diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
index a3fe16125..592a4bca6 100644
--- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
@@ -66,7 +66,7 @@ void spiBegin (void) {
}
-#if DISABLED(SOFTWARE_SPI)
+#if DISABLED(SOFTWARE_SPI, FORCE_SOFT_SPI)
//------------------------------------------------------------------------------
// Hardware SPI
@@ -264,6 +264,6 @@ void spiBegin (void) {
spiSend(buf[i]);
}
-#endif // SOFTWARE_SPI
+#endif // SOFTWARE_SPI, FORCE_SOFT_SPI
#endif // __AVR__
diff --git a/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp b/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
new file mode 100644
index 000000000..774ba36f0
--- /dev/null
+++ b/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
@@ -0,0 +1,195 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Based on u8g_com_st7920_hw_spi.c
+ *
+ * Universal 8bit Graphics Library
+ *
+ * Copyright (c) 2011, olikraus@gmail.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if defined(ARDUINO) && !defined(ARDUINO_ARCH_STM32) && !defined(ARDUINO_ARCH_SAM)
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_GRAPHICAL_LCD
+
+#include "../shared/Marduino.h"
+#include "../shared/Delay.h"
+
+#include
+
+uint8_t u8g_bitData, u8g_bitNotData;
+uint8_t u8g_bitClock, u8g_bitNotClock;
+volatile uint8_t *u8g_outData;
+volatile uint8_t *u8g_outClock;
+
+static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
+ u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
+ u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
+ u8g_bitData = digitalPinToBitMask(dataPin);
+ u8g_bitClock = digitalPinToBitMask(clockPin);
+
+ u8g_bitNotClock = u8g_bitClock;
+ u8g_bitNotClock ^= 0xFF;
+
+ u8g_bitNotData = u8g_bitData;
+ u8g_bitNotData ^= 0xFF;
+}
+
+void U8G_spiSend_sw_AVR_mode_0(uint8_t val) {
+ uint8_t bitData = u8g_bitData;
+ uint8_t bitNotData = u8g_bitNotData;
+ uint8_t bitClock = u8g_bitClock;
+ uint8_t bitNotClock = u8g_bitNotClock;
+ volatile uint8_t *outData = u8g_outData;
+ volatile uint8_t *outClock = u8g_outClock;
+ U8G_ATOMIC_START();
+ for (uint8_t i = 0; i < 8; i++) {
+ if (val & 0x80)
+ *outData |= bitData;
+ else
+ *outData &= bitNotData;
+ *outClock |= bitClock;
+ val <<= 1;
+ *outClock &= bitNotClock;
+ }
+ U8G_ATOMIC_END();
+}
+
+void U8G_spiSend_sw_AVR_mode_3(uint8_t val) {
+ uint8_t bitData = u8g_bitData;
+ uint8_t bitNotData = u8g_bitNotData;
+ uint8_t bitClock = u8g_bitClock;
+ uint8_t bitNotClock = u8g_bitNotClock;
+ volatile uint8_t *outData = u8g_outData;
+ volatile uint8_t *outClock = u8g_outClock;
+ U8G_ATOMIC_START();
+ for (uint8_t i = 0; i < 8; i++) {
+ *outClock &= bitNotClock;
+ if (val & 0x80)
+ *outData |= bitData;
+ else
+ *outData &= bitNotData;
+ *outClock |= bitClock;
+ val <<= 1;
+ }
+ U8G_ATOMIC_END();
+}
+
+
+#if ENABLED(FYSETC_MINI_12864)
+ #define U8G_spiSend_sw_AVR U8G_spiSend_sw_AVR_mode_3
+#else
+ #define U8G_spiSend_sw_AVR U8G_spiSend_sw_AVR_mode_0
+#endif
+
+uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+ switch (msg) {
+ case U8G_COM_MSG_INIT:
+ u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
+ u8g_com_arduino_assign_pin_output_high(u8g);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, 0);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ #if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
+ if (arg_val) { // SCK idle state needs to be set to the proper idle state before
+ // the next chip select goes active
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+ }
+ else {
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
+ }
+ #else
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, !arg_val);
+ #endif
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ U8G_spiSend_sw_AVR(arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ: {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while (arg_val > 0) {
+ U8G_spiSend_sw_AVR(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P: {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while (arg_val > 0) {
+ U8G_spiSend_sw_AVR(u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+ break;
+ }
+ return 1;
+}
+
+#endif // HAS_GRAPHICAL_LCD
+#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi.cpp
new file mode 100644
index 000000000..7b3479f21
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi.cpp
@@ -0,0 +1,154 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Based on u8g_com_std_sw_spi.c
+ *
+ * Universal 8bit Graphics Library
+ *
+ * Copyright (c) 2015, olikraus@gmail.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_GRAPHICAL_LCD && !ENABLED(U8GLIB_ST7920)
+
+#undef SPI_SPEED
+#define SPI_SPEED 2 // About 2 MHz
+
+#include "../shared/Marduino.h"
+#include "../shared/Delay.h"
+
+#include
+
+void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
+void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);
+void U8G_spiSend_sw_DUE_mode_0(uint8_t val);
+void U8G_spiSend_sw_DUE_mode_3(uint8_t val);
+
+Pio *SCK_pPio, *MOSI_pPio;
+uint32_t SCK_dwMask, MOSI_dwMask;
+
+#if ENABLED(FYSETC_MINI_12864)
+ #define U8G_spiSend_sw_DUE U8G_spiSend_sw_DUE_mode_3
+#else
+ #define U8G_spiSend_sw_DUE U8G_spiSend_sw_DUE_mode_0
+#endif
+
+uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+ switch (msg) {
+ case U8G_COM_MSG_INIT:
+ SCK_pPio = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].pPort;
+ SCK_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].ulPin;
+ MOSI_pPio = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].pPort;
+ MOSI_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].ulPin;
+ u8g_SetPIOutput_DUE(u8g, U8G_PI_SCK);
+ u8g_SetPIOutput_DUE(u8g, U8G_PI_MOSI);
+ u8g_SetPIOutput_DUE(u8g, U8G_PI_CS);
+ u8g_SetPIOutput_DUE(u8g, U8G_PI_A0);
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput_DUE(u8g, U8G_PI_RESET);
+ u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);
+ u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 0);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel_DUE(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ #if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
+ if (arg_val) { // SCK idle state needs to be set to the proper idle state before
+ // the next chip select goes active
+ u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1); //set SCK to mode 3 idle state before CS goes active
+ u8g_SetPILevel_DUE(u8g, U8G_PI_CS, LOW);
+ }
+ else {
+ u8g_SetPILevel_DUE(u8g, U8G_PI_CS, HIGH);
+ u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0); //set SCK to mode 0 idle state after CS goes inactive
+ }
+ #else
+ u8g_SetPILevel_DUE(u8g, U8G_PI_CS, !arg_val);
+ #endif
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ U8G_spiSend_sw_DUE(arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ: {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while (arg_val > 0) {
+ U8G_spiSend_sw_DUE(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P: {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while (arg_val > 0) {
+ U8G_spiSend_sw_DUE(u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_SetPILevel_DUE(u8g, U8G_PI_A0, arg_val);
+ break;
+ }
+ return 1;
+}
+
+#endif // HAS_GRAPHICAL_LCD
+#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.cpp
new file mode 100644
index 000000000..9e2f5443e
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.cpp
@@ -0,0 +1,114 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Based on u8g_com_st7920_hw_spi.c
+ *
+ * Universal 8bit Graphics Library
+ *
+ * Copyright (c) 2011, olikraus@gmail.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfigPre.h"
+
+//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\inc\MarlinConfigPre.h
+//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\u8g_com_HAL_DUE_sw_spi_shared.cpp
+
+#if HAS_GRAPHICAL_LCD
+
+#include "../shared/Marduino.h"
+#include "../shared/Delay.h"
+
+#include
+
+void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
+ PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
+ g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
+}
+
+void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
+ volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
+ uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
+ if (level) port->PIO_SODR = mask; else port->PIO_CODR = mask;
+}
+
+extern Pio *SCK_pPio, *MOSI_pPio;
+extern uint32_t SCK_dwMask, MOSI_dwMask;
+
+void U8G_spiSend_sw_DUE_mode_0(uint8_t val) { // 800KHz
+ for (uint8_t i = 0; i < 8; i++) {
+ if (val & 0x80)
+ MOSI_pPio->PIO_SODR = MOSI_dwMask;
+ else
+ MOSI_pPio->PIO_CODR = MOSI_dwMask;
+ DELAY_NS(48);
+ SCK_pPio->PIO_SODR = SCK_dwMask;
+ DELAY_NS(905); // 762 dead, 810 garbage, 858/0 900kHz, 905/1 825k, 953/1 800k, 1000/2 725KHz
+ val <<= 1;
+ SCK_pPio->PIO_CODR = SCK_dwMask;
+ }
+}
+
+
+void U8G_spiSend_sw_DUE_mode_3(uint8_t val) { // 800KHz
+ for (uint8_t i = 0; i < 8; i++) {
+ SCK_pPio->PIO_CODR = SCK_dwMask;
+ DELAY_NS(48);
+ if (val & 0x80)
+ MOSI_pPio->PIO_SODR = MOSI_dwMask;
+ else
+ MOSI_pPio->PIO_CODR = MOSI_dwMask;
+ SCK_pPio->PIO_SODR = SCK_dwMask;
+ DELAY_NS(905); // 762 dead, 810 garbage, 858/0 900kHz, 905/1 825k, 953/1 800k, 1000/2 725KHz
+ val <<= 1;
+ }
+}
+
+#endif // HAS_GRAPHICAL_LCD
+#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
index 860321aa7..15bcebabb 100644
--- a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
@@ -158,7 +158,19 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
break;
case U8G_COM_MSG_CHIP_SELECT:
- u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
+ #if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
+ if (arg_val) { // SCK idle state needs to be set to the proper idle state before
+ // the next chip select goes active
+ u8g_SetPILevel(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
+ u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
+ }
+ else {
+ u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
+ u8g_SetPILevel(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
+ }
+ #else
+ u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
+ #endif
break;
case U8G_COM_MSG_WRITE_BYTE:
@@ -192,5 +204,4 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
}
#endif // HAS_GRAPHICAL_LCD
-
#endif // TARGET_LPC1768
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
index 79f7f2f35..f0d795b84 100644
--- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
+++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
@@ -24,16 +24,20 @@
#ifndef U8G_HAL_LINKS
- uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
- #define U8G_COM_HAL_SW_SPI_FN u8g_com_arduino_sw_spi_fn
#ifdef __SAM3X8E__
+ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_DUE_sw_spi_fn
+
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_com_HAL_DUE_shared_hw_spi_fn
uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_HAL_DUE_ST7920_sw_spi_fn
#else
+ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_AVR_sw_sp_fn
+
uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_com_arduino_hw_spi_fn
diff --git a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
index 659e0c889..c26b0d081 100644
--- a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
+++ b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
@@ -207,8 +207,10 @@
#define LCD_BACKLIGHT_PIN -1
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
#define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
diff --git a/Marlin/src/pins/pins_MKS_SBASE.h b/Marlin/src/pins/pins_MKS_SBASE.h
index 0e38fb9e1..dd333745c 100644
--- a/Marlin/src/pins/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/pins_MKS_SBASE.h
@@ -259,6 +259,9 @@
#define DOGLCD_SCK P2_11 // J8-5 (SCK on Fysetc schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on Fysetc schematic)
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on Fysetc schematic)
diff --git a/Marlin/src/pins/pins_RAMPS.h b/Marlin/src/pins/pins_RAMPS.h
index 463c3cf4d..a0980dbf8 100644
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@@ -538,8 +538,12 @@
#define SD_DETECT_PIN 49
+
+
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h
index 61657b071..e64b9cfd2 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@@ -155,11 +155,13 @@
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
+ #define DOGLCD_SCK 76
+ #define DOGLCD_MOSI 75
- //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
index b7d7f05be..a40239c49 100644
--- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
@@ -347,9 +347,28 @@
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
- #define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
+
+ // EXP1 on LCD adapter is not usable - using Ethernet connector instead
+ #define DOGLCD_CS P1_09
#define DOGLCD_A0 P1_14
- #define FORCE_SOFT_SPI // required on a Re-ARM system
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+ #define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
+
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN P1_00
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN P1_01
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN P1_08
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN P1_00
+ #endif
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
diff --git a/Marlin/src/pins/pins_RUMBA.h b/Marlin/src/pins/pins_RUMBA.h
index e0bed70e2..f002a4f53 100644
--- a/Marlin/src/pins/pins_RUMBA.h
+++ b/Marlin/src/pins/pins_RUMBA.h
@@ -175,6 +175,31 @@
#define DOGLCD_MOSI 42
#define DOGLCD_SCK 18
#define DOGLCD_A0 LCD_PINS_DC
+#elif ENABLED(FYSETC_MINI_12864)
+ #define DOGLCD_CS 42
+ #define DOGLCD_A0 19
+ #define DOGLCD_MOSI 51
+ #define DOGLCD_SCK 52
+
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+ #define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally.
+
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN 41
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN 38
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN 40
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN 25
+ #endif
+
#else
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
diff --git a/Marlin/src/pins/pins_RURAMPS4D_11.h b/Marlin/src/pins/pins_RURAMPS4D_11.h
index 71a5cc19f..ac188ec33 100644
--- a/Marlin/src/pins/pins_RURAMPS4D_11.h
+++ b/Marlin/src/pins/pins_RURAMPS4D_11.h
@@ -233,10 +233,10 @@
#define DOGLCD_CS 64
#define DOGLCD_A0 63
- //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
diff --git a/Marlin/src/pins/pins_RURAMPS4D_13.h b/Marlin/src/pins/pins_RURAMPS4D_13.h
index b36327e1b..c224d5782 100644
--- a/Marlin/src/pins/pins_RURAMPS4D_13.h
+++ b/Marlin/src/pins/pins_RURAMPS4D_13.h
@@ -219,10 +219,10 @@
#define DOGLCD_CS 64
#define DOGLCD_A0 63
- //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN