Add Funmat HT V4.0 board support (#17305)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
InsanityAutomation 2020-03-27 22:08:47 -04:00 committed by GitHub
parent e71b25a555
commit de648bfdc1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 163 additions and 8 deletions

View File

@ -144,6 +144,7 @@
#define BOARD_LEAPFROG_XEED2015 1321 // Leapfrog Xeed 2015
#define BOARD_PICA_REVB 1322 // PICA Shield (original version)
#define BOARD_PICA 1323 // PICA Shield (rev C or later)
#define BOARD_INTAMSYS40 1324 // Intamsys 4.0 (Funmat HT)
//
// ATmega1281, ATmega2561

View File

@ -0,0 +1,152 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Intamsys Funmat HT V4.0 Mainboard
* 4988 Drivers Tested
* 2208 version exists and may or may not work
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "Intamsys 4.0"
//
// Servos
//
#define SERVO0_PIN 12 // Uses High Temp Present Jumper Pin
//
// Limit Switches
//
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_MIN_PIN 29
#define Z_MAX_PIN 69
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 69
#endif
#define FIL_RUNOUT_PIN 10
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27 // 44
#define Y_STEP_PIN 32 // 33
#define Y_DIR_PIN 33 // 31, 32
#define Y_ENABLE_PIN 31 // 32
#define Z_STEP_PIN 35 // 35
#define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34 // 34
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define MOTOR_CURRENT_PWM_X_PIN 11
#define MOTOR_CURRENT_PWM_Y_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
//
// Temperature Sensors
//
#define TEMP_0_PIN 8 // Analog Input D62
#define TEMP_BED_PIN 10 // Analog Input D64
#define TEMP_CHAMBER_PIN 9 // Analog Input D63
//
// Heaters / Fans
//
#define HEATER_0_PIN 2 // PWM
#define HEATER_BED_PIN 4 // PWM
#define HEATER_CHAMBER_PIN 3 // PWM
#define FAN_PIN 7 // PWM
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 39
#if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 8
#endif
#if ENABLED(PSU_CONTROL)
#define PS_ON_PIN 38 // UPS Module
#endif
//
// LCD Controller
//
#define BEEPER_PIN 18
#if HAS_SPI_LCD
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 30
#define LCD_PINS_D4 14
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define BTN_EN1 40
#define BTN_EN2 41
#define BTN_ENC 19
#endif
///////////////////// SPARE HEADERS //////////////
/**
*
* J25
* 1 D54
* 2 D55
* 3 D56
* 4 D57
* 5 D58
* 6 D59
* 7 D60
* 8 D61
Hotend High Temp Connected : D12
*/

View File

@ -258,6 +258,8 @@
#include "mega/pins_PICA.h" // ATmega2560 env:mega2560
#elif MB(PICA_REVB)
#include "mega/pins_PICAOLD.h" // ATmega2560 env:mega2560
#elif MB(INTAMSYS40)
#include "mega/pins_INTAMSYS40.h" // ATmega2560 env:mega2560
//
// ATmega1281, ATmega2561

View File

@ -178,14 +178,14 @@
//#define E4_HARDWARE_SERIAL Serial1
// Unused servo pins may be repurposed with SoftwareSerialM
//#define X_SERIAL_TX_PIN PF8 // SERVO3_PIN
//#define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN
//#define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN
//#define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN
//#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
//#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
//#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
//#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
//#define X_SERIAL_TX_PIN PF8 // SERVO3_PIN
//#define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN
//#define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN
//#define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN
//#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
//#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
//#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
//#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
// Reduce baud rate for software serial reliability
#if HAS_TMC_SW_SERIAL