Printcounter improvements (#11689)

This commit is contained in:
Scott Lahteine 2018-08-31 17:40:39 -05:00 committed by GitHub
parent 6a3207391f
commit d55f44edba
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 12 additions and 18 deletions

View File

@ -1635,4 +1635,8 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m
#error "FAST_PWM_FAN only supported by 8 bit CPUs."
#endif
#if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)
#error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
#endif
#endif // _SANITYCHECK_H_

View File

@ -39,8 +39,6 @@ printStatistics PrintCounter::data;
const PrintCounter::promdress PrintCounter::address = STATS_EEPROM_ADDRESS;
const uint16_t PrintCounter::updateInterval = 10;
const uint16_t PrintCounter::saveInterval = 3600;
millis_t PrintCounter::lastDuration;
bool PrintCounter::loaded = false;
@ -74,7 +72,6 @@ void PrintCounter::initStats() {
data = { 0, 0, 0, 0, 0.0 };
saveStats();
persistentStore.access_start();
persistentStore.write_data(address, (uint8_t)0x16);
persistentStore.access_finish();
@ -166,27 +163,20 @@ void PrintCounter::showStats() {
void PrintCounter::tick() {
if (!isRunning()) return;
static uint32_t update_last = millis(),
eeprom_last = millis();
millis_t now = millis();
// Trying to get the amount of calculations down to the bare min
const static uint16_t i = updateInterval * 1000;
if (now - update_last >= i) {
static uint32_t update_next; // = 0
if (ELAPSED(now, update_next)) {
#if ENABLED(DEBUG_PRINTCOUNTER)
debug(PSTR("tick"));
#endif
data.printTime += deltaDuration();
update_last = now;
update_next = now + updateInterval * 1000;
}
// Trying to get the amount of calculations down to the bare min
const static millis_t j = saveInterval * 1000;
if (now - eeprom_last >= j) {
eeprom_last = now;
static uint32_t eeprom_next; // = 0
if (ELAPSED(now, eeprom_next)) {
eeprom_next = now + saveInterval * 1000;
saveStats();
}
}

View File

@ -72,7 +72,7 @@ class PrintCounter: public Stopwatch {
* @note The max value for this option is 60(s), otherwise integer
* overflow will happen.
*/
static const uint16_t updateInterval;
static constexpr uint16_t updateInterval = 10;
/**
* @brief Interval in seconds between EEPROM saves
@ -80,7 +80,7 @@ class PrintCounter: public Stopwatch {
* EEPROM save cycle, the development team recommends to set this value
* no lower than 3600 secs (1 hour).
*/
static const uint16_t saveInterval;
static constexpr uint16_t saveInterval = 3600;
/**
* @brief Timestamp of the last call to deltaDuration()