diff --git a/Marlin/language.h b/Marlin/language.h
index 697431d81..d17f6f667 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -1,1467 +1,1465 @@
-
-
-#ifndef LANGUAGE_H
-#define LANGUAGE_H
-
-// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
-//
-// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
-// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
-
-// Languages
-// 1 English
-// 2 Polish
-// 3 French (awaiting translation!)
-// 4 German
-// 5 Spanish
-// 6 Russian
-// 7 Italian
-// 8 Portuguese
-// 9 Finnish
-
-#ifndef LANGUAGE_CHOICE
-#define LANGUAGE_CHOICE 1 // Pick your language from the list above
-#endif
-
-#define PROTOCOL_VERSION "1.0"
-
-#if MOTHERBOARD == 7 || MOTHERBOARD == 71
- #define MACHINE_NAME "Ultimaker"
- #define FIRMWARE_URL "http://firmware.ultimaker.com"
-#else
- #define MACHINE_NAME "Mendel"
- #define FIRMWARE_URL "http://www.mendel-parts.com"
-#endif
-
-#define STRINGIFY_(n) #n
-#define STRINGIFY(n) STRINGIFY_(n)
-
-#if LANGUAGE_CHOICE == 1
-
-// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Ready."
- #define MSG_SD_INSERTED "Card inserted"
- #define MSG_SD_REMOVED "Card removed"
- #define MSG_MAIN "Main"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Disable Steppers"
- #define MSG_AUTO_HOME "Auto Home"
- #define MSG_SET_ORIGIN "Set Origin"
- #define MSG_PREHEAT_PLA "Preheat PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
- #define MSG_PREHEAT_ABS "Preheat ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
- #define MSG_COOLDOWN "Cooldown"
- #define MSG_EXTRUDE "Extrude"
- #define MSG_RETRACT "Retract"
- #define MSG_MOVE_AXIS "Move Axis"
- #define MSG_SPEED "Speed"
- #define MSG_NOZZLE "Nozzle"
- #define MSG_NOZZLE1 "Nozzle2"
- #define MSG_NOZZLE2 "Nozzle3"
- #define MSG_BED "Bed"
- #define MSG_FAN_SPEED "Fan speed"
- #define MSG_FLOW "Flow"
- #define MSG_CONTROL "Control"
- #define MSG_MIN " \002 Min"
- #define MSG_MAX " \002 Max"
- #define MSG_FACTOR " \002 Fact"
- #define MSG_AUTOTEMP "Autotemp"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Accel"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VMAX "Vmax "
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "VTrav min"
- #define MSG_AMAX "Amax "
- #define MSG_A_RETRACT "A-retract"
- #define MSG_XSTEPS "Xsteps/mm"
- #define MSG_YSTEPS "Ysteps/mm"
- #define MSG_ZSTEPS "Zsteps/mm"
- #define MSG_ESTEPS "Esteps/mm"
- #define MSG_RECTRACT "Rectract"
- #define MSG_TEMPERATURE "Temperature"
- #define MSG_MOTION "Motion"
- #define MSG_STORE_EPROM "Store memory"
- #define MSG_LOAD_EPROM "Load memory"
- #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
- #define MSG_REFRESH "Refresh"
- #define MSG_WATCH "Watch"
- #define MSG_PREPARE "Prepare"
- #define MSG_TUNE "Tune"
- #define MSG_PAUSE_PRINT "Pause Print"
- #define MSG_RESUME_PRINT "Resume Print"
- #define MSG_STOP_PRINT "Stop Print"
- #define MSG_CARD_MENU "Card Menu"
- #define MSG_NO_CARD "No Card"
- #define MSG_DWELL "Sleep..."
- #define MSG_USERWAIT "Wait for user..."
- #define MSG_RESUMING "Resuming print"
- #define MSG_NO_MOVE "No move."
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_CONTROL_RETRACT "Retract mm"
- #define MSG_CONTROL_RETRACTF "Retract F"
- #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
- #define MSG_AUTORETRACT "AutoRetr."
- #define MSG_FILAMENTCHANGE "Change filament"
- #define MSG_INIT_SDCARD "Init. SD-Card"
- #define MSG_CNG_SDCARD "Change SD-Card"
-
-// Serial Console Messages
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_EXTERNAL_RESET " External Reset"
- #define MSG_BROWNOUT_RESET " Brown out Reset"
- #define MSG_WATCHDOG_RESET " Watchdog Reset"
- #define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Last Updated: "
- #define MSG_FREE_MEMORY " Free Memory: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Done saving file."
- #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
- #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
- #define MSG_FILE_PRINTED "Done printing file"
- #define MSG_BEGIN_FILE_LIST "Begin file list"
- #define MSG_END_FILE_LIST "End file list"
- #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
- #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
- #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- #define MSG_HEATING "Heating..."
- #define MSG_HEATING_COMPLETE "Heating done."
- #define MSG_BED_HEATING "Bed Heating."
- #define MSG_BED_DONE "Bed done."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Count X: "
- #define MSG_ERR_KILLED "Printer halted. kill() called!"
- #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
- #define MSG_RESEND "Resend: "
- #define MSG_UNKNOWN_COMMAND "Unknown command: \""
- #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
- #define MSG_INVALID_EXTRUDER "Invalid extruder"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Reporting endstop status"
- #define MSG_ENDSTOP_HIT "TRIGGERED"
- #define MSG_ENDSTOP_OPEN "open"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- #define MSG_SD_INIT_FAIL "SD init fail"
- #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- #define MSG_SD_OPENROOT_FAIL "openRoot failed"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open failed"
- #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- #define MSG_SD_FILE_OPENED "File opened: "
- #define MSG_SD_SIZE " Size: "
- #define MSG_SD_FILE_SELECTED "File selected"
- #define MSG_SD_WRITE_TO_FILE "Writing to file: "
- #define MSG_SD_PRINTING_BYTE "SD printing byte "
- #define MSG_SD_NOT_PRINTING "Not SD printing"
- #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
-
- #define MSG_STEPPER_TO_HIGH "Steprate to high: "
- #define MSG_ENDSTOPS_HIT "endstops hit: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 2
-
-// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Gotowe."
- #define MSG_SD_INSERTED "Karta wlozona"
- #define MSG_SD_REMOVED "Karta usunieta"
- #define MSG_MAIN "Main"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Wylacz silniki"
- #define MSG_AUTO_HOME "Auto. poz. zerowa"
- #define MSG_SET_ORIGIN "Ustaw punkt zerowy"
- #define MSG_PREHEAT_PLA "Rozgrzej PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
- #define MSG_PREHEAT_ABS "Rozgrzej ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
- #define MSG_COOLDOWN "Chlodzenie"
- #define MSG_EXTRUDE "Ekstruzja"
- #define MSG_RETRACT "Cofanie"
- #define MSG_MOVE_AXIS "Ruch osi"
- #define MSG_SPEED "Predkosc"
- #define MSG_NOZZLE "Dysza"
- #define MSG_NOZZLE1 "Dysza2"
- #define MSG_NOZZLE2 "Dysza3"
- #define MSG_BED "Loze"
- #define MSG_FAN_SPEED "Obroty wiatraka"
- #define MSG_FLOW "Przeplyw"
- #define MSG_CONTROL "Kontrola"
- #define MSG_MIN " \002 Min"
- #define MSG_MAX " \002 Max"
- #define MSG_FACTOR " \002 Mnoznik"
- #define MSG_AUTOTEMP "Auto. temp."
- #define MSG_ON "Wl. "
- #define MSG_OFF "Wyl."
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Acc"
- #define MSG_VXY_JERK "Zryw Vxy"
- #define MSG_VMAX "Vmax"
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "Vskok min"
- #define MSG_AMAX "Amax"
- #define MSG_A_RETRACT "A-wycofanie"
- #define MSG_XSTEPS "krokiX/mm"
- #define MSG_YSTEPS "krokiY/mm"
- #define MSG_ZSTEPS "krokiZ/mm"
- #define MSG_ESTEPS "krokiE/mm"
- #define MSG_RECTRACT "Wycofanie"
- #define MSG_TEMPERATURE "Temperatura"
- #define MSG_MOTION "Ruch"
- #define MSG_STORE_EPROM "Zapisz w pamieci"
- #define MSG_LOAD_EPROM "Wczytaj z pamieci"
- #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
- #define MSG_REFRESH "\004Odswiez"
- #define MSG_WATCH "Obserwuj"
- #define MSG_PREPARE "Przygotuj"
- #define MSG_CONTROL "Kontroluj"
- #define MSG_TUNE "Strojenie"
- #define MSG_PAUSE_PRINT "Pauza"
- #define MSG_RESUME_PRINT "Wznowienie"
- #define MSG_STOP_PRINT "Stop"
- #define MSG_CARD_MENU "Menu SDCard"
- #define MSG_NO_CARD "Brak karty"
- #define MSG_DWELL "Uspij..."
- #define MSG_USERWAIT "Czekaj na uzytkownika..."
- #define MSG_RESUMING "Wznawiam drukowanie"
- #define MSG_NO_MOVE "Brak ruchu."
- #define MSG_PART_RELEASE "Czesciowe zwolnienie"
- #define MSG_KILLED "Ubity. "
- #define MSG_STOPPED "Zatrzymany. "
- #define MSG_STEPPER_RELEASED "Zwolniony."
- #define MSG_CONTROL_RETRACT "Wycofaj mm"
- #define MSG_CONTROL_RETRACTF "Wycofaj F"
- #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
- #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
- #define MSG_AUTORETRACT "Auto. wycofanie"
- #define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
- #define MSG_Enqueing "Kolejkowanie \""
- #define MSG_POWERUP "Zasilanie wlaczone"
- #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
- #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
- #define MSG_WATCHDOG_RESET " Reset (watchdog)"
- #define MSG_SOFTWARE_RESET " Reset (programowy)"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Autor: "
- #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
- #define MSG_FREE_MEMORY " Wolna pamiec: "
- #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Plik zapisany."
- #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
- #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
- #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
- #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
- #define MSG_BEGIN_FILE_LIST "Start listy plikow"
- #define MSG_END_FILE_LIST "Koniec listy plikow"
- #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
- #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
- #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
- #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
- #define MSG_HEATING "Nagrzewanie ekstrudera..."
- #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
- #define MSG_BED_HEATING "Nagrzewanie loza..."
- #define MSG_BED_DONE "Nagrzewanie loza zakonczone."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Liczenie X: "
- #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
- #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
- #define MSG_RESEND "Wyslij ponownie: "
- #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
- #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
- #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
- #define MSG_ENDSTOP_HIT "WYZWOLONY"
- #define MSG_ENDSTOP_OPEN "otwarty"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
- #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
- #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
- #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
- #define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
- #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
- #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
- #define MSG_SD_FILE_OPENED "Otwarto plik:"
- #define MSG_SD_SIZE " Rozmiar:"
- #define MSG_SD_FILE_SELECTED "Wybrano plik"
- #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
- #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
- #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
- #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
- #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
-
- #define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
- #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
- #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 3
-
-#define WELCOME_MSG MACHINE_NAME " Pret."
-#define MSG_SD_INSERTED "Carte inseree"
-#define MSG_SD_REMOVED "Carte retiree"
-#define MSG_MAIN " Principal \003"
-#define MSG_AUTOSTART " Demarrage auto."
-#define MSG_DISABLE_STEPPERS " Desactiver moteurs"
-#define MSG_AUTO_HOME " Home auto."
-#define MSG_SET_ORIGIN " Regler origine"
-#define MSG_PREHEAT_PLA " Prechauffage PLA"
-#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
-#define MSG_PREHEAT_ABS " Prechauffage ABS"
-#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
-#define MSG_COOLDOWN " Refroidissement"
-#define MSG_EXTRUDE " Extrusion"
-#define MSG_RETRACT " Retractation"
-#define MSG_PREHEAT_PLA " Prechauffage PLA"
-#define MSG_PREHEAT_ABS " Prechauffage ABS"
-#define MSG_MOVE_AXIS " Deplacer axe \x7E"
-#define MSG_SPEED " Vitesse:"
-#define MSG_NOZZLE " \002Buse:"
-#define MSG_NOZZLE1 " \002Buse2:"
-#define MSG_NOZZLE2 " \002Buse3:"
-#define MSG_BED " \002Lit:"
-#define MSG_FAN_SPEED " Vitesse ventilateur:"
-#define MSG_FLOW " Flux:"
-#define MSG_CONTROL " Controle \003"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Facteur:"
-#define MSG_AUTOTEMP " Temp. Auto.:"
-#define MSG_ON "Marche "
-#define MSG_OFF "Arret"
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC " Acc:"
-#define MSG_VXY_JERK " Vxy-jerk: "
-#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " Vdepl min:"
-#define MSG_AMAX " Amax "
-#define MSG_A_RETRACT " A-retract:"
-#define MSG_XSTEPS " Xpas/mm:"
-#define MSG_YSTEPS " Ypas/mm:"
-#define MSG_ZSTEPS " Zpas/mm:"
-#define MSG_ESTEPS " Epas/mm:"
-#define MSG_MAIN_WIDE " Principal \003"
-#define MSG_RECTRACT_WIDE " Rectractater \x7E"
-#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
-#define MSG_TEMPERATURE_RTN " Temperature \003"
-#define MSG_MOTION_WIDE " Mouvement \x7E"
-#define MSG_STORE_EPROM " Sauvegarder memoire"
-#define MSG_LOAD_EPROM " Lire memoire"
-#define MSG_RESTORE_FAILSAFE " Restaurer memoire"
-#define MSG_REFRESH "\004Actualiser"
-#define MSG_WATCH " Surveiller \003"
-#define MSG_PREPARE " Preparer \x7E"
-#define MSG_PREPARE_ALT " Prepare \003"
-#define MSG_CONTROL_ARROW " Controle \x7E"
-#define MSG_RETRACT_ARROW " Retracter \x7E"
-#define MSG_TUNE " Regler \x7E"
-#define MSG_PAUSE_PRINT " Pause impression \x7E"
-#define MSG_RESUME_PRINT " Reprendre impression \x7E"
-#define MSG_STOP_PRINT " Arreter impression \x7E"
-#define MSG_CARD_MENU " Menu carte \x7E"
-#define MSG_NO_CARD " Pas de carte"
-#define MSG_DWELL "Repos..."
-#define MSG_USERWAIT "Attente de l'utilisateur..."
-#define MSG_NO_MOVE "Aucun mouvement."
-#define MSG_PART_RELEASE "Relache partielle"
-#define MSG_KILLED "TUE."
-#define MSG_STOPPED "STOPPE."
-#define MSG_STEPPER_RELEASED "RELACHE."
-#define MSG_CONTROL_RETRACT " Retractation mm:"
-#define MSG_CONTROL_RETRACTF " Retractation F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
-#define MSG_AUTORETRACT " Retract. Auto.:"
-#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-#define MSG_Enqueing "Mise en tampon \""
-#define MSG_POWERUP "Allumage"
-#define MSG_EXTERNAL_RESET " RAZ Externe"
-#define MSG_BROWNOUT_RESET " RAZ defaut alim."
-#define MSG_WATCHDOG_RESET " RAZ Watchdog"
-#define MSG_SOFTWARE_RESET " RAZ logicielle"
-#define MSG_MARLIN "Marlin "
-#define MSG_AUTHOR " | Auteur: "
-#define MSG_CONFIGURATION_VER " Derniere MaJ: "
-#define MSG_FREE_MEMORY " Memoire libre: "
-#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
-#define MSG_OK "ok"
-#define MSG_FILE_SAVED "Fichier enregistre."
-#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
-#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
-#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
-#define MSG_FILE_PRINTED "Impression terminee"
-#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
-#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
-#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
-#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
-#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
-#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
-#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
-#define MSG_HEATING "En chauffe..."
-#define MSG_HEATING_COMPLETE "Chauffe terminee."
-#define MSG_BED_HEATING "Chauffe du lit."
-#define MSG_BED_DONE "Chauffe du lit terminee."
-#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X " Compteur X: "
-#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
-#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
-#define MSG_RESEND "Renvoie: "
-#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
-#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
-#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
-#define MSG_X_MIN "x_min: "
-#define MSG_X_MAX "x_max: "
-#define MSG_Y_MIN "y_min: "
-#define MSG_Y_MAX "y_max: "
-#define MSG_Z_MIN "z_min: "
-#define MSG_Z_MAX "z_max: "
-#define MSG_M119_REPORT "Affichage du status des fin de course"
-#define MSG_ENDSTOP_HIT "DECLENCHE"
-#define MSG_ENDSTOP_OPEN "OUVERT"
-#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
-#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
-#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
-#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
-#define MSG_SD_CARD_OK "Carte SD Ok"
-#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
-#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
-#define MSG_SD_FILE_OPENED "Fichier ouvert: "
-#define MSG_SD_SIZE " Taille: "
-#define MSG_SD_FILE_SELECTED "Fichier selectionne"
-#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
-#define MSG_SD_PRINTING_BYTE "Octet impression SD "
-#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
-#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
-#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
-
-#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
-#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
-#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
-#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 4
-
-// LCD Menu Messages
-
- #define WELCOME_MSG MACHINE_NAME " Bereit."
-
- #define MSG_SD_INSERTED "SDKarte erkannt"
- #define MSG_SD_REMOVED "SDKarte entfernt"
- #define MSG_MAIN "Hauptmneü"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Stepper abschalten"
- #define MSG_AUTO_HOME "Auto Nullpunkt"
- #define MSG_SET_ORIGIN "Setze Nullpunkt"
- #define MSG_PREHEAT_PLA "Vorwärmen PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
- #define MSG_PREHEAT_ABS "Vorwärmen ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
- #define MSG_COOLDOWN "Abkühlen"
- #define MSG_EXTRUDE "Extrude"
- #define MSG_RETRACT "Retract"
- #define MSG_MOVE_AXIS "Achsen bewegen"
- #define MSG_SPEED "Geschw"
- #define MSG_NOZZLE "Düse"
- #define MSG_NOZZLE1 "Düse2"
- #define MSG_NOZZLE2 "Düse3"
- #define MSG_BED "Bett"
- #define MSG_FAN_SPEED "Lüftergeschw."
- #define MSG_FLOW "Fluß"
- #define MSG_CONTROL "Einstellungen"
- #define MSG_MIN "\002 Min"
- #define MSG_MAX "\002 Max"
- #define MSG_FACTOR "\002 Faktor"
- #define MSG_AUTOTEMP "AutoTemp"
- #define MSG_ON "Ein"
- #define MSG_OFF "Aus"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Acc"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VMAX "Vmax "
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "VTrav min"
- #define MSG_AMAX "Amax "
- #define MSG_A_RETRACT "A-Retract"
- #define MSG_XSTEPS "Xsteps/mm"
- #define MSG_YSTEPS "Ysteps/mm"
- #define MSG_ZSTEPS "Zsteps/mm"
- #define MSG_ESTEPS "Esteps/mm"
- #define MSG_RECTRACT_WIDE "Rectract"
- #define MSG_WATCH "Beobachten"
- #define MSG_TEMPERATURE "Temperatur"
- #define MSG_MOTION "Bewegung"
- #define MSG_STORE_EPROM "EPROM speichern"
- #define MSG_LOAD_EPROM "EPROM laden"
- #define MSG_RESTORE_FAILSAFE "Standardkonfig."
- #define MSG_REFRESH "Aktualisieren"
- #define MSG_PREPARE "Vorbereitung"
- #define MSG_CONTROL "Einstellungen"
- #define MSG_TUNE "Justierung"
- #define MSG_PAUSE_PRINT "Druck anhalten"
- #define MSG_RESUME_PRINT "Druck fortsetz"
- #define MSG_STOP_PRINT "Druck stoppen"
- #define MSG_CARD_MENU "SDKarten Menü"
- #define MSG_NO_CARD "Keine SDKarte"
- #define MSG_DWELL "Warten..."
- #define MSG_USERWAIT "Warte auf Nutzer..."
- #define MSG_RESUMING "Druck fortsetzung"
- #define MSG_NO_MOVE "Kein Zug."
- #define MSG_PART_RELEASE "Stepper tlw frei"
- #define MSG_KILLED "KILLED"
- #define MSG_STOPPED "GESTOPPT"
- #define MSG_STEPPER_RELEASED "Stepper frei"
- #define MSG_CONTROL_RETRACT "Retract mm"
- #define MSG_CONTROL_RETRACTF "Retract F"
- #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
- #define MSG_AUTORETRACT "AutoRetr."
- #define MSG_FILAMENTCHANGE "Filament wechseln"
-
-// Serial Console Messages
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_EXTERNAL_RESET " External Reset"
- #define MSG_BROWNOUT_RESET " Brown out Reset"
- #define MSG_WATCHDOG_RESET " Watchdog Reset"
- #define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin: "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Last Updated: "
- #define MSG_FREE_MEMORY " Free Memory: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Done saving file."
- #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
- #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
- #define MSG_FILE_PRINTED "Done printing file"
- #define MSG_BEGIN_FILE_LIST "Begin file list"
- #define MSG_END_FILE_LIST "End file list"
- #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
- #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
- #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- #define MSG_HEATING "Heating..."
- #define MSG_HEATING_COMPLETE "Heating done."
- #define MSG_BED_HEATING "Bed Heating."
- #define MSG_BED_DONE "Bed done."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Count X:"
- #define MSG_ERR_KILLED "Printer halted. kill() called !!"
- #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
- #define MSG_RESEND "Resend:"
- #define MSG_UNKNOWN_COMMAND "Unknown command:\""
- #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
- #define MSG_INVALID_EXTRUDER "Invalid extruder"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Reporting endstop status"
- #define MSG_ENDSTOP_HIT "TRIGGERED"
- #define MSG_ENDSTOP_OPEN "open"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- #define MSG_SD_INIT_FAIL "SD init fail"
- #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- #define MSG_SD_OPENROOT_FAIL "openRoot failed"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open failed"
- #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- #define MSG_SD_FILE_OPENED "File opened:"
- #define MSG_SD_SIZE " Size:"
- #define MSG_SD_FILE_SELECTED "File selected"
- #define MSG_SD_WRITE_TO_FILE "Writing to file: "
- #define MSG_SD_PRINTING_BYTE "SD printing byte "
- #define MSG_SD_NOT_PRINTING "Not SD printing"
- #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
-
- #define MSG_STEPPER_TO_HIGH "Steprate to high : "
- #define MSG_ENDSTOPS_HIT "endstops hit: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 5
-
-// LCD Menu Messages
-#define WELCOME_MSG MACHINE_NAME " Lista."
-#define MSG_SD_INSERTED "Tarjeta SD Colocada"
-#define MSG_SD_REMOVED "Tarjeta SD Retirada"
-#define MSG_MAIN " Menu Principal \003"
-#define MSG_AUTOSTART " Autostart"
-#define MSG_DISABLE_STEPPERS " Apagar Motores"
-#define MSG_AUTO_HOME " Llevar Ejes al Cero"
-#define MSG_SET_ORIGIN " Establecer Cero"
-#define MSG_COOLDOWN " Enfriar"
-#define MSG_EXTRUDE " Extruir"
-#define MSG_RETRACT " Retraer"
-#define MSG_PREHEAT_PLA " Precalentar PLA"
-#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
-#define MSG_PREHEAT_ABS " Precalentar ABS"
-#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
-#define MSG_MOVE_AXIS " Mover Ejes \x7E"
-#define MSG_SPEED " Velocidad:"
-#define MSG_NOZZLE " \002Nozzle:"
-#define MSG_NOZZLE1 " \002Nozzle2:"
-#define MSG_NOZZLE2 " \002Nozzle3:"
-#define MSG_BED " \002Base:"
-#define MSG_FAN_SPEED " Ventilador:"
-#define MSG_FLOW " Flujo:"
-#define MSG_CONTROL " Control \003"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Fact:"
-#define MSG_AUTOTEMP " Autotemp:"
-#define MSG_ON "On "
-#define MSG_OFF "Off"
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC " Acc:"
-#define MSG_VXY_JERK " Vxy-jerk: "
-#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " VTrav min:"
-#define MSG_AMAX " Amax "
-#define MSG_A_RETRACT " A-retrac.:"
-#define MSG_XSTEPS " Xpasos/mm:"
-#define MSG_YSTEPS " Ypasos/mm:"
-#define MSG_ZSTEPS " Zpasos/mm:"
-#define MSG_ESTEPS " Epasos/mm:"
-#define MSG_MAIN_WIDE " Menu Principal \003"
-#define MSG_RECTRACT_WIDE " Retraer \x7E"
-#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
-#define MSG_TEMPERATURE_RTN " Temperatura \003"
-#define MSG_MOTION_WIDE " Movimiento \x7E"
-#define MSG_STORE_EPROM " Guardar Memoria"
-#define MSG_LOAD_EPROM " Cargar Memoria"
-#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
-#define MSG_REFRESH "\004Volver a cargar"
-#define MSG_WATCH " Monitorizar \003"
-#define MSG_PREPARE " Preparar \x7E"
-#define MSG_PREPARE_ALT " Preparar \003"
-#define MSG_CONTROL_ARROW " Control \x7E"
-#define MSG_RETRACT_ARROW " Retraer \x7E"
-#define MSG_TUNE " Ajustar \x7E"
-#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
-#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
-#define MSG_STOP_PRINT " Detener Impresion \x7E"
-#define MSG_CARD_MENU " Menu de SD \x7E"
-#define MSG_NO_CARD " No hay Tarjeta SD"
-#define MSG_DWELL "Reposo..."
-#define MSG_USERWAIT "Esperando Ordenes..."
-#define MSG_NO_MOVE "Sin movimiento"
-#define MSG_PART_RELEASE "Desacople Parcial"
-#define MSG_KILLED "PARADA DE EMERGENCIA. "
-#define MSG_STOPPED "PARADA. "
-#define MSG_STEPPER_RELEASED "Desacoplada."
-#define MSG_CONTROL_RETRACT " Retraer mm:"
-#define MSG_CONTROL_RETRACTF " Retraer F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
-#define MSG_AUTORETRACT " AutoRetr.:"
-#define MSG_FILAMENTCHANGE "Change filament"
-// Serial Console Messages
-
-#define MSG_Enqueing "En cola \""
-#define MSG_POWERUP "PowerUp"
-#define MSG_EXTERNAL_RESET " Reset Externo"
-#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
-#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
-#define MSG_SOFTWARE_RESET " Reset por Software"
-#define MSG_MARLIN "Marlin "
-#define MSG_AUTHOR " | Autor: "
-#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
-#define MSG_FREE_MEMORY " Memoria libre: "
-#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
-#define MSG_OK "ok"
-#define MSG_FILE_SAVED "Guardado."
-#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
-#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
-#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
-#define MSG_FILE_PRINTED "Impresion terminada"
-#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
-#define MSG_END_FILE_LIST "Fin de la lista de archivos"
-#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
-#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
-#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
-#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
-#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
-#define MSG_HEATING "Calentando..."
-#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
-#define MSG_BED_HEATING "Calentando la base."
-#define MSG_BED_DONE "Base Caliente."
-#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X " Cuenta X:"
-#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
-#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
-#define MSG_RESEND "Reenviar:"
-#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
-#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
-#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
-#define MSG_X_MIN "x_min: "
-#define MSG_X_MAX "x_max: "
-#define MSG_Y_MIN "y_min: "
-#define MSG_Y_MAX "y_max: "
-#define MSG_Z_MIN "z_min: "
-#define MSG_M119_REPORT "Comprobando fines de carrera."
-#define MSG_ENDSTOP_HIT "PULSADO"
-#define MSG_ENDSTOP_OPEN "abierto"
-#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
-#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
-#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
-#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
-#define MSG_SD_CARD_OK "Tarjeta SD OK"
-#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
-#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
-#define MSG_SD_FILE_OPENED "Archivo abierto:"
-#define MSG_SD_SIZE " Tamaño:"
-#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
-#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
-#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
-#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
-#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
-#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
-
-#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
-#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
-#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
-#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
-
-#endif
-
-#if LANGUAGE_CHOICE == 6
-
-// LCD Menu Messages
-#define WELCOME_MSG MACHINE_NAME " Готов"
-#define MSG_SD_INSERTED "Карта вставлена"
-#define MSG_SD_REMOVED "Карта извлечена"
-#define MSG_MAIN " Меню \003"
-#define MSG_AUTOSTART " Автостарт "
-#define MSG_DISABLE_STEPPERS " Выключить двигатели"
-#define MSG_AUTO_HOME " Парковка "
-#define MSG_SET_ORIGIN " Запомнить ноль "
-#define MSG_PREHEAT_PLA " Преднагрев PLA "
-#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
-#define MSG_PREHEAT_ABS " Преднагрев ABS "
-#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
-#define MSG_COOLDOWN " Охлаждение "
-#define MSG_EXTRUDE " Экструзия "
-#define MSG_RETRACT " Откат"
-#define MSG_MOVE_AXIS " Движение по осям \x7E"
-#define MSG_SPEED " Скорость:"
-#define MSG_NOZZLE " \002 Фильера:"
-#define MSG_NOZZLE1 " \002 Фильера2:"
-#define MSG_NOZZLE2 " \002 Фильера3:"
-#define MSG_BED " \002 Кровать:"
-#define MSG_FAN_SPEED " Куллер:"
-#define MSG_FLOW " Поток:"
-#define MSG_CONTROL " Настройки \003"
-#define MSG_MIN " \002 Минимум:"
-#define MSG_MAX " \002 Максимум:"
-#define MSG_FACTOR " \002 Фактор:"
-#define MSG_AUTOTEMP " Autotemp:"
-#define MSG_ON "Вкл. "
-#define MSG_OFF "Выкл. "
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC " Acc:"
-#define MSG_VXY_JERK " Vxy-jerk: "
-#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " VTrav min:"
-#define MSG_AMAX " Amax "
-#define MSG_A_RETRACT " A-retract:"
-#define MSG_XSTEPS " X шаг/mm:"
-#define MSG_YSTEPS " Y шаг/mm:"
-#define MSG_ZSTEPS " Z шаг/mm:"
-#define MSG_ESTEPS " E шаг/mm:"
-#define MSG_RECTRACT " Откат подачи \x7E"
-#define MSG_TEMPERATURE " Температура \x7E"
-#define MSG_MOTION " Скорости \x7E"
-#define MSG_STORE_EPROM " Сохранить настройки"
-#define MSG_LOAD_EPROM " Загрузить настройки"
-#define MSG_RESTORE_FAILSAFE " Сброс настроек "
-#define MSG_REFRESH "\004Обновить "
-#define MSG_WATCH " Обзор \003"
-#define MSG_PREPARE " Действия \x7E"
-#define MSG_TUNE " Настройки \x7E"
-#define MSG_PAUSE_PRINT " Пауза печати \x7E"
-#define MSG_RESUME_PRINT " Продолжить печать \x7E"
-#define MSG_STOP_PRINT " Остановить печать \x7E"
-#define MSG_CARD_MENU " Меню карты \x7E"
-#define MSG_NO_CARD " Нет карты"
-#define MSG_DWELL "Сон..."
-#define MSG_USERWAIT "Нажмите для продолж."
-#define MSG_NO_MOVE "Нет движения. "
-#define MSG_PART_RELEASE " Извлечение принта "
-#define MSG_KILLED "УБИТО. "
-#define MSG_STOPPED "ОСТАНОВЛЕНО. "
-#define MSG_CONTROL_RETRACT " Откат mm:"
-#define MSG_CONTROL_RETRACTF " Откат F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
-#define MSG_AUTORETRACT " АвтоОткат:"
-#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-#define MSG_Enqueing "Запланировано \""
-#define MSG_POWERUP "Включение питания"
-#define MSG_EXTERNAL_RESET " Внешний сброс"
-#define MSG_BROWNOUT_RESET " Brown out сброс"
-#define MSG_WATCHDOG_RESET " Watchdog сброс"
-#define MSG_SOFTWARE_RESET " программный сброс"
-#define MSG_MARLIN "Marlin "
-#define MSG_AUTHOR " | Автор: "
-#define MSG_CONFIGURATION_VER " Последнее обновление: "
-#define MSG_FREE_MEMORY " Памяти свободно: "
-#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
-#define MSG_OK "ok"
-#define MSG_FILE_SAVED "Файл записан."
-#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
-#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
-#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
-#define MSG_FILE_PRINTED "Печать файла завершена"
-#define MSG_BEGIN_FILE_LIST "Список файлов"
-#define MSG_END_FILE_LIST "Конец списка файлов"
-#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
-#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
-#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
-#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
-#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
-#define MSG_HEATING "Нагрев... "
-#define MSG_HEATING_COMPLETE "Наргето. "
-#define MSG_BED_HEATING "Нагрев стола... "
-#define MSG_BED_DONE "Стол нагрет. "
-#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X " Count X:"
-#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
-#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
-#define MSG_RESEND "Переотправка:"
-#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
-#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
-#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
-#define MSG_X_MIN "x_min:"
-#define MSG_X_MAX "x_max:"
-#define MSG_Y_MIN "y_min:"
-#define MSG_Y_MAX "y_max:"
-#define MSG_Z_MIN "z_min:"
-#define MSG_Z_MAX "z_max:"
-#define MSG_M119_REPORT "Статус концевиков"
-#define MSG_ENDSTOP_HIT "Срабатывание концевика"
-#define MSG_ENDSTOP_OPEN "Концевик освобожден"
-#define MSG_HOTEND_OFFSET "Hotend offsets:"
-#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
-#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
-#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
-#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
-#define MSG_SD_CARD_OK "SD карта в порядке"
-#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
-#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
-#define MSG_SD_FILE_OPENED "Файл открыт:"
-#define MSG_SD_SIZE " Размер:"
-#define MSG_SD_FILE_SELECTED "Файл выбран"
-#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
-#define MSG_SD_PRINTING_BYTE "SD печать byte "
-#define MSG_SD_NOT_PRINTING "нет SD печати"
-#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
-#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
-#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
-#define MSG_ENDSTOPS_HIT "концевик сработал: "
-#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
-#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 7
-
- // LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Pronto."
- #define MSG_SD_INSERTED "SD Card inserita"
- #define MSG_SD_REMOVED "SD Card rimossa"
- #define MSG_MAIN "Menu principale"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Disabilita Motori"
- #define MSG_AUTO_HOME "Auto Home"
- #define MSG_SET_ORIGIN "Imposta Origine"
- #define MSG_PREHEAT_PLA "Preriscalda PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
- #define MSG_PREHEAT_ABS "Preriscalda ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
- #define MSG_COOLDOWN "Rafredda"
- #define MSG_EXTRUDE "Estrudi"
- #define MSG_RETRACT "Ritrai"
- #define MSG_MOVE_AXIS "Muovi Asse"
- #define MSG_SPEED "Velcità"
- #define MSG_NOZZLE "Ugello"
- #define MSG_NOZZLE1 "Ugello2"
- #define MSG_NOZZLE2 "Ugello3"
- #define MSG_BED "Piatto"
- #define MSG_FAN_SPEED "Ventola"
- #define MSG_FLOW "Flusso"
- #define MSG_CONTROL "Controllo"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP "Autotemp"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Accel"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VMAX "Vmax"
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "VTrav min"
- #define MSG_AMAX "Amax"
- #define MSG_A_RETRACT "A-retract"
- #define MSG_XSTEPS "Xpassi/mm"
- #define MSG_YSTEPS "Ypassi/mm"
- #define MSG_ZSTEPS "Zpassi/mm"
- #define MSG_ESTEPS "Epassi/mm"
- #define MSG_RECTRACT "Ritrai"
- #define MSG_TEMPERATURE "Temperatura"
- #define MSG_MOTION "Movimento"
- #define MSG_STORE_EPROM "Salva in EEPROM"
- #define MSG_LOAD_EPROM "Carica da EEPROM"
- #define MSG_RESTORE_FAILSAFE "Impostaz. default"
- #define MSG_REFRESH "Aggiorna"
- #define MSG_WATCH "Guarda"
- #define MSG_PREPARE "Prepara"
- #define MSG_TUNE "Adatta"
- #define MSG_PAUSE_PRINT "Pausa"
- #define MSG_RESUME_PRINT "Riprendi Stampa"
- #define MSG_STOP_PRINT "Arresta Stampa"
- #define MSG_CARD_MENU "SD Card Menu"
- #define MSG_NO_CARD "No SD Card"
- #define MSG_DWELL "Sospensione..."
- #define MSG_USERWAIT "Attendi Utente..."
- #define MSG_RESUMING "Riprendi Stampa"
- #define MSG_NO_MOVE "Nessun Movimento."
- #define MSG_KILLED "UCCISO. "
- #define MSG_STOPPED "ARRESTATO. "
- #define MSG_CONTROL_RETRACT "Ritrai mm"
- #define MSG_CONTROL_RETRACTF "Ritrai F"
- #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
- #define MSG_AUTORETRACT "AutoArretramento"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
- #define MSG_FILAMENTCHANGE "Cambia filamento"
- #define MSG_INIT_SDCARD "Iniz. SD-Card"
- #define MSG_CNG_SDCARD "Cambia SD-Card"
-
- // Serial Console Messages
-
- #define MSG_Enqueing "accodamento \""
- #define MSG_POWERUP "Accensione"
- #define MSG_EXTERNAL_RESET " Reset Esterno"
- #define MSG_BROWNOUT_RESET " Brown out Reset"
- #define MSG_WATCHDOG_RESET " Watchdog Reset"
- #define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Autore: "
- #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
- #define MSG_FREE_MEMORY " Memoria Libera: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "File Salvato."
- #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
- #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
- #define MSG_FILE_PRINTED "File stampato"
- #define MSG_BEGIN_FILE_LIST "Inizio Lista File"
- #define MSG_END_FILE_LIST "Fine Lista File"
- #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
- #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
- #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
- #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
- #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
- #define MSG_HEATING "Riscaldamento..."
- #define MSG_HEATING_COMPLETE "Stampante Calda."
- #define MSG_BED_HEATING "Riscaldamento Piatto."
- #define MSG_BED_DONE "Piatto Pronto."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Calcola X: "
- #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
- #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
- #define MSG_RESEND "Reinviato:"
- #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
- #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
- #define MSG_INVALID_EXTRUDER "Estrusore non valido"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Segnalazione stato degli endstop"
- #define MSG_ENDSTOP_HIT "INNESCATO"
- #define MSG_ENDSTOP_OPEN "aperto"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
- #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
- #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
- #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
- #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
- #define MSG_SD_FILE_OPENED "File aperto: "
- #define MSG_SD_SIZE " Dimensione: "
- #define MSG_SD_FILE_SELECTED "File selezionato"
- #define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
- #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
- #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
- #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
-
- #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: "
- #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
- #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 8
-
-// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Pronta."
- #define MSG_SD_INSERTED "Cartao SD inserido"
- #define MSG_SD_REMOVED "Cartao SD removido"
- #define MSG_MAIN " Menu Principal \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Apagar Motores"
- #define MSG_AUTO_HOME " Ir para Origen"
- #define MSG_SET_ORIGIN " Estabelecer Origen"
- #define MSG_PREHEAT_PLA " pre-aquecer PLA"
- #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
- #define MSG_PREHEAT_ABS " pre-aquecer ABS"
- #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
- #define MSG_COOLDOWN " Esfriar"
- #define MSG_EXTRUDE " Extrudar"
- #define MSG_RETRACT " Retrair"
- #define MSG_PREHEAT_PLA " pre-aquecer PLA"
- #define MSG_PREHEAT_ABS " pre-aquecer ABS"
- #define MSG_MOVE_AXIS " Mover eixo \x7E"
- #define MSG_SPEED " Velocidade:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_NOZZLE1 " \002Nozzle2:"
- #define MSG_NOZZLE2 " \002Nozzle3:"
- #define MSG_BED " \002Base:"
- #define MSG_FAN_SPEED " Velocidade Ventoinha:"
- #define MSG_FLOW " Fluxo:"
- #define MSG_CONTROL " Controle \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xpasso/mm:"
- #define MSG_YSTEPS " Ypasso/mm:"
- #define MSG_ZSTEPS " Zpasso/mm:"
- #define MSG_ESTEPS " Epasso/mm:"
- #define MSG_MAIN_WIDE " Menu Principal \003"
- #define MSG_RECTRACT_WIDE " Retrair \x7E"
- #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
- #define MSG_TEMPERATURE_RTN " Temperatura \003"
- #define MSG_MOTION_WIDE " Movimento \x7E"
- #define MSG_STORE_EPROM " Guardar memoria"
- #define MSG_LOAD_EPROM " Carregar memoria"
- #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
- #define MSG_REFRESH "\004Recarregar"
- #define MSG_WATCH " Monitorar \003"
- #define MSG_PREPARE " Preparar \x7E"
- #define MSG_PREPARE_ALT " Preparar \003"
- #define MSG_CONTROL_ARROW " Controle \x7E"
- #define MSG_RETRACT_ARROW " Retrair \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
- #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
- #define MSG_STOP_PRINT " Parar Impressao \x7E"
- #define MSG_CARD_MENU " Menu cartao SD \x7E"
- #define MSG_NO_CARD " Sem cartao SD"
- #define MSG_DWELL "Repouso..."
- #define MSG_USERWAIT "Esperando Ordem..."
- #define MSG_NO_MOVE "Sem movimento."
- #define MSG_PART_RELEASE "Lancamento Parcial"
- #define MSG_KILLED "PARADA DE EMERGENCIA. "
- #define MSG_STOPPED "PARADA. "
- #define MSG_STEPPER_RELEASED "Lancado."
- #define MSG_CONTROL_RETRACT " Retrair mm:"
- #define MSG_CONTROL_RETRACTF " Retrair F:"
- #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
- #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
- #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
- #define MSG_AUTORETRACT " AutoRetr.:"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
- #define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_EXTERNAL_RESET " Reset Externo"
- #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
- #define MSG_WATCHDOG_RESET " Reset por Bloqueio"
- #define MSG_SOFTWARE_RESET " Reset por Software"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Ultima atualizacao: "
- #define MSG_FREE_MEMORY " memoria Livre: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Guardado."
- #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
- #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
- #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
- #define MSG_FILE_PRINTED "Impressao terminada"
- #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
- #define MSG_END_FILE_LIST "Fim da lista de arquivos"
- #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
- #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
- #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
- #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
- #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
- #define MSG_HEATING "Aquecendo..."
- #define MSG_HEATING_COMPLETE "Aquecido."
- #define MSG_BED_HEATING "Aquecendo a Base."
- #define MSG_BED_DONE "Base quente."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Conta X:"
- #define MSG_ERR_KILLED "Impressora parada com kill() !!"
- #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
- #define MSG_RESEND "Reenviar:"
- #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
- #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
- #define MSG_INVALID_EXTRUDER "Extrusor invalido"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Relatando estado do ponto final"
- #define MSG_ENDSTOP_HIT "PULSADO"
- #define MSG_ENDSTOP_OPEN "Aberto"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
- #define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
- #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
- #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
- #define MSG_SD_CARD_OK "cartao SD ok"
- #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
- #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
- #define MSG_SD_FILE_OPENED "Arquivo aberto:"
- #define MSG_SD_SIZE " Size:"
- #define MSG_SD_FILE_SELECTED "Arquivo selecionado"
- #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
- #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
- #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
- #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
- #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
-
- #define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
- #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
- #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
-
-
-#endif
-
-
-
-#if LANGUAGE_CHOICE == 9
-
-// Finnish
-
-// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " valmis"
- #define MSG_SD_INSERTED "Kortti asetettu"
- #define MSG_SD_REMOVED "Kortti poistettu"
- #define MSG_MAIN "Palaa"
- #define MSG_AUTOSTART "Automaatti"
- #define MSG_DISABLE_STEPPERS "Vapauta moottorit"
- #define MSG_AUTO_HOME "Aja referenssiin"
- #define MSG_SET_ORIGIN "Aseta origo"
- #define MSG_PREHEAT_PLA "Esilammita PLA"
- #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
- #define MSG_PREHEAT_ABS "Esilammita ABS"
- #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
- #define MSG_COOLDOWN "Jaahdyta"
- #define MSG_EXTRUDE "Pursota"
- #define MSG_RETRACT "Veda takaisin"
- #define MSG_MOVE_AXIS "Liikuta akseleita"
- #define MSG_SPEED "Nopeus"
- #define MSG_NOZZLE "Suutin"
- #define MSG_NOZZLE1 "Suutin2"
- #define MSG_NOZZLE2 "Suutin3"
- #define MSG_BED "Alusta"
- #define MSG_FAN_SPEED "Tuul. nopeus"
- #define MSG_FLOW "Virtaus"
- #define MSG_CONTROL "Kontrolli"
- #define MSG_MIN " \002 Min"
- #define MSG_MAX " \002 Max"
- #define MSG_FACTOR " \002 Kerr"
- #define MSG_AUTOTEMP "Autotemp"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Kiihtyv"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VMAX "Vmax "
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "VLiike min"
- #define MSG_AMAX "Amax "
- #define MSG_A_RETRACT "A-peruuta"
- #define MSG_XSTEPS "Xsteps/mm"
- #define MSG_YSTEPS "Ysteps/mm"
- #define MSG_ZSTEPS "Zsteps/mm"
- #define MSG_ESTEPS "Esteps/mm"
- #define MSG_RECTRACT "Veda takaisin"
- #define MSG_TEMPERATURE "Lampotila"
- #define MSG_MOTION "Liike"
- #define MSG_STORE_EPROM "Tallenna muistiin"
- #define MSG_LOAD_EPROM "Lataa muistista"
- #define MSG_RESTORE_FAILSAFE "Palauta oletus"
- #define MSG_REFRESH "Paivita"
- #define MSG_WATCH "Seuraa"
- #define MSG_PREPARE "Valmistele"
- #define MSG_TUNE "Saada"
- #define MSG_PAUSE_PRINT "Keskeyta tulostus"
- #define MSG_RESUME_PRINT "Jatka tulostusta"
- #define MSG_STOP_PRINT "Pysayta tulostus"
- #define MSG_CARD_MENU "Korttivalikko"
- #define MSG_NO_CARD "Ei korttia"
- #define MSG_DWELL "Nukkumassa..."
- #define MSG_USERWAIT "Odotetaan valintaa..."
- #define MSG_RESUMING "Jatketaan tulostusta"
- #define MSG_NO_MOVE "Ei liiketta."
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_CONTROL_RETRACT "Veda mm"
- #define MSG_CONTROL_RETRACTF "Veda F"
- #define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
- #define MSG_AUTORETRACT "AutoVeto."
- #define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
- #define MSG_Enqueing "jonoon \""
- #define MSG_POWERUP "Kaynnistys"
- #define MSG_EXTERNAL_RESET " Ulkoinen Reset"
- #define MSG_BROWNOUT_RESET " Alajannite Reset"
- #define MSG_WATCHDOG_RESET " Vahtikoira Reset"
- #define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
- #define MSG_FREE_MEMORY " Vapaata muistia: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Tiedosto tallennettu."
- #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
- #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
- #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
- #define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
- #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
- #define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
- #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
- #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
- #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
- #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
- #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
- #define MSG_HEATING "Lammitan..."
- #define MSG_HEATING_COMPLETE "Lammitys valmis."
- #define MSG_BED_HEATING "Alusta lampiaa."
- #define MSG_BED_DONE "Alusta valmis."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Laskuri X: "
- #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
- #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
- #define MSG_RESEND "Uudelleenlahetys: "
- #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
- #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
- #define MSG_INVALID_EXTRUDER "Virheellinen suutin"
- #define MSG_X_MIN "x_min: "
- #define MSG_X_MAX "x_max: "
- #define MSG_Y_MIN "y_min: "
- #define MSG_Y_MAX "y_max: "
- #define MSG_Z_MIN "z_min: "
- #define MSG_Z_MAX "z_max: "
- #define MSG_M119_REPORT "Rajakytkimien tilaraportti"
- #define MSG_ENDSTOP_HIT "AKTIIVISENA"
- #define MSG_ENDSTOP_OPEN "avoinna"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
- #define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
- #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
- #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
- #define MSG_SD_CARD_OK "SD kortti ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
- #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
- #define MSG_SD_FILE_OPENED "Tiedosto avattu: "
- #define MSG_SD_SIZE " Koko: "
- #define MSG_SD_FILE_SELECTED "Tiedosto valittu"
- #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
- #define MSG_SD_PRINTING_BYTE "SD tulostus byte "
- #define MSG_SD_NOT_PRINTING "Ei SD tulostus"
- #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
- #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
-
- #define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: "
- #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
- #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
-
-#endif
-#endif // ifndef LANGUAGE_H
+#ifndef LANGUAGE_H
+#define LANGUAGE_H
+
+// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
+//
+// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
+// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
+
+// Languages
+// 1 English
+// 2 Polish
+// 3 French (awaiting translation!)
+// 4 German
+// 5 Spanish
+// 6 Russian
+// 7 Italian
+// 8 Portuguese
+// 9 Finnish
+
+#ifndef LANGUAGE_CHOICE
+#define LANGUAGE_CHOICE 1 // Pick your language from the list above
+#endif
+
+#define PROTOCOL_VERSION "1.0"
+
+#if MOTHERBOARD == 7 || MOTHERBOARD == 71
+ #define MACHINE_NAME "Ultimaker"
+ #define FIRMWARE_URL "http://firmware.ultimaker.com"
+#else
+ #define MACHINE_NAME "Mendel"
+ #define FIRMWARE_URL "http://www.mendel-parts.com"
+#endif
+
+#define STRINGIFY_(n) #n
+#define STRINGIFY(n) STRINGIFY_(n)
+
+#if LANGUAGE_CHOICE == 1
+
+// LCD Menu Messages
+ #define WELCOME_MSG MACHINE_NAME " Ready."
+ #define MSG_SD_INSERTED "Card inserted"
+ #define MSG_SD_REMOVED "Card removed"
+ #define MSG_MAIN "Main"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS "Disable Steppers"
+ #define MSG_AUTO_HOME "Auto Home"
+ #define MSG_SET_ORIGIN "Set Origin"
+ #define MSG_PREHEAT_PLA "Preheat PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
+ #define MSG_PREHEAT_ABS "Preheat ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
+ #define MSG_COOLDOWN "Cooldown"
+ #define MSG_EXTRUDE "Extrude"
+ #define MSG_RETRACT "Retract"
+ #define MSG_MOVE_AXIS "Move Axis"
+ #define MSG_SPEED "Speed"
+ #define MSG_NOZZLE "Nozzle"
+ #define MSG_NOZZLE1 "Nozzle2"
+ #define MSG_NOZZLE2 "Nozzle3"
+ #define MSG_BED "Bed"
+ #define MSG_FAN_SPEED "Fan speed"
+ #define MSG_FLOW "Flow"
+ #define MSG_CONTROL "Control"
+ #define MSG_MIN " \002 Min"
+ #define MSG_MAX " \002 Max"
+ #define MSG_FACTOR " \002 Fact"
+ #define MSG_AUTOTEMP "Autotemp"
+ #define MSG_ON "On "
+ #define MSG_OFF "Off"
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Accel"
+ #define MSG_VXY_JERK "Vxy-jerk"
+ #define MSG_VMAX "Vmax "
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "VTrav min"
+ #define MSG_AMAX "Amax "
+ #define MSG_A_RETRACT "A-retract"
+ #define MSG_XSTEPS "Xsteps/mm"
+ #define MSG_YSTEPS "Ysteps/mm"
+ #define MSG_ZSTEPS "Zsteps/mm"
+ #define MSG_ESTEPS "Esteps/mm"
+ #define MSG_RECTRACT "Rectract"
+ #define MSG_TEMPERATURE "Temperature"
+ #define MSG_MOTION "Motion"
+ #define MSG_STORE_EPROM "Store memory"
+ #define MSG_LOAD_EPROM "Load memory"
+ #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
+ #define MSG_REFRESH "Refresh"
+ #define MSG_WATCH "Watch"
+ #define MSG_PREPARE "Prepare"
+ #define MSG_TUNE "Tune"
+ #define MSG_PAUSE_PRINT "Pause Print"
+ #define MSG_RESUME_PRINT "Resume Print"
+ #define MSG_STOP_PRINT "Stop Print"
+ #define MSG_CARD_MENU "Card Menu"
+ #define MSG_NO_CARD "No Card"
+ #define MSG_DWELL "Sleep..."
+ #define MSG_USERWAIT "Wait for user..."
+ #define MSG_RESUMING "Resuming print"
+ #define MSG_NO_MOVE "No move."
+ #define MSG_KILLED "KILLED. "
+ #define MSG_STOPPED "STOPPED. "
+ #define MSG_CONTROL_RETRACT "Retract mm"
+ #define MSG_CONTROL_RETRACTF "Retract F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
+ #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
+ #define MSG_AUTORETRACT "AutoRetr."
+ #define MSG_FILAMENTCHANGE "Change filament"
+ #define MSG_INIT_SDCARD "Init. SD-Card"
+ #define MSG_CNG_SDCARD "Change SD-Card"
+
+// Serial Console Messages
+
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " External Reset"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Last Updated: "
+ #define MSG_FREE_MEMORY " Free Memory: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Done saving file."
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
+ #define MSG_FILE_PRINTED "Done printing file"
+ #define MSG_BEGIN_FILE_LIST "Begin file list"
+ #define MSG_END_FILE_LIST "End file list"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+ #define MSG_HEATING "Heating..."
+ #define MSG_HEATING_COMPLETE "Heating done."
+ #define MSG_BED_HEATING "Bed Heating."
+ #define MSG_BED_DONE "Bed done."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Count X: "
+ #define MSG_ERR_KILLED "Printer halted. kill() called!"
+ #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+ #define MSG_RESEND "Resend: "
+ #define MSG_UNKNOWN_COMMAND "Unknown command: \""
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Reporting endstop status"
+ #define MSG_ENDSTOP_HIT "TRIGGERED"
+ #define MSG_ENDSTOP_OPEN "open"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+ #define MSG_SD_INIT_FAIL "SD init fail"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+ #define MSG_SD_FILE_OPENED "File opened: "
+ #define MSG_SD_SIZE " Size: "
+ #define MSG_SD_FILE_SELECTED "File selected"
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Not SD printing"
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+
+ #define MSG_STEPPER_TO_HIGH "Steprate to high: "
+ #define MSG_ENDSTOPS_HIT "endstops hit: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 2
+
+// LCD Menu Messages
+ #define WELCOME_MSG MACHINE_NAME " Gotowe."
+ #define MSG_SD_INSERTED "Karta wlozona"
+ #define MSG_SD_REMOVED "Karta usunieta"
+ #define MSG_MAIN "Main"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS "Wylacz silniki"
+ #define MSG_AUTO_HOME "Auto. poz. zerowa"
+ #define MSG_SET_ORIGIN "Ustaw punkt zerowy"
+ #define MSG_PREHEAT_PLA "Rozgrzej PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
+ #define MSG_PREHEAT_ABS "Rozgrzej ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
+ #define MSG_COOLDOWN "Chlodzenie"
+ #define MSG_EXTRUDE "Ekstruzja"
+ #define MSG_RETRACT "Cofanie"
+ #define MSG_MOVE_AXIS "Ruch osi"
+ #define MSG_SPEED "Predkosc"
+ #define MSG_NOZZLE "Dysza"
+ #define MSG_NOZZLE1 "Dysza2"
+ #define MSG_NOZZLE2 "Dysza3"
+ #define MSG_BED "Loze"
+ #define MSG_FAN_SPEED "Obroty wiatraka"
+ #define MSG_FLOW "Przeplyw"
+ #define MSG_CONTROL "Kontrola"
+ #define MSG_MIN " \002 Min"
+ #define MSG_MAX " \002 Max"
+ #define MSG_FACTOR " \002 Mnoznik"
+ #define MSG_AUTOTEMP "Auto. temp."
+ #define MSG_ON "Wl. "
+ #define MSG_OFF "Wyl."
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Acc"
+ #define MSG_VXY_JERK "Zryw Vxy"
+ #define MSG_VMAX "Vmax"
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "Vskok min"
+ #define MSG_AMAX "Amax"
+ #define MSG_A_RETRACT "A-wycofanie"
+ #define MSG_XSTEPS "krokiX/mm"
+ #define MSG_YSTEPS "krokiY/mm"
+ #define MSG_ZSTEPS "krokiZ/mm"
+ #define MSG_ESTEPS "krokiE/mm"
+ #define MSG_RECTRACT "Wycofanie"
+ #define MSG_TEMPERATURE "Temperatura"
+ #define MSG_MOTION "Ruch"
+ #define MSG_STORE_EPROM "Zapisz w pamieci"
+ #define MSG_LOAD_EPROM "Wczytaj z pamieci"
+ #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
+ #define MSG_REFRESH "\004Odswiez"
+ #define MSG_WATCH "Obserwuj"
+ #define MSG_PREPARE "Przygotuj"
+ #define MSG_CONTROL "Kontroluj"
+ #define MSG_TUNE "Strojenie"
+ #define MSG_PAUSE_PRINT "Pauza"
+ #define MSG_RESUME_PRINT "Wznowienie"
+ #define MSG_STOP_PRINT "Stop"
+ #define MSG_CARD_MENU "Menu SDCard"
+ #define MSG_NO_CARD "Brak karty"
+ #define MSG_DWELL "Uspij..."
+ #define MSG_USERWAIT "Czekaj na uzytkownika..."
+ #define MSG_RESUMING "Wznawiam drukowanie"
+ #define MSG_NO_MOVE "Brak ruchu."
+ #define MSG_PART_RELEASE "Czesciowe zwolnienie"
+ #define MSG_KILLED "Ubity. "
+ #define MSG_STOPPED "Zatrzymany. "
+ #define MSG_STEPPER_RELEASED "Zwolniony."
+ #define MSG_CONTROL_RETRACT "Wycofaj mm"
+ #define MSG_CONTROL_RETRACTF "Wycofaj F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
+ #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
+ #define MSG_AUTORETRACT "Auto. wycofanie"
+ #define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+ #define MSG_Enqueing "Kolejkowanie \""
+ #define MSG_POWERUP "Zasilanie wlaczone"
+ #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
+ #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
+ #define MSG_WATCHDOG_RESET " Reset (watchdog)"
+ #define MSG_SOFTWARE_RESET " Reset (programowy)"
+ #define MSG_MARLIN "Marlin "
+ #define MSG_AUTHOR " | Autor: "
+ #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
+ #define MSG_FREE_MEMORY " Wolna pamiec: "
+ #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Plik zapisany."
+ #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
+ #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
+ #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
+ #define MSG_BEGIN_FILE_LIST "Start listy plikow"
+ #define MSG_END_FILE_LIST "Koniec listy plikow"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
+ #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
+ #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
+ #define MSG_HEATING "Nagrzewanie ekstrudera..."
+ #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
+ #define MSG_BED_HEATING "Nagrzewanie loza..."
+ #define MSG_BED_DONE "Nagrzewanie loza zakonczone."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Liczenie X: "
+ #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
+ #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
+ #define MSG_RESEND "Wyslij ponownie: "
+ #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
+ #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
+ #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
+ #define MSG_ENDSTOP_HIT "WYZWOLONY"
+ #define MSG_ENDSTOP_OPEN "otwarty"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
+ #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
+ #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
+ #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
+ #define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
+ #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
+ #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
+ #define MSG_SD_FILE_OPENED "Otwarto plik:"
+ #define MSG_SD_SIZE " Rozmiar:"
+ #define MSG_SD_FILE_SELECTED "Wybrano plik"
+ #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
+ #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
+ #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
+ #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
+
+ #define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
+ #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 3
+
+#define WELCOME_MSG MACHINE_NAME " Pret."
+#define MSG_SD_INSERTED "Carte inseree"
+#define MSG_SD_REMOVED "Carte retiree"
+#define MSG_MAIN " Principal \003"
+#define MSG_AUTOSTART " Demarrage auto."
+#define MSG_DISABLE_STEPPERS " Desactiver moteurs"
+#define MSG_AUTO_HOME " Home auto."
+#define MSG_SET_ORIGIN " Regler origine"
+#define MSG_PREHEAT_PLA " Prechauffage PLA"
+#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
+#define MSG_PREHEAT_ABS " Prechauffage ABS"
+#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
+#define MSG_COOLDOWN " Refroidissement"
+#define MSG_EXTRUDE " Extrusion"
+#define MSG_RETRACT " Retractation"
+#define MSG_PREHEAT_PLA " Prechauffage PLA"
+#define MSG_PREHEAT_ABS " Prechauffage ABS"
+#define MSG_MOVE_AXIS " Deplacer axe \x7E"
+#define MSG_SPEED " Vitesse:"
+#define MSG_NOZZLE " \002Buse:"
+#define MSG_NOZZLE1 " \002Buse2:"
+#define MSG_NOZZLE2 " \002Buse3:"
+#define MSG_BED " \002Lit:"
+#define MSG_FAN_SPEED " Vitesse ventilateur:"
+#define MSG_FLOW " Flux:"
+#define MSG_CONTROL " Controle \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Facteur:"
+#define MSG_AUTOTEMP " Temp. Auto.:"
+#define MSG_ON "Marche "
+#define MSG_OFF "Arret"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " Vdepl min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retract:"
+#define MSG_XSTEPS " Xpas/mm:"
+#define MSG_YSTEPS " Ypas/mm:"
+#define MSG_ZSTEPS " Zpas/mm:"
+#define MSG_ESTEPS " Epas/mm:"
+#define MSG_MAIN_WIDE " Principal \003"
+#define MSG_RECTRACT_WIDE " Rectractater \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+#define MSG_TEMPERATURE_RTN " Temperature \003"
+#define MSG_MOTION_WIDE " Mouvement \x7E"
+#define MSG_STORE_EPROM " Sauvegarder memoire"
+#define MSG_LOAD_EPROM " Lire memoire"
+#define MSG_RESTORE_FAILSAFE " Restaurer memoire"
+#define MSG_REFRESH "\004Actualiser"
+#define MSG_WATCH " Surveiller \003"
+#define MSG_PREPARE " Preparer \x7E"
+#define MSG_PREPARE_ALT " Prepare \003"
+#define MSG_CONTROL_ARROW " Controle \x7E"
+#define MSG_RETRACT_ARROW " Retracter \x7E"
+#define MSG_TUNE " Regler \x7E"
+#define MSG_PAUSE_PRINT " Pause impression \x7E"
+#define MSG_RESUME_PRINT " Reprendre impression \x7E"
+#define MSG_STOP_PRINT " Arreter impression \x7E"
+#define MSG_CARD_MENU " Menu carte \x7E"
+#define MSG_NO_CARD " Pas de carte"
+#define MSG_DWELL "Repos..."
+#define MSG_USERWAIT "Attente de l'utilisateur..."
+#define MSG_NO_MOVE "Aucun mouvement."
+#define MSG_PART_RELEASE "Relache partielle"
+#define MSG_KILLED "TUE."
+#define MSG_STOPPED "STOPPE."
+#define MSG_STEPPER_RELEASED "RELACHE."
+#define MSG_CONTROL_RETRACT " Retractation mm:"
+#define MSG_CONTROL_RETRACTF " Retractation F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
+#define MSG_AUTORETRACT " Retract. Auto.:"
+#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+#define MSG_Enqueing "Mise en tampon \""
+#define MSG_POWERUP "Allumage"
+#define MSG_EXTERNAL_RESET " RAZ Externe"
+#define MSG_BROWNOUT_RESET " RAZ defaut alim."
+#define MSG_WATCHDOG_RESET " RAZ Watchdog"
+#define MSG_SOFTWARE_RESET " RAZ logicielle"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Auteur: "
+#define MSG_CONFIGURATION_VER " Derniere MaJ: "
+#define MSG_FREE_MEMORY " Memoire libre: "
+#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Fichier enregistre."
+#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
+#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
+#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
+#define MSG_FILE_PRINTED "Impression terminee"
+#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
+#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
+#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
+#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
+#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
+#define MSG_HEATING "En chauffe..."
+#define MSG_HEATING_COMPLETE "Chauffe terminee."
+#define MSG_BED_HEATING "Chauffe du lit."
+#define MSG_BED_DONE "Chauffe du lit terminee."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Compteur X: "
+#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
+#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
+#define MSG_RESEND "Renvoie: "
+#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
+#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
+#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
+#define MSG_X_MIN "x_min: "
+#define MSG_X_MAX "x_max: "
+#define MSG_Y_MIN "y_min: "
+#define MSG_Y_MAX "y_max: "
+#define MSG_Z_MIN "z_min: "
+#define MSG_Z_MAX "z_max: "
+#define MSG_M119_REPORT "Affichage du status des fin de course"
+#define MSG_ENDSTOP_HIT "DECLENCHE"
+#define MSG_ENDSTOP_OPEN "OUVERT"
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
+#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
+#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
+#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
+#define MSG_SD_CARD_OK "Carte SD Ok"
+#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
+#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
+#define MSG_SD_FILE_OPENED "Fichier ouvert: "
+#define MSG_SD_SIZE " Taille: "
+#define MSG_SD_FILE_SELECTED "Fichier selectionne"
+#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
+#define MSG_SD_PRINTING_BYTE "Octet impression SD "
+#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
+#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
+
+#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
+#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
+#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 4
+
+// LCD Menu Messages
+
+ #define WELCOME_MSG MACHINE_NAME " Bereit."
+
+ #define MSG_SD_INSERTED "SDKarte erkannt"
+ #define MSG_SD_REMOVED "SDKarte entfernt"
+ #define MSG_MAIN "Hauptmneü"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS "Stepper abschalten"
+ #define MSG_AUTO_HOME "Auto Nullpunkt"
+ #define MSG_SET_ORIGIN "Setze Nullpunkt"
+ #define MSG_PREHEAT_PLA "Vorwärmen PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
+ #define MSG_PREHEAT_ABS "Vorwärmen ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
+ #define MSG_COOLDOWN "Abkühlen"
+ #define MSG_EXTRUDE "Extrude"
+ #define MSG_RETRACT "Retract"
+ #define MSG_MOVE_AXIS "Achsen bewegen"
+ #define MSG_SPEED "Geschw"
+ #define MSG_NOZZLE "Düse"
+ #define MSG_NOZZLE1 "Düse2"
+ #define MSG_NOZZLE2 "Düse3"
+ #define MSG_BED "Bett"
+ #define MSG_FAN_SPEED "Lüftergeschw."
+ #define MSG_FLOW "Fluß"
+ #define MSG_CONTROL "Einstellungen"
+ #define MSG_MIN "\002 Min"
+ #define MSG_MAX "\002 Max"
+ #define MSG_FACTOR "\002 Faktor"
+ #define MSG_AUTOTEMP "AutoTemp"
+ #define MSG_ON "Ein"
+ #define MSG_OFF "Aus"
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Acc"
+ #define MSG_VXY_JERK "Vxy-jerk"
+ #define MSG_VMAX "Vmax "
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "VTrav min"
+ #define MSG_AMAX "Amax "
+ #define MSG_A_RETRACT "A-Retract"
+ #define MSG_XSTEPS "Xsteps/mm"
+ #define MSG_YSTEPS "Ysteps/mm"
+ #define MSG_ZSTEPS "Zsteps/mm"
+ #define MSG_ESTEPS "Esteps/mm"
+ #define MSG_RECTRACT_WIDE "Rectract"
+ #define MSG_WATCH "Beobachten"
+ #define MSG_TEMPERATURE "Temperatur"
+ #define MSG_MOTION "Bewegung"
+ #define MSG_STORE_EPROM "EPROM speichern"
+ #define MSG_LOAD_EPROM "EPROM laden"
+ #define MSG_RESTORE_FAILSAFE "Standardkonfig."
+ #define MSG_REFRESH "Aktualisieren"
+ #define MSG_PREPARE "Vorbereitung"
+ #define MSG_CONTROL "Einstellungen"
+ #define MSG_TUNE "Justierung"
+ #define MSG_PAUSE_PRINT "Druck anhalten"
+ #define MSG_RESUME_PRINT "Druck fortsetz"
+ #define MSG_STOP_PRINT "Druck stoppen"
+ #define MSG_CARD_MENU "SDKarten Menü"
+ #define MSG_NO_CARD "Keine SDKarte"
+ #define MSG_DWELL "Warten..."
+ #define MSG_USERWAIT "Warte auf Nutzer..."
+ #define MSG_RESUMING "Druck fortsetzung"
+ #define MSG_NO_MOVE "Kein Zug."
+ #define MSG_PART_RELEASE "Stepper tlw frei"
+ #define MSG_KILLED "KILLED"
+ #define MSG_STOPPED "GESTOPPT"
+ #define MSG_STEPPER_RELEASED "Stepper frei"
+ #define MSG_CONTROL_RETRACT "Retract mm"
+ #define MSG_CONTROL_RETRACTF "Retract F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
+ #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
+ #define MSG_AUTORETRACT "AutoRetr."
+ #define MSG_FILAMENTCHANGE "Filament wechseln"
+
+// Serial Console Messages
+
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " External Reset"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin: "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Last Updated: "
+ #define MSG_FREE_MEMORY " Free Memory: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Done saving file."
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+ #define MSG_FILE_PRINTED "Done printing file"
+ #define MSG_BEGIN_FILE_LIST "Begin file list"
+ #define MSG_END_FILE_LIST "End file list"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+ #define MSG_HEATING "Heating..."
+ #define MSG_HEATING_COMPLETE "Heating done."
+ #define MSG_BED_HEATING "Bed Heating."
+ #define MSG_BED_DONE "Bed done."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Count X:"
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"
+ #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
+ #define MSG_RESEND "Resend:"
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Reporting endstop status"
+ #define MSG_ENDSTOP_HIT "TRIGGERED"
+ #define MSG_ENDSTOP_OPEN "open"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+ #define MSG_SD_INIT_FAIL "SD init fail"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+ #define MSG_SD_FILE_OPENED "File opened:"
+ #define MSG_SD_SIZE " Size:"
+ #define MSG_SD_FILE_SELECTED "File selected"
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Not SD printing"
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+
+ #define MSG_STEPPER_TO_HIGH "Steprate to high : "
+ #define MSG_ENDSTOPS_HIT "endstops hit: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 5
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME " Lista."
+#define MSG_SD_INSERTED "Tarjeta SD Colocada"
+#define MSG_SD_REMOVED "Tarjeta SD Retirada"
+#define MSG_MAIN " Menu Principal \003"
+#define MSG_AUTOSTART " Autostart"
+#define MSG_DISABLE_STEPPERS " Apagar Motores"
+#define MSG_AUTO_HOME " Llevar Ejes al Cero"
+#define MSG_SET_ORIGIN " Establecer Cero"
+#define MSG_COOLDOWN " Enfriar"
+#define MSG_EXTRUDE " Extruir"
+#define MSG_RETRACT " Retraer"
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
+#define MSG_MOVE_AXIS " Mover Ejes \x7E"
+#define MSG_SPEED " Velocidad:"
+#define MSG_NOZZLE " \002Nozzle:"
+#define MSG_NOZZLE1 " \002Nozzle2:"
+#define MSG_NOZZLE2 " \002Nozzle3:"
+#define MSG_BED " \002Base:"
+#define MSG_FAN_SPEED " Ventilador:"
+#define MSG_FLOW " Flujo:"
+#define MSG_CONTROL " Control \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Fact:"
+#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_ON "On "
+#define MSG_OFF "Off"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retrac.:"
+#define MSG_XSTEPS " Xpasos/mm:"
+#define MSG_YSTEPS " Ypasos/mm:"
+#define MSG_ZSTEPS " Zpasos/mm:"
+#define MSG_ESTEPS " Epasos/mm:"
+#define MSG_MAIN_WIDE " Menu Principal \003"
+#define MSG_RECTRACT_WIDE " Retraer \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
+#define MSG_TEMPERATURE_RTN " Temperatura \003"
+#define MSG_MOTION_WIDE " Movimiento \x7E"
+#define MSG_STORE_EPROM " Guardar Memoria"
+#define MSG_LOAD_EPROM " Cargar Memoria"
+#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+#define MSG_REFRESH "\004Volver a cargar"
+#define MSG_WATCH " Monitorizar \003"
+#define MSG_PREPARE " Preparar \x7E"
+#define MSG_PREPARE_ALT " Preparar \003"
+#define MSG_CONTROL_ARROW " Control \x7E"
+#define MSG_RETRACT_ARROW " Retraer \x7E"
+#define MSG_TUNE " Ajustar \x7E"
+#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
+#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
+#define MSG_STOP_PRINT " Detener Impresion \x7E"
+#define MSG_CARD_MENU " Menu de SD \x7E"
+#define MSG_NO_CARD " No hay Tarjeta SD"
+#define MSG_DWELL "Reposo..."
+#define MSG_USERWAIT "Esperando Ordenes..."
+#define MSG_NO_MOVE "Sin movimiento"
+#define MSG_PART_RELEASE "Desacople Parcial"
+#define MSG_KILLED "PARADA DE EMERGENCIA. "
+#define MSG_STOPPED "PARADA. "
+#define MSG_STEPPER_RELEASED "Desacoplada."
+#define MSG_CONTROL_RETRACT " Retraer mm:"
+#define MSG_CONTROL_RETRACTF " Retraer F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
+#define MSG_AUTORETRACT " AutoRetr.:"
+#define MSG_FILAMENTCHANGE "Change filament"
+// Serial Console Messages
+
+#define MSG_Enqueing "En cola \""
+#define MSG_POWERUP "PowerUp"
+#define MSG_EXTERNAL_RESET " Reset Externo"
+#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
+#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
+#define MSG_SOFTWARE_RESET " Reset por Software"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Autor: "
+#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
+#define MSG_FREE_MEMORY " Memoria libre: "
+#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Guardado."
+#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
+#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
+#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
+#define MSG_FILE_PRINTED "Impresion terminada"
+#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
+#define MSG_END_FILE_LIST "Fin de la lista de archivos"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
+#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
+#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
+#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
+#define MSG_HEATING "Calentando..."
+#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
+#define MSG_BED_HEATING "Calentando la base."
+#define MSG_BED_DONE "Base Caliente."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Cuenta X:"
+#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
+#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
+#define MSG_RESEND "Reenviar:"
+#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
+#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
+#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
+#define MSG_X_MIN "x_min: "
+#define MSG_X_MAX "x_max: "
+#define MSG_Y_MIN "y_min: "
+#define MSG_Y_MAX "y_max: "
+#define MSG_Z_MIN "z_min: "
+#define MSG_M119_REPORT "Comprobando fines de carrera."
+#define MSG_ENDSTOP_HIT "PULSADO"
+#define MSG_ENDSTOP_OPEN "abierto"
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
+#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
+#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
+#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
+#define MSG_SD_CARD_OK "Tarjeta SD OK"
+#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
+#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
+#define MSG_SD_FILE_OPENED "Archivo abierto:"
+#define MSG_SD_SIZE " Tamaño:"
+#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
+#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
+#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
+#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
+#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
+
+#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
+#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
+#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
+
+#endif
+
+#if LANGUAGE_CHOICE == 6
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME " Готов"
+#define MSG_SD_INSERTED "Карта вставлена"
+#define MSG_SD_REMOVED "Карта извлечена"
+#define MSG_MAIN " Меню \003"
+#define MSG_AUTOSTART " Автостарт "
+#define MSG_DISABLE_STEPPERS " Выключить двигатели"
+#define MSG_AUTO_HOME " Парковка "
+#define MSG_SET_ORIGIN " Запомнить ноль "
+#define MSG_PREHEAT_PLA " Преднагрев PLA "
+#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
+#define MSG_PREHEAT_ABS " Преднагрев ABS "
+#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
+#define MSG_COOLDOWN " Охлаждение "
+#define MSG_EXTRUDE " Экструзия "
+#define MSG_RETRACT " Откат"
+#define MSG_MOVE_AXIS " Движение по осям \x7E"
+#define MSG_SPEED " Скорость:"
+#define MSG_NOZZLE " \002 Фильера:"
+#define MSG_NOZZLE1 " \002 Фильера2:"
+#define MSG_NOZZLE2 " \002 Фильера3:"
+#define MSG_BED " \002 Кровать:"
+#define MSG_FAN_SPEED " Куллер:"
+#define MSG_FLOW " Поток:"
+#define MSG_CONTROL " Настройки \003"
+#define MSG_MIN " \002 Минимум:"
+#define MSG_MAX " \002 Максимум:"
+#define MSG_FACTOR " \002 Фактор:"
+#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_ON "Вкл. "
+#define MSG_OFF "Выкл. "
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retract:"
+#define MSG_XSTEPS " X шаг/mm:"
+#define MSG_YSTEPS " Y шаг/mm:"
+#define MSG_ZSTEPS " Z шаг/mm:"
+#define MSG_ESTEPS " E шаг/mm:"
+#define MSG_RECTRACT " Откат подачи \x7E"
+#define MSG_TEMPERATURE " Температура \x7E"
+#define MSG_MOTION " Скорости \x7E"
+#define MSG_STORE_EPROM " Сохранить настройки"
+#define MSG_LOAD_EPROM " Загрузить настройки"
+#define MSG_RESTORE_FAILSAFE " Сброс настроек "
+#define MSG_REFRESH "\004Обновить "
+#define MSG_WATCH " Обзор \003"
+#define MSG_PREPARE " Действия \x7E"
+#define MSG_TUNE " Настройки \x7E"
+#define MSG_PAUSE_PRINT " Пауза печати \x7E"
+#define MSG_RESUME_PRINT " Продолжить печать \x7E"
+#define MSG_STOP_PRINT " Остановить печать \x7E"
+#define MSG_CARD_MENU " Меню карты \x7E"
+#define MSG_NO_CARD " Нет карты"
+#define MSG_DWELL "Сон..."
+#define MSG_USERWAIT "Нажмите для продолж."
+#define MSG_NO_MOVE "Нет движения. "
+#define MSG_PART_RELEASE " Извлечение принта "
+#define MSG_KILLED "УБИТО. "
+#define MSG_STOPPED "ОСТАНОВЛЕНО. "
+#define MSG_CONTROL_RETRACT " Откат mm:"
+#define MSG_CONTROL_RETRACTF " Откат F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
+#define MSG_AUTORETRACT " АвтоОткат:"
+#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+#define MSG_Enqueing "Запланировано \""
+#define MSG_POWERUP "Включение питания"
+#define MSG_EXTERNAL_RESET " Внешний сброс"
+#define MSG_BROWNOUT_RESET " Brown out сброс"
+#define MSG_WATCHDOG_RESET " Watchdog сброс"
+#define MSG_SOFTWARE_RESET " программный сброс"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Автор: "
+#define MSG_CONFIGURATION_VER " Последнее обновление: "
+#define MSG_FREE_MEMORY " Памяти свободно: "
+#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Файл записан."
+#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
+#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
+#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
+#define MSG_FILE_PRINTED "Печать файла завершена"
+#define MSG_BEGIN_FILE_LIST "Список файлов"
+#define MSG_END_FILE_LIST "Конец списка файлов"
+#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
+#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
+#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
+#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
+#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
+#define MSG_HEATING "Нагрев... "
+#define MSG_HEATING_COMPLETE "Наргето. "
+#define MSG_BED_HEATING "Нагрев стола... "
+#define MSG_BED_DONE "Стол нагрет. "
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Count X:"
+#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
+#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
+#define MSG_RESEND "Переотправка:"
+#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
+#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
+#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
+#define MSG_X_MIN "x_min:"
+#define MSG_X_MAX "x_max:"
+#define MSG_Y_MIN "y_min:"
+#define MSG_Y_MAX "y_max:"
+#define MSG_Z_MIN "z_min:"
+#define MSG_Z_MAX "z_max:"
+#define MSG_M119_REPORT "Статус концевиков"
+#define MSG_ENDSTOP_HIT "Срабатывание концевика"
+#define MSG_ENDSTOP_OPEN "Концевик освобожден"
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
+#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
+#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
+#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
+#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
+#define MSG_SD_CARD_OK "SD карта в порядке"
+#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
+#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
+#define MSG_SD_FILE_OPENED "Файл открыт:"
+#define MSG_SD_SIZE " Размер:"
+#define MSG_SD_FILE_SELECTED "Файл выбран"
+#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
+#define MSG_SD_PRINTING_BYTE "SD печать byte "
+#define MSG_SD_NOT_PRINTING "нет SD печати"
+#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
+#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
+#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
+#define MSG_ENDSTOPS_HIT "концевик сработал: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
+#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 7
+
+ // LCD Menu Messages
+ #define WELCOME_MSG MACHINE_NAME " Pronto."
+ #define MSG_SD_INSERTED "SD Card inserita"
+ #define MSG_SD_REMOVED "SD Card rimossa"
+ #define MSG_MAIN "Menu principale"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS "Disabilita Motori"
+ #define MSG_AUTO_HOME "Auto Home"
+ #define MSG_SET_ORIGIN "Imposta Origine"
+ #define MSG_PREHEAT_PLA "Preriscalda PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
+ #define MSG_PREHEAT_ABS "Preriscalda ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
+ #define MSG_COOLDOWN "Rafredda"
+ #define MSG_EXTRUDE "Estrudi"
+ #define MSG_RETRACT "Ritrai"
+ #define MSG_MOVE_AXIS "Muovi Asse"
+ #define MSG_SPEED "Velcità"
+ #define MSG_NOZZLE "Ugello"
+ #define MSG_NOZZLE1 "Ugello2"
+ #define MSG_NOZZLE2 "Ugello3"
+ #define MSG_BED "Piatto"
+ #define MSG_FAN_SPEED "Ventola"
+ #define MSG_FLOW "Flusso"
+ #define MSG_CONTROL "Controllo"
+ #define MSG_MIN " \002 Min:"
+ #define MSG_MAX " \002 Max:"
+ #define MSG_FACTOR " \002 Fact:"
+ #define MSG_AUTOTEMP "Autotemp"
+ #define MSG_ON "On "
+ #define MSG_OFF "Off"
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Accel"
+ #define MSG_VXY_JERK "Vxy-jerk"
+ #define MSG_VMAX "Vmax"
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "VTrav min"
+ #define MSG_AMAX "Amax"
+ #define MSG_A_RETRACT "A-retract"
+ #define MSG_XSTEPS "Xpassi/mm"
+ #define MSG_YSTEPS "Ypassi/mm"
+ #define MSG_ZSTEPS "Zpassi/mm"
+ #define MSG_ESTEPS "Epassi/mm"
+ #define MSG_RECTRACT "Ritrai"
+ #define MSG_TEMPERATURE "Temperatura"
+ #define MSG_MOTION "Movimento"
+ #define MSG_STORE_EPROM "Salva in EEPROM"
+ #define MSG_LOAD_EPROM "Carica da EEPROM"
+ #define MSG_RESTORE_FAILSAFE "Impostaz. default"
+ #define MSG_REFRESH "Aggiorna"
+ #define MSG_WATCH "Guarda"
+ #define MSG_PREPARE "Prepara"
+ #define MSG_TUNE "Adatta"
+ #define MSG_PAUSE_PRINT "Pausa"
+ #define MSG_RESUME_PRINT "Riprendi Stampa"
+ #define MSG_STOP_PRINT "Arresta Stampa"
+ #define MSG_CARD_MENU "SD Card Menu"
+ #define MSG_NO_CARD "No SD Card"
+ #define MSG_DWELL "Sospensione..."
+ #define MSG_USERWAIT "Attendi Utente..."
+ #define MSG_RESUMING "Riprendi Stampa"
+ #define MSG_NO_MOVE "Nessun Movimento."
+ #define MSG_KILLED "UCCISO. "
+ #define MSG_STOPPED "ARRESTATO. "
+ #define MSG_CONTROL_RETRACT "Ritrai mm"
+ #define MSG_CONTROL_RETRACTF "Ritrai F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
+ #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
+ #define MSG_AUTORETRACT "AutoArretramento"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
+ #define MSG_FILAMENTCHANGE "Cambia filamento"
+ #define MSG_INIT_SDCARD "Iniz. SD-Card"
+ #define MSG_CNG_SDCARD "Cambia SD-Card"
+
+ // Serial Console Messages
+
+ #define MSG_Enqueing "accodamento \""
+ #define MSG_POWERUP "Accensione"
+ #define MSG_EXTERNAL_RESET " Reset Esterno"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin "
+ #define MSG_AUTHOR " | Autore: "
+ #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
+ #define MSG_FREE_MEMORY " Memoria Libera: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "File Salvato."
+ #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
+ #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
+ #define MSG_FILE_PRINTED "File stampato"
+ #define MSG_BEGIN_FILE_LIST "Inizio Lista File"
+ #define MSG_END_FILE_LIST "Fine Lista File"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
+ #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
+ #define MSG_HEATING "Riscaldamento..."
+ #define MSG_HEATING_COMPLETE "Stampante Calda."
+ #define MSG_BED_HEATING "Riscaldamento Piatto."
+ #define MSG_BED_DONE "Piatto Pronto."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Calcola X: "
+ #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
+ #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
+ #define MSG_RESEND "Reinviato:"
+ #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
+ #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
+ #define MSG_INVALID_EXTRUDER "Estrusore non valido"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Segnalazione stato degli endstop"
+ #define MSG_ENDSTOP_HIT "INNESCATO"
+ #define MSG_ENDSTOP_OPEN "aperto"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
+ #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
+ #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
+ #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
+ #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
+ #define MSG_SD_FILE_OPENED "File aperto: "
+ #define MSG_SD_SIZE " Dimensione: "
+ #define MSG_SD_FILE_SELECTED "File selezionato"
+ #define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
+ #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
+ #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
+ #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
+
+ #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: "
+ #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 8
+
+// LCD Menu Messages
+ #define WELCOME_MSG MACHINE_NAME " Pronta."
+ #define MSG_SD_INSERTED "Cartao SD inserido"
+ #define MSG_SD_REMOVED "Cartao SD removido"
+ #define MSG_MAIN " Menu Principal \003"
+ #define MSG_AUTOSTART " Autostart"
+ #define MSG_DISABLE_STEPPERS " Apagar Motores"
+ #define MSG_AUTO_HOME " Ir para Origen"
+ #define MSG_SET_ORIGIN " Estabelecer Origen"
+ #define MSG_PREHEAT_PLA " pre-aquecer PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
+ #define MSG_PREHEAT_ABS " pre-aquecer ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
+ #define MSG_COOLDOWN " Esfriar"
+ #define MSG_EXTRUDE " Extrudar"
+ #define MSG_RETRACT " Retrair"
+ #define MSG_PREHEAT_PLA " pre-aquecer PLA"
+ #define MSG_PREHEAT_ABS " pre-aquecer ABS"
+ #define MSG_MOVE_AXIS " Mover eixo \x7E"
+ #define MSG_SPEED " Velocidade:"
+ #define MSG_NOZZLE " \002Nozzle:"
+ #define MSG_NOZZLE1 " \002Nozzle2:"
+ #define MSG_NOZZLE2 " \002Nozzle3:"
+ #define MSG_BED " \002Base:"
+ #define MSG_FAN_SPEED " Velocidade Ventoinha:"
+ #define MSG_FLOW " Fluxo:"
+ #define MSG_CONTROL " Controle \003"
+ #define MSG_MIN " \002 Min:"
+ #define MSG_MAX " \002 Max:"
+ #define MSG_FACTOR " \002 Fact:"
+ #define MSG_AUTOTEMP " Autotemp:"
+ #define MSG_ON "On "
+ #define MSG_OFF "Off"
+ #define MSG_PID_P " PID-P: "
+ #define MSG_PID_I " PID-I: "
+ #define MSG_PID_D " PID-D: "
+ #define MSG_PID_C " PID-C: "
+ #define MSG_ACC " Acc:"
+ #define MSG_VXY_JERK " Vxy-jerk: "
+ #define MSG_VMAX " Vmax "
+ #define MSG_X "x:"
+ #define MSG_Y "y:"
+ #define MSG_Z "z:"
+ #define MSG_E "e:"
+ #define MSG_VMIN " Vmin:"
+ #define MSG_VTRAV_MIN " VTrav min:"
+ #define MSG_AMAX " Amax "
+ #define MSG_A_RETRACT " A-retract:"
+ #define MSG_XSTEPS " Xpasso/mm:"
+ #define MSG_YSTEPS " Ypasso/mm:"
+ #define MSG_ZSTEPS " Zpasso/mm:"
+ #define MSG_ESTEPS " Epasso/mm:"
+ #define MSG_MAIN_WIDE " Menu Principal \003"
+ #define MSG_RECTRACT_WIDE " Retrair \x7E"
+ #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
+ #define MSG_TEMPERATURE_RTN " Temperatura \003"
+ #define MSG_MOTION_WIDE " Movimento \x7E"
+ #define MSG_STORE_EPROM " Guardar memoria"
+ #define MSG_LOAD_EPROM " Carregar memoria"
+ #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+ #define MSG_REFRESH "\004Recarregar"
+ #define MSG_WATCH " Monitorar \003"
+ #define MSG_PREPARE " Preparar \x7E"
+ #define MSG_PREPARE_ALT " Preparar \003"
+ #define MSG_CONTROL_ARROW " Controle \x7E"
+ #define MSG_RETRACT_ARROW " Retrair \x7E"
+ #define MSG_TUNE " Tune \x7E"
+ #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
+ #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
+ #define MSG_STOP_PRINT " Parar Impressao \x7E"
+ #define MSG_CARD_MENU " Menu cartao SD \x7E"
+ #define MSG_NO_CARD " Sem cartao SD"
+ #define MSG_DWELL "Repouso..."
+ #define MSG_USERWAIT "Esperando Ordem..."
+ #define MSG_NO_MOVE "Sem movimento."
+ #define MSG_PART_RELEASE "Lancamento Parcial"
+ #define MSG_KILLED "PARADA DE EMERGENCIA. "
+ #define MSG_STOPPED "PARADA. "
+ #define MSG_STEPPER_RELEASED "Lancado."
+ #define MSG_CONTROL_RETRACT " Retrair mm:"
+ #define MSG_CONTROL_RETRACTF " Retrair F:"
+ #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+ #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+ #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
+ #define MSG_AUTORETRACT " AutoRetr.:"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
+ #define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " Reset Externo"
+ #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
+ #define MSG_WATCHDOG_RESET " Reset por Bloqueio"
+ #define MSG_SOFTWARE_RESET " Reset por Software"
+ #define MSG_MARLIN "Marlin "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Ultima atualizacao: "
+ #define MSG_FREE_MEMORY " memoria Livre: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Guardado."
+ #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
+ #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
+ #define MSG_FILE_PRINTED "Impressao terminada"
+ #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
+ #define MSG_END_FILE_LIST "Fim da lista de arquivos"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
+ #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
+ #define MSG_HEATING "Aquecendo..."
+ #define MSG_HEATING_COMPLETE "Aquecido."
+ #define MSG_BED_HEATING "Aquecendo a Base."
+ #define MSG_BED_DONE "Base quente."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Conta X:"
+ #define MSG_ERR_KILLED "Impressora parada com kill() !!"
+ #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
+ #define MSG_RESEND "Reenviar:"
+ #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
+ #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
+ #define MSG_INVALID_EXTRUDER "Extrusor invalido"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Relatando estado do ponto final"
+ #define MSG_ENDSTOP_HIT "PULSADO"
+ #define MSG_ENDSTOP_OPEN "Aberto"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
+ #define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
+ #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
+ #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
+ #define MSG_SD_CARD_OK "cartao SD ok"
+ #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
+ #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
+ #define MSG_SD_FILE_OPENED "Arquivo aberto:"
+ #define MSG_SD_SIZE " Size:"
+ #define MSG_SD_FILE_SELECTED "Arquivo selecionado"
+ #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
+ #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
+ #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
+ #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
+
+ #define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
+ #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
+
+
+#endif
+
+
+
+#if LANGUAGE_CHOICE == 9
+
+// Finnish
+
+// LCD Menu Messages
+ #define WELCOME_MSG MACHINE_NAME " valmis"
+ #define MSG_SD_INSERTED "Kortti asetettu"
+ #define MSG_SD_REMOVED "Kortti poistettu"
+ #define MSG_MAIN "Palaa"
+ #define MSG_AUTOSTART "Automaatti"
+ #define MSG_DISABLE_STEPPERS "Vapauta moottorit"
+ #define MSG_AUTO_HOME "Aja referenssiin"
+ #define MSG_SET_ORIGIN "Aseta origo"
+ #define MSG_PREHEAT_PLA "Esilammita PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
+ #define MSG_PREHEAT_ABS "Esilammita ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
+ #define MSG_COOLDOWN "Jaahdyta"
+ #define MSG_EXTRUDE "Pursota"
+ #define MSG_RETRACT "Veda takaisin"
+ #define MSG_MOVE_AXIS "Liikuta akseleita"
+ #define MSG_SPEED "Nopeus"
+ #define MSG_NOZZLE "Suutin"
+ #define MSG_NOZZLE1 "Suutin2"
+ #define MSG_NOZZLE2 "Suutin3"
+ #define MSG_BED "Alusta"
+ #define MSG_FAN_SPEED "Tuul. nopeus"
+ #define MSG_FLOW "Virtaus"
+ #define MSG_CONTROL "Kontrolli"
+ #define MSG_MIN " \002 Min"
+ #define MSG_MAX " \002 Max"
+ #define MSG_FACTOR " \002 Kerr"
+ #define MSG_AUTOTEMP "Autotemp"
+ #define MSG_ON "On "
+ #define MSG_OFF "Off"
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Kiihtyv"
+ #define MSG_VXY_JERK "Vxy-jerk"
+ #define MSG_VMAX "Vmax "
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "VLiike min"
+ #define MSG_AMAX "Amax "
+ #define MSG_A_RETRACT "A-peruuta"
+ #define MSG_XSTEPS "Xsteps/mm"
+ #define MSG_YSTEPS "Ysteps/mm"
+ #define MSG_ZSTEPS "Zsteps/mm"
+ #define MSG_ESTEPS "Esteps/mm"
+ #define MSG_RECTRACT "Veda takaisin"
+ #define MSG_TEMPERATURE "Lampotila"
+ #define MSG_MOTION "Liike"
+ #define MSG_STORE_EPROM "Tallenna muistiin"
+ #define MSG_LOAD_EPROM "Lataa muistista"
+ #define MSG_RESTORE_FAILSAFE "Palauta oletus"
+ #define MSG_REFRESH "Paivita"
+ #define MSG_WATCH "Seuraa"
+ #define MSG_PREPARE "Valmistele"
+ #define MSG_TUNE "Saada"
+ #define MSG_PAUSE_PRINT "Keskeyta tulostus"
+ #define MSG_RESUME_PRINT "Jatka tulostusta"
+ #define MSG_STOP_PRINT "Pysayta tulostus"
+ #define MSG_CARD_MENU "Korttivalikko"
+ #define MSG_NO_CARD "Ei korttia"
+ #define MSG_DWELL "Nukkumassa..."
+ #define MSG_USERWAIT "Odotetaan valintaa..."
+ #define MSG_RESUMING "Jatketaan tulostusta"
+ #define MSG_NO_MOVE "Ei liiketta."
+ #define MSG_KILLED "KILLED. "
+ #define MSG_STOPPED "STOPPED. "
+ #define MSG_CONTROL_RETRACT "Veda mm"
+ #define MSG_CONTROL_RETRACTF "Veda F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
+ #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
+ #define MSG_AUTORETRACT "AutoVeto."
+ #define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+ #define MSG_Enqueing "jonoon \""
+ #define MSG_POWERUP "Kaynnistys"
+ #define MSG_EXTERNAL_RESET " Ulkoinen Reset"
+ #define MSG_BROWNOUT_RESET " Alajannite Reset"
+ #define MSG_WATCHDOG_RESET " Vahtikoira Reset"
+ #define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
+ #define MSG_MARLIN "Marlin "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
+ #define MSG_FREE_MEMORY " Vapaata muistia: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Tiedosto tallennettu."
+ #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
+ #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
+ #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
+ #define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
+ #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
+ #define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
+ #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
+ #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
+ #define MSG_HEATING "Lammitan..."
+ #define MSG_HEATING_COMPLETE "Lammitys valmis."
+ #define MSG_BED_HEATING "Alusta lampiaa."
+ #define MSG_BED_DONE "Alusta valmis."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+ #define MSG_COUNT_X " Laskuri X: "
+ #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
+ #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
+ #define MSG_RESEND "Uudelleenlahetys: "
+ #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
+ #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
+ #define MSG_INVALID_EXTRUDER "Virheellinen suutin"
+ #define MSG_X_MIN "x_min: "
+ #define MSG_X_MAX "x_max: "
+ #define MSG_Y_MIN "y_min: "
+ #define MSG_Y_MAX "y_max: "
+ #define MSG_Z_MIN "z_min: "
+ #define MSG_Z_MAX "z_max: "
+ #define MSG_M119_REPORT "Rajakytkimien tilaraportti"
+ #define MSG_ENDSTOP_HIT "AKTIIVISENA"
+ #define MSG_ENDSTOP_OPEN "avoinna"
+ #define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+ #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
+ #define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
+ #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
+ #define MSG_SD_CARD_OK "SD kortti ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
+ #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
+ #define MSG_SD_FILE_OPENED "Tiedosto avattu: "
+ #define MSG_SD_SIZE " Koko: "
+ #define MSG_SD_FILE_SELECTED "Tiedosto valittu"
+ #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
+ #define MSG_SD_PRINTING_BYTE "SD tulostus byte "
+ #define MSG_SD_NOT_PRINTING "Ei SD tulostus"
+ #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
+
+ #define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: "
+ #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
+
+#endif
+#endif // ifndef LANGUAGE_H
\ No newline at end of file