Reduce size of heater state print code

This commit is contained in:
Scott Lahteine 2017-06-10 18:59:23 -05:00
parent dde8bb7c8b
commit da8e946efb

View File

@ -5889,7 +5889,7 @@ inline void gcode_M17() {
} }
static bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos, static bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos,
const float &unload_length = 0 , int8_t max_beep_count = 0, bool show_lcd = false const float &unload_length = 0 , const int8_t max_beep_count = 0, const bool show_lcd = false
) { ) {
if (move_away_flag) return false; // already paused if (move_away_flag) return false; // already paused
@ -5989,7 +5989,7 @@ inline void gcode_M17() {
return true; return true;
} }
static void wait_for_filament_reload(int8_t max_beep_count = 0) { static void wait_for_filament_reload(const int8_t max_beep_count = 0) {
bool nozzle_timed_out = false; bool nozzle_timed_out = false;
// Wait for filament insert by user and press button // Wait for filament insert by user and press button
@ -6014,7 +6014,7 @@ inline void gcode_M17() {
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
} }
static void resume_print(const float &load_length = 0, const float &initial_extrude_length = 0, int8_t max_beep_count = 0) { static void resume_print(const float &load_length = 0, const float &initial_extrude_length = 0, const int8_t max_beep_count = 0) {
bool nozzle_timed_out = false; bool nozzle_timed_out = false;
if (!move_away_flag) return; if (!move_away_flag) return;
@ -6974,39 +6974,57 @@ inline void gcode_M104() {
#if HAS_TEMP_HOTEND || HAS_TEMP_BED #if HAS_TEMP_HOTEND || HAS_TEMP_BED
void print_heaterstates() { void print_heater_state(const float &c, const float &t,
#if HAS_TEMP_HOTEND
SERIAL_PROTOCOLPGM(" T:");
SERIAL_PROTOCOL(thermalManager.degHotend(target_extruder));
SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL(thermalManager.degTargetHotend(target_extruder));
#if ENABLED(SHOW_TEMP_ADC_VALUES) #if ENABLED(SHOW_TEMP_ADC_VALUES)
SERIAL_PROTOCOLPAIR(" (", thermalManager.rawHotendTemp(target_extruder) / OVERSAMPLENR); const float r,
SERIAL_PROTOCOLCHAR(')');
#endif
#endif
#if HAS_TEMP_BED
SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL(thermalManager.degBed());
SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL(thermalManager.degTargetBed());
#if ENABLED(SHOW_TEMP_ADC_VALUES)
SERIAL_PROTOCOLPAIR(" (", thermalManager.rawBedTemp() / OVERSAMPLENR);
SERIAL_PROTOCOLCHAR(')');
#endif #endif
const int8_t e=-2
) {
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOLCHAR(
#if HAS_TEMP_BED && HAS_TEMP_HOTEND
e == -1 ? 'B' : 'T'
#elif HAS_TEMP_HOTEND
'T'
#else
'B'
#endif #endif
);
#if HOTENDS > 1 #if HOTENDS > 1
HOTEND_LOOP() { if (e >= 0) SERIAL_PROTOCOLCHAR('0' + e);
SERIAL_PROTOCOLPAIR(" T", e); #endif
SERIAL_PROTOCOLCHAR(':'); SERIAL_PROTOCOLCHAR(':');
SERIAL_PROTOCOL(thermalManager.degHotend(e)); SERIAL_PROTOCOL(c);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPAIR(" /" , t);
SERIAL_PROTOCOL(thermalManager.degTargetHotend(e));
#if ENABLED(SHOW_TEMP_ADC_VALUES) #if ENABLED(SHOW_TEMP_ADC_VALUES)
SERIAL_PROTOCOLPAIR(" (", thermalManager.rawHotendTemp(e) / OVERSAMPLENR); SERIAL_PROTOCOLPAIR(" (", r / OVERSAMPLENR);
SERIAL_PROTOCOLCHAR(')'); SERIAL_PROTOCOLCHAR(')');
#endif #endif
} }
void print_heaterstates() {
#if HAS_TEMP_HOTEND
print_heater_state(thermalManager.degHotend(target_extruder), thermalManager.degTargetHotend(target_extruder)
#if ENABLED(SHOW_TEMP_ADC_VALUES)
, thermalManager.rawHotendTemp(target_extruder)
#endif
);
#endif
#if HAS_TEMP_BED
print_heater_state(thermalManager.degBed(), thermalManager.degTargetBed(),
#if ENABLED(SHOW_TEMP_ADC_VALUES)
thermalManager.rawBedTemp(),
#endif
-1 // BED
);
#endif
#if HOTENDS > 1
HOTEND_LOOP() print_heater_state(thermalManager.degHotend(e), thermalManager.degTargetHotend(e),
#if ENABLED(SHOW_TEMP_ADC_VALUES)
thermalManager.rawHotendTemp(e),
#endif
e
);
#endif #endif
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder));
@ -7206,16 +7224,12 @@ inline void gcode_M109() {
print_heaterstates(); print_heaterstates();
#if TEMP_RESIDENCY_TIME > 0 #if TEMP_RESIDENCY_TIME > 0
SERIAL_PROTOCOLPGM(" W:"); SERIAL_PROTOCOLPGM(" W:");
if (residency_start_ms) { if (residency_start_ms)
long rem = (((TEMP_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL; SERIAL_PROTOCOL(long((((TEMP_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL));
SERIAL_PROTOCOLLN(rem); else
} SERIAL_PROTOCOLCHAR('?');
else {
SERIAL_PROTOCOLLNPGM("?");
}
#else
SERIAL_EOL();
#endif #endif
SERIAL_EOL();
} }
idle(); idle();
@ -7339,16 +7353,12 @@ inline void gcode_M109() {
print_heaterstates(); print_heaterstates();
#if TEMP_BED_RESIDENCY_TIME > 0 #if TEMP_BED_RESIDENCY_TIME > 0
SERIAL_PROTOCOLPGM(" W:"); SERIAL_PROTOCOLPGM(" W:");
if (residency_start_ms) { if (residency_start_ms)
long rem = (((TEMP_BED_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL; SERIAL_PROTOCOL(long((((TEMP_BED_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL));
SERIAL_PROTOCOLLN(rem); else
} SERIAL_PROTOCOLCHAR('?');
else {
SERIAL_PROTOCOLLNPGM("?");
}
#else
SERIAL_EOL();
#endif #endif
SERIAL_EOL();
} }
idle(); idle();