diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index c3ba3f7e2..d6f31658c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2471,10 +2471,26 @@ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V) * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 * - * Define you own with + * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V + #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + //#define CHOPPER_TIMING_X CHOPPER_DEFAULT_12V // For X Axes (override below) + //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_Y CHOPPER_DEFAULT_12V // For Y Axes (override below) + //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_Z CHOPPER_DEFAULT_12V // For Z Axes (override below) + //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E CHOPPER_DEFAULT_12V // For Extruders (override below) + //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V + //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V /** * Monitor Trinamic drivers diff --git a/Marlin/src/module/stepper/trinamic.cpp b/Marlin/src/module/stepper/trinamic.cpp index d5a861d71..ad11046f6 100644 --- a/Marlin/src/module/stepper/trinamic.cpp +++ b/Marlin/src/module/stepper/trinamic.cpp @@ -36,7 +36,7 @@ #include enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; -#define TMC_INIT(ST, STEALTH_INDEX) tmc_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, stealthchop_by_axis[STEALTH_INDEX]) +#define TMC_INIT(ST, STEALTH_INDEX) tmc_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, stealthchop_by_axis[STEALTH_INDEX], chopper_timing_##ST) // IC = TMC model number // ST = Stepper object letter @@ -131,15 +131,15 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC2130) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { st.begin(); CHOPCONF_t chopconf{0}; - chopconf.tbl = 1; - chopconf.toff = chopper_timing.toff; + chopconf.tbl = 0b01; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); @@ -166,15 +166,15 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC2160) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { st.begin(); CHOPCONF_t chopconf{0}; - chopconf.tbl = 1; - chopconf.toff = chopper_timing.toff; + chopconf.tbl = 0b01; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); @@ -484,7 +484,7 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC2208) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { TMC2208_n::GCONF_t gconf{0}; gconf.pdn_disable = true; // Use UART gconf.mstep_reg_select = true; // Select microsteps with UART @@ -495,10 +495,10 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; TMC2208_n::CHOPCONF_t chopconf{0}; chopconf.tbl = 0b01; // blank_time = 24 - chopconf.toff = chopper_timing.toff; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); @@ -526,7 +526,7 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC2209) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { TMC2208_n::GCONF_t gconf{0}; gconf.pdn_disable = true; // Use UART gconf.mstep_reg_select = true; // Select microsteps with UART @@ -537,10 +537,10 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; TMC2208_n::CHOPCONF_t chopconf{0}; chopconf.tbl = 0b01; // blank_time = 24 - chopconf.toff = chopper_timing.toff; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); @@ -568,14 +568,14 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC2660) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t, const bool) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t, const bool, const chopper_timing_t &chop_init) { st.begin(); TMC2660_n::CHOPCONF_t chopconf{0}; - chopconf.tbl = 1; - chopconf.toff = chopper_timing.toff; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.tbl = 0b01; + chopconf.toff = chop_init.toff; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; st.CHOPCONF(chopconf.sr); st.sdoff(0); @@ -590,15 +590,15 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC5130) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { st.begin(); CHOPCONF_t chopconf{0}; - chopconf.tbl = 1; - chopconf.toff = chopper_timing.toff; + chopconf.tbl = 0b01; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); @@ -625,15 +625,15 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; #if HAS_DRIVER(TMC5160) template - void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) { + void tmc_init(TMCMarlin &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth, const chopper_timing_t &chop_init) { st.begin(); CHOPCONF_t chopconf{0}; - chopconf.tbl = 1; - chopconf.toff = chopper_timing.toff; + chopconf.tbl = 0b01; + chopconf.toff = chop_init.toff; chopconf.intpol = INTERPOLATE; - chopconf.hend = chopper_timing.hend + 3; - chopconf.hstrt = chopper_timing.hstrt - 1; + chopconf.hend = chop_init.hend + 3; + chopconf.hstrt = chop_init.hstrt - 1; TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true); st.CHOPCONF(chopconf.sr); diff --git a/Marlin/src/module/stepper/trinamic.h b/Marlin/src/module/stepper/trinamic.h index 9cc3404cd..7ae2a276d 100644 --- a/Marlin/src/module/stepper/trinamic.h +++ b/Marlin/src/module/stepper/trinamic.h @@ -76,7 +76,18 @@ typedef struct { uint8_t hstrt; } chopper_timing_t; -static constexpr chopper_timing_t chopper_timing = CHOPPER_TIMING; +#ifndef CHOPPER_TIMING_X + #define CHOPPER_TIMING_X CHOPPER_TIMING +#endif +#ifndef CHOPPER_TIMING_Y + #define CHOPPER_TIMING_Y CHOPPER_TIMING +#endif +#ifndef CHOPPER_TIMING_Z + #define CHOPPER_TIMING_Z CHOPPER_TIMING +#endif +#ifndef CHOPPER_TIMING_E + #define CHOPPER_TIMING_E CHOPPER_TIMING +#endif #if HAS_TMC220x void tmc_serial_begin(); @@ -90,9 +101,10 @@ void reset_trinamic_drivers(); // X Stepper #if AXIS_IS_TMC(X) extern TMC_CLASS(X, X) stepperX; + static constexpr chopper_timing_t chopper_timing_X = CHOPPER_TIMING_X; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define X_ENABLE_INIT() NOOP - #define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0) + #define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing_X.toff : 0) #define X_ENABLE_READ() stepperX.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(X) @@ -103,9 +115,10 @@ void reset_trinamic_drivers(); // Y Stepper #if AXIS_IS_TMC(Y) extern TMC_CLASS(Y, Y) stepperY; + static constexpr chopper_timing_t chopper_timing_Y = CHOPPER_TIMING_Y; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define Y_ENABLE_INIT() NOOP - #define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0) + #define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing_Y.toff : 0) #define Y_ENABLE_READ() stepperY.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Y) @@ -116,9 +129,10 @@ void reset_trinamic_drivers(); // Z Stepper #if AXIS_IS_TMC(Z) extern TMC_CLASS(Z, Z) stepperZ; + static constexpr chopper_timing_t chopper_timing_Z = CHOPPER_TIMING_Z; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define Z_ENABLE_INIT() NOOP - #define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) + #define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing_Z.toff : 0) #define Z_ENABLE_READ() stepperZ.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Z) @@ -129,9 +143,13 @@ void reset_trinamic_drivers(); // X2 Stepper #if HAS_X2_ENABLE && AXIS_IS_TMC(X2) extern TMC_CLASS(X2, X) stepperX2; + #ifndef CHOPPER_TIMING_X2 + #define CHOPPER_TIMING_X2 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_X2 = CHOPPER_TIMING_X2; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define X2_ENABLE_INIT() NOOP - #define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0) + #define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing_X2.toff : 0) #define X2_ENABLE_READ() stepperX2.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(X2) @@ -142,9 +160,13 @@ void reset_trinamic_drivers(); // Y2 Stepper #if HAS_Y2_ENABLE && AXIS_IS_TMC(Y2) extern TMC_CLASS(Y2, Y) stepperY2; + #ifndef CHOPPER_TIMING_Y2 + #define CHOPPER_TIMING_Y2 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_Y2 = CHOPPER_TIMING_Y2; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define Y2_ENABLE_INIT() NOOP - #define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0) + #define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing_Y2.toff : 0) #define Y2_ENABLE_READ() stepperY2.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Y2) @@ -155,9 +177,13 @@ void reset_trinamic_drivers(); // Z2 Stepper #if HAS_Z2_ENABLE && AXIS_IS_TMC(Z2) extern TMC_CLASS(Z2, Z) stepperZ2; + #ifndef CHOPPER_TIMING_Z2 + #define CHOPPER_TIMING_Z2 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_Z2 = CHOPPER_TIMING_Z2; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2) #define Z2_ENABLE_INIT() NOOP - #define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) + #define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing_Z2.toff : 0) #define Z2_ENABLE_READ() stepperZ2.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Z2) @@ -168,9 +194,13 @@ void reset_trinamic_drivers(); // Z3 Stepper #if HAS_Z3_ENABLE && AXIS_IS_TMC(Z3) extern TMC_CLASS(Z3, Z) stepperZ3; + #ifndef CHOPPER_TIMING_Z3 + #define CHOPPER_TIMING_Z3 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_Z3 = CHOPPER_TIMING_Z3; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define Z3_ENABLE_INIT() NOOP - #define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) + #define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing_Z3.toff : 0) #define Z3_ENABLE_READ() stepperZ3.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Z3) @@ -181,9 +211,13 @@ void reset_trinamic_drivers(); // Z4 Stepper #if HAS_Z4_ENABLE && AXIS_IS_TMC(Z4) extern TMC_CLASS(Z4, Z) stepperZ4; + #ifndef CHOPPER_TIMING_Z4 + #define CHOPPER_TIMING_Z4 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_Z4 = CHOPPER_TIMING_Z4; #if ENABLED(SOFTWARE_DRIVER_ENABLE) #define Z4_ENABLE_INIT() NOOP - #define Z4_ENABLE_WRITE(STATE) stepperZ4.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) + #define Z4_ENABLE_WRITE(STATE) stepperZ4.toff((STATE)==Z_ENABLE_ON ? chopper_timing_Z4.toff : 0) #define Z4_ENABLE_READ() stepperZ4.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(Z4) @@ -194,9 +228,13 @@ void reset_trinamic_drivers(); // E0 Stepper #if AXIS_IS_TMC(E0) extern TMC_CLASS_E(0) stepperE0; + #ifndef CHOPPER_TIMING_E0 + #define CHOPPER_TIMING_E0 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E0 = CHOPPER_TIMING_E0; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0) #define E0_ENABLE_INIT() NOOP - #define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing_E0.toff : 0) #define E0_ENABLE_READ() stepperE0.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E0) @@ -207,9 +245,13 @@ void reset_trinamic_drivers(); // E1 Stepper #if AXIS_IS_TMC(E1) extern TMC_CLASS_E(1) stepperE1; + #ifndef CHOPPER_TIMING_E1 + #define CHOPPER_TIMING_E1 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E1 = CHOPPER_TIMING_E1; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1) #define E1_ENABLE_INIT() NOOP - #define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing_E1.toff : 0) #define E1_ENABLE_READ() stepperE1.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E1) @@ -220,9 +262,13 @@ void reset_trinamic_drivers(); // E2 Stepper #if AXIS_IS_TMC(E2) extern TMC_CLASS_E(2) stepperE2; + #ifndef CHOPPER_TIMING_E2 + #define CHOPPER_TIMING_E2 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E2 = CHOPPER_TIMING_E2; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2) #define E2_ENABLE_INIT() NOOP - #define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing_E2.toff : 0) #define E2_ENABLE_READ() stepperE2.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E2) @@ -233,9 +279,13 @@ void reset_trinamic_drivers(); // E3 Stepper #if AXIS_IS_TMC(E3) extern TMC_CLASS_E(3) stepperE3; + #ifndef CHOPPER_TIMING_E3 + #define CHOPPER_TIMING_E3 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E3 = CHOPPER_TIMING_E3; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3) #define E3_ENABLE_INIT() NOOP - #define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing_E3.toff : 0) #define E3_ENABLE_READ() stepperE3.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E3) @@ -246,9 +296,13 @@ void reset_trinamic_drivers(); // E4 Stepper #if AXIS_IS_TMC(E4) extern TMC_CLASS_E(4) stepperE4; + #ifndef CHOPPER_TIMING_E4 + #define CHOPPER_TIMING_E4 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E4 = CHOPPER_TIMING_E4; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4) #define E4_ENABLE_INIT() NOOP - #define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing_E4.toff : 0) #define E4_ENABLE_READ() stepperE4.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E4) @@ -259,9 +313,13 @@ void reset_trinamic_drivers(); // E5 Stepper #if AXIS_IS_TMC(E5) extern TMC_CLASS_E(5) stepperE5; + #ifndef CHOPPER_TIMING_E5 + #define CHOPPER_TIMING_E5 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E5 = CHOPPER_TIMING_E5; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5) #define E5_ENABLE_INIT() NOOP - #define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing_E5.toff : 0) #define E5_ENABLE_READ() stepperE5.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E5) @@ -272,9 +330,13 @@ void reset_trinamic_drivers(); // E6 Stepper #if AXIS_IS_TMC(E6) extern TMC_CLASS_E(6) stepperE6; + #ifndef CHOPPER_TIMING_E6 + #define CHOPPER_TIMING_E6 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E6 = CHOPPER_TIMING_E6; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6) #define E6_ENABLE_INIT() NOOP - #define E6_ENABLE_WRITE(STATE) stepperE6.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E6_ENABLE_WRITE(STATE) stepperE6.toff((STATE)==E_ENABLE_ON ? chopper_timing_E6.toff : 0) #define E6_ENABLE_READ() stepperE6.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E6) @@ -285,9 +347,13 @@ void reset_trinamic_drivers(); // E7 Stepper #if AXIS_IS_TMC(E7) extern TMC_CLASS_E(7) stepperE7; + #ifndef CHOPPER_TIMING_E7 + #define CHOPPER_TIMING_E7 CHOPPER_TIMING_E + #endif + static constexpr chopper_timing_t chopper_timing_E7 = CHOPPER_TIMING_E7; #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7) #define E7_ENABLE_INIT() NOOP - #define E7_ENABLE_WRITE(STATE) stepperE7.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E7_ENABLE_WRITE(STATE) stepperE7.toff((STATE)==E_ENABLE_ON ? chopper_timing_E7.toff : 0) #define E7_ENABLE_READ() stepperE7.isEnabled() #endif #if AXIS_HAS_SQUARE_WAVE(E7)