Fix SPI comments, clean up U20 pins (#14700)
This commit is contained in:
Tanguy Pruvot
Scott Lahteine
parent
7501e40e0b
commit
dca0c3d02a
@ -80,8 +80,8 @@ void spiBegin() {
|
||||
*/
|
||||
void spiInit(uint8_t spiRate) {
|
||||
/**
|
||||
* STM32F1 APB1 = 36MHz, APB2 = 72MHz, max SPI speed of this MCU if 18Mhz
|
||||
* STM32F1 has 3 SPI ports, SPI1 in APB1, SPI2/SPI3 in APB2
|
||||
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
|
||||
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
|
||||
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
|
||||
*/
|
||||
#if SPI_DEVICE == 1
|
||||
|
||||
@ -16,34 +16,42 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* ALFAWISE U30 (STM32F103VET6) board pin assignments
|
||||
* Longer3D LK1/LK2 & Alfawise U20/U30 (STM32F103VET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if !defined(__STM32F1__) && !defined(STM32F1xx)
|
||||
#error "Oops! Select a STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "LONGER3D only supports 1 hotend / E-stepper. Comment out this line to continue."
|
||||
#error "Longer3D board only supports 1 hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Longer3D"
|
||||
#define ALFAWISE_UX0 // Common to all Alfawise STM32F1 boards
|
||||
#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)
|
||||
|
||||
//#define DISABLE_DEBUG // We still want to debug with STLINK...
|
||||
#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK
|
||||
// Release PB4 (STEP_X_PIN) from JTAG NRST role.
|
||||
//#define DISABLE_DEBUG // > Hobi : We still want to debug with STLINK...
|
||||
#define DISABLE_JTAG // we free the jtag pins (PA15) but keep STLINK
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC1 // pin 16
|
||||
//#define X_MAX_PIN PC0 // pin 15 Used as filament sensor on Alfawise setup
|
||||
#define X_MIN_PIN PC1 // pin 16
|
||||
#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup)
|
||||
#define Y_MIN_PIN PC15 // pin 9
|
||||
//#define Y_MAX_PIN PC14 // pin 8 Unused in stock Alfawise setup
|
||||
#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup)
|
||||
#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function
|
||||
//#define Z_MAX_PIN PE5 // pin 4 Unused in stock Alfawise setup
|
||||
#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup)
|
||||
// May be used for BLTouch Servo function on older variants (<= V08)
|
||||
|
||||
//
|
||||
// Filament Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
@ -78,12 +86,7 @@
|
||||
#define FAN_PIN PA15 // pin 77 (4cm Fan)
|
||||
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
|
||||
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
|
||||
#define FAN_MAX_PWM 255
|
||||
|
||||
// Filament Sensor
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
|
||||
#endif
|
||||
#define FAN_MAX_PWM 255
|
||||
|
||||
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
|
||||
// Can drive a PC Buzzer, if connected between PWM and 5V pins
|
||||
@ -93,17 +96,14 @@
|
||||
//
|
||||
// PWM
|
||||
//
|
||||
//#define NUM_SERVOS 1
|
||||
//#define SERVO0_TIMER_NUM 1 // General or Adv. timer to use for the servo PWM (2 & 5 are reserved)
|
||||
|
||||
#define SERVO0_PWM_OD
|
||||
#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V)
|
||||
#define SERVO0_PWM_OD // Comment this if using PE5
|
||||
|
||||
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
|
||||
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
|
||||
|
||||
/**
|
||||
* Note: Alfawise screens use various TFT controllers. Supported screens
|
||||
* are based on the ILI9342, ILI9328 and ST7798V. Define init sequences for
|
||||
* are based on the ILI9341, ILI9328 and ST7798V. Define init sequences for
|
||||
* other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
||||
*
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader
|
||||
@ -112,7 +112,6 @@
|
||||
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
|
||||
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define LCD_RESET_PIN PC4 // pin 33
|
||||
#define LCD_BACKLIGHT_PIN PD12 // pin 59
|
||||
@ -123,8 +122,8 @@
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
|
||||
#define DOGLCD_SCK -1
|
||||
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
|
||||
#define DOGLCD_SCK -1
|
||||
|
||||
/**
|
||||
* Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
|
||||
@ -146,13 +145,12 @@
|
||||
//
|
||||
// SPI1 (EEPROM W25Q64 + DAC OUT)
|
||||
//
|
||||
|
||||
#undef E2END
|
||||
#define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits)
|
||||
#define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits)
|
||||
/*
|
||||
#define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement
|
||||
#define SPI_CHAN_EEPROM1 1
|
||||
#define SPI_EEPROM1_CS PC5 // pin 34
|
||||
#define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement
|
||||
#define SPI_CHAN_EEPROM1 1
|
||||
#define SPI_EEPROM1_CS PC5 // pin 34
|
||||
|
||||
//#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
|
||||
//#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
|
||||
|
||||
@ -1335,7 +1335,7 @@
|
||||
// The number of linear motions that can be in the plan at any give time.
|
||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||
#endif
|
||||
@ -1344,7 +1344,7 @@
|
||||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 8
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user