Improve French language (#13851)
This commit is contained in:
Tanguy Pruvot
Scott Lahteine
parent
2740cc64d8
commit
cf3c746029
@ -47,32 +47,32 @@
|
||||
#define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs")
|
||||
#define MSG_DEBUG_MENU _UxGT("Menu debug")
|
||||
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.")
|
||||
#define MSG_AUTO_HOME _UxGT("Origine auto.")
|
||||
#define MSG_AUTO_HOME_X _UxGT("Origine X auto.")
|
||||
#define MSG_AUTO_HOME_Y _UxGT("Origine Y auto.")
|
||||
#define MSG_AUTO_HOME_Z _UxGT("Origine Z auto.")
|
||||
#define MSG_AUTO_Z_ALIGN _UxGT("Align. Z auto.")
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ")
|
||||
#define MSG_AUTO_HOME _UxGT("Origine auto")
|
||||
#define MSG_AUTO_HOME_X _UxGT("Origine X auto")
|
||||
#define MSG_AUTO_HOME_Y _UxGT("Origine Y auto")
|
||||
#define MSG_AUTO_HOME_Z _UxGT("Origine Z auto")
|
||||
#define MSG_AUTO_Z_ALIGN _UxGT("Align. Z auto")
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ...")
|
||||
#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer")
|
||||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant")
|
||||
#define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!")
|
||||
#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissée")
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine")
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal origine")
|
||||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués")
|
||||
#define MSG_SET_ORIGIN _UxGT("Régler origine")
|
||||
#define MSG_PREHEAT_1 _UxGT("Préchauffage " PREHEAT_1_LABEL)
|
||||
#define MSG_PREHEAT_1_N _UxGT("Préchauff. " PREHEAT_1_LABEL " ")
|
||||
#define MSG_PREHEAT_1_ALL _UxGT("Préch. " PREHEAT_1_LABEL " Tout")
|
||||
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse")
|
||||
#define MSG_PREHEAT_1_END _UxGT("Préch. " PREHEAT_1_LABEL " buse")
|
||||
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. " PREHEAT_1_LABEL " lit")
|
||||
#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. préch. " PREHEAT_1_LABEL)
|
||||
#define MSG_PREHEAT_1_SETTINGS _UxGT("Régler préch. " PREHEAT_1_LABEL)
|
||||
#define MSG_PREHEAT_2 _UxGT("Préchauffage " PREHEAT_2_LABEL)
|
||||
#define MSG_PREHEAT_2_N _UxGT("Préchauff. " PREHEAT_2_LABEL " ")
|
||||
#define MSG_PREHEAT_2_ALL _UxGT("Préch. " PREHEAT_2_LABEL " Tout")
|
||||
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse")
|
||||
#define MSG_PREHEAT_2_END _UxGT("Préch. " PREHEAT_2_LABEL " buse")
|
||||
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. " PREHEAT_2_LABEL " lit")
|
||||
#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. préch. " PREHEAT_2_LABEL)
|
||||
#define MSG_PREHEAT_CUSTOM _UxGT("Préchauff. perso.")
|
||||
#define MSG_PREHEAT_2_SETTINGS _UxGT("Régler préch. " PREHEAT_2_LABEL)
|
||||
#define MSG_PREHEAT_CUSTOM _UxGT("Préchauffage perso")
|
||||
#define MSG_COOLDOWN _UxGT("Refroidir")
|
||||
#define MSG_LASER_MENU _UxGT("Contrôle Laser")
|
||||
#define MSG_LASER_OFF _UxGT("Laser Off")
|
||||
@ -84,15 +84,15 @@
|
||||
#define MSG_EXTRUDE _UxGT("Extrusion")
|
||||
#define MSG_RETRACT _UxGT("Retrait")
|
||||
#define MSG_MOVE_AXIS _UxGT("Déplacer un axe")
|
||||
#define MSG_BED_LEVELING _UxGT("Régl. Niv. lit")
|
||||
#define MSG_LEVEL_BED _UxGT("Régl. Niv. lit")
|
||||
#define MSG_BED_LEVELING _UxGT("Régler Niv. lit")
|
||||
#define MSG_LEVEL_BED _UxGT("Niveau du lit")
|
||||
#define MSG_LEVEL_CORNERS _UxGT("Niveau coins")
|
||||
#define MSG_NEXT_CORNER _UxGT("Coin suivant")
|
||||
#define MSG_EDITING_STOPPED _UxGT("Arrêt édit. maillage")
|
||||
#define MSG_MESH_X _UxGT("Index X")
|
||||
#define MSG_MESH_Y _UxGT("Index Y")
|
||||
#define MSG_MESH_EDIT_Z _UxGT("Valeur Z")
|
||||
#define MSG_USER_MENU _UxGT("Commandes perso.")
|
||||
#define MSG_USER_MENU _UxGT("Commandes perso")
|
||||
|
||||
#define MSG_UBL_DOING_G29 _UxGT("G29 en cours")
|
||||
#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord")
|
||||
@ -158,7 +158,7 @@
|
||||
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire")
|
||||
#define MSG_UBL_LOAD_MESH _UxGT("Charger maille")
|
||||
#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille")
|
||||
#define MSG_MESH_LOADED _UxGT("Maille %i charg.")
|
||||
#define MSG_MESH_LOADED _UxGT("Maille %i chargée")
|
||||
#define MSG_MESH_SAVED _UxGT("Maille %i enreg.")
|
||||
#define MSG_NO_STORAGE _UxGT("Pas de mémoire")
|
||||
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL")
|
||||
@ -178,7 +178,7 @@
|
||||
#define MSG_SET_LEDS_VIOLET _UxGT("Violet")
|
||||
#define MSG_SET_LEDS_WHITE _UxGT("Blanc")
|
||||
#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut")
|
||||
#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.")
|
||||
#define MSG_CUSTOM_LEDS _UxGT("LEDs perso.")
|
||||
#define MSG_INTENSITY_R _UxGT("Intensité rouge")
|
||||
#define MSG_INTENSITY_G _UxGT("Intensité vert")
|
||||
#define MSG_INTENSITY_B _UxGT("Intensité bleu")
|
||||
@ -187,14 +187,14 @@
|
||||
|
||||
#define MSG_MOVING _UxGT("Déplacement...")
|
||||
#define MSG_FREE_XY _UxGT("Débloquer XY")
|
||||
#define MSG_MOVE_X _UxGT("Dépl. X")
|
||||
#define MSG_MOVE_Y _UxGT("Dépl. Y")
|
||||
#define MSG_MOVE_Z _UxGT("Dépl. Z")
|
||||
#define MSG_MOVE_X _UxGT("Déplacer X")
|
||||
#define MSG_MOVE_Y _UxGT("Déplacer Y")
|
||||
#define MSG_MOVE_Z _UxGT("Déplacer Z")
|
||||
#define MSG_MOVE_E _UxGT("Extrudeur")
|
||||
#define MSG_HOTEND_TOO_COLD _UxGT("Buse trop froide")
|
||||
#define MSG_MOVE_01MM _UxGT("Dépl. 0.1mm")
|
||||
#define MSG_MOVE_1MM _UxGT("Dépl. 1mm")
|
||||
#define MSG_MOVE_10MM _UxGT("Dépl. 10mm")
|
||||
#define MSG_MOVE_01MM _UxGT("Déplacer 0.1mm")
|
||||
#define MSG_MOVE_1MM _UxGT("Déplacer 1mm")
|
||||
#define MSG_MOVE_10MM _UxGT("Déplacer 10mm")
|
||||
#define MSG_SPEED _UxGT("Vitesse")
|
||||
#define MSG_BED_Z _UxGT("Lit Z")
|
||||
#define MSG_NOZZLE _UxGT("Buse")
|
||||
@ -258,38 +258,38 @@
|
||||
#define MSG_MOTION _UxGT("Mouvement")
|
||||
#define MSG_FILAMENT _UxGT("Filament")
|
||||
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
|
||||
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
|
||||
#define MSG_FILAMENT_UNLOAD _UxGT("Décharger mm")
|
||||
#define MSG_FILAMENT_DIAM _UxGT("Diamètre fil.")
|
||||
#define MSG_FILAMENT_UNLOAD _UxGT("Retrait mm")
|
||||
#define MSG_FILAMENT_LOAD _UxGT("Charger mm")
|
||||
#define MSG_ADVANCE_K _UxGT("Avance K")
|
||||
#define MSG_CONTRAST _UxGT("Contraste LCD")
|
||||
#define MSG_STORE_EEPROM _UxGT("Sauver config")
|
||||
#define MSG_LOAD_EEPROM _UxGT("Lire config")
|
||||
#define MSG_STORE_EEPROM _UxGT("Enregistrer config.")
|
||||
#define MSG_LOAD_EEPROM _UxGT("Charger config.")
|
||||
#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts")
|
||||
#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM")
|
||||
#define MSG_SD_UPDATE _UxGT("MàJ. SD")
|
||||
#define MSG_RESET_PRINTER _UxGT("RàZ. imprimante")
|
||||
#define MSG_SD_UPDATE _UxGT("MaJ Firmware SD")
|
||||
#define MSG_RESET_PRINTER _UxGT("RaZ imprimante")
|
||||
#define MSG_REFRESH _UxGT("Actualiser")
|
||||
#define MSG_WATCH _UxGT("Surveiller")
|
||||
#define MSG_PREPARE _UxGT("Préparer")
|
||||
#define MSG_TUNE _UxGT("Régler")
|
||||
#define MSG_START_PRINT _UxGT("Démarrer Impr.")
|
||||
#define MSG_START_PRINT _UxGT("Démarrer impression")
|
||||
#define MSG_BUTTON_PRINT _UxGT("Imprimer")
|
||||
#define MSG_BUTTON_CANCEL _UxGT("Annuler")
|
||||
#define MSG_PAUSE_PRINT _UxGT("Interrompre impr.")
|
||||
#define MSG_PAUSE_PRINT _UxGT("Pause impression")
|
||||
#define MSG_RESUME_PRINT _UxGT("Reprendre impr.")
|
||||
#define MSG_STOP_PRINT _UxGT("Arrêter impr.")
|
||||
#define MSG_OUTAGE_RECOVERY _UxGT("Récupér. coupure")
|
||||
#define MSG_CARD_MENU _UxGT("Impr. depuis SD")
|
||||
#define MSG_CARD_MENU _UxGT("Impression SD")
|
||||
#define MSG_NO_CARD _UxGT("Pas de carte")
|
||||
#define MSG_DWELL _UxGT("Repos...")
|
||||
#define MSG_USERWAIT _UxGT("Attente utilis.")
|
||||
#define MSG_PRINT_PAUSED _UxGT("Impr. en pause")
|
||||
#define MSG_PRINTING _UxGT("Impression")
|
||||
#define MSG_PRINT_ABORTED _UxGT("Impr. annulée")
|
||||
#define MSG_NO_MOVE _UxGT("Moteurs bloqués.")
|
||||
#define MSG_KILLED _UxGT("MORT.")
|
||||
#define MSG_STOPPED _UxGT("STOPPÉ.")
|
||||
#define MSG_NO_MOVE _UxGT("Moteurs bloqués")
|
||||
#define MSG_KILLED _UxGT("KILLED")
|
||||
#define MSG_STOPPED _UxGT("STOPPÉ")
|
||||
#define MSG_CONTROL_RETRACT _UxGT("Retrait mm")
|
||||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm")
|
||||
#define MSG_CONTROL_RETRACTF _UxGT("Retrait V")
|
||||
@ -298,7 +298,7 @@
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rappel mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V")
|
||||
#define MSG_AUTORETRACT _UxGT("Retrait auto.")
|
||||
#define MSG_AUTORETRACT _UxGT("Retrait auto")
|
||||
#define MSG_TOOL_CHANGE _UxGT("Changement outil")
|
||||
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Augmenter Z")
|
||||
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Vitesse primaire")
|
||||
@ -306,21 +306,21 @@
|
||||
#define MSG_NOZZLE_STANDBY _UxGT("Attente buse")
|
||||
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Distance retrait")
|
||||
#define MSG_FILAMENTCHANGE _UxGT("Changer filament")
|
||||
#define MSG_FILAMENTLOAD _UxGT("Charger fil.")
|
||||
#define MSG_FILAMENTUNLOAD _UxGT("Décharger fil.")
|
||||
#define MSG_FILAMENTLOAD _UxGT("Charger filament")
|
||||
#define MSG_FILAMENTUNLOAD _UxGT("Retrait filament")
|
||||
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout")
|
||||
#define MSG_INIT_SDCARD _UxGT("Init. la carte SD")
|
||||
#define MSG_CHANGE_SDCARD _UxGT("Changer de carte")
|
||||
#define MSG_CHANGE_SDCARD _UxGT("Actualiser carte SD")
|
||||
#define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit")
|
||||
#define MSG_SKEW_FACTOR _UxGT("Facteur écart")
|
||||
#define MSG_BLTOUCH _UxGT("BLTouch")
|
||||
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
|
||||
#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch")
|
||||
#define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BLTouch")
|
||||
#define MSG_BLTOUCH_RESET _UxGT("RaZ BL-Touch")
|
||||
#define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BL-Touch")
|
||||
#define MSG_BLTOUCH_SW_MODE _UxGT("Mode BLTouch SW")
|
||||
#define MSG_BLTOUCH_5V_MODE _UxGT("Mode BLTouch 5V")
|
||||
#define MSG_BLTOUCH_OD_MODE _UxGT("Mode BLTouch OD")
|
||||
#define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch")
|
||||
#define MSG_BLTOUCH_STOW _UxGT("Ranger BL-Touch")
|
||||
#define MSG_MANUAL_DEPLOY _UxGT("Déployer Sonde Z")
|
||||
#define MSG_MANUAL_STOW _UxGT("Ranger Sonde Z")
|
||||
#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
@ -345,7 +345,7 @@
|
||||
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
||||
|
||||
#define MSG_HALTED _UxGT("IMPR. STOPPÉE")
|
||||
#define MSG_PLEASE_RESET _UxGT("RàZ. SVP")
|
||||
#define MSG_PLEASE_RESET _UxGT("Redémarrer SVP")
|
||||
#define MSG_SHORT_DAY _UxGT("j") // One character only
|
||||
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
||||
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
||||
@ -411,7 +411,7 @@
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
|
||||
#define MSG_RUNOUT_SENSOR _UxGT("Capteur Fil.")
|
||||
#define MSG_RUNOUT_SENSOR _UxGT("Capteur fil.")
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine")
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde")
|
||||
#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid")
|
||||
@ -499,7 +499,7 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer fil.")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Chauffer ?")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Chauffage...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Retrait fil...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purge...")
|
||||
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Terminer ?")
|
||||
|
||||
Loading…
Reference in New Issue
Block a user