Add some more requirements to the G-code list
This commit is contained in:
parent
72de280c1e
commit
c45798694f
@ -51,23 +51,23 @@
|
||||
* G3 - CCW ARC
|
||||
* G4 - Dwell S<seconds> or P<milliseconds>
|
||||
* G5 - Cubic B-spline with XYZE destination and IJPQ offsets
|
||||
* G10 - Retract filament according to settings of M207
|
||||
* G11 - Retract recover filament according to settings of M208
|
||||
* G12 - Clean tool
|
||||
* G10 - Retract filament according to settings of M207 (Requires FWRETRACT)
|
||||
* G11 - Retract recover filament according to settings of M208 (Requires FWRETRACT)
|
||||
* G12 - Clean tool (Requires NOZZLE_CLEAN_FEATURE)
|
||||
* G17 - Select Plane XY (Requires CNC_WORKSPACE_PLANES)
|
||||
* G18 - Select Plane ZX (Requires CNC_WORKSPACE_PLANES)
|
||||
* G19 - Select Plane YZ (Requires CNC_WORKSPACE_PLANES)
|
||||
* G20 - Set input units to inches
|
||||
* G21 - Set input units to millimeters
|
||||
* G20 - Set input units to inches (Requires INCH_MODE_SUPPORT)
|
||||
* G21 - Set input units to millimeters (Requires INCH_MODE_SUPPORT)
|
||||
* G26 - Mesh Validation Pattern (Requires UBL_G26_MESH_VALIDATION)
|
||||
* G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE)
|
||||
* G28 - Home one or more axes
|
||||
* G29 - Detailed Z probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
|
||||
* G29 - Start or continue the bed leveling probe procedure (Requires bed leveling)
|
||||
* G30 - Single Z probe, probes bed at X Y location (defaults to current XY location)
|
||||
* G31 - Dock sled (Z_PROBE_SLED only)
|
||||
* G32 - Undock sled (Z_PROBE_SLED only)
|
||||
* G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION)
|
||||
* G38 - Probe target - similar to G28 except it uses the Z_MIN_PROBE for all three axes
|
||||
* G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET)
|
||||
* G42 - Coordinated move to a mesh point (Requires AUTO_BED_LEVELING_UBL)
|
||||
* G90 - Use Absolute Coordinates
|
||||
* G91 - Use Relative Coordinates
|
||||
|
Loading…
Reference in New Issue
Block a user