From c2ea22da49a6572842568da99f926d24930ddb2a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 22 May 2017 11:39:57 -0500 Subject: [PATCH] Clean up whitespace --- Marlin/Marlin_main.cpp | 14 +++++++------- .../example_configurations/SCARA/Configuration.h | 2 +- Marlin/example_configurations/TAZ4/Configuration.h | 2 +- .../TinyBoy2/Configuration.h | 2 +- .../example_configurations/WITBOX/Configuration.h | 2 +- .../tvrrug/Round2/Configuration.h | 2 +- Marlin/ubl_G29.cpp | 14 ++++++-------- 7 files changed, 18 insertions(+), 20 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 97253f805..d8f6f26ec 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -5107,9 +5107,9 @@ void home_all_axes() { gcode_G28(true); } * P4-P7 Probe all positions at different locations and average them. * * T Don't calibrate tower angle corrections - * + * * Cn.nn Calibration precision; when omitted calibrates to maximum precision - * + * * Vn Verbose level: * * V0 Dry-run mode. Report settings and probe results. No calibration. @@ -5229,7 +5229,7 @@ void home_all_axes() { gcode_G28(true); } #endif int8_t iterations = 0; - + home_offset[Z_AXIS] -= probe_pt(0.0, 0.0 , true, 1); // 1st probe to set height do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); @@ -5239,7 +5239,7 @@ void home_all_axes() { gcode_G28(true); } int16_t N = 0; test_precision = zero_std_dev_old != 999.0 ? (zero_std_dev + zero_std_dev_old) / 2 : zero_std_dev; - + iterations++; // Probe the points @@ -5286,7 +5286,7 @@ void home_all_axes() { gcode_G28(true); } } zero_std_dev_old = zero_std_dev; zero_std_dev = round(sqrt(S2 / N) * 1000.0) / 1000.0 + 0.00001; - + if (iterations == 1) home_offset[Z_AXIS] = zh_old; // reset height after 1st probe change // Solve matrices @@ -5416,7 +5416,7 @@ void home_all_axes() { gcode_G28(true); } else { SERIAL_PROTOCOLPGM("std dev:"); SERIAL_PROTOCOL_F(zero_std_dev, 3); - } + } SERIAL_EOL; LCD_MESSAGEPGM("Calibration OK"); // TODO: Make translatable string } @@ -5481,7 +5481,7 @@ void home_all_axes() { gcode_G28(true); } home_delta(); endstops.not_homing(); - } + } while (zero_std_dev < test_precision && zero_std_dev > calibration_precision && iterations < 31); #if ENABLED(DELTA_HOME_TO_SAFE_ZONE) diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 0d86d1338..5fda591bb 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -903,7 +903,7 @@ #define UBL_PROBE_PT_3_Y 20 #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 2492fc9ac..528c54e34 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -907,7 +907,7 @@ #define UBL_PROBE_PT_3_Y 20 #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 1bdc0f94e..b10d7b114 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -943,7 +943,7 @@ #define UBL_PROBE_PT_3_Y 20 #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index cb06b543c..7df93fc10 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -878,7 +878,7 @@ #define UBL_PROBE_PT_3_Y 20 #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 550916356..0af2f5bd9 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -883,7 +883,7 @@ #define UBL_PROBE_PT_3_Y 20 #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 4f01dc9f3..506ae6322 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -36,8 +36,7 @@ #define UBL_G29_P31 - extern float destination[XYZE]; - extern float current_position[XYZE]; + extern float destination[XYZE], current_position[XYZE]; void lcd_return_to_status(); bool lcd_clicked(); @@ -63,6 +62,7 @@ #define SIZE_OF_LITTLE_RAISE 1 #define BIG_RAISE_NOT_NEEDED 0 + extern void lcd_status_screen(); typedef void (*screenFunc_t)(); extern void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0); @@ -936,9 +936,7 @@ return current_position[Z_AXIS]; } - static void echo_and_take_a_measurement() { - SERIAL_PROTOCOLLNPGM(" and take a measurement."); - } + static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); } float measure_business_card_thickness(float &in_height) { ubl.has_control_of_lcd_panel = true; @@ -1392,8 +1390,8 @@ for (uint8_t k = 0; k < GRID_MAX_POINTS_X; k++) { for (uint8_t l = 0; l < GRID_MAX_POINTS_Y; l++) { if (i != k && j != l && !isnan(ubl.z_values[k][l])) { -// distance += pow((float) abs(i - k) * (MESH_X_DIST), 2) + pow((float) abs(j - l) * (MESH_Y_DIST), 2); // working here - distance += HYPOT((MESH_X_DIST),(MESH_Y_DIST)) / log(HYPOT((i - k) * (MESH_X_DIST)+.001, (j - l) * (MESH_Y_DIST))+.001); + //distance += pow((float) abs(i - k) * (MESH_X_DIST), 2) + pow((float) abs(j - l) * (MESH_Y_DIST), 2); // working here + distance += HYPOT(MESH_X_DIST, MESH_Y_DIST) / log(HYPOT((i - k) * (MESH_X_DIST) + .001, (j - l) * (MESH_Y_DIST)) + .001); } } } @@ -1474,7 +1472,7 @@ do { new_z = lcd_mesh_edit(); #ifdef UBL_MESH_EDIT_MOVES_Z - do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES+new_z); // Move the nozzle as the point is edited + do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES + new_z); // Move the nozzle as the point is edited #endif idle(); } while (!ubl_lcd_clicked());