CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #6403 from thinkyhead/rc_flsun_clean

Browse Source 
FLSUN and trailing whitespace cleanup
This commit is contained in:
Scott Lahteine 2017-04-20 20:48:41 -05:00 committed by GitHub
commit c73b62447c
10 changed files with 16 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
View File

@ -446,8 +446,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 160
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm
@ -470,7 +468,6 @@
#define DELTA_PRINTABLE_RADIUS 90.0
// Delta calibration menu
// uncomment to add three points calibration menu option.
// See http://minow.blogspot.com/index.html#4918805519571907051
#define DELTA_CALIBRATION_MENU
@ -670,6 +667,9 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -728,7 +728,7 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED/10)
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75
@ -864,11 +864,11 @@
// @section machine
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true // DELTA does not invert
#define INVERT_X_DIR true
#define INVERT_Y_DIR true
#define INVERT_Z_DIR true
// Enable this option for Toshiba steppers
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder
@ -987,6 +987,7 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension.
#define GRID_MAX_POINTS_X 9
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
@ -1004,7 +1005,6 @@
//#define PROBE_Y_FIRST
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
@ -1401,7 +1401,6 @@
//
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
//
// INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics.
//#define INDIVIDUAL_AXIS_HOMING_MENU
//

3
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -446,8 +446,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 160
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm
@ -1403,7 +1401,6 @@
//
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
//
// INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics.
//#define INDIVIDUAL_AXIS_HOMING_MENU
//

3
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -436,8 +436,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 250.0 // mm
@ -701,7 +699,6 @@
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
* Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

2
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -436,8 +436,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 215.0 // mm

2
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -423,8 +423,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 160
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 301.0 // mm

2
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -441,8 +441,6 @@
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 160
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 317.3 + 2.5 // mm

2
Marlin/ultralcd.cpp
View File

@ -194,7 +194,7 @@ uint16_t max_display_update_time = 0;
DECLARE_MENU_EDIT_TYPE(float, float52);
DECLARE_MENU_EDIT_TYPE(float, float62);
DECLARE_MENU_EDIT_TYPE(unsigned long, long5);
void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
void menu_action_setting_edit_accessor_bool(const char* pstr, bool (*pget)(), void (*pset)(bool));

10
buildroot/share/cmake/CMakeLists.txt
View File

@ -14,7 +14,7 @@ cmake_minimum_required(VERSION 2.8)
# cmake -G"Unix Makefiles" .. #
# make #
#====================================================================#
#====================================================================#
# Download marlin-cmake scriptfiles if not already installed #
# and add the path to the module path #
@ -26,13 +26,13 @@ if(NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake)
file(DOWNLOAD https://github.com/tohara/marlin-cmake/archive/${SCRIPT_BRANCH}.tar.gz
${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz SHOW_PROGRESS)
execute_process(COMMAND ${CMAKE_COMMAND} -E tar -xvf ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR})
file(RENAME ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-${SCRIPT_BRANCH} ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake)
file(REMOVE ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz)
endif()
if(WIN32 AND NOT EXISTS ${CMAKE_BINARY_DIR}/make.exe)

2
buildroot/share/scripts/MarlinMesh.scad
View File

@ -115,7 +115,7 @@ module point_markers(show_home=true) {
$fn=8;
rotate([90,0])
text(str(z), 6, label_font_lg, halign="center", valign="center");
translate([0,0,down?-6:6]) rotate([90,0])
text(str(down ? "" : "+", v), 3, label_font_sm, halign="center", valign="center");
}

4
buildroot/share/scripts/createSpeedLookupTable.py
View File

@ -30,7 +30,7 @@ for i in range(32):
print " ",
for j in range(8):
print "{%d, %d}," % (a[8*i+j], b[8*i+j]),
print
print
print "};"
print
@ -42,7 +42,7 @@ for i in range(32):
print " ",
for j in range(8):
print "{%d, %d}," % (a[8*i+j], b[8*i+j]),
print
print
print "};"
print