Gantry: Enable Filament Change (#15122)
This commit is contained in:
parent
8778e12342
commit
c8e096785f
@ -1463,12 +1463,12 @@
|
|||||||
* P1 Raise the nozzle always to Z-park height.
|
* P1 Raise the nozzle always to Z-park height.
|
||||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||||
*/
|
*/
|
||||||
//#define NOZZLE_PARK_FEATURE
|
#define NOZZLE_PARK_FEATURE
|
||||||
|
|
||||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||||
// Specify a park position as { X, Y, Z_raise }
|
// Specify a park position as { X, Y, Z_raise }
|
||||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
#define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -1555,14 +1555,14 @@
|
|||||||
* Requires NOZZLE_PARK_FEATURE.
|
* Requires NOZZLE_PARK_FEATURE.
|
||||||
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
||||||
*/
|
*/
|
||||||
//#define ADVANCED_PAUSE_FEATURE
|
#define ADVANCED_PAUSE_FEATURE
|
||||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||||
// This short retract is done immediately, before parking the nozzle.
|
// This short retract is done immediately, before parking the nozzle.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload.
|
||||||
// For Bowden, the full length of the tube and nozzle.
|
// For Bowden, the full length of the tube and nozzle.
|
||||||
// For direct drive, the full length of the nozzle.
|
// For direct drive, the full length of the nozzle.
|
||||||
// Set to 0 for manual unloading.
|
// Set to 0 for manual unloading.
|
||||||
|
@ -1463,12 +1463,12 @@
|
|||||||
* P1 Raise the nozzle always to Z-park height.
|
* P1 Raise the nozzle always to Z-park height.
|
||||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||||
*/
|
*/
|
||||||
//#define NOZZLE_PARK_FEATURE
|
#define NOZZLE_PARK_FEATURE
|
||||||
|
|
||||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||||
// Specify a park position as { X, Y, Z_raise }
|
// Specify a park position as { X, Y, Z_raise }
|
||||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
#define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -1555,14 +1555,14 @@
|
|||||||
* Requires NOZZLE_PARK_FEATURE.
|
* Requires NOZZLE_PARK_FEATURE.
|
||||||
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
||||||
*/
|
*/
|
||||||
//#define ADVANCED_PAUSE_FEATURE
|
#define ADVANCED_PAUSE_FEATURE
|
||||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||||
// This short retract is done immediately, before parking the nozzle.
|
// This short retract is done immediately, before parking the nozzle.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload.
|
||||||
// For Bowden, the full length of the tube and nozzle.
|
// For Bowden, the full length of the tube and nozzle.
|
||||||
// For direct drive, the full length of the nozzle.
|
// For direct drive, the full length of the nozzle.
|
||||||
// Set to 0 for manual unloading.
|
// Set to 0 for manual unloading.
|
||||||
|
Loading…
Reference in New Issue
Block a user