Fysetc S6 support (#15850)
This commit is contained in:
George Fu
Scott Lahteine
parent
1cea1687f3
commit
cf1e19d167
@ -302,6 +302,7 @@
|
|||||||
#define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407ZG)
|
#define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407ZG)
|
||||||
#define BOARD_LERDGE_X 4210 // Lerdge X (STM32F407VE)
|
#define BOARD_LERDGE_X 4210 // Lerdge X (STM32F407VE)
|
||||||
#define BOARD_VAKE403D 4211 // VAkE 403D (STM32F446VET6)
|
#define BOARD_VAKE403D 4211 // VAkE 403D (STM32F446VET6)
|
||||||
|
#define BOARD_FYSETC_S6 4212 // FYSETC S6 board
|
||||||
|
|
||||||
//
|
//
|
||||||
// ARM Cortex M7
|
// ARM Cortex M7
|
||||||
|
|||||||
@ -523,6 +523,8 @@
|
|||||||
#include "stm32/pins_LERDGE_X.h" // STM32F4 env:STM32F4
|
#include "stm32/pins_LERDGE_X.h" // STM32F4 env:STM32F4
|
||||||
#elif MB(VAKE403D)
|
#elif MB(VAKE403D)
|
||||||
#include "stm32/pins_VAKE403D.h" // STM32F4 env:STM32F4
|
#include "stm32/pins_VAKE403D.h" // STM32F4 env:STM32F4
|
||||||
|
#elif MB(FYSETC_S6)
|
||||||
|
#include "stm32/pins_FYSETC_S6.h" // STM32F4 env:FYSETC_S6
|
||||||
|
|
||||||
//
|
//
|
||||||
// ARM Cortex M7
|
// ARM Cortex M7
|
||||||
|
|||||||
234
Marlin/src/pins/stm32/pins_FYSETC_S6.h
Normal file
234
Marlin/src/pins/stm32/pins_FYSETC_S6.h
Normal file
@ -0,0 +1,234 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#ifndef STM32F4
|
||||||
|
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
||||||
|
#elif HOTENDS > 3 || E_STEPPERS > 3
|
||||||
|
#error "RUMBA32 supports up to 3 hotends / E-steppers."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef BOARD_INFO_NAME
|
||||||
|
#define BOARD_INFO_NAME "FYSETC_S6"
|
||||||
|
#endif
|
||||||
|
#ifndef DEFAULT_MACHINE_NAME
|
||||||
|
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// change the prio to 3 , 2 is for software serial
|
||||||
|
//#define TEMP_TIMER_IRQ_PRIO 3
|
||||||
|
|
||||||
|
//
|
||||||
|
// EEPROM Emulation
|
||||||
|
//
|
||||||
|
#define FLASH_EEPROM_EMULATION
|
||||||
|
//#define SRAM_EEPROM_EMULATION
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_MIN_PIN PB14
|
||||||
|
#define X_MAX_PIN PA1
|
||||||
|
#define Y_MIN_PIN PB13
|
||||||
|
#define Y_MAX_PIN PA2
|
||||||
|
#define Z_MIN_PIN PA0
|
||||||
|
#define Z_MAX_PIN PA3
|
||||||
|
|
||||||
|
//
|
||||||
|
// Servos
|
||||||
|
// share with Z_MAX_PIN
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN PA3
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN PE11
|
||||||
|
#define X_DIR_PIN PE10
|
||||||
|
#define X_ENABLE_PIN PE12
|
||||||
|
#define X_CS_PIN PE7
|
||||||
|
|
||||||
|
#define Y_STEP_PIN PD8
|
||||||
|
#define Y_DIR_PIN PB12
|
||||||
|
#define Y_ENABLE_PIN PD9
|
||||||
|
#define Y_CS_PIN PE15
|
||||||
|
|
||||||
|
#define Z_STEP_PIN PD14
|
||||||
|
#define Z_DIR_PIN PD13
|
||||||
|
#define Z_ENABLE_PIN PD15
|
||||||
|
#define Z_CS_PIN PD10
|
||||||
|
|
||||||
|
#define E0_STEP_PIN PD5
|
||||||
|
#define E0_DIR_PIN PD6
|
||||||
|
#define E0_ENABLE_PIN PD4
|
||||||
|
#define E0_CS_PIN PD7
|
||||||
|
|
||||||
|
#define E1_STEP_PIN PE6
|
||||||
|
#define E1_DIR_PIN PC13
|
||||||
|
#define E1_ENABLE_PIN PE5
|
||||||
|
#define E1_CS_PIN PC14
|
||||||
|
|
||||||
|
#define E2_STEP_PIN PE2
|
||||||
|
#define E2_DIR_PIN PE4
|
||||||
|
#define E2_ENABLE_PIN PE3
|
||||||
|
#define E2_CS_PIN PC15
|
||||||
|
|
||||||
|
#if HAS_TMC220x
|
||||||
|
/**
|
||||||
|
* TMC2208/TMC2209 stepper drivers
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
//
|
||||||
|
// Software serial
|
||||||
|
//
|
||||||
|
#define X_SERIAL_TX_PIN PE9
|
||||||
|
#define X_SERIAL_RX_PIN PE8
|
||||||
|
|
||||||
|
#define Y_SERIAL_TX_PIN PE14
|
||||||
|
#define Y_SERIAL_RX_PIN PE13
|
||||||
|
|
||||||
|
#define Z_SERIAL_TX_PIN PD11
|
||||||
|
#define Z_SERIAL_RX_PIN PD12
|
||||||
|
|
||||||
|
#define E0_SERIAL_TX_PIN PD3
|
||||||
|
#define E0_SERIAL_RX_PIN PA15
|
||||||
|
|
||||||
|
#define E1_SERIAL_TX_PIN PC4
|
||||||
|
#define E1_SERIAL_RX_PIN PC5
|
||||||
|
|
||||||
|
#define E2_SERIAL_TX_PIN PE1
|
||||||
|
#define E2_SERIAL_RX_PIN PE0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
//
|
||||||
|
#define TEMP_0_PIN PC0
|
||||||
|
#define TEMP_1_PIN PC1
|
||||||
|
#define TEMP_2_PIN PC2
|
||||||
|
#define TEMP_BED_PIN PC3
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#define HEATER_0_PIN PB3
|
||||||
|
#define HEATER_1_PIN PB4
|
||||||
|
#define HEATER_2_PIN PB15
|
||||||
|
#define HEATER_BED_PIN PC8
|
||||||
|
|
||||||
|
#define FAN_PIN PB0
|
||||||
|
#define FAN1_PIN PB1
|
||||||
|
#define FAN2_PIN PB2
|
||||||
|
|
||||||
|
//
|
||||||
|
// SPI
|
||||||
|
//
|
||||||
|
#define SCK_PIN PA5
|
||||||
|
#define MISO_PIN PA6
|
||||||
|
#define MOSI_PIN PA7
|
||||||
|
|
||||||
|
//
|
||||||
|
// Misc. Functions
|
||||||
|
//
|
||||||
|
//#define LED_PIN PB14
|
||||||
|
//#define BTN_PIN PC10
|
||||||
|
//#define PS_ON_PIN PE11
|
||||||
|
//#define KILL_PIN PC5
|
||||||
|
|
||||||
|
#define SDSS PA4
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD / Controller
|
||||||
|
//
|
||||||
|
|
||||||
|
#define BEEPER_PIN PC9
|
||||||
|
#define SD_DETECT_PIN PB10
|
||||||
|
|
||||||
|
#if ENABLED(FYSETC_MINI_12864)
|
||||||
|
//
|
||||||
|
// See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||||
|
//
|
||||||
|
#define DOGLCD_A0 PD2
|
||||||
|
#define DOGLCD_CS PC11
|
||||||
|
|
||||||
|
//#define LCD_BACKLIGHT_PIN -1
|
||||||
|
//#define KILL_PIN -1
|
||||||
|
|
||||||
|
#define LCD_RESET_PIN PC10 // Must be high or open for LCD to operate normally.
|
||||||
|
// Seems to work best if left open.
|
||||||
|
|
||||||
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||||
|
#ifndef RGB_LED_R_PIN
|
||||||
|
#define RGB_LED_R_PIN PC12
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_G_PIN
|
||||||
|
#define RGB_LED_G_PIN PD0
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_B_PIN
|
||||||
|
#define RGB_LED_B_PIN PD1
|
||||||
|
#endif
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
|
#define NEOPIXEL_PIN PC12
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif HAS_GRAPHICAL_LCD
|
||||||
|
#define LCD_PINS_RS PD2
|
||||||
|
#define LCD_PINS_ENABLE PC11
|
||||||
|
#define LCD_PINS_D4 PC10
|
||||||
|
#define LCD_PINS_D5 PC12
|
||||||
|
#define LCD_PINS_D6 PD0
|
||||||
|
#define LCD_PINS_D7 PD1
|
||||||
|
|
||||||
|
#if ENABLED(MKS_MINI_12864)
|
||||||
|
#define DOGLCD_CS PC12
|
||||||
|
#define DOGLCD_A0 PD0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(NEWPANEL)
|
||||||
|
#define BTN_EN1 PC6
|
||||||
|
#define BTN_EN2 PC7
|
||||||
|
#define BTN_ENC PA8
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Alter timing for graphical display
|
||||||
|
#if HAS_GRAPHICAL_LCD
|
||||||
|
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
|
||||||
|
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
|
||||||
|
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef RGB_LED_R_PIN
|
||||||
|
#define RGB_LED_R_PIN PB6
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_G_PIN
|
||||||
|
#define RGB_LED_G_PIN PB5
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_B_PIN
|
||||||
|
#define RGB_LED_B_PIN PB7
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_W_PIN
|
||||||
|
#define RGB_LED_W_PIN -1
|
||||||
|
#endif
|
||||||
|
|
||||||
35
buildroot/share/PlatformIO/boards/fysetc_s6.json
Normal file
35
buildroot/share/PlatformIO/boards/fysetc_s6.json
Normal file
@ -0,0 +1,35 @@
|
|||||||
|
{
|
||||||
|
"build": {
|
||||||
|
"cpu": "cortex-m4",
|
||||||
|
"extra_flags": "-DSTM32F446xx",
|
||||||
|
"f_cpu": "180000000L",
|
||||||
|
"mcu": "stm32f446ret6",
|
||||||
|
"variant": "FYSETC_S6"
|
||||||
|
},
|
||||||
|
"connectivity": [
|
||||||
|
"can"
|
||||||
|
],
|
||||||
|
"debug": {
|
||||||
|
"jlink_device": "STM32F446RE",
|
||||||
|
"openocd_target": "stm32f4x",
|
||||||
|
"svd_path": "STM32F446x.svd"
|
||||||
|
},
|
||||||
|
"frameworks": [
|
||||||
|
"arduino",
|
||||||
|
"stm32cube"
|
||||||
|
],
|
||||||
|
"name": "3D Printer control board",
|
||||||
|
"upload": {
|
||||||
|
"maximum_ram_size": 131072,
|
||||||
|
"maximum_size": 524288,
|
||||||
|
"protocol": "stlink",
|
||||||
|
"protocols": [
|
||||||
|
"jlink",
|
||||||
|
"stlink",
|
||||||
|
"blackmagic",
|
||||||
|
"serial"
|
||||||
|
]
|
||||||
|
},
|
||||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html",
|
||||||
|
"vendor": "FYSETC"
|
||||||
|
}
|
||||||
55
buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
Normal file
55
buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
Normal file
@ -0,0 +1,55 @@
|
|||||||
|
from os.path import join
|
||||||
|
Import("env", "projenv")
|
||||||
|
|
||||||
|
import os,shutil
|
||||||
|
from SCons.Script import DefaultEnvironment
|
||||||
|
from platformio import util
|
||||||
|
|
||||||
|
env = DefaultEnvironment()
|
||||||
|
platform = env.PioPlatform()
|
||||||
|
board = env.BoardConfig()
|
||||||
|
|
||||||
|
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32")
|
||||||
|
#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327")
|
||||||
|
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS")
|
||||||
|
assert os.path.isdir(FRAMEWORK_DIR)
|
||||||
|
assert os.path.isdir(CMSIS_DIR)
|
||||||
|
assert os.path.isdir("buildroot/share/PlatformIO/variants")
|
||||||
|
|
||||||
|
mcu_type = board.get("build.mcu")[:-2]
|
||||||
|
variant = board.get("build.variant")
|
||||||
|
series = mcu_type[:7].upper() + "xx"
|
||||||
|
variant_dir = os.path.join(FRAMEWORK_DIR, "variants", variant)
|
||||||
|
|
||||||
|
source_dir = os.path.join("buildroot/share/PlatformIO/variants", variant)
|
||||||
|
assert os.path.isdir(source_dir)
|
||||||
|
|
||||||
|
if not os.path.isdir(variant_dir):
|
||||||
|
os.mkdir(variant_dir)
|
||||||
|
|
||||||
|
for file_name in os.listdir(source_dir):
|
||||||
|
full_file_name = os.path.join(source_dir, file_name)
|
||||||
|
if os.path.isfile(full_file_name):
|
||||||
|
shutil.copy(full_file_name, variant_dir)
|
||||||
|
|
||||||
|
# Relocate firmware from 0x08000000 to 0x08002000
|
||||||
|
#env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728))
|
||||||
|
#env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000"))
|
||||||
|
#env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/fysetc_aio_ii.ld")
|
||||||
|
|
||||||
|
# Custom HEX from ELF
|
||||||
|
env.AddPostAction(
|
||||||
|
"$BUILD_DIR/${PROGNAME}.elf",
|
||||||
|
env.VerboseAction(" ".join([
|
||||||
|
"$OBJCOPY",
|
||||||
|
"-O",
|
||||||
|
"ihex",
|
||||||
|
"$BUILD_DIR/${PROGNAME}.elf",
|
||||||
|
"$BUILD_DIR/${PROGNAME}.hex"
|
||||||
|
]), "Building $TARGET"))
|
||||||
|
|
||||||
|
# In-line command with arguments
|
||||||
|
env.Replace(
|
||||||
|
UPLOADER=platform.get_package_dir("tool-stm32duino") + '/stm32flash/stm32flash',
|
||||||
|
UPLOADCMD='"${UPLOADER}" -v -i rts,-dtr,dtr,-rts -R -b 115200 -g 0x8000000 -w "${BUILD_DIR}/${PROGNAME}.hex" ${UPLOAD_PORT}'
|
||||||
|
)
|
||||||
361
buildroot/share/PlatformIO/variants/FYSETC_S6/PeripheralPins.c
Normal file
361
buildroot/share/PlatformIO/variants/FYSETC_S6/PeripheralPins.c
Normal file
@ -0,0 +1,361 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2016, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
// =====
|
||||||
|
// Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
// If you change them, you will have to know what you do
|
||||||
|
// =====
|
||||||
|
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_ADC[] = {
|
||||||
|
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||||
|
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||||
|
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||||
|
// {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||||
|
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||||
|
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||||
|
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||||
|
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||||
|
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||||
|
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||||
|
// {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||||
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||||
|
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||||
|
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||||
|
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||||
|
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||||
|
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||||
|
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||||
|
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||||
|
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||||
|
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||||
|
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||||
|
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||||
|
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||||
|
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||||
|
// {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||||
|
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||||
|
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||||
|
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||||
|
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||||
|
// {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||||
|
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||||
|
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||||
|
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||||
|
// {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||||
|
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||||
|
// {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||||
|
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||||
|
// {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** DAC ***
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_DAC[] = {
|
||||||
|
// {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||||
|
// {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - LD2
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
// {PC_7, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
|
||||||
|
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
// {PC_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
// {PC_6, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||||
|
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||||
|
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - STLink Tx
|
||||||
|
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 - STLink Tx
|
||||||
|
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - STLink Tx
|
||||||
|
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - STLink Rx
|
||||||
|
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - STLink Rx
|
||||||
|
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - STLink Rx
|
||||||
|
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
// {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||||
|
{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||||
|
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||||
|
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
// {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||||
|
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||||
|
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||||
|
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||||
|
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||||
|
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||||
|
{PB_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||||
|
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||||
|
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||||
|
// {PB_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||||
|
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||||
|
// {PB_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||||
|
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
// {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||||
|
{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||||
|
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
// {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||||
|
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
// {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||||
|
// {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||||
|
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
// {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||||
|
// {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||||
|
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||||
|
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||||
|
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_UART_TX[] = {
|
||||||
|
// {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
// {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_UART_RX[] = {
|
||||||
|
// {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
// {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_UART_RTS[] = {
|
||||||
|
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_UART_CTS[] = {
|
||||||
|
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
// {PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
// {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_0, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||||
|
// {PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||||
|
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
|
||||||
|
// {PC_1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
|
||||||
|
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
// {PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
|
||||||
|
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
// {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** CAN ***
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_CAN_RD[] = {
|
||||||
|
// {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
// {PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||||
|
// {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
// {PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_CAN_TD[] = {
|
||||||
|
// {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
// {PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||||
|
// {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
// {PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** ETHERNET ***
|
||||||
|
|
||||||
|
//*** No Ethernet ***
|
||||||
|
|
||||||
|
//*** QUADSPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_QUADSPI[] = {
|
||||||
|
// {PA_1, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO3
|
||||||
|
// {PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_CLK
|
||||||
|
// {PB_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QSPI)}, // QUADSPI_BK1_NCS
|
||||||
|
// {PC_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO0
|
||||||
|
// {PC_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO1
|
||||||
|
// {PC_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK2_NCS
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** USB ***
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_USB_OTG_FS[] = {
|
||||||
|
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||||
|
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)}, // USB_OTG_FS_VBUS
|
||||||
|
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||||
|
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||||
|
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
const PinMap PinMap_USB_OTG_HS[] = {
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
30
buildroot/share/PlatformIO/variants/FYSETC_S6/PinNamesVar.h
Normal file
30
buildroot/share/PlatformIO/variants/FYSETC_S6/PinNamesVar.h
Normal file
@ -0,0 +1,30 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#ifdef PWR_WAKEUP_PIN1
|
||||||
|
SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
||||||
|
/* USB */
|
||||||
|
#ifdef USBCON
|
||||||
|
USB_OTG_FS_DM = PA_11,
|
||||||
|
USB_OTG_FS_DP = PA_12,
|
||||||
|
#endif
|
||||||
189
buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
Normal file
189
buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
Normal file
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32F407VETx Device with
|
||||||
|
** 512KByte FLASH, 128KByte RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed as is, without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20020000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200;; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400;; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
FLASH (rx) : ORIGIN = 0x8010000, LENGTH = 512K
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text ALIGN(4):
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata ALIGN(4):
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
/*_siccmram = LOADADDR(.ccmram);*/
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
201
buildroot/share/PlatformIO/variants/FYSETC_S6/variant.cpp
Normal file
201
buildroot/share/PlatformIO/variants/FYSETC_S6/variant.cpp
Normal file
@ -0,0 +1,201 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Pin number
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PA_0, //D0
|
||||||
|
PA_1, //D1
|
||||||
|
PA_2, //D2
|
||||||
|
PA_3, //D3
|
||||||
|
PA_4, //D4
|
||||||
|
PA_5, //D5
|
||||||
|
PA_6, //D6
|
||||||
|
PA_7, //D7
|
||||||
|
PA_8, //D8
|
||||||
|
PA_9, //D9
|
||||||
|
PA_10, //D10
|
||||||
|
PA_11, //D11
|
||||||
|
PA_12, //D12
|
||||||
|
PA_13, //D13
|
||||||
|
PA_14, //D14
|
||||||
|
PA_15, //D15
|
||||||
|
PB_0, //D16
|
||||||
|
PB_1, //D17
|
||||||
|
PB_2, //D18
|
||||||
|
PB_3, //D19
|
||||||
|
PB_4, //D20
|
||||||
|
PB_5, //D21
|
||||||
|
PB_6, //D22
|
||||||
|
PB_7, //D23
|
||||||
|
PB_8, //D24
|
||||||
|
PB_9, //D25
|
||||||
|
PB_10, //D26
|
||||||
|
PB_11, //D27
|
||||||
|
PB_12, //D28
|
||||||
|
PB_13, //D29
|
||||||
|
PB_14, //D30
|
||||||
|
PB_15, //D31
|
||||||
|
PC_0, //D32
|
||||||
|
PC_1, //D33
|
||||||
|
PC_2, //D34
|
||||||
|
PC_3, //D35
|
||||||
|
PC_4, //D36
|
||||||
|
PC_5, //D37
|
||||||
|
PC_6, //D38
|
||||||
|
PC_7, //D39
|
||||||
|
PC_8, //D40
|
||||||
|
PC_9, //D41
|
||||||
|
PC_10, //D42
|
||||||
|
PC_11, //D43
|
||||||
|
PC_12, //D44
|
||||||
|
PC_13, //D45
|
||||||
|
PC_14, //D46
|
||||||
|
PC_15, //D47
|
||||||
|
PD_0, //D48
|
||||||
|
PD_1, //D49
|
||||||
|
PD_2, //D50
|
||||||
|
PD_3, //D51
|
||||||
|
PD_4, //D52
|
||||||
|
PD_5, //D53
|
||||||
|
PD_6, //D54
|
||||||
|
PD_7, //D55
|
||||||
|
PD_8, //D56
|
||||||
|
PD_9, //D57
|
||||||
|
PD_10, //D58
|
||||||
|
PD_11, //D59
|
||||||
|
PD_12, //D60
|
||||||
|
PD_13, //D61
|
||||||
|
PD_14, //D62
|
||||||
|
PD_15, //D63
|
||||||
|
PE_0, //D64
|
||||||
|
PE_1, //D65
|
||||||
|
PE_2, //D66
|
||||||
|
PE_3, //D67
|
||||||
|
PE_4, //D68
|
||||||
|
PE_5, //D69
|
||||||
|
PE_6, //D70
|
||||||
|
PE_7, //D71
|
||||||
|
PE_8, //D72
|
||||||
|
PE_9, //D73
|
||||||
|
PE_10, //D74
|
||||||
|
PE_11, //D75
|
||||||
|
PE_12, //D76
|
||||||
|
PE_13, //D77
|
||||||
|
PE_14, //D78
|
||||||
|
PE_15, //D79
|
||||||
|
|
||||||
|
//Duplicated ADC Pins
|
||||||
|
PA_3, //D80/A0
|
||||||
|
PA_4, //D81/A1
|
||||||
|
PC_0, //D82/A2
|
||||||
|
PC_1, //D83/A3
|
||||||
|
PC_2, //D84/A4
|
||||||
|
PC_3, //D85/A5
|
||||||
|
PC_4 //D86/A6
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = PLL (HSE)
|
||||||
|
* SYSCLK(Hz) = 180000000
|
||||||
|
* HCLK(Hz) = 180000000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 4
|
||||||
|
* APB2 Prescaler = 2
|
||||||
|
* HSE Frequency(Hz) = 12000000
|
||||||
|
* PLL_M = 6
|
||||||
|
* PLL_N = 180
|
||||||
|
* PLL_P = 2
|
||||||
|
* PLL_Q = 7
|
||||||
|
* VDD(V) = 3.3
|
||||||
|
* Main regulator output voltage = Scale1 mode
|
||||||
|
* Flash Latency(WS) = 5
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
||||||
|
|
||||||
|
|
||||||
|
/* Enable Power Control clock */
|
||||||
|
__HAL_RCC_PWR_CLK_ENABLE();
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||||
|
clocked below the maximum system frequency, to update the voltage scaling value
|
||||||
|
regarding system frequency refer to product datasheet. */
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
|
RCC_OscInitStruct.PLL.PLLM = 6;
|
||||||
|
RCC_OscInitStruct.PLL.PLLN = 180;
|
||||||
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||||
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||||
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||||
|
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||||
|
|
||||||
|
HAL_PWREx_EnableOverDrive();
|
||||||
|
|
||||||
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||||
|
clocks dividers */
|
||||||
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
|
||||||
|
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLRCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||||
|
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
|
||||||
|
|
||||||
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
|
||||||
|
PeriphClkInitStruct.PLLSAI.PLLSAIM = 6;
|
||||||
|
PeriphClkInitStruct.PLLSAI.PLLSAIN = 96;
|
||||||
|
PeriphClkInitStruct.PLLSAI.PLLSAIQ = 2;
|
||||||
|
PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV4;
|
||||||
|
PeriphClkInitStruct.PLLSAIDivQ = 1;
|
||||||
|
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLSAIP;
|
||||||
|
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
181
buildroot/share/PlatformIO/variants/FYSETC_S6/variant.h
Normal file
181
buildroot/share/PlatformIO/variants/FYSETC_S6/variant.h
Normal file
@ -0,0 +1,181 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _VARIANT_ARDUINO_STM32_
|
||||||
|
#define _VARIANT_ARDUINO_STM32_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Pins
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define PA0 0 //D0
|
||||||
|
#define PA1 1 //D1
|
||||||
|
#define PA2 2 //D2
|
||||||
|
#define PA3 3 //D3
|
||||||
|
#define PA4 4 //D4
|
||||||
|
#define PA5 5 //D5
|
||||||
|
#define PA6 6 //D6
|
||||||
|
#define PA7 7 //D7
|
||||||
|
#define PA8 8 //D8
|
||||||
|
#define PA9 9 //D9
|
||||||
|
#define PA10 10 //D10
|
||||||
|
#define PA11 11 //D11
|
||||||
|
#define PA12 12 //D12
|
||||||
|
#define PA13 13 //D13
|
||||||
|
#define PA14 14 //D14
|
||||||
|
#define PA15 15 //D15
|
||||||
|
#define PB0 16 //D16
|
||||||
|
#define PB1 17 //D17
|
||||||
|
#define PB2 18 //D18
|
||||||
|
#define PB3 19 //D19
|
||||||
|
#define PB4 20 //D20
|
||||||
|
#define PB5 21 //D21
|
||||||
|
#define PB6 22 //D22
|
||||||
|
#define PB7 23 //D23
|
||||||
|
#define PB8 24 //D24
|
||||||
|
#define PB9 25 //D25
|
||||||
|
#define PB10 26 //D26
|
||||||
|
#define PB11 27 //D27
|
||||||
|
#define PB12 28 //D28
|
||||||
|
#define PB13 29 //D29
|
||||||
|
#define PB14 30 //D30
|
||||||
|
#define PB15 31 //D31
|
||||||
|
#define PC0 32 //D32
|
||||||
|
#define PC1 33 //D33
|
||||||
|
#define PC2 34 //D34
|
||||||
|
#define PC3 35 //D35
|
||||||
|
#define PC4 36 //D36
|
||||||
|
#define PC5 37 //D37
|
||||||
|
#define PC6 38 //D38
|
||||||
|
#define PC7 39 //D39
|
||||||
|
#define PC8 40 //D40
|
||||||
|
#define PC9 41 //D41
|
||||||
|
#define PC10 42 //D42
|
||||||
|
#define PC11 43 //D43
|
||||||
|
#define PC12 44 //D44
|
||||||
|
#define PC13 45 //D45
|
||||||
|
#define PC14 46 //D46
|
||||||
|
#define PC15 47 //D47
|
||||||
|
#define PD0 48 //D48
|
||||||
|
#define PD1 49 //D49
|
||||||
|
#define PD2 50 //D50
|
||||||
|
#define PD3 51 //D51
|
||||||
|
#define PD4 52 //D52
|
||||||
|
#define PD5 53 //D53
|
||||||
|
#define PD6 54 //D54
|
||||||
|
#define PD7 55 //D55
|
||||||
|
#define PD8 56 //D56
|
||||||
|
#define PD9 57 //D57
|
||||||
|
#define PD10 58 //D58
|
||||||
|
#define PD11 59 //D59
|
||||||
|
#define PD12 60 //D60
|
||||||
|
#define PD13 61 //D61
|
||||||
|
#define PD14 62 //D62
|
||||||
|
#define PD15 63 //D63
|
||||||
|
#define PE0 64 //D64
|
||||||
|
#define PE1 65 //D65
|
||||||
|
#define PE2 66 //D66
|
||||||
|
#define PE3 67 //D67
|
||||||
|
#define PE4 68 //D68
|
||||||
|
#define PE5 69 //D69
|
||||||
|
#define PE6 70 //D70
|
||||||
|
#define PE7 71 //D71
|
||||||
|
#define PE8 72 //D72
|
||||||
|
#define PE9 73 //D73
|
||||||
|
#define PE10 74 //D74
|
||||||
|
#define PE11 75 //D75
|
||||||
|
#define PE12 76 //D76
|
||||||
|
#define PE13 77 //D77
|
||||||
|
#define PE14 78 //D78
|
||||||
|
#define PE15 79 //D79
|
||||||
|
|
||||||
|
// This must be a literal with the same value as PEND
|
||||||
|
#define NUM_DIGITAL_PINS 87
|
||||||
|
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||||
|
#define NUM_ANALOG_INPUTS 7
|
||||||
|
#define NUM_ANALOG_FIRST 80
|
||||||
|
|
||||||
|
// PWM resolution
|
||||||
|
#define PWM_RESOLUTION 8
|
||||||
|
#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans
|
||||||
|
#define PWM_MAX_DUTY_CYCLE 255
|
||||||
|
|
||||||
|
// SPI Definitions
|
||||||
|
#define PIN_SPI_SS PA4
|
||||||
|
#define PIN_SPI_MOSI PA7
|
||||||
|
#define PIN_SPI_MISO PA6
|
||||||
|
#define PIN_SPI_SCK PA5
|
||||||
|
|
||||||
|
// I2C Definitions
|
||||||
|
#define PIN_WIRE_SDA PB9
|
||||||
|
#define PIN_WIRE_SCL PB8
|
||||||
|
|
||||||
|
// Timer Definitions
|
||||||
|
// Do not use timer used by PWM pin. See PinMap_PWM.
|
||||||
|
#define TIMER_TONE TIM6
|
||||||
|
#define TIMER_SERVO TIM14
|
||||||
|
#define TIMER_SERIAL TIM7
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
//#define SERIAL_UART_INSTANCE 1 // Connected to EXP3 header
|
||||||
|
/* Enable Serial 3 */
|
||||||
|
#define HAVE_HWSERIAL1
|
||||||
|
#define HAVE_HWSERIAL3
|
||||||
|
|
||||||
|
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||||
|
// Mandatory for Firmata
|
||||||
|
#define PIN_SERIAL_RX PA10
|
||||||
|
#define PIN_SERIAL_TX PA9
|
||||||
|
|
||||||
|
/* HAL configuration */
|
||||||
|
#define HSE_VALUE 12000000U
|
||||||
|
|
||||||
|
#define FLASH_PAGE_SIZE ((uint32_t)(4*1024))
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial
|
||||||
|
#define SERIAL_PORT_HARDWARE_OPEN Serial
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||||
2210
config/examples/FYSETC/S6/Configuration.h
Normal file
2210
config/examples/FYSETC/S6/Configuration.h
Normal file
File diff suppressed because it is too large
Load Diff
2867
config/examples/FYSETC/S6/Configuration_adv.h
Normal file
2867
config/examples/FYSETC/S6/Configuration_adv.h
Normal file
File diff suppressed because it is too large
Load Diff
@ -395,6 +395,28 @@ lib_ignore = Adafruit NeoPixel, TMCStepper
|
|||||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
|
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
|
||||||
monitor_speed = 250000
|
monitor_speed = 250000
|
||||||
|
|
||||||
|
#
|
||||||
|
# FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
|
||||||
|
#
|
||||||
|
[env:FYSETC_S6]
|
||||||
|
platform = ststm32
|
||||||
|
framework = arduino
|
||||||
|
board = fysetc_s6
|
||||||
|
extra_scripts = buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
|
||||||
|
build_flags = ${common.build_flags}
|
||||||
|
-DTARGET_STM32F4 -std=gnu++14
|
||||||
|
-DVECT_TAB_OFFSET=0x10000
|
||||||
|
-DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED -DUSBD_VID=0x0483 '-DUSB_PRODUCT="FYSETC_S6"'
|
||||||
|
build_unflags = -std=gnu++11
|
||||||
|
lib_deps = ${common.lib_deps}
|
||||||
|
lib_ignore = Arduino-L6470
|
||||||
|
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||||
|
monitor_speed = 250000
|
||||||
|
platform_packages = tool-stm32duino
|
||||||
|
debug_tool = stlink
|
||||||
|
#upload_protocol = stlink
|
||||||
|
upload_protocol = serial
|
||||||
|
|
||||||
#
|
#
|
||||||
# STM32F7 with STM32GENERIC
|
# STM32F7 with STM32GENERIC
|
||||||
#
|
#
|
||||||
@ -412,7 +434,7 @@ monitor_speed = 250000
|
|||||||
# ARMED (STM32)
|
# ARMED (STM32)
|
||||||
#
|
#
|
||||||
[env:ARMED]
|
[env:ARMED]
|
||||||
platform = ststm32@>=5.7.0
|
platform = ststm32
|
||||||
framework = arduino
|
framework = arduino
|
||||||
board = armed_v1
|
board = armed_v1
|
||||||
build_flags = ${common.build_flags}
|
build_flags = ${common.build_flags}
|
||||||
@ -523,7 +545,7 @@ monitor_speed = 250000
|
|||||||
# Shield - https://github.com/jmz52/Hardware
|
# Shield - https://github.com/jmz52/Hardware
|
||||||
#
|
#
|
||||||
[env:STM32F407VE_black]
|
[env:STM32F407VE_black]
|
||||||
platform = ststm32@>=5.7.0
|
platform = ststm32
|
||||||
framework = arduino
|
framework = arduino
|
||||||
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
||||||
board = blackSTM32F407VET6
|
board = blackSTM32F407VET6
|
||||||
@ -541,7 +563,7 @@ monitor_speed = 250000
|
|||||||
# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
|
# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
|
||||||
#
|
#
|
||||||
[env:BIGTREE_SKR_PRO]
|
[env:BIGTREE_SKR_PRO]
|
||||||
platform = ststm32@>=5.7.0
|
platform = ststm32
|
||||||
framework = arduino
|
framework = arduino
|
||||||
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
||||||
board = BigTree_SKR_Pro
|
board = BigTree_SKR_Pro
|
||||||
@ -600,7 +622,7 @@ monitor_speed = 250000
|
|||||||
# Malyan M200 (STM32F103CB)
|
# Malyan M200 (STM32F103CB)
|
||||||
#
|
#
|
||||||
[env:STM32F103CB_malyan]
|
[env:STM32F103CB_malyan]
|
||||||
platform = ststm32@>=5.7.0
|
platform = ststm32
|
||||||
framework = arduino
|
framework = arduino
|
||||||
board = malyanM200
|
board = malyanM200
|
||||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
|
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user