MKS Robin: SD pins not required (SDIO) (#15474)

This commit is contained in:
Tanguy Pruvot 2019-10-07 06:20:43 +02:00 committed by Scott Lahteine
parent 519cc1bc67
commit c6ffa7f38d

View File

@ -23,6 +23,8 @@
/**
* MKS Robin (STM32F130ZET6) board pin assignments
*
* https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware
*/
#ifndef __STM32F1__
@ -36,7 +38,7 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
#define DISABLE_JTAG
//
// Servos
@ -110,7 +112,7 @@
/**
* Note: MKS Robin TFT screens use various TFT controllers. Supported screens
* are based on the ILI9342, ILI9328 and ST7798V. Define init sequences for
* are based on the ILI9341, ILI9328 and ST7798V. Define init sequences for
* other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
*
* If the screen stays white, disable 'LCD_RESET_PIN'
@ -125,21 +127,28 @@
#define FSMC_RS_PIN PF0 // A0
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PB1
#define TOUCH_CS_PIN PB1 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#endif
//
// Custom SPI pins
//
#define SCK_PIN PC12
#define MISO_PIN PC8
#define MOSI_PIN PD2
#define SS_PIN -1
// SPI1(PA7) & SPI3(PB5) not available
#define ENABLE_SPI2
//
// Onboard SD Card
//
#define ONBOARD_SD_CS PC11
#define SDSS PD2
#define SD_DETECT_PIN -1 // PF12
#if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2
#define MISO_PIN PB14 // SPI2
#define MOSI_PIN PB15 // SPI2
#define SS_PIN -1 // PB12 is X-
#define SD_DETECT_PIN PF12 // SD_CD
#else
// SD as custom software SPI (SDIO pins)
#define SCK_PIN PC12
#define MISO_PIN PC8
#define MOSI_PIN PD2
#define SS_PIN -1
#define ONBOARD_SD_CS_PIN PC11
#define SDSS PD2
#define SD_DETECT_PIN -1
#endif