From cd85fa3abecd1a24de0fdbdb21a0ed2a2074af91 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Fri, 11 Sep 2020 23:05:27 -0500
Subject: [PATCH] Better choice of code

Followup to #19344
---
 .../gcode/calibrate/{G76_M871-M872.cpp => G76_M192_M871.cpp}  | 4 ++--
 Marlin/src/gcode/gcode.cpp                                    | 2 +-
 Marlin/src/gcode/gcode.h                                      | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
 rename Marlin/src/gcode/calibrate/{G76_M871-M872.cpp => G76_M192_M871.cpp} (99%)

diff --git a/Marlin/src/gcode/calibrate/G76_M871-M872.cpp b/Marlin/src/gcode/calibrate/G76_M192_M871.cpp
similarity index 99%
rename from Marlin/src/gcode/calibrate/G76_M871-M872.cpp
rename to Marlin/src/gcode/calibrate/G76_M192_M871.cpp
index 4f7c2874b..89393b458 100644
--- a/Marlin/src/gcode/calibrate/G76_M871-M872.cpp
+++ b/Marlin/src/gcode/calibrate/G76_M192_M871.cpp
@@ -334,13 +334,13 @@ void GcodeSuite::M871() {
 }
 
 /**
- * M872: Wait for probe temperature sensor to reach a target
+ * M192: Wait for probe temperature sensor to reach a target
  *
  * Select only one of these flags:
  *    R - Wait for heating or cooling
  *    S - Wait only for heating
  */
-void GcodeSuite::M872() {
+void GcodeSuite::M192() {
   if (DEBUGGING(DRYRUN)) return;
 
   const bool no_wait_for_cooling = parser.seenval('S');
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index bace7adc7..c1b6deead 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -818,8 +818,8 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
       #endif
 
       #if ENABLED(PROBE_TEMP_COMPENSATION)
+        case 192: M192(); break;                                  // M192: Wait for probe temp
         case 871: M871(); break;                                  // M871: Print/reset/clear first layer temperature offset values
-        case 872: M872(); break;                                  // M872: Wait for probe temp
       #endif
 
       #if ENABLED(LIN_ADVANCE)
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 72a2d0966..242730126 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -253,7 +253,7 @@
  * M868 - Report or set position encoder module error correction threshold.
  * M869 - Report position encoder module error.
  * M871 - Print/reset/clear first layer temperature offset values. (Requires PROBE_TEMP_COMPENSATION)
- * M872 - Wait for probe temp (Requires PROBE_TEMP_COMPENSATION)
+ * M192 - Wait for probe temp (Requires PROBE_TEMP_COMPENSATION)
  * M876 - Handle Prompt Response. (Requires HOST_PROMPT_SUPPORT and not EMERGENCY_PARSER)
  * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
  * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
@@ -822,8 +822,8 @@ private:
   #endif
 
   #if ENABLED(PROBE_TEMP_COMPENSATION)
+    static void M192();
     static void M871();
-    static void M872();
   #endif
 
   TERN_(LIN_ADVANCE, static void M900());