+      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
+      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
+      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
+      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
+    #endif
+    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp
index b412bdc70..456a6442c 100644
--- a/Marlin/src/feature/leds/leds.cpp
+++ b/Marlin/src/feature/leds/leds.cpp
@@ -30,6 +30,32 @@
 
 #include "leds.h"
 
+#if ENABLED(LED_CONTROL_MENU)
+  #if ENABLED(LED_COLOR_PRESETS)
+uint8_t led_intensity_red = LED_USER_PRESET_RED,
+        led_intensity_green = LED_USER_PRESET_GREEN,
+        led_intensity_blue = LED_USER_PRESET_BLUE
+        #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+          , led_intensity_white = LED_USER_PRESET_WHITE
+        #endif
+        #if ENABLED(NEOPIXEL_LED)
+          , led_intensity = NEOPIXEL_BRIGHTNESS
+        #endif
+        ;
+  #else
+    uint8_t led_intensity_red = 255,
+            led_intensity_green = 255,
+            led_intensity_blue = 255
+            #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+              , led_intensity_white = 0
+            #endif
+            #if ENABLED(NEOPIXEL_LED)
+              , led_intensity = NEOPIXEL_BRIGHTNESS
+            #endif
+            ;
+  #endif
+#endif
+
 void set_led_color(
   const uint8_t r, const uint8_t g, const uint8_t b
     #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
@@ -42,20 +68,11 @@ void set_led_color(
 ) {
 
   #if ENABLED(NEOPIXEL_LED)
-
-    const uint32_t color = pixels.Color(r, g, b, w);
-    static uint16_t nextLed = 0;
-
-    pixels.setBrightness(p);
-    if (!isSequence)
-      set_neopixel_color(color);
-    else {
-      pixels.setPixelColor(nextLed, color);
-      pixels.show();
-      if (++nextLed >= pixels.numPixels()) nextLed = 0;
-      return;
+    if ((w == 255) || ((r == 255) && (g == 255) && (b == 255))) {
+      neopixel_set_led_color(NEO_WHITE, p);
     }
-
+    else
+      neopixel_set_led_color(r, g, b, w, p);
   #endif
 
   #if ENABLED(BLINKM)
@@ -81,6 +98,34 @@ void set_led_color(
   #if ENABLED(PCA9632)
     pca9632_set_led_color(r, g, b); // Update I2C LED driver
   #endif
+
+  #if ENABLED(LED_CONTROL_MENU)
+    if ((r + g + b
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        + w
+      #endif
+    ) >= 3) {
+      led_intensity_red = r;
+      led_intensity_green = g;
+      led_intensity_blue = b;
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        led_intensity_white = w;
+      #endif
+      #if ENABLED(NEOPIXEL_LED)
+        led_intensity = p;
+      #endif
+    }
+  #endif
+}
+
+void set_led_white(){
+  #if ENABLED(NEOPIXEL_LED)
+    neopixel_set_led_color(NEO_WHITE, pixels.getBrightness());
+  #elif (RGBW_LED)
+    set_led_color(0, 0, 0, 255);
+  #else
+    set_led_color(255, 255, 255);
+  #endif
 }
 
 #endif // HAS_COLOR_LEDS
diff --git a/Marlin/src/feature/leds/leds.h b/Marlin/src/feature/leds/leds.h
index 81c822666..169159344 100644
--- a/Marlin/src/feature/leds/leds.h
+++ b/Marlin/src/feature/leds/leds.h
@@ -65,4 +65,6 @@ void set_led_color(
     #endif
 );
 
+void set_led_white();
+
 #endif // __LEDS_H__
diff --git a/Marlin/src/feature/leds/neopixel.cpp b/Marlin/src/feature/leds/neopixel.cpp
index ae06e9b00..5e32f5277 100644
--- a/Marlin/src/feature/leds/neopixel.cpp
+++ b/Marlin/src/feature/leds/neopixel.cpp
@@ -53,7 +53,27 @@ void setup_neopixel() {
     set_neopixel_color(pixels.Color(0, 0, 255, 0));  // blue
     safe_delay(1000);
   #endif
-  set_neopixel_color(pixels.Color(NEO_WHITE));       // white
+
+  #if ENABLED(LED_USER_PRESET_STARTUP)
+    set_neopixel_color(pixels.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
+  #else
+    set_neopixel_color(pixels.Color(0, 0, 0, 0));
+  #endif
+}
+
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
+  const uint32_t color = pixels.Color(r, g, b, w);
+  pixels.setBrightness(p);
+  #if !ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+    set_neopixel_color(color);
+    return false;
+  #else
+    static uint16_t nextLed = 0;
+    pixels.setPixelColor(nextLed, color);
+    pixels.show();
+    if (++nextLed >= pixels.numPixels()) nextLed = 0;
+    return true;
+  #endif
 }
 
 #endif // NEOPIXEL_LED
diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h
index 2b937f1b8..28ea61d30 100644
--- a/Marlin/src/feature/leds/neopixel.h
+++ b/Marlin/src/feature/leds/neopixel.h
@@ -36,13 +36,14 @@
 #define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB
 
 #if NEOPIXEL_IS_RGB
-  #define NEO_WHITE 255, 255, 255
+  #define NEO_WHITE 255, 255, 255, 0
 #else
   #define NEO_WHITE 0, 0, 0, 255
 #endif
 
 void setup_neopixel();
 void set_neopixel_color(const uint32_t color);
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
 
 extern Adafruit_NeoPixel pixels;
 
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 580d1cb37..a0ffe1e49 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -174,7 +174,6 @@
 #ifndef MSG_USER_MENU
   #define MSG_USER_MENU                       _UxGT("Custom Commands")
 #endif
-
 #ifndef MSG_UBL_DOING_G29
   #define MSG_UBL_DOING_G29                   _UxGT("Doing G29")
 #endif
@@ -361,7 +360,60 @@
 #ifndef MSG_UBL_STEP_BY_STEP_MENU
   #define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("Step-By-Step UBL")
 #endif
-
+#ifndef MSG_LED_CONTROL
+  #define MSG_LED_CONTROL                     _UxGT("LED Control")
+#endif
+#ifndef MSG_LEDS_OFF
+  #define MSG_LEDS_OFF                        _UxGT("Turn Off Lights")
+#endif
+#ifndef MSG_LED_ON
+  #define MSG_LED_ON                          _UxGT("Turn on ")
+#endif
+#ifndef MSG_RED
+  #define MSG_RED                             _UxGT("Red ")
+#endif
+#ifndef MSG_ORANGE
+  #define MSG_ORANGE                          _UxGT("Orange ")
+#endif
+#ifndef MSG_YELLOW
+  #define MSG_YELLOW                          _UxGT("Yellow ")
+#endif
+#ifndef MSG_GREEN
+  #define MSG_GREEN                           _UxGT("Green ")
+#endif
+#ifndef MSG_BLUE
+  #define MSG_BLUE                            _UxGT("Blue ")
+#endif
+#ifndef MSG_PURPLE
+  #define MSG_PURPLE                          _UxGT("Purple ")
+#endif
+#ifndef MSG_WHITE
+  #define MSG_WHITE                           _UxGT("White ")
+#endif
+#ifndef MSG_CUSTOM
+  #define MSG_CUSTOM                          _UxGT("Custom ")
+#endif
+#ifndef MSG_LED_PRESET
+  #define MSG_LED_PRESET                      _UxGT("Preset ")
+#endif
+#ifndef MSG_LED_DEFAULT
+  #define MSG_LED_DEFAULT                     _UxGT("Default ")
+#endif
+#ifndef MSG_LIGHTS
+  #define MSG_LIGHTS                          _UxGT("Lights ")
+#endif
+#ifndef MSG_LED_INTENSITY
+  #define MSG_LED_INTENSITY                   _UxGT("Intensity ")
+#endif
+#ifndef MSG_LED_CUSTOM
+  #define MSG_LED_CUSTOM                      _UxGT("Custom LED")
+#endif
+#ifndef MSG_LED_SAVE
+  #define MSG_LED_SAVE                        _UxGT("Save ")
+#endif
+#ifndef MSG_LED_LOAD
+  #define MSG_LED_LOAD                        _UxGT("Load ")
+#endif
 #ifndef MSG_MOVING
   #define MSG_MOVING                          _UxGT("Moving...")
 #endif
@@ -839,7 +891,6 @@
     #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extruded")
   #endif
 #endif
-
 #ifndef MSG_INFO_MIN_TEMP
   #define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
 #endif
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 239b26229..06adb16d7 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -55,6 +55,10 @@
   #include "../feature/bedlevel/bedlevel.h"
 #endif
 
+#if ENABLED(LED_CONTROL_MENU)
+  #include "../feature/leds/leds.h"
+#endif
+
 // For i2c define BUZZ to use lcd_buzz
 #if DISABLED(LCD_USE_I2C_BUZZER)
   #include "../libs/buzzer.h"
@@ -185,6 +189,11 @@ uint16_t max_display_update_time = 0;
     void lcd_info_menu();
   #endif // LCD_INFO_MENU
 
+  #if ENABLED(LED_CONTROL_MENU)
+    void lcd_led_menu();
+    void lcd_led_custom_menu();
+  #endif
+
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     void lcd_advanced_pause_toocold_menu();
     void lcd_advanced_pause_option_menu();
@@ -1014,6 +1023,9 @@ void kill_screen(const char* lcd_msg) {
       MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
     #endif
 
+    #if ENABLED(LED_CONTROL_MENU)
+      MENU_ITEM(submenu, "LED Control", lcd_led_menu);
+    #endif
     END_MENU();
   }
 
@@ -3931,6 +3943,132 @@ void kill_screen(const char* lcd_msg) {
     }
   #endif // LCD_INFO_MENU
 
+  /**
+   *
+   * LED Menu
+   *
+   */
+
+  #if ENABLED(LED_CONTROL_MENU)
+
+    bool led_restore_color =
+      #if ENABLED(LED_USER_PRESET_STARTUP)
+        false;
+      #else
+        true;
+      #endif
+
+    extern uint8_t led_intensity_red,
+           led_intensity_green,
+           led_intensity_blue
+           #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+             , led_intensity_white
+           #endif
+           #if ENABLED(NEOPIXEL_LED)
+             , led_intensity
+           #endif
+           ;
+
+    void update_leds() {
+      if (led_restore_color) {
+        #if ENABLED(LED_COLOR_PRESETS)
+          led_intensity_red = LED_USER_PRESET_RED;
+          led_intensity_green = LED_USER_PRESET_GREEN;
+          led_intensity_blue = LED_USER_PRESET_BLUE;
+          #if ENABLED(RGBW_LED)
+            led_intensity_white = LED_USER_PRESET_WHITE;
+          #endif
+          #if ENABLED(NEOPIXEL_LED)
+            led_intensity = LED_USER_PRESET_INTENSITY;
+          #endif
+        #else
+          led_intensity_red = 255;
+          led_intensity_green = 255;
+          led_intensity_blue = 255;
+          #if ENABLED(RGBW_LED)
+            led_intensity_white = 0;
+          #endif
+          #if ENABLED(NEOPIXEL_LED)
+            led_intensity = LED_USER_PRESET_INTENSITY;
+          #endif
+        #endif
+        led_restore_color = false;
+      }
+
+      set_led_color(led_intensity_red, led_intensity_green, led_intensity_blue
+        #if ENABLED(RGBW_LED)
+          , led_intensity_white
+        #endif
+        #if ENABLED(NEOPIXEL_LED)
+          , 0, led_intensity
+        #endif
+        );
+      led_restore_color = false;
+    }
+
+    void led_restore_default() {
+      led_restore_color = true;
+      update_leds();
+    }
+
+    void set_leds_off() {
+      set_led_color(0, 0, 0
+        #if ENABLED(RGBW) || ENABLED(NEOPIXEL_LED)
+        , 0
+        #endif
+        );
+    }
+
+    void lcd_led_red()    { set_led_color(255, 0, 0); }
+    void lcd_led_orange() { set_led_color(150, 60, 0); }
+    void lcd_led_yellow() { set_led_color(255, 255, 0); }
+    void lcd_led_green()  { set_led_color(0, 255, 0); }
+    void lcd_led_blue()   { set_led_color(0, 0, 255); }
+    void lcd_led_purple() { set_led_color(255, 0, 255); }
+
+    void lcd_led_presets_menu() {
+      START_MENU();
+      MENU_BACK(MSG_LED_CONTROL);
+      MENU_ITEM(function, MSG_LED_ON MSG_RED MSG_LIGHTS, lcd_led_red);
+      MENU_ITEM(function, MSG_LED_ON MSG_ORANGE MSG_LIGHTS, lcd_led_orange);
+      MENU_ITEM(function, MSG_LED_ON MSG_YELLOW MSG_LIGHTS,lcd_led_yellow);
+      MENU_ITEM(function, MSG_LED_ON MSG_GREEN MSG_LIGHTS, lcd_led_green);
+      MENU_ITEM(function, MSG_LED_ON MSG_BLUE MSG_LIGHTS, lcd_led_blue);
+      MENU_ITEM(function, MSG_LED_ON MSG_PURPLE MSG_LIGHTS, lcd_led_purple);
+      MENU_ITEM(function, MSG_LED_ON MSG_WHITE MSG_LIGHTS, set_led_white);
+      END_MENU();
+    }
+
+    void lcd_led_custom_menu() {
+      START_MENU();
+      MENU_BACK(MSG_LED_CONTROL);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_RED MSG_LED_INTENSITY, &led_intensity_red, 0, 255, update_leds, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_GREEN MSG_LED_INTENSITY, &led_intensity_green, 0, 255, update_leds, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_BLUE MSG_LED_INTENSITY, &led_intensity_blue, 0, 255, update_leds, true);
+      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+        MENU_ITEM_EDIT_CALLBACK(int8, MSG_WHITE MSG_LED_INTENSITY, &led_intensity_white, 0, 255, update_leds, true);
+      #endif
+      #if ENABLED(NEOPIXEL_LED)
+        MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_INTENSITY, &led_intensity, 0, 255, update_leds, true);
+      #endif
+      END_MENU();
+    }
+
+    void lcd_led_menu() {
+      START_MENU();
+      MENU_BACK(MSG_MAIN);
+      MENU_ITEM(function, MSG_LIGHTS MSG_OFF, set_leds_off); // works
+      MENU_ITEM(function, MSG_LIGHTS MSG_ON, update_leds); // works
+      MENU_ITEM(function, MSG_LED_LOAD MSG_LED_DEFAULT MSG_LIGHTS, led_restore_default); // works
+      #if ENABLED(LED_COLOR_PRESETS)
+        MENU_ITEM(submenu, MSG_LED_PRESET MSG_LIGHTS, lcd_led_presets_menu);
+      #endif
+      MENU_ITEM(submenu, MSG_CUSTOM MSG_LIGHTS, lcd_led_custom_menu);
+      END_MENU();
+    }
+
+  #endif // LED_CONTROL_MENU
+
   /**
    *
    * Filament Change Feature Screens

From 8f90642eea65ab2e1f4fff8f603498c00eb57aa5 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Tue, 28 Nov 2017 01:05:51 -0600
Subject: [PATCH 3/4] LED_CONTROL_MENU config changes

---
 .travis.yml                                   |  2 +-
 Marlin/Configuration_adv.h                    | 26 ++++++++++---------
 Marlin/src/config/default/Configuration_adv.h | 25 ++++++++++--------
 .../AlephObjects/TAZ4/Configuration_adv.h     | 25 ++++++++++--------
 .../examples/Anet/A6/Configuration_adv.h      | 25 ++++++++++--------
 .../examples/Anet/A8/Configuration_adv.h      | 25 ++++++++++--------
 .../examples/Azteeg/X5GT/Configuration_adv.h  | 25 ++++++++++--------
 .../examples/BQ/Hephestos/Configuration_adv.h | 25 ++++++++++--------
 .../BQ/Hephestos_2/Configuration_adv.h        | 25 ++++++++++--------
 .../examples/BQ/WITBOX/Configuration_adv.h    | 25 ++++++++++--------
 .../examples/Cartesio/Configuration_adv.h     | 25 ++++++++++--------
 .../Creality/CR-10/Configuration_adv.h        | 25 ++++++++++--------
 .../config/examples/Felix/Configuration_adv.h | 25 ++++++++++--------
 .../FolgerTech/i3-2020/Configuration_adv.h    | 25 ++++++++++--------
 .../Infitary/i3-M508/Configuration_adv.h      | 25 ++++++++++--------
 .../examples/Malyan/M150/Configuration_adv.h  | 25 ++++++++++--------
 .../Micromake/C1/enhanced/Configuration_adv.h | 25 ++++++++++--------
 .../examples/Mks/Sbase/Configuration_adv.h    | 25 ++++++++++--------
 .../examples/RigidBot/Configuration_adv.h     | 25 ++++++++++--------
 .../config/examples/SCARA/Configuration_adv.h | 25 ++++++++++--------
 .../examples/Sanguinololu/Configuration_adv.h | 25 ++++++++++--------
 .../examples/TinyBoy2/Configuration_adv.h     | 25 ++++++++++--------
 .../UltiMachine/Archim2/Configuration_adv.h   | 25 ++++++++++--------
 .../Velleman/K8200/Configuration_adv.h        | 25 ++++++++++--------
 .../Velleman/K8400/Configuration_adv.h        | 25 ++++++++++--------
 .../FLSUN/auto_calibrate/Configuration_adv.h  | 25 ++++++++++--------
 .../FLSUN/kossel_mini/Configuration_adv.h     | 25 ++++++++++--------
 .../delta/generic/Configuration_adv.h         | 25 ++++++++++--------
 .../delta/kossel_mini/Configuration_adv.h     | 25 ++++++++++--------
 .../delta/kossel_pro/Configuration_adv.h      | 25 ++++++++++--------
 .../delta/kossel_xl/Configuration_adv.h       | 25 ++++++++++--------
 .../gCreate/gMax1.5+/Configuration_adv.h      | 25 ++++++++++--------
 .../examples/makibox/Configuration_adv.h      | 25 ++++++++++--------
 .../tvrrug/Round2/Configuration_adv.h         | 25 ++++++++++--------
 .../config/examples/wt150/Configuration_adv.h | 25 ++++++++++--------
 Marlin/src/inc/Conditionals_post.h            | 23 ++++++++++++++++
 Marlin/src/inc/MarlinConfig.h                 |  1 +
 Marlin/src/inc/SanityCheck.h                  |  4 ++-
 38 files changed, 504 insertions(+), 377 deletions(-)

diff --git a/.travis.yml b/.travis.yml
index 00d72b99b..0f0284215 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -63,7 +63,7 @@ script:
   - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
   - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED
   - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
-  - opt_enable_adv FWRETRACT MAX7219_DEBUG
+  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU
   - opt_set ABL_GRID_POINTS_X 16
   - opt_set ABL_GRID_POINTS_Y 16
   - opt_set_adv FANMUX0_PIN 53
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 7894c7da5..af44bb6c9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -482,19 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-
-      //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
-    #endif
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index b472f061a..af44bb6c9 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 9e4838656..aab17d8ff 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 665748981..c99ff058d 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index c2bffc8a5..0c256cdd5 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 436b95ca3..b3530082e 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -483,18 +483,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 02de527b3..1f75c0d68 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index e382c4c3b..749ccbdd0 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 02de527b3..1f75c0d68 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index d60c395b2..1e061e2be 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index d4b85d009..386a908d0 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 119e86e05..4944d40a5 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 726c398e4..707c2f36c 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index f17dcdea7..f5c1659b0 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 4a467b94b..91da6a562 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 58dd452df..6143c4381 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 743eb91b5..ce574a38f 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -483,18 +483,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 93b450c68..bc5558adc 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 3a4cf5329..87f44b697 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 49a04bc0b..c07caf170 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -471,18 +471,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 1ff50eb0d..fdc6d55ab 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index ed1b1ead5..4efb6c2dd 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 2dc6e19b9..b1040f389 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -495,18 +495,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 8c788c9dd..d96e2add8 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -483,18 +483,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 217d29c44..26681fe29 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -484,18 +484,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index ef8778f44..05a32b8e4 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -484,18 +484,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index ef8778f44..05a32b8e4 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -484,18 +484,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index ef8778f44..05a32b8e4 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -484,18 +484,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 1cc9d1f4c..ba46688d2 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -489,18 +489,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 7cbc9791c..1db1d39bc 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -484,18 +484,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 5a2ffd3e4..c49316910 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 8e5aa309a..1e8211740 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 3edfa9a3e..ccbebbaa8 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -482,18 +482,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 54f72fb07..056c79ca9 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -483,18 +483,21 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
-//#define LED_CONTROL_MENU                       // Uncomment to enable the LED control menu option.
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
 #if ENABLED(LED_CONTROL_MENU)
-
-  #define LED_COLOR_PRESETS                   // Uncomment to enable the preset color menu option.
-    #if ENABLED(LED_COLOR_PRESETS)
-      #define LED_USER_PRESET_RED       255   // User defined RED value
-      #define LED_USER_PRESET_GREEN     128   // User defined GREEN value
-      #define LED_USER_PRESET_BLUE        0   // User defined BLUE value
-      #define LED_USER_PRESET_WHITE     255   // User defined WHITE value
-      #define LED_USER_PRESET_INTENSITY 255   // User defined intensity
-    #endif
-    //#define LED_USER_PRESET_STARTUP         // Have the printer display the user preset color on startup
+  #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+  #if ENABLED(LED_COLOR_PRESETS)
+    #define LED_USER_PRESET_RED        255  // User defined RED value
+    #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+    #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+    #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+    #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+    //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+  #endif
 #endif // LED_CONTROL_MENU
 
 #if ENABLED(SDSUPPORT)
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 95a8b6ba9..cf128a989 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -1178,6 +1178,29 @@
   #define MAX_VFAT_ENTRIES (2)
 #endif
 
+// Set defaults for unspecified LED user colors
+#if ENABLED(LED_CONTROL_MENU)
+  #ifndef LED_USER_PRESET_RED
+    #define LED_USER_PRESET_RED       255
+  #endif
+  #ifndef LED_USER_PRESET_GREEN
+    #define LED_USER_PRESET_GREEN     255
+  #endif
+  #ifndef LED_USER_PRESET_BLUE
+    #define LED_USER_PRESET_BLUE      255
+  #endif
+  #ifndef LED_USER_PRESET_WHITE
+    #define LED_USER_PRESET_WHITE     0
+  #endif
+  #ifndef LED_USER_PRESET_BRIGHTNESS
+    #ifdef NEOPIXEL_BRIGHTNESS
+      #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
+    #else
+      #define LED_USER_PRESET_BRIGHTNESS 255
+    #endif
+  #endif
+#endif
+
 // Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768
 // because of a bug in the shared SPI implementation. (See #8122)
 #if defined(TARGET_LPC1768) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
diff --git a/Marlin/src/inc/MarlinConfig.h b/Marlin/src/inc/MarlinConfig.h
index ac47b0962..1e4a96e51 100644
--- a/Marlin/src/inc/MarlinConfig.h
+++ b/Marlin/src/inc/MarlinConfig.h
@@ -32,6 +32,7 @@
 #endif
 #include "Conditionals_post.h"
 #include "SanityCheck.h"
+#include "../HAL/HAL_SanityCheck.h"
 
 // Include all core headers
 #include "../core/enum.h"
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index f2ba984e2..ab1ccd20c 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1479,6 +1479,8 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m
   #error "BLOCK_BUFFER_SIZE must be a power of 2."
 #endif
 
-#include "../HAL/HAL_SanityCheck.h"  // get CPU specific checks
+#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
+  #error "LED_CONTROL_MENU requires an LCD controller."
+#endif
 
 #endif // _SANITYCHECK_H_

From e37dd645488ffc4377b6ec818c1e38e55b5903b7 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Tue, 28 Nov 2017 01:07:10 -0600
Subject: [PATCH 4/4] Apply LEDColor, language fixes

---
 Marlin/src/Marlin.cpp                      |   4 +-
 Marlin/src/feature/leds/blinkm.cpp         |  14 +-
 Marlin/src/feature/leds/blinkm.h           |  15 +-
 Marlin/src/feature/leds/leds.cpp           | 149 ++++++++++---------
 Marlin/src/feature/leds/leds.h             | 157 +++++++++++++++++----
 Marlin/src/feature/leds/neopixel.cpp       |   2 +
 Marlin/src/feature/leds/neopixel.h         |   2 +-
 Marlin/src/feature/leds/pca9632.cpp        |  12 +-
 Marlin/src/feature/leds/pca9632.h          |   8 +-
 Marlin/src/gcode/feature/leds/M150.cpp     |  14 +-
 Marlin/src/gcode/queue.cpp                 |   4 +-
 Marlin/src/gcode/temperature/M104_M109.cpp |  17 +--
 Marlin/src/gcode/temperature/M140_M190.cpp |  10 +-
 Marlin/src/lcd/language/language_en.h      |  71 +++++-----
 Marlin/src/lcd/ultralcd.cpp                | 130 +++++------------
 15 files changed, 323 insertions(+), 286 deletions(-)

diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index bc99eb3aa..3513fe7e7 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -775,8 +775,8 @@ void setup() {
     OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off
   #endif
 
-  #if ENABLED(NEOPIXEL_LED)
-    setup_neopixel();
+  #if HAS_COLOR_LEDS
+    leds.setup();
   #endif
 
   #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
diff --git a/Marlin/src/feature/leds/blinkm.cpp b/Marlin/src/feature/leds/blinkm.cpp
index 30a465c67..ff5bb71a9 100644
--- a/Marlin/src/feature/leds/blinkm.cpp
+++ b/Marlin/src/feature/leds/blinkm.cpp
@@ -21,8 +21,7 @@
  */
 
 /**
- * blinkm.cpp - Library for controlling a BlinkM over i2c
- * Created by Tim Koster, August 21 2013.
+ * blinkm.cpp - Control a BlinkM over i2c
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -30,17 +29,18 @@
 #if ENABLED(BLINKM)
 
 #include "blinkm.h"
+#include "leds.h"
+#include <Wire.h>
 
-void blinkm_set_led_color(const byte r, const byte g, const byte b) {
+void blinkm_set_led_color(const LEDColor &color) {
   Wire.begin();
   Wire.beginTransmission(0x09);
   Wire.write('o');                    //to disable ongoing script, only needs to be used once
   Wire.write('n');
-  Wire.write(r);
-  Wire.write(g);
-  Wire.write(b);
+  Wire.write(color.r);
+  Wire.write(color.g);
+  Wire.write(color.b);
   Wire.endTransmission();
 }
 
 #endif // BLINKM
-
diff --git a/Marlin/src/feature/leds/blinkm.h b/Marlin/src/feature/leds/blinkm.h
index d4b5b8d2e..20e84d9a9 100644
--- a/Marlin/src/feature/leds/blinkm.h
+++ b/Marlin/src/feature/leds/blinkm.h
@@ -21,16 +21,15 @@
  */
 
 /**
- * blinkm.h - Library for controlling a BlinkM over i2c
- * Created by Tim Koster, August 21 2013.
+ * blinkm.h - Control a BlinkM over i2c
  */
 
-#ifndef __BLINKM_H__
-#define __BLINKM_H__
+#ifndef _BLINKM_H_
+#define _BLINKM_H_
 
-#include <Arduino.h>
-#include <Wire.h>
+struct LEDColor;
+typedef LEDColor LEDColor;
 
-void blinkm_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b);
+void blinkm_set_led_color(const LEDColor &color);
 
-#endif // __BLINKM_H__
+#endif // _BLINKM_H_
diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp
index 456a6442c..d3175a031 100644
--- a/Marlin/src/feature/leds/leds.cpp
+++ b/Marlin/src/feature/leds/leds.cpp
@@ -21,7 +21,7 @@
  */
 
 /**
- * Marlin RGB LED general support
+ * leds.cpp - Marlin RGB LED general support
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -30,102 +30,111 @@
 
 #include "leds.h"
 
-#if ENABLED(LED_CONTROL_MENU)
-  #if ENABLED(LED_COLOR_PRESETS)
-uint8_t led_intensity_red = LED_USER_PRESET_RED,
-        led_intensity_green = LED_USER_PRESET_GREEN,
-        led_intensity_blue = LED_USER_PRESET_BLUE
-        #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-          , led_intensity_white = LED_USER_PRESET_WHITE
-        #endif
-        #if ENABLED(NEOPIXEL_LED)
-          , led_intensity = NEOPIXEL_BRIGHTNESS
-        #endif
-        ;
-  #else
-    uint8_t led_intensity_red = 255,
-            led_intensity_green = 255,
-            led_intensity_blue = 255
-            #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-              , led_intensity_white = 0
-            #endif
-            #if ENABLED(NEOPIXEL_LED)
-              , led_intensity = NEOPIXEL_BRIGHTNESS
-            #endif
-            ;
-  #endif
+#if ENABLED(BLINKM)
+  #include "blinkm.h"
 #endif
 
-void set_led_color(
-  const uint8_t r, const uint8_t g, const uint8_t b
-    #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-      , const uint8_t w // = 0
-      #if ENABLED(NEOPIXEL_LED)
-        , const uint8_t p // = NEOPIXEL_BRIGHTNESS
-        , const bool isSequence // = false
-      #endif
-    #endif
+#if ENABLED(PCA9632)
+  #include "pca9632.h"
+#endif
+
+#if ENABLED(LED_COLOR_PRESETS)
+  const LEDColor LEDLights::defaultLEDColor = MakeLEDColor(
+    LED_USER_PRESET_RED,
+    LED_USER_PRESET_GREEN,
+    LED_USER_PRESET_BLUE,
+    LED_USER_PRESET_WHITE,
+    LED_USER_PRESET_BRIGHTNESS
+  );
+#endif
+
+#if ENABLED(LED_CONTROL_MENU)
+  LEDColor LEDLights::color;
+  bool LEDLights::lights_on;
+#endif
+
+LEDLights leds;
+
+void LEDLights::setup() {
+  #if ENABLED(NEOPIXEL_LED)
+    setup_neopixel();
+  #endif
+  #if ENABLED(LED_USER_PRESET_STARTUP)
+    set_default();
+  #endif
+}
+
+void LEDLights::set_color(const LEDColor &incol
+  #if ENABLED(NEOPIXEL_LED)
+    , bool isSequence/*=false*/
+  #endif
 ) {
 
   #if ENABLED(NEOPIXEL_LED)
-    if ((w == 255) || ((r == 255) && (g == 255) && (b == 255))) {
-      neopixel_set_led_color(NEO_WHITE, p);
+
+    const uint32_t neocolor = pixels.Color(incol.r, incol.g, incol.b, incol.w);
+    static uint16_t nextLed = 0;
+
+    pixels.setBrightness(incol.i);
+    if (!isSequence)
+      set_neopixel_color(neocolor);
+    else {
+      pixels.setPixelColor(nextLed, neocolor);
+      pixels.show();
+      if (++nextLed >= pixels.numPixels()) nextLed = 0;
+      return;
     }
-    else
-      neopixel_set_led_color(r, g, b, w, p);
+
   #endif
 
   #if ENABLED(BLINKM)
-    blinkm_set_led_color(r, g, b); // Use i2c to send the RGB components to the device.
+
+    // This variant uses i2c to send the RGB components to the device.
+    blinkm_set_led_color(incol);
+
   #endif
 
   #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
-    // This variant uses 3 separate pins for the RGB components.
+
+    // This variant uses 3-4 separate pins for the RGB(W) components.
     // If the pins can do PWM then their intensity will be set.
-    WRITE(RGB_LED_R_PIN, r ? HIGH : LOW);
-    WRITE(RGB_LED_G_PIN, g ? HIGH : LOW);
-    WRITE(RGB_LED_B_PIN, b ? HIGH : LOW);
-    analogWrite(RGB_LED_R_PIN, r);
-    analogWrite(RGB_LED_G_PIN, g);
-    analogWrite(RGB_LED_B_PIN, b);
+    WRITE(RGB_LED_R_PIN, incol.r ? HIGH : LOW);
+    WRITE(RGB_LED_G_PIN, incol.g ? HIGH : LOW);
+    WRITE(RGB_LED_B_PIN, incol.b ? HIGH : LOW);
+    analogWrite(RGB_LED_R_PIN, incol.r);
+    analogWrite(RGB_LED_G_PIN, incol.g);
+    analogWrite(RGB_LED_B_PIN, incol.b);
 
     #if ENABLED(RGBW_LED)
-      WRITE(RGB_LED_W_PIN, w ? HIGH : LOW);
-      analogWrite(RGB_LED_W_PIN, w);
+      WRITE(RGB_LED_W_PIN, incol.w ? HIGH : LOW);
+      analogWrite(RGB_LED_W_PIN, incol.w);
     #endif
+
   #endif
 
   #if ENABLED(PCA9632)
-    pca9632_set_led_color(r, g, b); // Update I2C LED driver
+    // Update I2C LED driver
+    pca9632_set_led_color(incol);
   #endif
 
   #if ENABLED(LED_CONTROL_MENU)
-    if ((r + g + b
-      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-        + w
-      #endif
-    ) >= 3) {
-      led_intensity_red = r;
-      led_intensity_green = g;
-      led_intensity_blue = b;
-      #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-        led_intensity_white = w;
-      #endif
-      #if ENABLED(NEOPIXEL_LED)
-        led_intensity = p;
-      #endif
-    }
+    // Don't update the color when OFF
+    lights_on = !incol.is_off();
+    if (lights_on) color = incol;
   #endif
 }
 
-void set_led_white(){
+void LEDLights::set_white() {
+  #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(BLINKM) || ENABLED(PCA9632)
+    set_color(LEDColorWhite());
+  #endif
   #if ENABLED(NEOPIXEL_LED)
-    neopixel_set_led_color(NEO_WHITE, pixels.getBrightness());
-  #elif (RGBW_LED)
-    set_led_color(0, 0, 0, 255);
-  #else
-    set_led_color(255, 255, 255);
+    set_neopixel_color(pixels.Color(NEO_WHITE));
   #endif
 }
 
+#if ENABLED(LED_CONTROL_MENU)
+  void LEDLights::toggle() { if (lights_on) set_off(); else update(); }
+#endif
+
 #endif // HAS_COLOR_LEDS
diff --git a/Marlin/src/feature/leds/leds.h b/Marlin/src/feature/leds/leds.h
index 169159344..f5194a260 100644
--- a/Marlin/src/feature/leds/leds.h
+++ b/Marlin/src/feature/leds/leds.h
@@ -21,7 +21,7 @@
  */
 
 /**
- * Marlin general RGB LED support
+ * leds.h - Marlin general RGB LED support
  */
 
 #ifndef __LEDS_H__
@@ -30,41 +30,140 @@
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(NEOPIXEL_LED)
-  #include <Adafruit_NeoPixel.h>
   #include "neopixel.h"
 #endif
 
-#if ENABLED(BLINKM)
-  #include "blinkm.h"
-#endif
+#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED))
 
-#if ENABLED(PCA9632)
-  #include "pca9632.h"
-#endif
-
-#if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632)
-  #define LED_WHITE 255, 255, 255
-#elif ENABLED(RGBW_LED)
-  #define LED_WHITE 0, 0, 0, 255
-#endif
-
-#if ENABLED(NEOPIXEL_LED)
-  #define LED_BRIGHTNESS pixels.getBrightness()
-#else
-  #define LED_BRIGHTNESS 255
-#endif
-
-void set_led_color(
-  const uint8_t r, const uint8_t g, const uint8_t b
-    #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-      , const uint8_t w = 0
+/**
+ * LEDcolor type for use with leds.set_color
+ */
+typedef struct LEDColor {
+  uint8_t r, g, b
+    #if HAS_WHITE_LED
+      , w
       #if ENABLED(NEOPIXEL_LED)
-        , const uint8_t p = NEOPIXEL_BRIGHTNESS
-        , const bool isSequence = false
+        , i
       #endif
     #endif
-);
+  ;
+  LEDColor() : r(255), g(255), b(255)
+    #if HAS_WHITE_LED
+      , w(255)
+      #if ENABLED(NEOPIXEL_LED)
+        , i(NEOPIXEL_BRIGHTNESS)
+      #endif
+    #endif
+  {}
+  LEDColor(uint8_t r, uint8_t g, uint8_t b
+    #if HAS_WHITE_LED
+      , uint8_t w=0
+      #if ENABLED(NEOPIXEL_LED)
+        , uint8_t i=NEOPIXEL_BRIGHTNESS
+      #endif
+    #endif
+    ) : r(r), g(g), b(b)
+    #if HAS_WHITE_LED
+      , w(w)
+      #if ENABLED(NEOPIXEL_LED)
+        , i(i)
+      #endif
+    #endif
+  {}
+  LEDColor& operator=(const LEDColor &right) {
+    if (this != &right) memcpy(this, &right, sizeof(LEDColor));
+    return *this;
+  }
+  bool operator==(const LEDColor &right) {
+    if (this == &right) return true;
+    return 0 == memcmp(this, &right, sizeof(LEDColor));
+  }
+  bool operator!=(const LEDColor &right) { return !operator==(right); }
+  bool is_off() const {
+    return 3 > r + g + b
+      #if HAS_WHITE_LED
+        + w
+      #endif
+    ;
+  }
+} LEDColor;
 
-void set_led_white();
+/**
+ * Color helpers and presets
+ */
+#if HAS_WHITE_LED
+  #define LEDColorWhite() LEDColor(0, 0, 0, 255)
+  #if ENABLED(NEOPIXEL_LED)
+    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I)
+  #else
+    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W)
+  #endif
+#else
+  #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B)
+  #define LEDColorWhite() LEDColor(255, 255, 255)
+#endif
+#define LEDColorOff()     LEDColor(  0,   0,   0)
+#define LEDColorRed()     LEDColor(255,   0,   0)
+#define LEDColorOrange()  LEDColor(255,  80,   0)
+#define LEDColorYellow()  LEDColor(255, 255,   0)
+#define LEDColorGreen()   LEDColor(  0, 255,   0)
+#define LEDColorBlue()    LEDColor(  0,   0, 255)
+#define LEDColorIndigo()  LEDColor(  0, 255, 255)
+#define LEDColorViolet()  LEDColor(255,   0, 255)
+
+class LEDLights {
+public:
+  LEDLights() {} // ctor
+
+  static void setup(); // init()
+
+  static void set_color(const LEDColor &color
+    #if ENABLED(NEOPIXEL_LED)
+      , bool isSequence=false
+    #endif
+  );
+
+  FORCE_INLINE void set_color(uint8_t r, uint8_t g, uint8_t b
+    #if HAS_WHITE_LED
+      , uint8_t w=0
+      #if ENABLED(NEOPIXEL_LED)
+        , uint8_t i=NEOPIXEL_BRIGHTNESS
+      #endif
+    #endif
+    #if ENABLED(NEOPIXEL_LED)
+      , bool isSequence=false
+    #endif
+  ) {
+    set_color(MakeLEDColor(r, g, b, w, i)
+      #if ENABLED(NEOPIXEL_LED)
+        , isSequence
+      #endif
+    );
+  }
+
+  static void set_white();
+  FORCE_INLINE static void set_off()   { set_color(LEDColorOff()); }
+  FORCE_INLINE static void set_green() { set_color(LEDColorGreen()); }
+
+  #if ENABLED(LED_COLOR_PRESETS)
+    static const LEDColor defaultLEDColor;
+    FORCE_INLINE static void set_default()  { set_color(defaultLEDColor); }
+    FORCE_INLINE static void set_red()      { set_color(LEDColorRed()); }
+    FORCE_INLINE static void set_orange()   { set_color(LEDColorOrange()); }
+    FORCE_INLINE static void set_yellow()   { set_color(LEDColorYellow()); }
+    FORCE_INLINE static void set_blue()     { set_color(LEDColorBlue()); }
+    FORCE_INLINE static void set_indigo()   { set_color(LEDColorIndigo()); }
+    FORCE_INLINE static void set_violet()   { set_color(LEDColorViolet()); }
+  #endif
+
+  #if ENABLED(LED_CONTROL_MENU)
+    static LEDColor color; // last non-off color
+    static bool lights_on; // the last set color was "on"
+    static void toggle();  // swap "off" with color
+    FORCE_INLINE static void update() { set_color(color); }
+  #endif
+};
+
+extern LEDLights leds;
 
 #endif // __LEDS_H__
diff --git a/Marlin/src/feature/leds/neopixel.cpp b/Marlin/src/feature/leds/neopixel.cpp
index 5e32f5277..d3e292d70 100644
--- a/Marlin/src/feature/leds/neopixel.cpp
+++ b/Marlin/src/feature/leds/neopixel.cpp
@@ -61,6 +61,7 @@ void setup_neopixel() {
   #endif
 }
 
+#if 0
 bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
   const uint32_t color = pixels.Color(r, g, b, w);
   pixels.setBrightness(p);
@@ -75,5 +76,6 @@ bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, c
     return true;
   #endif
 }
+#endif
 
 #endif // NEOPIXEL_LED
diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h
index 28ea61d30..9f24b0287 100644
--- a/Marlin/src/feature/leds/neopixel.h
+++ b/Marlin/src/feature/leds/neopixel.h
@@ -43,7 +43,7 @@
 
 void setup_neopixel();
 void set_neopixel_color(const uint32_t color);
-bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
+//bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
 
 extern Adafruit_NeoPixel pixels;
 
diff --git a/Marlin/src/feature/leds/pca9632.cpp b/Marlin/src/feature/leds/pca9632.cpp
index e7bc46cb2..a95a48190 100644
--- a/Marlin/src/feature/leds/pca9632.cpp
+++ b/Marlin/src/feature/leds/pca9632.cpp
@@ -30,6 +30,8 @@
 #if ENABLED(PCA9632)
 
 #include "pca9632.h"
+#include "leds.h"
+#include <Wire.h>
 
 #define PCA9632_MODE1_VALUE   0b00000001 //(ALLCALL)
 #define PCA9632_MODE2_VALUE   0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM)
@@ -97,7 +99,7 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const
   }
 #endif
 
-void pca9632_set_led_color(const byte r, const byte g, const byte b) {
+void pca9632_set_led_color(const LEDColor &color) {
   if (!PCA_init) {
     PCA_init = 1;
     Wire.begin();
@@ -105,11 +107,11 @@ void pca9632_set_led_color(const byte r, const byte g, const byte b) {
     PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE);
   }
 
-  const byte LEDOUT = (r ? LED_PWM << PCA9632_RED : 0)
-                    | (g ? LED_PWM << PCA9632_GRN : 0)
-                    | (b ? LED_PWM << PCA9632_BLU : 0);
+  const byte LEDOUT = (color.r ? LED_PWM << PCA9632_RED : 0)
+                    | (color.g ? LED_PWM << PCA9632_GRN : 0)
+                    | (color.b ? LED_PWM << PCA9632_BLU : 0);
 
-  PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, r, g, b);
+  PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b);
   PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT);
 }
 
diff --git a/Marlin/src/feature/leds/pca9632.h b/Marlin/src/feature/leds/pca9632.h
index 0a8b48d3c..4d98267be 100644
--- a/Marlin/src/feature/leds/pca9632.h
+++ b/Marlin/src/feature/leds/pca9632.h
@@ -20,7 +20,7 @@
  *
  */
 
-/*
+/**
  * Driver for the Philips PCA9632 LED driver.
  * Written by Robert Mendon Feb 2017.
  */
@@ -28,9 +28,9 @@
 #ifndef __PCA9632_H__
 #define __PCA9632_H__
 
-#include <Arduino.h>
-#include <Wire.h>
+struct LEDColor;
+typedef LEDColor LEDColor;
 
-void pca9632_set_led_color(const byte r, const byte g, const byte b);
+void pca9632_set_led_color(const LEDColor &color);
 
 #endif // __PCA9632_H__
diff --git a/Marlin/src/gcode/feature/leds/M150.cpp b/Marlin/src/gcode/feature/leds/M150.cpp
index f5ea2113f..7eb8eb70d 100644
--- a/Marlin/src/gcode/feature/leds/M150.cpp
+++ b/Marlin/src/gcode/feature/leds/M150.cpp
@@ -45,17 +45,13 @@
  *   M150 P          ; Set LED full brightness
  */
 void GcodeSuite::M150() {
-  set_led_color(
+  leds.set_color(MakeLEDColor(
     parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
     parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
-    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0
-    #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-      , parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0
-      #if ENABLED(NEOPIXEL_LED)
-        , parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness()
-      #endif
-    #endif
-  );
+    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
+    parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
+    parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness()
+  ));
 }
 
 #endif // HAS_COLOR_LEDS
diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp
index 54614bc25..9f404f947 100644
--- a/Marlin/src/gcode/queue.cpp
+++ b/Marlin/src/gcode/queue.cpp
@@ -370,13 +370,13 @@ inline void get_serial_commands() {
             SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
             #if ENABLED(PRINTER_EVENT_LEDS)
               LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS);
-              set_led_color(0, 255, 0); // Green
+              leds.set_green();
               #if HAS_RESUME_CONTINUE
                 enqueue_and_echo_commands_P(PSTR("M0")); // end of the queue!
               #else
                 safe_delay(1000);
               #endif
-              set_led_color(0, 0, 0);   // OFF
+              leds.set_off();
             #endif
             card.checkautostart(true);
           }
diff --git a/Marlin/src/gcode/temperature/M104_M109.cpp b/Marlin/src/gcode/temperature/M104_M109.cpp
index afc7cda7a..9dfaacb56 100644
--- a/Marlin/src/gcode/temperature/M104_M109.cpp
+++ b/Marlin/src/gcode/temperature/M104_M109.cpp
@@ -190,12 +190,10 @@ void GcodeSuite::M109() {
         const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0);
         if (blue != old_blue) {
           old_blue = blue;
-          set_led_color(255, 0, blue
-            #if ENABLED(NEOPIXEL_LED)
-              , 0, pixels.getBrightness()
-              #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
-                , true
-              #endif
+          leds.set_color(
+            MakeLEDColor(255, 0, blue, 0, pixels.getBrightness())
+            #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+              , true
             #endif
           );
         }
@@ -233,12 +231,7 @@ void GcodeSuite::M109() {
   if (wait_for_heatup) {
     LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
     #if ENABLED(PRINTER_EVENT_LEDS)
-      #if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) || ENABLED(RGBW_LED)
-        set_led_color(LED_WHITE);
-      #endif
-      #if ENABLED(NEOPIXEL_LED)
-        set_neopixel_color(pixels.Color(NEO_WHITE));
-      #endif
+      leds.set_white();
     #endif
   }
 
diff --git a/Marlin/src/gcode/temperature/M140_M190.cpp b/Marlin/src/gcode/temperature/M140_M190.cpp
index b72f3b7a9..009e3629a 100644
--- a/Marlin/src/gcode/temperature/M140_M190.cpp
+++ b/Marlin/src/gcode/temperature/M140_M190.cpp
@@ -132,12 +132,10 @@ void GcodeSuite::M190() {
         const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255);
         if (red != old_red) {
           old_red = red;
-          set_led_color(red, 0, 255
-            #if ENABLED(NEOPIXEL_LED)
-              , 0, pixels.getBrightness()
-              #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
-                , true
-              #endif
+          leds.set_color(
+            MakeLEDColor(red, 0, 255, 0, pixels.getBrightness())
+            #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+              , true
             #endif
           );
         }
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index a0ffe1e49..f27a3568e 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -360,60 +360,65 @@
 #ifndef MSG_UBL_STEP_BY_STEP_MENU
   #define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("Step-By-Step UBL")
 #endif
+
 #ifndef MSG_LED_CONTROL
   #define MSG_LED_CONTROL                     _UxGT("LED Control")
 #endif
+#ifndef MSG_LEDS_ON
+  #define MSG_LEDS_ON                         _UxGT("Lights On")
+#endif
 #ifndef MSG_LEDS_OFF
-  #define MSG_LEDS_OFF                        _UxGT("Turn Off Lights")
+  #define MSG_LEDS_OFF                        _UxGT("Lights Off")
 #endif
-#ifndef MSG_LED_ON
-  #define MSG_LED_ON                          _UxGT("Turn on ")
+#ifndef MSG_LED_PRESETS
+  #define MSG_LED_PRESETS                     _UxGT("Light Presets")
 #endif
-#ifndef MSG_RED
-  #define MSG_RED                             _UxGT("Red ")
+#ifndef MSG_SET_LEDS_RED
+  #define MSG_SET_LEDS_RED                    _UxGT("Red")
 #endif
-#ifndef MSG_ORANGE
-  #define MSG_ORANGE                          _UxGT("Orange ")
+#ifndef MSG_SET_LEDS_ORANGE
+  #define MSG_SET_LEDS_ORANGE                 _UxGT("Orange")
 #endif
-#ifndef MSG_YELLOW
-  #define MSG_YELLOW                          _UxGT("Yellow ")
+#ifndef MSG_SET_LEDS_YELLOW
+  #define MSG_SET_LEDS_YELLOW                 _UxGT("Yellow")
 #endif
-#ifndef MSG_GREEN
-  #define MSG_GREEN                           _UxGT("Green ")
+#ifndef MSG_SET_LEDS_GREEN
+  #define MSG_SET_LEDS_GREEN                  _UxGT("Green")
 #endif
-#ifndef MSG_BLUE
-  #define MSG_BLUE                            _UxGT("Blue ")
+#ifndef MSG_SET_LEDS_BLUE
+  #define MSG_SET_LEDS_BLUE                   _UxGT("Blue")
 #endif
-#ifndef MSG_PURPLE
-  #define MSG_PURPLE                          _UxGT("Purple ")
+#ifndef MSG_SET_LEDS_INDIGO
+  #define MSG_SET_LEDS_INDIGO                 _UxGT("Indigo")
 #endif
-#ifndef MSG_WHITE
-  #define MSG_WHITE                           _UxGT("White ")
+#ifndef MSG_SET_LEDS_VIOLET
+  #define MSG_SET_LEDS_VIOLET                 _UxGT("Violet")
 #endif
-#ifndef MSG_CUSTOM
-  #define MSG_CUSTOM                          _UxGT("Custom ")
+#ifndef MSG_SET_LEDS_WHITE
+  #define MSG_SET_LEDS_WHITE                  _UxGT("White")
 #endif
-#ifndef MSG_LED_PRESET
-  #define MSG_LED_PRESET                      _UxGT("Preset ")
+#ifndef MSG_SET_LEDS_DEFAULT
+  #define MSG_SET_LEDS_DEFAULT                _UxGT("Default")
 #endif
-#ifndef MSG_LED_DEFAULT
-  #define MSG_LED_DEFAULT                     _UxGT("Default ")
+#ifndef MSG_CUSTOM_LEDS
+  #define MSG_CUSTOM_LEDS                     _UxGT("Custom Lights")
 #endif
-#ifndef MSG_LIGHTS
-  #define MSG_LIGHTS                          _UxGT("Lights ")
+#ifndef MSG_INTENSITY_R
+  #define MSG_INTENSITY_R                     _UxGT("Red Intensity")
 #endif
-#ifndef MSG_LED_INTENSITY
-  #define MSG_LED_INTENSITY                   _UxGT("Intensity ")
+#ifndef MSG_INTENSITY_G
+  #define MSG_INTENSITY_G                     _UxGT("Green Intensity")
 #endif
-#ifndef MSG_LED_CUSTOM
-  #define MSG_LED_CUSTOM                      _UxGT("Custom LED")
+#ifndef MSG_INTENSITY_B
+  #define MSG_INTENSITY_B                     _UxGT("Blue Intensity")
 #endif
-#ifndef MSG_LED_SAVE
-  #define MSG_LED_SAVE                        _UxGT("Save ")
+#ifndef MSG_INTENSITY_W
+  #define MSG_INTENSITY_W                     _UxGT("White Intensity")
 #endif
-#ifndef MSG_LED_LOAD
-  #define MSG_LED_LOAD                        _UxGT("Load ")
+#ifndef MSG_LED_BRIGHTNESS
+  #define MSG_LED_BRIGHTNESS                  _UxGT("Brightness")
 #endif
+
 #ifndef MSG_MOVING
   #define MSG_MOVING                          _UxGT("Moving...")
 #endif
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 06adb16d7..1b345d6b8 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -191,7 +191,6 @@ uint16_t max_display_update_time = 0;
 
   #if ENABLED(LED_CONTROL_MENU)
     void lcd_led_menu();
-    void lcd_led_custom_menu();
   #endif
 
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
@@ -1024,8 +1023,9 @@ void kill_screen(const char* lcd_msg) {
     #endif
 
     #if ENABLED(LED_CONTROL_MENU)
-      MENU_ITEM(submenu, "LED Control", lcd_led_menu);
+      MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu);
     #endif
+
     END_MENU();
   }
 
@@ -3951,105 +3951,37 @@ void kill_screen(const char* lcd_msg) {
 
   #if ENABLED(LED_CONTROL_MENU)
 
-    bool led_restore_color =
-      #if ENABLED(LED_USER_PRESET_STARTUP)
-        false;
-      #else
-        true;
-      #endif
+    #if ENABLED(LED_COLOR_PRESETS)
 
-    extern uint8_t led_intensity_red,
-           led_intensity_green,
-           led_intensity_blue
-           #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-             , led_intensity_white
-           #endif
-           #if ENABLED(NEOPIXEL_LED)
-             , led_intensity
-           #endif
-           ;
-
-    void update_leds() {
-      if (led_restore_color) {
-        #if ENABLED(LED_COLOR_PRESETS)
-          led_intensity_red = LED_USER_PRESET_RED;
-          led_intensity_green = LED_USER_PRESET_GREEN;
-          led_intensity_blue = LED_USER_PRESET_BLUE;
-          #if ENABLED(RGBW_LED)
-            led_intensity_white = LED_USER_PRESET_WHITE;
-          #endif
-          #if ENABLED(NEOPIXEL_LED)
-            led_intensity = LED_USER_PRESET_INTENSITY;
-          #endif
-        #else
-          led_intensity_red = 255;
-          led_intensity_green = 255;
-          led_intensity_blue = 255;
-          #if ENABLED(RGBW_LED)
-            led_intensity_white = 0;
-          #endif
-          #if ENABLED(NEOPIXEL_LED)
-            led_intensity = LED_USER_PRESET_INTENSITY;
-          #endif
+      void lcd_led_presets_menu() {
+        START_MENU();
+        #if LCD_HEIGHT > 2
+          STATIC_ITEM(MSG_LED_PRESETS, true, true);
         #endif
-        led_restore_color = false;
+        MENU_BACK(MSG_LED_CONTROL);
+        MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white);
+        MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red);
+        MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange);
+        MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow);
+        MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green);
+        MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue);
+        MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo);
+        MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet);
+        END_MENU();
       }
-
-      set_led_color(led_intensity_red, led_intensity_green, led_intensity_blue
-        #if ENABLED(RGBW_LED)
-          , led_intensity_white
-        #endif
-        #if ENABLED(NEOPIXEL_LED)
-          , 0, led_intensity
-        #endif
-        );
-      led_restore_color = false;
-    }
-
-    void led_restore_default() {
-      led_restore_color = true;
-      update_leds();
-    }
-
-    void set_leds_off() {
-      set_led_color(0, 0, 0
-        #if ENABLED(RGBW) || ENABLED(NEOPIXEL_LED)
-        , 0
-        #endif
-        );
-    }
-
-    void lcd_led_red()    { set_led_color(255, 0, 0); }
-    void lcd_led_orange() { set_led_color(150, 60, 0); }
-    void lcd_led_yellow() { set_led_color(255, 255, 0); }
-    void lcd_led_green()  { set_led_color(0, 255, 0); }
-    void lcd_led_blue()   { set_led_color(0, 0, 255); }
-    void lcd_led_purple() { set_led_color(255, 0, 255); }
-
-    void lcd_led_presets_menu() {
-      START_MENU();
-      MENU_BACK(MSG_LED_CONTROL);
-      MENU_ITEM(function, MSG_LED_ON MSG_RED MSG_LIGHTS, lcd_led_red);
-      MENU_ITEM(function, MSG_LED_ON MSG_ORANGE MSG_LIGHTS, lcd_led_orange);
-      MENU_ITEM(function, MSG_LED_ON MSG_YELLOW MSG_LIGHTS,lcd_led_yellow);
-      MENU_ITEM(function, MSG_LED_ON MSG_GREEN MSG_LIGHTS, lcd_led_green);
-      MENU_ITEM(function, MSG_LED_ON MSG_BLUE MSG_LIGHTS, lcd_led_blue);
-      MENU_ITEM(function, MSG_LED_ON MSG_PURPLE MSG_LIGHTS, lcd_led_purple);
-      MENU_ITEM(function, MSG_LED_ON MSG_WHITE MSG_LIGHTS, set_led_white);
-      END_MENU();
-    }
+    #endif // LED_COLOR_PRESETS
 
     void lcd_led_custom_menu() {
       START_MENU();
       MENU_BACK(MSG_LED_CONTROL);
-      MENU_ITEM_EDIT_CALLBACK(int8, MSG_RED MSG_LED_INTENSITY, &led_intensity_red, 0, 255, update_leds, true);
-      MENU_ITEM_EDIT_CALLBACK(int8, MSG_GREEN MSG_LED_INTENSITY, &led_intensity_green, 0, 255, update_leds, true);
-      MENU_ITEM_EDIT_CALLBACK(int8, MSG_BLUE MSG_LED_INTENSITY, &led_intensity_blue, 0, 255, update_leds, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true);
+      MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true);
       #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
-        MENU_ITEM_EDIT_CALLBACK(int8, MSG_WHITE MSG_LED_INTENSITY, &led_intensity_white, 0, 255, update_leds, true);
-      #endif
-      #if ENABLED(NEOPIXEL_LED)
-        MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_INTENSITY, &led_intensity, 0, 255, update_leds, true);
+        MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true);
+        #if ENABLED(NEOPIXEL_LED)
+          MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true);
+        #endif
       #endif
       END_MENU();
     }
@@ -4057,13 +3989,15 @@ void kill_screen(const char* lcd_msg) {
     void lcd_led_menu() {
       START_MENU();
       MENU_BACK(MSG_MAIN);
-      MENU_ITEM(function, MSG_LIGHTS MSG_OFF, set_leds_off); // works
-      MENU_ITEM(function, MSG_LIGHTS MSG_ON, update_leds); // works
-      MENU_ITEM(function, MSG_LED_LOAD MSG_LED_DEFAULT MSG_LIGHTS, led_restore_default); // works
+      if (leds.lights_on)
+        MENU_ITEM(function, MSG_LEDS_OFF, leds.toggle);
+      else
+        MENU_ITEM(function, MSG_LEDS_ON, leds.toggle);
+      MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default);
       #if ENABLED(LED_COLOR_PRESETS)
-        MENU_ITEM(submenu, MSG_LED_PRESET MSG_LIGHTS, lcd_led_presets_menu);
+        MENU_ITEM(submenu, MSG_LED_PRESETS, lcd_led_presets_menu);
       #endif
-      MENU_ITEM(submenu, MSG_CUSTOM MSG_LIGHTS, lcd_led_custom_menu);
+      MENU_ITEM(submenu, MSG_CUSTOM_LEDS, lcd_led_custom_menu);
       END_MENU();
     }