Compile only selected PIO environment (#11519)

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -34,7 +34,7 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 
-#include "../HAL_SPI.h"
+#include "../shared/HAL_SPI.h"
 #include "fastio_AVR.h"
 #include "watchdog_AVR.h"
 #include "math_AVR.h"

Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp

@@ -25,7 +25,7 @@
 
 #if ENABLED(EEPROM_SETTINGS)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 
 bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }

Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp

@@ -0,0 +1,51 @@
+#ifdef __AVR__
+
+#include "../shared/persistent_store_api.h"
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
+namespace HAL {
+namespace PersistentStore {
+
+bool access_start() { return true; }
+bool access_finish() { return true; }
+
+bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  };
+  return false;
+}
+
+bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((unsigned char*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;  // always assume success for AVR's
+}
+
+}
+}
+
+#endif // EEPROM_SETTINGS
+#endif // __AVR__

Marlin/src/HAL/HAL_AVR/servo_AVR.cpp

@@ -60,8 +60,8 @@
 #include <avr/interrupt.h>
 #include <Arduino.h>
 
-#include "../servo.h"
-#include "../servo_private.h"
+#include "../shared/servo.h"
+#include "../shared/servo_private.h"
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 

Marlin/src/HAL/HAL_DUE/EepromEmulation_Due.cpp

@@ -31,7 +31,7 @@
 
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(EEPROM_SETTINGS) && DISABLED(I2C_EEPROM) && DISABLED(SPI_EEPROM)

Marlin/src/HAL/HAL_DUE/HAL.h

@@ -35,8 +35,8 @@
 
 #include <Arduino.h>
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 #include "fastio_Due.h"
 #include "watchdog_Due.h"
 #include "HAL_timers_Due.h"

Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp

@@ -42,7 +42,7 @@
 // --------------------------------------------------------------------------
 
 #include "../../inc/MarlinConfig.h"
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 // --------------------------------------------------------------------------
 // Public Variables

Marlin/src/HAL/HAL_DUE/Servo_Due.cpp

@@ -46,7 +46,7 @@
 
 #include <Arduino.h>
 #include "../servo.h"
-#include "../servo_private.h"
+#include "../shared/servo_private.h"
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 

Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp

@@ -22,12 +22,12 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../persistent_store_api.h"
-
-#include "../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(EEPROM_SETTINGS)
 
+#include "../shared/persistent_store_api.h"
+
 extern void eeprom_flush(void);
 
 bool PersistentStore::access_start() { return true; }

Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp

@@ -0,0 +1,59 @@
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../shared/persistent_store_api.h"
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
+extern void eeprom_flush(void);
+
+namespace HAL {
+namespace PersistentStore {
+
+bool access_start() { return true; }
+
+bool access_finish() {
+  #if DISABLED(I2C_EEPROM) && DISABLED(SPI_EEPROM)
+    eeprom_flush();
+  #endif
+  return true;
+}
+
+bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  };
+  return false;
+}
+
+bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((unsigned char*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+}
+}
+
+#endif // EEPROM_SETTINGS
+#endif // __AVR__

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -61,7 +61,7 @@
 
 #include <U8glib.h>
 #include <Arduino.h>
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
    PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,

Marlin/src/HAL/HAL_ESP32/HAL.h

@@ -40,8 +40,8 @@
 #undef DISABLED
 #define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 
 #include "fastio_ESP32.h"
 #include "watchdog_ESP32.h"

Marlin/src/HAL/HAL_ESP32/HAL_spi_ESP32.cpp

@@ -28,7 +28,7 @@
 // --------------------------------------------------------------------------
 
 #include "HAL.h"
-#include "../HAL_SPI.h"
+#include "../shared/HAL_SPI.h"
 #include "pins_arduino.h"
 #include "spi_pins.h"
 #include "../../core/macros.h"

Marlin/src/HAL/HAL_LPC1768/HAL.cpp

@@ -21,7 +21,7 @@
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfig.h"
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 HalSerial usb_serial;
 

Marlin/src/HAL/HAL_LPC1768/HAL.h

@@ -60,8 +60,8 @@ extern "C" volatile uint32_t _millis;
 #include <Arduino.h>
 #include <pinmapping.h>
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
 #include "serial.h"

Marlin/src/HAL/HAL_LPC1768/arduino.cpp

@@ -26,7 +26,7 @@
 #include <lpc17xx_pinsel.h>
 
 #include "../../inc/MarlinConfig.h"
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 // Interrupts
 void cli(void) { __disable_irq(); } // Disable

Marlin/src/HAL/HAL_LPC1768/include/SPI.h

@@ -22,7 +22,7 @@
 
 #pragma once
 
-#include "../../HAL_SPI.h"
+#include "../../shared/HAL_SPI.h"
 
 #include <stdint.h>
 

Marlin/src/HAL/HAL_LPC1768/include/SoftwareSerial.cpp

@@ -37,7 +37,7 @@
 //
 //#include <WInterrupts.h>
 #include "../../../inc/MarlinConfig.h"
-#include "../../Delay.h"
+#include "../../shared/Delay.h"
 #include <stdint.h>
 #include <stdarg.h>
 #include <Arduino.h>

Marlin/src/HAL/HAL_LPC1768/persistent_store_api.h

@@ -19,6 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 
 //#define FLASH_EEPROM

Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp

@@ -61,7 +61,7 @@
 
 //#include <inttypes.h>
 #include <U8glib.h>
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 #define SPI_FULL_SPEED 0
 #define SPI_HALF_SPEED 1

Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp

@@ -61,7 +61,7 @@
 
 #include <U8glib.h>
 #include "SoftwareSPI.h"
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 #define SPI_SPEED 3  // About 1 MHz
 

Marlin/src/HAL/HAL_STM32F1/HAL.h

@@ -56,8 +56,8 @@
 // Includes
 // --------------------------------------------------------------------------
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 
 #include "fastio_Stm32f1.h"
 #include "watchdog_Stm32f1.h"

Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp

@@ -37,7 +37,7 @@
 // --------------------------------------------------------------------------
 
 #include "HAL.h"
-#include "../HAL_SPI.h"
+#include "../shared/HAL_SPI.h"
 #include "pins_arduino.h"
 #include "spi_pins.h"
 #include "../../core/macros.h"

Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp

@@ -34,7 +34,7 @@
 // This is for EEPROM emulation in flash
 #if ENABLED(EEPROM_SETTINGS) && ENABLED(FLASH_EEPROM_EMULATION)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 
 #include <flash_stm32.h>
 #include <EEPROM.h>

Marlin/src/HAL/HAL_STM32F1/persistent_store_sdcard.cpp

@@ -31,7 +31,8 @@
 
 #if ENABLED(EEPROM_SETTINGS) && DISABLED(FLASH_EEPROM_EMULATION)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
+
 #include "../../sd/cardreader.h"
 
 #define HAL_STM32F1_EEPROM_SIZE 4096

Marlin/src/HAL/HAL_STM32F4/HAL.h

@@ -43,8 +43,8 @@
   #include <USBSerial.h>
 #endif
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 #include "fastio_STM32F4.h"
 #include "watchdog_STM32F4.h"
 

Marlin/src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp

@@ -37,7 +37,7 @@
 // --------------------------------------------------------------------------
 
 #include "HAL.h"
-#include "../HAL_SPI.h"
+#include "../shared/HAL_SPI.h"
 #include "pins_arduino.h"
 #include "spi_pins.h"
 #include "../../core/macros.h"

Marlin/src/HAL/HAL_STM32F4/persistent_store_eeprom.cpp

@@ -23,7 +23,7 @@
 
 #if defined(STM32F4) || defined(STM32F4xx)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 
 #include "../../inc/MarlinConfig.h"
 

Marlin/src/HAL/HAL_STM32F7/HAL.h

@@ -39,8 +39,8 @@
 
 #include "Arduino.h"
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 
 #include "fastio_STM32F7.h"
 #include "watchdog_STM32F7.h"

Marlin/src/HAL/HAL_STM32F7/HAL_spi_STM32F7.cpp

@@ -37,7 +37,7 @@
 // --------------------------------------------------------------------------
 
 #include "HAL.h"
-#include "../HAL_SPI.h"
+#include "../shared/HAL_SPI.h"
 #include "pins_arduino.h"
 #include "spi_pins.h"
 #include "../../core/macros.h"

Marlin/src/HAL/HAL_STM32F7/persistent_store_eeprom.cpp

@@ -23,11 +23,11 @@
 
 #ifdef STM32F7
 
-#include "../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(EEPROM_SETTINGS)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 
 bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }

Marlin/src/HAL/HAL_TEENSY35_36/HAL.cpp

@@ -26,7 +26,7 @@
 #if defined(__MK64FX512__) || defined(__MK66FX1M0__)
 
 #include "HAL.h"
-#include "../Delay.h"
+#include "../shared/Delay.h"
 
 #include <Wire.h>
 

Marlin/src/HAL/HAL_TEENSY35_36/HAL.h

@@ -42,8 +42,8 @@
 #undef sq
 #define sq(x) ((x)*(x))
 
-#include "../math_32bit.h"
-#include "../HAL_SPI.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
 
 #include "fastio_Teensy.h"
 #include "watchdog_Teensy.h"

Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_eeprom.cpp

@@ -27,7 +27,7 @@
 
 #if ENABLED(EEPROM_SETTINGS)
 
-#include "../persistent_store_api.h"
+#include "../shared/persistent_store_api.h"
 #include <avr/eeprom.h>
 
 bool PersistentStore::access_start() { return true; }

Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp

@@ -0,0 +1,51 @@
+#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
+#include "../shared/persistent_store_api.h"
+
+namespace HAL {
+namespace PersistentStore {
+
+bool access_start() { return true; }
+bool access_finish() { return true; }
+
+bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  };
+  return false;
+}
+
+bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((unsigned char*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+} // PersistentStore
+} // HAL
+
+#endif // EEPROM_SETTINGS
+#endif // __MK64FX512__ || __MK66FX1M0__

Marlin/src/HAL/persistent_store_api.cpp

@@ -24,7 +24,7 @@
 
 #if ENABLED(EEPROM_SETTINGS)
 
-  #include "persistent_store_api.h"
+  #include "shared/persistent_store_api.h"
   PersistentStore persistentStore;
 
 #endif

Marlin/src/HAL/shared/Delay.h

@@ -31,7 +31,7 @@
 #ifndef MARLIN_DELAY_H
 #define MARLIN_DELAY_H
 
-#include "../core/macros.h"
+#include "../../core/macros.h"
 
 #if defined(__arm__) || defined(__thumb__)
 

Marlin/src/HAL/shared/I2cEeprom.cpp

@@ -25,7 +25,7 @@
  * Not platform dependent.
  */
 
-#include "../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #if ENABLED(I2C_EEPROM)
 

Marlin/src/HAL/shared/SpiEeprom.cpp

@@ -25,7 +25,7 @@
  * Not platform dependent.
  */
 
-#include "../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #if ENABLED(SPI_EEPROM)
 

Marlin/src/HAL/shared/math_32bit.h

@@ -23,7 +23,7 @@
 #ifndef MATH_32BIT_H
 #define MATH_32BIT_H
 
-#include "../core/macros.h"
+#include "../../core/macros.h"
 
 /**
  * Math helper functions for 32 bit CPUs

Marlin/src/HAL/shared/servo.cpp

@@ -51,7 +51,7 @@
  *
  */
 
-#include "../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F4) || defined(STM32F4xx))
 

Marlin/src/HAL/shared/servo.h

@@ -70,12 +70,12 @@
 #define SERVO_H
 
 #if IS_32BIT_TEENSY
-  #include "HAL_TEENSY35_36/HAL_Servo_Teensy.h" // Teensy HAL uses an inherited library
+  #include "../HAL_TEENSY35_36/HAL_Servo_Teensy.h" // Teensy HAL uses an inherited library
 
 #elif defined(TARGET_LPC1768)
-  #include "HAL_LPC1768/LPC1768_Servo.h"
+  #include "../HAL_LPC1768/LPC1768_Servo.h"
 #elif defined(STM32F4) || defined(STM32F4xx)
-  #include "HAL_STM32F4/HAL_Servo_STM32F4.h"
+  #include "../HAL_STM32F4/HAL_Servo_STM32F4.h"
 #else
   #include <stdint.h>
 

Marlin/src/HAL/shared/servo_private.h

@@ -46,9 +46,9 @@
 
 // Architecture specific include
 #ifdef __AVR__
-  #include "HAL_AVR/ServoTimers.h"
+  #include "../HAL_AVR/ServoTimers.h"
 #elif defined(ARDUINO_ARCH_SAM)
-  #include "HAL_DUE/ServoTimers.h"
+  #include "../HAL_DUE/ServoTimers.h"
 #else
   #error "This library only supports boards with an AVR or SAM3X processor."
 #endif

Marlin/src/feature/Max7219_Debug_LEDs.cpp

@@ -46,7 +46,7 @@
 #include "../module/planner.h"
 #include "../module/stepper.h"
 #include "../Marlin.h"
-#include "../HAL/Delay.h"
+#include "../HAL/shared/Delay.h"
 
 uint8_t LEDs[8 * (MAX7219_NUMBER_UNITS)] = { 0 };
 

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -29,7 +29,7 @@
   #include "ubl.h"
 
   #include "../../../Marlin.h"
-  #include "../../../HAL/persistent_store_api.h"
+  #include "../../../HAL/shared/persistent_store_api.h"
   #include "../../../libs/hex_print_routines.h"
   #include "../../../module/configuration_store.h"
   #include "../../../lcd/ultralcd.h"

Marlin/src/feature/dac/dac_dac084s085.cpp

@@ -12,7 +12,7 @@
 
 #include "../../Marlin.h"
 #include "../../module/stepper.h"
-#include "../../HAL/Delay.h"
+#include "../../HAL/shared/Delay.h"
 
 dac084s085::dac084s085() { }
 

Marlin/src/inc/MarlinConfigPre.h

@@ -23,7 +23,7 @@
 #ifndef _MARLIN_CONFIGPRE_H_
 #define _MARLIN_CONFIGPRE_H_
 
-#include "../HAL/platforms.h"
+#include "../HAL/shared/platforms.h"
 #include "../core/boards.h"
 #include "../core/macros.h"
 #include "../core/types.h"

Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp

@@ -29,7 +29,7 @@
 
 #if !(defined(U8G_HAL_LINKS) || defined(__SAM3X8E__))
 
-#include "../../HAL/Delay.h"
+#include "../../HAL/shared/Delay.h"
 
 #define ST7920_CLK_PIN  LCD_PINS_D4
 #define ST7920_DAT_PIN  LCD_PINS_ENABLE

Marlin/src/module/configuration_store.cpp

@@ -344,7 +344,7 @@ void MarlinSettings::postprocess() {
 }
 
 #if ENABLED(EEPROM_SETTINGS)
-  #include "../HAL/persistent_store_api.h"
+  #include "../HAL/shared/persistent_store_api.h"
 
   #define DUMMY_PID_VALUE 3000.0f
   #define EEPROM_START() int eeprom_index = EEPROM_OFFSET; persistentStore.access_start()

Marlin/src/module/configuration_store.h

@@ -24,8 +24,9 @@
 #define CONFIGURATION_STORE_H
 
 #include "../inc/MarlinConfig.h"
+
 #if ENABLED(EEPROM_SETTINGS)
-  #include "../HAL/persistent_store_api.h"
+  #include "../HAL/shared/persistent_store_api.h"
 #endif
 
 #define ADD_PORT_ARG ENABLED(EEPROM_CHITCHAT) && NUM_SERIAL > 1

Marlin/src/module/printcounter.cpp

@@ -31,7 +31,7 @@ Stopwatch print_job_timer;      // Global Print Job Timer instance
 
 #include "printcounter.h"
 #include "../Marlin.h"
-#include "../HAL/persistent_store_api.h"
+#include "../HAL/shared/persistent_store_api.h"
 
 PrintCounter print_job_timer;   // Global Print Job Timer instance
 

Marlin/src/module/servo.h

@@ -27,7 +27,7 @@
 #ifndef _SERVO_H_
 #define _SERVO_H_
 
-#include "../HAL/servo.h"
+#include "../HAL/shared/servo.h"
 
 extern HAL_SERVO_LIB servo[NUM_SERVOS];
 extern void servo_init();

Marlin/src/module/stepper.cpp

@@ -93,7 +93,7 @@
 #include "../gcode/queue.h"
 #include "../sd/cardreader.h"
 #include "../Marlin.h"
-#include "../HAL/Delay.h"
+#include "../HAL/shared/Delay.h"
 
 #if MB(ALLIGATOR)
   #include "../feature/dac/dac_dac084s085.h"

Marlin/src/module/temperature.cpp

@@ -31,7 +31,7 @@
 #include "../lcd/ultralcd.h"
 #include "planner.h"
 #include "../core/language.h"
-#include "../HAL/Delay.h"
+#include "../HAL/shared/Delay.h"
 
 #if ENABLED(HEATER_0_USES_MAX6675)
   #include "../libs/private_spi.h"

platformio.ini

@@ -58,7 +58,7 @@ board             = megaatmega2560
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-src_filter        = ${common.default_src_filter}
+src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000
 
 #
@@ -71,7 +71,7 @@ board             = megaatmega1280
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-src_filter        = ${common.default_src_filter}
+src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000
 
 #
@@ -88,7 +88,7 @@ board         = at90usb1286
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
 lib_ldf_mode  = deep+
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_CDC.py
 monitor_speed = 250000
 
@@ -122,7 +122,7 @@ board         = due
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
 lib_ignore    = c1921b4
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000
 [env:DUE_USB]
 platform      = atmelsam
@@ -131,7 +131,7 @@ board         = dueUSB
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
 lib_ignore    = c1921b4
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000
 [env:DUE_debug]
 # Used when WATCHDOG_RESET_MANUAL is enabled
@@ -143,7 +143,7 @@ build_flags   = ${common.build_flags}
   -mpoke-function-name
 lib_deps      = ${common.lib_deps}
 lib_ignore    = c1921b4
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000
 
 #
@@ -165,7 +165,7 @@ lib_deps          = CMSIS-LPC1768
   TMC2130Stepper@>=2.2.1
   TMC2208Stepper@>=0.2.1
 extra_scripts     = Marlin/src/HAL/HAL_LPC1768/debug_extra_script.py, Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py, Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
-src_filter        = ${common.default_src_filter}
+src_filter        = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
 monitor_speed     = 250000
 debug_tool        = custom
 debug_server      =
@@ -187,7 +187,7 @@ board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags}
 upload_speed  = 57600
 lib_deps      = ${common.lib_deps}
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000
 
 #
@@ -200,7 +200,7 @@ board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags}
 upload_speed  = 115200
 lib_deps      = ${common.lib_deps}
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000
 
 #
@@ -213,7 +213,7 @@ board             = reprap_rambo
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-src_filter        = ${common.default_src_filter}
+src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000
 
 #
@@ -225,7 +225,7 @@ framework     = arduino
 board         = sanguino_atmega644p
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000
 
 #
@@ -237,7 +237,7 @@ framework     = arduino
 board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000
 
 #
@@ -259,7 +259,7 @@ lib_ignore    = U8glib-HAL
   libf3e
   TMC26XStepper
 lib_ldf_mode  = 1
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 monitor_speed = 250000
 
 #
@@ -272,7 +272,7 @@ board         = disco_f407vg
 build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
 lib_deps      = ${common.lib_deps}
 lib_ignore    = Adafruit NeoPixel, c1921b4, TMC2130Stepper
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F4>
 monitor_speed = 250000
 
 #
@@ -285,7 +285,7 @@ board         = teensy35
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
 lib_ignore    = Adafruit NeoPixel
-src_filter    = ${common.default_src_filter}
+src_filter    = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
 monitor_speed = 250000
 
 [env:malyanm200]
@@ -293,7 +293,7 @@ platform    = ststm32
 framework   = arduino
 board       = malyanM200
 build_flags = !python Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
-src_filter  = ${common.default_src_filter}
+src_filter  = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 #-<frameworks>
 lib_ignore  =
   U8glib
@@ -324,3 +324,4 @@ lib_ignore  =
   LiquidTWI2
   TMC26XStepper
   c1921b4
+src_filter  = ${common.default_src_filter} +<src/HAL/HAL_ESP32>