From c6946084505149b2d20e0129eb13130f7a6af53d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 21 Dec 2017 21:43:39 -0600 Subject: [PATCH] Apply SCARA_FEEDRATE_SCALING to G2/G3 --- Marlin/src/gcode/motion/G2_G3.cpp | 51 ++++++++++++++++++++++++------- Marlin/src/module/motion.cpp | 29 ++++++------------ 2 files changed, 50 insertions(+), 30 deletions(-) diff --git a/Marlin/src/gcode/motion/G2_G3.cpp b/Marlin/src/gcode/motion/G2_G3.cpp index c369be034..921a33450 100644 --- a/Marlin/src/gcode/motion/G2_G3.cpp +++ b/Marlin/src/gcode/motion/G2_G3.cpp @@ -29,6 +29,12 @@ #include "../../module/planner.h" #include "../../module/temperature.h" +#if ENABLED(DELTA) + #include "../../module/delta.h" +#elif ENABLED(SCARA) + #include "../../module/scara.h" +#endif + #if N_ARC_CORRECTION < 1 #undef N_ARC_CORRECTION #define N_ARC_CORRECTION 1 @@ -113,7 +119,7 @@ void plan_arc( * This is important when there are successive arc motions. */ // Vector rotation matrix values - float arc_target[XYZE]; + float raw[XYZE]; const float theta_per_segment = angular_travel / segments, linear_per_segment = linear_travel / segments, extruder_per_segment = extruder_travel / segments, @@ -121,10 +127,10 @@ void plan_arc( cos_T = 1 - 0.5 * sq(theta_per_segment); // Small angle approximation // Initialize the linear axis - arc_target[l_axis] = current_position[l_axis]; + raw[l_axis] = current_position[l_axis]; // Initialize the extruder axis - arc_target[E_AXIS] = current_position[E_AXIS]; + raw[E_AXIS] = current_position[E_AXIS]; const float fr_mm_s = MMS_SCALED(feedrate_mm_s); @@ -134,6 +140,14 @@ void plan_arc( int8_t arc_recalc_count = N_ARC_CORRECTION; #endif + #if ENABLED(SCARA_FEEDRATE_SCALING) + // SCARA needs to scale the feed rate from mm/s to degrees/s + const float inv_segment_length = 1.0 / (MM_PER_ARC_SEGMENT), + inverse_secs = inv_segment_length * fr_mm_s; + float oldA = stepper.get_axis_position_degrees(A_AXIS), + oldB = stepper.get_axis_position_degrees(B_AXIS); + #endif + for (uint16_t i = 1; i < segments; i++) { // Iterate (segments-1) times thermalManager.manage_heater(); @@ -165,19 +179,34 @@ void plan_arc( r_Q = -offset[0] * sin_Ti - offset[1] * cos_Ti; } - // Update arc_target location - arc_target[p_axis] = center_P + r_P; - arc_target[q_axis] = center_Q + r_Q; - arc_target[l_axis] += linear_per_segment; - arc_target[E_AXIS] += extruder_per_segment; + // Update raw location + raw[p_axis] = center_P + r_P; + raw[q_axis] = center_Q + r_Q; + raw[l_axis] += linear_per_segment; + raw[E_AXIS] += extruder_per_segment; - clamp_to_software_endstops(arc_target); + clamp_to_software_endstops(raw); - planner.buffer_line_kinematic(arc_target, fr_mm_s, active_extruder); + #if ENABLED(SCARA_FEEDRATE_SCALING) + // For SCARA scale the feed rate from mm/s to degrees/s. + // i.e., Complete the angular vector in the given time. + inverse_kinematics(raw); + ADJUST_DELTA(raw); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; + #else + planner.buffer_line_kinematic(raw, fr_mm_s, active_extruder); + #endif } // Ensure last segment arrives at target location. - planner.buffer_line_kinematic(cart, fr_mm_s, active_extruder); + #if ENABLED(SCARA_FEEDRATE_SCALING) + inverse_kinematics(cart); + ADJUST_DELTA(cart); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); + #else + planner.buffer_line_kinematic(cart, fr_mm_s, active_extruder); + #endif // As far as the parser is concerned, the position is now == target. In reality the // motion control system might still be processing the action and the real tool position diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp index 731335356..11803c184 100644 --- a/Marlin/src/module/motion.cpp +++ b/Marlin/src/module/motion.cpp @@ -587,7 +587,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, // SERIAL_ECHOPAIR(" seconds=", seconds); // SERIAL_ECHOLNPAIR(" segments=", segments); - #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING) + #if ENABLED(SCARA_FEEDRATE_SCALING) // SCARA needs to scale the feed rate from mm/s to degrees/s const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs inverse_secs = inv_segment_length * _feedrate_mm_s; @@ -611,38 +611,29 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, } LOOP_XYZE(i) raw[i] += segment_distance[i]; + #if ENABLED(DELTA) DELTA_RAW_IK(); // Delta can inline its kinematics #else inverse_kinematics(raw); #endif - ADJUST_DELTA(raw); // Adjust Z if bed leveling is enabled - #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING) + #if ENABLED(SCARA_FEEDRATE_SCALING) // For SCARA scale the feed rate from mm/s to degrees/s - // Use ratio between the length of the move and the larger angle change - const float adiff = abs(delta[A_AXIS] - oldA), - bdiff = abs(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * inverse_secs, active_extruder); - oldA = delta[A_AXIS]; - oldB = delta[B_AXIS]; + // i.e., Complete the angular vector in the given time. + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; #else - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder); + planner.buffer_line(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder); #endif } - // Since segment_distance is only approximate, - // the final move must be to the exact destination. - - #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING) - // For SCARA scale the feed rate from mm/s to degrees/s - // With segments > 1 length is 1 segment, otherwise total length + // Ensure last segment arrives at target location. + #if ENABLED(SCARA_FEEDRATE_SCALING) inverse_kinematics(rtarget); ADJUST_DELTA(rtarget); - const float adiff = abs(delta[A_AXIS] - oldA), - bdiff = abs(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); #else planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder); #endif