Merge pull request #172 from daid/Marlin_v1

Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
2012-06-02 03:44:03 -07:00 · 2012-06-02 03:44:03 -07:00 · c7ce99d495
commit c7ce99d495
parent b7fc14bc65 e9bec9b6fe
7 changed files with 67 additions and 13 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -109,6 +109,9 @@
 //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
 //can be software-disabled for whatever purposes by
 #define PREVENT_DANGEROUS_EXTRUDE
+//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
+#define PREVENT_LENGTHY_EXTRUDE
+
 #define EXTRUDE_MINTEMP 170
 #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.

--- a/Marlin/Marlin.pde
+++ b/Marlin/Marlin.pde
@ -56,6 +56,8 @@
 // G92 - Set current position to cordinates given

 //RepRap M Codes
+// M0   - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
+// M1   - Same as M0
 // M104 - Set extruder target temp
 // M105 - Read current temp
 // M106 - Fan on
@ -596,6 +598,7 @@ void process_commands()
      while(millis()  < codenum ){
        manage_heater();
        manage_inactivity(1);
+		LCD_STATUS;
      }
      break;
    case 28: //G28 Home all Axis one at a time
@ -707,6 +710,35 @@ void process_commands()
  {
    switch( (int)code_value() ) 
    {
+#ifdef ULTRA_LCD
+    case 0: // M0 - Unconditional stop - Wait for user button press on LCD
+    case 1: // M1 - Conditional stop - Wait for user button press on LCD
+    {
+      LCD_MESSAGEPGM(MSG_USERWAIT);
+      codenum = 0;
+      if(code_seen('P')) codenum = code_value(); // milliseconds to wait
+      if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
+      
+      st_synchronize();
+      previous_millis_cmd = millis();
+	  if (codenum > 0)
+	  {
+        codenum += millis();  // keep track of when we started waiting
+        while(millis()  < codenum && !CLICKED){
+          manage_heater();
+          manage_inactivity(1);
+		  LCD_STATUS;
+		}
+      }else{
+        while(!CLICKED) {
+          manage_heater();
+          manage_inactivity(1);
+		  LCD_STATUS;
+		}
+	  }
+    }
+    break;
+#endif
    case 17:
        LCD_MESSAGEPGM(MSG_NO_MOVE);
        enable_x(); 
@ -1259,7 +1291,7 @@ void process_commands()
      PID_autotune(temp);
    }
    break;
-    case 400: // finish all moves
+    case 400: // M400 finish all moves
    {
      st_synchronize();
    }
--- a/Marlin/language.h
+++ b/Marlin/language.h
@ -10,11 +10,23 @@

 #define LANGUAGE_CHOICE 1  // Pick your language from the list above

+#define PROTOCOL_VERSION "1.0"
+
+#if MOTHERBOARD == 7 || MOTHERBOARD == 71
+	#define MACHINE_NAME "Ultimaker"
+	#define FIRMWARE_URL "http://firmware.ultimaker.com"
+#else
+	#define MACHINE_NAME "Mendel"
+	#define FIRMWARE_URL "http://www.mendel-parts.com"
+#endif
+
+#define STRINGIFY_(n) #n
+#define STRINGIFY(n) STRINGIFY_(n)
+
 #if LANGUAGE_CHOICE == 1

 // LCD Menu Messages
-
-	#define WELCOME_MSG "Printer Ready."
+	#define WELCOME_MSG MACHINE_NAME " Ready."
 	#define MSG_SD_INSERTED "Card inserted"
 	#define MSG_SD_REMOVED "Card removed"
 	#define MSG_MAIN " Main \003"
@ -63,8 +75,8 @@
 	#define MSG_MAIN_WIDE " Main        \003"
 	#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
 	#define MSG_MOTION_WIDE " Motion      \x7E"
-	#define MSG_STORE_EPROM " Store EPROM"
-	#define MSG_LOAD_EPROM " Load EPROM"
+	#define MSG_STORE_EPROM " Store memory"
+	#define MSG_LOAD_EPROM " Load memory"
 	#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
 	#define MSG_REFRESH "\004Refresh"
 	#define MSG_WATCH " Watch   \003"
@ -76,7 +88,8 @@
 	#define MSG_CARD_MENU " Card Menu    \x7E"
 	#define MSG_NO_CARD " No Card"
 	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
-	#define MSG_DWELL "DWELL..."		
+	#define MSG_DWELL "Sleep..."
+	#define MSG_USERWAIT "Wait for user..."
 	#define MSG_NO_MOVE "No move."
 	#define MSG_PART_RELEASE "Partial Release"
 	#define MSG_KILLED "KILLED. "
@ -94,7 +107,7 @@
 	#define MSG_BROWNOUT_RESET " Brown out Reset"
 	#define MSG_WATCHDOG_RESET " Watchdog Reset"
 	#define MSG_SOFTWARE_RESET " Software Reset"
-	#define MSG_MARLIN "Marlin: "
+	#define MSG_MARLIN "Marlin "
 	#define MSG_AUTHOR " | Author: "
 	#define MSG_CONFIGURATION_VER " Last Updated: "
 	#define MSG_FREE_MEMORY " Free Memory: "
@ -116,7 +129,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
 	#define MSG_COUNT_X " Count X:"
 	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
 	#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
@ -157,7 +170,7 @@

 // LCD Menu Messages

-	#define WELCOME_MSG "UltiMARLIN Ready."
+	#define WELCOME_MSG MACHINE_NAME " Ready."

 	#define MSG_SD_INSERTED "Card inserted"
 	#define MSG_SD_REMOVED "Card removed"
@ -263,7 +276,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
 	#define MSG_COUNT_X " Count X:"
 	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
 	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@ -684,7 +684,7 @@

 #define E1_STEP_PIN         49
 #define E1_DIR_PIN          47
-#define E1_ENABLE_PIN       51
+#define E1_ENABLE_PIN       48

 #define SDPOWER            -1
 #define SDSS               53
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@ -495,6 +495,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
      SERIAL_ECHO_START;
      SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
    }
+    #ifdef PREVENT_LENGTHY_EXTRUDE
    if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
    {
      position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
@ -502,6 +503,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
      SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
    }
    #endif
+  #endif
  
  // Prepare to set up new block
  block_t *block = &block_buffer[block_buffer_head];
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@ -13,6 +13,7 @@
  #define LCD_UPDATE_INTERVAL 100
  #define STATUSTIMEOUT 15000
  extern LiquidCrystal lcd;
+  extern volatile char buttons;  //the last checked buttons in a bit array.
  
  #ifdef NEWPANEL
    #define EN_C (1<<BLEN_C)
--- a/Marlin/ultralcd.pde
+++ b/Marlin/ultralcd.pde
@ -1,3 +1,5 @@
+#include "language.h"
+#include "temperature.h"
 #include "ultralcd.h"
 #ifdef ULTRA_LCD
 #include "Marlin.h"
@ -711,6 +713,7 @@ void MainMenu::showAxisMove()
          }
          break;
          case ItemAM_E:
+          // ErikDB: TODO: this length should be changed for volumetric.
          MENUITEM(  lcdprintPGM(MSG_EXTRUDE)  ,  BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ;
          break;
          default: