diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 8188d5531..f1192cea1 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -833,6 +833,7 @@ #else // Clear probe pin settings when no probe is selected #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #undef USE_PROBE_FOR_Z_HOMING #endif #if Z_HOME_DIR > 0 diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index f99e363d7..93f912e5c 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -382,6 +382,10 @@ #define POLL_JOG #endif +#ifndef HOMING_BUMP_MM + #define HOMING_BUMP_MM { 0, 0, 0 } +#endif + /** * Driver Timings (in nanoseconds) * NOTE: Driver timing order is longest-to-shortest duration. diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index 68cfe6560..6d9d225ef 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -189,7 +189,7 @@ // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 -#endif // TMC2208 || TMC2209 +#endif // HAS_TMC_UART // // Temperature Sensors diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 93890e9aa..3118a521b 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -40,7 +40,6 @@ // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role // - #define DISABLE_DEBUG // @@ -59,6 +58,11 @@ // #define SPI_DEVICE 2 +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + // // Limit Switches // @@ -155,7 +159,7 @@ // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 -#endif // TMC2208 || TMC2209 +#endif // HAS_TMC_UART // // Temperature Sensors @@ -200,8 +204,6 @@ #define FIL_RUNOUT_PIN PA4 #endif -#define SERVO0_PIN PA8 // Enable BLTOUCH - //#define LED_PIN PB2 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index c430671b2..ea3a7a1ee 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -56,6 +56,11 @@ #define SPI_DEVICE 2 +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + // // Limit Switches // @@ -148,8 +153,6 @@ #define FIL_RUNOUT2_PIN PE6 #endif -#define SERVO0_PIN PA8 // Enable BLTOUCH support - //#define LED_PIN PB2 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index 063e548a3..6ef3a0804 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -43,7 +43,6 @@ // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role // - #define DISABLE_DEBUG // @@ -62,6 +61,11 @@ // #define SPI_DEVICE 2 +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + // // Limit Switches // @@ -163,7 +167,7 @@ // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 -#endif // TMC2208 || TMC2209 +#endif // HAS_TMC_UART // // Temperature Sensors @@ -218,8 +222,6 @@ #define FIL_RUNOUT2_PIN PE6 #endif -#define SERVO0_PIN PA8 // Enable BLTOUCH - //#define LED_PIN PB2 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 65aa5cc39..89bb41b19 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -48,7 +48,7 @@ // // Servos // -#define SERVO0_PIN PA8 // BLTOUCH +#define SERVO0_PIN PA8 // Enable BLTOUCH // // Limit Switches diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h index e2b3f2c31..f0fc99e0c 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h @@ -31,8 +31,11 @@ #define BOARD_INFO_NAME "MKS Robin Nano V3" +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT + // Avoid conflict with TIMER_TONE -#define STEP_TIMER 10 +#define STEP_TIMER 10 // Use one of these or SDCard-based Emulation will be used //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation @@ -42,6 +45,12 @@ // // Release PB4 (Z_DIR_PIN) from JTAG NRST role // +//#define DISABLE_DEBUG + +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH // // Limit Switches @@ -98,8 +107,8 @@ // // Software SPI pins for TMC2130 stepper drivers +// This board only supports SW SPI for stepper drivers // -// This board only support SW SPI for stepper drivers #if HAS_TMC_SPI #define TMC_USE_SW_SPI #endif @@ -179,6 +188,7 @@ #define POWER_LOSS_PIN PW_DET #define PS_ON_PIN PW_OFF + // // Enable MKSPWC support // @@ -186,14 +196,13 @@ //#define KILL_PIN PA2 //#define KILL_PIN_INVERTING true -#define SERVO0_PIN PA8 // Enable BLTOUCH support //#define LED_PIN PB2 // Random Info -#define USB_SERIAL -1 //Usb Serial -#define WIFI_SERIAL 3 //USART3 -#define MKS_WIFI_MODULE_SERIAL 1 //USART1 -#define MKS_WIFI_MODULE_SPI 2 //SPI2 +#define USB_SERIAL -1 // USB Serial +#define WIFI_SERIAL 3 // USART3 +#define MKS_WIFI_MODULE_SERIAL 1 // USART1 +#define MKS_WIFI_MODULE_SPI 2 // SPI2 #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD @@ -331,7 +340,7 @@ //#define MKS_LCD12864B //#undef SHOW_BOOTSCREEN - #else // !MKS_MINI_12864 + #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 #if ENABLED(ULTIPANEL) @@ -346,5 +355,3 @@ #endif // !MKS_MINI_12864 #endif // HAS_SPI_LCD - -#define HAS_OTG_USB_HOST_SUPPORT diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index 05648cf12..333634046 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -30,7 +30,7 @@ #define BOARD_INFO_NAME "MKS Robin PRO V2" // Avoid conflict with TIMER_TONE -#define STEP_TIMER 10 +#define STEP_TIMER 10 // Use one of these or SDCard-based Emulation will be used //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation @@ -40,12 +40,18 @@ // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role // +//#define DISABLE_DEBUG // // Note: MKS Robin board is using SPI2 interface. // //#define SPI_MODULE 2 +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + // // Limit Switches // @@ -55,8 +61,6 @@ #define E0_DIAG_PIN PC4 #define E1_DIAG_PIN PE7 -// - #define X_STOP_PIN PA15 #define Y_STOP_PIN PA12 #define Z_MIN_PIN PA11 @@ -159,7 +163,7 @@ // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 -#endif // TMC2208 || TMC2209 +#endif // HAS_TMC_UART // // Temperature Sensors @@ -186,19 +190,18 @@ // // Misc. Functions // -// #define POWER_LOSS_PIN PA2 // PW_DET -// #define PS_ON_PIN PA3 // PW_OFF -// #define SUICIDE_PIN PB2 // Enable MKSPWC support -// #define KILL_PIN PA2 // Enable MKSPWC support -// #define KILL_PIN_INVERTING true // Enable MKSPWC support -#define SERVO0_PIN PA8 // Enable BLTOUCH support +//#define POWER_LOSS_PIN PA2 // PW_DET +//#define PS_ON_PIN PA3 // PW_OFF +//#define SUICIDE_PIN PB2 // Enable MKSPWC support +//#define KILL_PIN PA2 // Enable MKSPWC support +//#define KILL_PIN_INVERTING true // Enable MKSPWC support //#define LED_PIN PB2 #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif -// #define USE_NEW_SPI_API 1 +//#define USE_NEW_SPI_API 1 // // Onboard SD card @@ -243,7 +246,7 @@ // // LCD / Controller #define SPI_FLASH -#define HAS_SPI_FLASH 1 +#define HAS_SPI_FLASH 1 #define SPI_DEVICE 2 #define SPI_FLASH_SIZE 0x1000000 #if ENABLED(SPI_FLASH) @@ -316,7 +319,7 @@ #define LCD_READ_ID 0xD3 #define LCD_USE_DMA_SPI - // #define TFT_DRIVER ST7796 + //#define TFT_DRIVER ST7796 #define TFT_BUFFER_SIZE 14400 #elif HAS_SPI_LCD diff --git a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h index 90dcfc46e..466cce565 100644 --- a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h +++ b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h @@ -36,7 +36,7 @@ // Decrease delays and flash wear by spreading writes across the // 128 kB sector allocated for EEPROM emulation. // Not yet supported on F7 hardware - // #define FLASH_EEPROM_LEVELING + //#define FLASH_EEPROM_LEVELING #endif /** @@ -188,9 +188,6 @@ #define LCD_PINS_RS PF12 // LCD_RS #define LCD_PINS_ENABLE PD15 // LCD_EN #define LCD_PINS_D4 PB13 // LCD_D4 - // #define LCD_PINS_D5 - // #define LCD_PINS_D6 - // #define LCD_PINS_D7 #define BTN_EN1 PF13 // BTN_EN1 #define BTN_EN2 PE9 // BTN_EN2 diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h index e0e8239aa..f7f9e23e9 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h @@ -44,7 +44,7 @@ #undef HAL_IRDA_MODULE_ENABLED #undef HAL_SMARTCARD_MODULE_ENABLED #undef HAL_WWDG_MODULE_ENABLED -#undef HAL_HCD_MODULE_ENABLED +//#undef HAL_HCD_MODULE_ENABLED #undef HAL_FMPI2C_MODULE_ENABLED #undef HAL_SPDIFRX_MODULE_ENABLED #undef HAL_DFSDM_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h index e0e8239aa..f7f9e23e9 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h @@ -44,7 +44,7 @@ #undef HAL_IRDA_MODULE_ENABLED #undef HAL_SMARTCARD_MODULE_ENABLED #undef HAL_WWDG_MODULE_ENABLED -#undef HAL_HCD_MODULE_ENABLED +//#undef HAL_HCD_MODULE_ENABLED #undef HAL_FMPI2C_MODULE_ENABLED #undef HAL_SPDIFRX_MODULE_ENABLED #undef HAL_DFSDM_MODULE_ENABLED diff --git a/buildroot/tests/STM32F103VE_longer-tests b/buildroot/tests/STM32F103VE_longer-tests index c9ef58001..1c90744c0 100755 --- a/buildroot/tests/STM32F103VE_longer-tests +++ b/buildroot/tests/STM32F103VE_longer-tests @@ -11,9 +11,8 @@ opt_enable BAUD_RATE_GCODE exec_test $1 $2 "CLASSIC_UI U20 config" "$3" use_example_configs Alfawise/U20 -opt_enable BAUD_RATE_GCODE -opt_enable TFT_COLOR_UI -opt_disable TFT_CLASSIC_UI +opt_enable BAUD_RATE_GCODE TFT_COLOR_UI +opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE exec_test $1 $2 "COLOR_UI U20 config" "$3" use_example_configs Alfawise/U20-bltouch