From e017228569511382298c2ff9a347a78542351cd6 Mon Sep 17 00:00:00 2001 From: Erik van der Zalm Date: Mon, 12 Dec 2011 19:34:37 +0100 Subject: [PATCH] Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF --- Marlin/Configuration.h | 95 +- Marlin/Marlin.h | 2 - Marlin/Marlin.pde | 46 +- Marlin/fastio.h | 5153 ++++++++++++++++++++-------------------- Marlin/pins.h | 1473 ++++++------ Marlin/planner.cpp | 4 +- Marlin/stepper.cpp | 80 +- Marlin/stepper.h | 15 + Marlin/temperature.cpp | 105 +- Marlin/temperature.h | 285 +-- Marlin/ultralcd.pde | 3680 ++++++++++++++-------------- 11 files changed, 5525 insertions(+), 5413 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 346db503f..d4e23bd16 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -4,11 +4,11 @@ // This determines the communication speed of the printer -//#define BAUDRATE 250000 -#define BAUDRATE 115200 +#define BAUDRATE 250000 +//#define BAUDRATE 115200 //#define BAUDRATE 230400 -#define EXTRUDERS 2 +#define EXTRUDERS 1 // Frequency limit // See nophead's blog for more info @@ -32,7 +32,7 @@ // Sanguinololu 1.2 and above = 62 // Ultimaker = 7, // Teensylu = 8 -#define MOTHERBOARD 33 +#define MOTHERBOARD 7 //=========================================================================== //=============================Thermal Settings ============================ @@ -46,16 +46,21 @@ // 5 is ParCan supplied 104GT-2 100K // 6 is EPCOS 100k // 7 is 100k Honeywell thermistor 135-104LAG-J01 -#define THERMISTORHEATER_0 1 -#define THERMISTORHEATER_1 1 -#define HEATER_0_USES_THERMISTOR -#define HEATER_1_USES_THERMISTOR -//#define HEATER_0_USES_AD595 + +//#define THERMISTORHEATER_0 3 +//#define THERMISTORHEATER_1 1 +//#define THERMISTORHEATER_2 1 + +//#define HEATER_0_USES_THERMISTOR +//#define HEATER_1_USES_THERMISTOR +//#define HEATER_2_USES_THERMISTOR +#define HEATER_0_USES_AD595 //#define HEATER_1_USES_AD595 +//#define HEATER_2_USES_AD595 // Select one of these only to define how the bed temp is read. -#define THERMISTORBED 1 -#define BED_USES_THERMISTOR +//#define THERMISTORBED 1 +//#define BED_USES_THERMISTOR //#define BED_USES_AD595 #define BED_CHECK_INTERVAL 5000 //ms @@ -73,7 +78,8 @@ //// The minimal temperature defines the temperature below which the heater will not be enabled #define HEATER_0_MINTEMP 5 //#define HEATER_1_MINTEMP 5 -#define BED_MINTEMP 5 +//#define HEATER_2_MINTEMP 5 +//#define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -81,7 +87,8 @@ // You should use MINTEMP for thermistor short/failure protection. #define HEATER_0_MAXTEMP 275 //#define HEATER_1_MAXTEMP 275 -#define BED_MAXTEMP 150 +//#define HEATER_2_MAXTEMP 275 +//#define BED_MAXTEMP 150 // Wait for Cooldown @@ -92,21 +99,17 @@ // Heating is finished if a temperature close to this degree shift is reached #define HEATING_EARLY_FINISH_DEG_OFFSET 1 //Degree + // PID settings: // Uncomment the following line to enable PID support. - #define PIDTEMP +#define PID_MAX 255 // limits current to nozzle; 255=full current #ifdef PIDTEMP - #if MOTHERBOARD == 62 - #error Sanguinololu does not support PID, sorry. Please disable it. - #endif //#define PID_DEBUG // Sends debug data to the serial port. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104 sets the output power in % - - #define PID_MAX 255 // limits current to nozzle; 255=full current #define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term #define K1 0.95 //smoothing factor withing the PID - #define PID_dT 0.1 //sampling period of the PID + #define PID_dT 0.128 //sampling period of the PID //To develop some PID settings for your machine, you can initiall follow // the Ziegler-Nichols method. @@ -130,14 +133,14 @@ // #define DEFAULT_Kd (PID_SWING_AT_CRITIAL/8./PID_dT) // Ultitmaker -// #define DEFAULT_Kp 22.2 -// #define DEFAULT_Ki (1.25*PID_dT) -// #define DEFAULT_Kd (99/PID_dT) + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki (1.25*PID_dT) + #define DEFAULT_Kd (99/PID_dT) // Makergear - #define DEFAULT_Kp 7.0 - #define DEFAULT_Ki 0.1 - #define DEFAULT_Kd 12 +// #define DEFAULT_Kp 7.0 +// #define DEFAULT_Ki 0.1 +// #define DEFAULT_Kd 12 // Mendel Parts V9 on 12V // #define DEFAULT_Kp 63.0 @@ -170,12 +173,12 @@ #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. -const bool X_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. -const bool Y_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. -const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops. +const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. // For optos H21LOB set to true, for Mendel-Parts newer optos TCST2103 set to false -//#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing +#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 #define X_ENABLE_ON 0 @@ -186,7 +189,7 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t // Disables axis when it's not being used. #define DISABLE_X false #define DISABLE_Y false -#define DISABLE_Z true +#define DISABLE_Z false #define DISABLE_E false // For all extruders // Inverting axis direction @@ -195,11 +198,11 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t //#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true //#define INVERT_E*_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false, used for all extruders -#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false //// ENDSTOP SETTINGS: @@ -208,15 +211,15 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 -#define min_software_endstops false //If true, axis won't move to coordinates less than zero. -#define max_software_endstops false //If true, axis won't move to coordinates greater than the defined lengths below. -#define X_MAX_LENGTH 210 -#define Y_MAX_LENGTH 210 -#define Z_MAX_LENGTH 210 +#define min_software_endstops true //If true, axis won't move to coordinates less than zero. +#define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below. +#define X_MAX_LENGTH 205 +#define Y_MAX_LENGTH 205 +#define Z_MAX_LENGTH 200 //// MOVEMENT SETTINGS #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E -#define HOMING_FEEDRATE {30*60, 30*60, 2*60, 0} // set the homing speeds (mm/min) +#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: #define X_HOME_RETRACT_MM 5 @@ -230,9 +233,9 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t // default settings -//#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker -//#define DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 3333.92, 67} //sells mendel with v9 extruder -#define DEFAULT_AXIS_STEPS_PER_UNIT {80.3232, 80.8900, 2284.7651, 757.2218} // SAE Prusa w/ Wade extruder +#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker +//#define DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 3333.92, 360} //sells mendel with v9 extruder +//#define DEFAULT_AXIS_STEPS_PER_UNIT {80.3232, 80.8900, 2284.7651, 757.2218} // SAE Prusa w/ Wade extruder #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. @@ -283,10 +286,10 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t // hooke's law says: force = k * distance // bernoulli's priniciple says: v ^ 2 / 2 + g . h + pressure / density = constant // so: v ^ 2 is proportional to number of steps we advance the extruder -//#define ADVANCE +#define ADVANCE #ifdef ADVANCE - #define EXTRUDER_ADVANCE_K .3 + #define EXTRUDER_ADVANCE_K .0 #define D_FILAMENT 2.85 #define STEPS_MM_E 836 @@ -298,10 +301,10 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t //LCD and SD support //#define ULTRA_LCD //general lcd support, also 16x2 -#define SDSUPPORT // Enable SD Card Support in Hardware Console +//#define SDSUPPORT // Enable SD Card Support in Hardware Console #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? -//#define ULTIPANEL +#define ULTIPANEL #ifdef ULTIPANEL //#define NEWPANEL //enable this if you have a click-encoder panel #define SDSUPPORT diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 626f61b6c..d4654a386 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -57,8 +57,6 @@ const prog_char echomagic[] PROGMEM ="echo:"; #define SERIAL_ECHOPAIR(name,value) {SERIAL_ECHOPGM(name);SERIAL_ECHO(value);} -// Macro for getting current active extruder -#define ACTIVE_EXTRUDER (active_extruder) //things to write to serial from Programmemory. saves 400 to 2k of RAM. #define SerialprintPGM(x) serialprintPGM(MYPGM(x)) diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde index 9b765ebd0..183002fe2 100644 --- a/Marlin/Marlin.pde +++ b/Marlin/Marlin.pde @@ -465,16 +465,16 @@ FORCE_INLINE bool code_seen(char code) plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); \ destination[LETTER##_AXIS] = 1.5 * LETTER##_MAX_LENGTH * LETTER##_HOME_DIR; \ feedrate = homing_feedrate[LETTER##_AXIS]; \ - prepare_move(); \ + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \ \ current_position[LETTER##_AXIS] = 0;\ plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);\ destination[LETTER##_AXIS] = -LETTER##_HOME_RETRACT_MM * LETTER##_HOME_DIR;\ - prepare_move(); \ + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \ \ destination[LETTER##_AXIS] = 2*LETTER##_HOME_RETRACT_MM * LETTER##_HOME_DIR;\ feedrate = homing_feedrate[LETTER##_AXIS]/2 ; \ - prepare_move(); \ + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \ \ current_position[LETTER##_AXIS] = (LETTER##_HOME_DIR == -1) ? 0 : LETTER##_MAX_LENGTH;\ plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);\ @@ -541,6 +541,7 @@ FORCE_INLINE void process_commands() if( code_seen(axis_codes[0]) && code_seen(axis_codes[1]) ) //first diagonal move { current_position[X_AXIS] = 0; current_position[Y_AXIS] = 0; + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR; destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; @@ -723,7 +724,7 @@ FORCE_INLINE void process_commands() if (code_seen('S')) setTargetBed(code_value()); break; case 105 : // M105 - tmp_extruder = ACTIVE_EXTRUDER; + tmp_extruder = active_extruder; if(code_seen('T')) { tmp_extruder = code_value(); if(tmp_extruder >= EXTRUDERS) { @@ -743,6 +744,10 @@ FORCE_INLINE void process_commands() #else SERIAL_ERROR_START; SERIAL_ERRORLNPGM("No thermistors - no temp"); + #endif + #ifdef PIDTEMP + SERIAL_PROTOCOLPGM(" @:"); + SERIAL_PROTOCOL(getHeaterPower(tmp_extruder)); #endif SERIAL_PROTOCOLLN(""); return; @@ -788,24 +793,26 @@ FORCE_INLINE void process_commands() while((residencyStart == -1) || (residencyStart > -1 && (millis() - residencyStart) < TEMP_RESIDENCY_TIME*1000) ) { #else - while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) { + while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) { #endif //TEMP_RESIDENCY_TIME if( (millis() - codenum) > 1000 ) { //Print Temp Reading and remaining time every 1 second while heating up/cooling down SERIAL_PROTOCOLPGM("T:"); - SERIAL_PROTOCOLLN( degHotend(tmp_extruder) ); + SERIAL_PROTOCOL( degHotend(tmp_extruder) ); SERIAL_PROTOCOLPGM(" E:"); SERIAL_PROTOCOLLN( (int)tmp_extruder ); - SERIAL_PROTOCOLPGM(" W:"); - if(residencyStart > -1) - { - codenum = TEMP_RESIDENCY_TIME - ((millis() - residencyStart) / 1000); - SERIAL_PROTOCOLLN( codenum ); - } - else - { - SERIAL_PROTOCOLLN( "?" ); - } + #ifdef TEMP_RESIDENCY_TIME + SERIAL_PROTOCOLPGM(" W:"); + if(residencyStart > -1) + { + codenum = TEMP_RESIDENCY_TIME - ((millis() - residencyStart) / 1000); + SERIAL_PROTOCOLLN( codenum ); + } + else + { + SERIAL_PROTOCOLLN( "?" ); + } + #endif codenum = millis(); } manage_heater(); @@ -834,11 +841,11 @@ FORCE_INLINE void process_commands() { if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. { - float tt=degHotend(ACTIVE_EXTRUDER); + float tt=degHotend(active_extruder); SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOL(tt); SERIAL_PROTOCOLPGM(" E:"); - SERIAL_PROTOCOLLN( (int)tmp_extruder ); + SERIAL_PROTOCOLLN( (int)active_extruder ); SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLLN(degBed()); codenum = millis(); @@ -1191,6 +1198,7 @@ void manage_inactivity(byte debug) void kill() { + cli(); // Stop interrupts disable_heater(); disable_x(); @@ -1207,4 +1215,4 @@ void kill() while(1); // Wait for reset } - + diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 634571e3a..5188a0681 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -1,2573 +1,2582 @@ -/* - This code contibuted by Triffid_Hunter and modified by Kliment - why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html -*/ - -#ifndef _ARDUINO_H -#define _ARDUINO_H - -#include - -/* - utility functions -*/ - -#ifndef MASK -/// MASKING- returns \f$2^PIN\f$ - #define MASK(PIN) (1 << PIN) -#endif - -/* - magic I/O routines - - now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0); -*/ - -/// Read a pin -#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN))) -/// write to a pin -#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0) -//#define _WRITE(IO, v) do { #if (DIO ## IO ## _WPORT >= 0x100) CRITICAL_SECTION_START; if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); };#if (DIO ## IO ## _WPORT >= 0x100) CRITICAL_SECTION_END; } while (0) -/// toggle a pin -#define _TOGGLE(IO) do {DIO ## IO ## _RPORT = MASK(DIO ## IO ## _PIN); } while (0) - -/// set pin as input -#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0) -/// set pin as output -#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0) - -/// check if pin is an input -#define _GET_INPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) == 0) -/// check if pin is an output -#define _GET_OUTPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) != 0) - -// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html - -/// Read a pin wrapper -#define READ(IO) _READ(IO) -/// Write to a pin wrapper -#define WRITE(IO, v) _WRITE(IO, v) -#if EXTRUDERS > 2 - #define WRITE_E_STEP(v) { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_STEP_PIN, v); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}} - #define NORM_E_DIR() { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}} - #define REV_E_DIR() { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}} -#elif EXTRUDERS > 1 - #define WRITE_E_STEP(v) { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }} - #define NORM_E_DIR() { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }} - #define REV_E_DIR() { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }} -#else - #define WRITE_E_STEP(v) WRITE(E0_STEP_PIN, v) - #define NORM_E_DIR() WRITE(E0_DIR_PIN, INVERT_E0_DIR) - #define REV_E_DIR() WRITE(E0_DIR_PIN, !INVERT_E0_DIR) -#endif - -/// toggle a pin wrapper -#define TOGGLE(IO) _TOGGLE(IO) - -/// set pin as input wrapper -#define SET_INPUT(IO) _SET_INPUT(IO) -/// set pin as output wrapper -#define SET_OUTPUT(IO) _SET_OUTPUT(IO) - -/// check if pin is an input wrapper -#define GET_INPUT(IO) _GET_INPUT(IO) -/// check if pin is an output wrapper -#define GET_OUTPUT(IO) _GET_OUTPUT(IO) - -/* - ports and functions - - added as necessary or if I feel like it- not a comprehensive list! -*/ - -#if defined (__AVR_ATmega168__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__) -// UART -#define RXD DIO0 -#define TXD DIO1 - -// SPI -#define SCK DIO13 -#define MISO DIO12 -#define MOSI DIO11 -#define SS DIO10 - -// TWI (I2C) -#define SCL AIO5 -#define SDA AIO4 - -// timers and PWM -#define OC0A DIO6 -#define OC0B DIO5 -#define OC1A DIO9 -#define OC1B DIO10 -#define OC2A DIO11 -#define OC2B DIO3 - -#define DEBUG_LED AIO5 - -/* -pins -*/ - -#define DIO0_PIN PIND0 -#define DIO0_RPORT PIND -#define DIO0_WPORT PORTD -#define DIO0_DDR DDRD -#define DIO0_PWM NULL - -#define DIO1_PIN PIND1 -#define DIO1_RPORT PIND -#define DIO1_WPORT PORTD -#define DIO1_DDR DDRD -#define DIO1_PWM NULL - -#define DIO2_PIN PIND2 -#define DIO2_RPORT PIND -#define DIO2_WPORT PORTD -#define DIO2_DDR DDRD -#define DIO2_PWM NULL - -#define DIO3_PIN PIND3 -#define DIO3_RPORT PIND -#define DIO3_WPORT PORTD -#define DIO3_DDR DDRD -#define DIO3_PWM &OCR2B - -#define DIO4_PIN PIND4 -#define DIO4_RPORT PIND -#define DIO4_WPORT PORTD -#define DIO4_DDR DDRD -#define DIO4_PWM NULL - -#define DIO5_PIN PIND5 -#define DIO5_RPORT PIND -#define DIO5_WPORT PORTD -#define DIO5_DDR DDRD -#define DIO5_PWM &OCR0B - -#define DIO6_PIN PIND6 -#define DIO6_RPORT PIND -#define DIO6_WPORT PORTD -#define DIO6_DDR DDRD -#define DIO6_PWM &OCR0A - -#define DIO7_PIN PIND7 -#define DIO7_RPORT PIND -#define DIO7_WPORT PORTD -#define DIO7_DDR DDRD -#define DIO7_PWM NULL - -#define DIO8_PIN PINB0 -#define DIO8_RPORT PINB -#define DIO8_WPORT PORTB -#define DIO8_DDR DDRB -#define DIO8_PWM NULL - -#define DIO9_PIN PINB1 -#define DIO9_RPORT PINB -#define DIO9_WPORT PORTB -#define DIO9_DDR DDRB -#define DIO9_PWM NULL - -#define DIO10_PIN PINB2 -#define DIO10_RPORT PINB -#define DIO10_WPORT PORTB -#define DIO10_DDR DDRB -#define DIO10_PWM NULL - -#define DIO11_PIN PINB3 -#define DIO11_RPORT PINB -#define DIO11_WPORT PORTB -#define DIO11_DDR DDRB -#define DIO11_PWM &OCR2A - -#define DIO12_PIN PINB4 -#define DIO12_RPORT PINB -#define DIO12_WPORT PORTB -#define DIO12_DDR DDRB -#define DIO12_PWM NULL - -#define DIO13_PIN PINB5 -#define DIO13_RPORT PINB -#define DIO13_WPORT PORTB -#define DIO13_DDR DDRB -#define DIO13_PWM NULL - - -#define DIO14_PIN PINC0 -#define DIO14_RPORT PINC -#define DIO14_WPORT PORTC -#define DIO14_DDR DDRC -#define DIO14_PWM NULL - -#define DIO15_PIN PINC1 -#define DIO15_RPORT PINC -#define DIO15_WPORT PORTC -#define DIO15_DDR DDRC -#define DIO15_PWM NULL - -#define DIO16_PIN PINC2 -#define DIO16_RPORT PINC -#define DIO16_WPORT PORTC -#define DIO16_DDR DDRC -#define DIO16_PWM NULL - -#define DIO17_PIN PINC3 -#define DIO17_RPORT PINC -#define DIO17_WPORT PORTC -#define DIO17_DDR DDRC -#define DIO17_PWM NULL - -#define DIO18_PIN PINC4 -#define DIO18_RPORT PINC -#define DIO18_WPORT PORTC -#define DIO18_DDR DDRC -#define DIO18_PWM NULL - -#define DIO19_PIN PINC5 -#define DIO19_RPORT PINC -#define DIO19_WPORT PORTC -#define DIO19_DDR DDRC -#define DIO19_PWM NULL - -#define DIO20_PIN PINC6 -#define DIO20_RPORT PINC -#define DIO20_WPORT PORTC -#define DIO20_DDR DDRC -#define DIO20_PWM NULL - -#define DIO21_PIN PINC7 -#define DIO21_RPORT PINC -#define DIO21_WPORT PORTC -#define DIO21_DDR DDRC -#define DIO21_PWM NULL - - - -#undef PB0 -#define PB0_PIN PINB0 -#define PB0_RPORT PINB -#define PB0_WPORT PORTB -#define PB0_DDR DDRB -#define PB0_PWM NULL - -#undef PB1 -#define PB1_PIN PINB1 -#define PB1_RPORT PINB -#define PB1_WPORT PORTB -#define PB1_DDR DDRB -#define PB1_PWM NULL - -#undef PB2 -#define PB2_PIN PINB2 -#define PB2_RPORT PINB -#define PB2_WPORT PORTB -#define PB2_DDR DDRB -#define PB2_PWM NULL - -#undef PB3 -#define PB3_PIN PINB3 -#define PB3_RPORT PINB -#define PB3_WPORT PORTB -#define PB3_DDR DDRB -#define PB3_PWM &OCR2A - -#undef PB4 -#define PB4_PIN PINB4 -#define PB4_RPORT PINB -#define PB4_WPORT PORTB -#define PB4_DDR DDRB -#define PB4_PWM NULL - -#undef PB5 -#define PB5_PIN PINB5 -#define PB5_RPORT PINB -#define PB5_WPORT PORTB -#define PB5_DDR DDRB -#define PB5_PWM NULL - -#undef PB6 -#define PB6_PIN PINB6 -#define PB6_RPORT PINB -#define PB6_WPORT PORTB -#define PB6_DDR DDRB -#define PB6_PWM NULL - -#undef PB7 -#define PB7_PIN PINB7 -#define PB7_RPORT PINB -#define PB7_WPORT PORTB -#define PB7_DDR DDRB -#define PB7_PWM NULL - - -#undef PC0 -#define PC0_PIN PINC0 -#define PC0_RPORT PINC -#define PC0_WPORT PORTC -#define PC0_DDR DDRC -#define PC0_PWM NULL - -#undef PC1 -#define PC1_PIN PINC1 -#define PC1_RPORT PINC -#define PC1_WPORT PORTC -#define PC1_DDR DDRC -#define PC1_PWM NULL - -#undef PC2 -#define PC2_PIN PINC2 -#define PC2_RPORT PINC -#define PC2_WPORT PORTC -#define PC2_DDR DDRC -#define PC2_PWM NULL - -#undef PC3 -#define PC3_PIN PINC3 -#define PC3_RPORT PINC -#define PC3_WPORT PORTC -#define PC3_DDR DDRC -#define PC3_PWM NULL - -#undef PC4 -#define PC4_PIN PINC4 -#define PC4_RPORT PINC -#define PC4_WPORT PORTC -#define PC4_DDR DDRC -#define PC4_PWM NULL - -#undef PC5 -#define PC5_PIN PINC5 -#define PC5_RPORT PINC -#define PC5_WPORT PORTC -#define PC5_DDR DDRC -#define PC5_PWM NULL - -#undef PC6 -#define PC6_PIN PINC6 -#define PC6_RPORT PINC -#define PC6_WPORT PORTC -#define PC6_DDR DDRC -#define PC6_PWM NULL - -#undef PC7 -#define PC7_PIN PINC7 -#define PC7_RPORT PINC -#define PC7_WPORT PORTC -#define PC7_DDR DDRC -#define PC7_PWM NULL - - -#undef PD0 -#define PD0_PIN PIND0 -#define PD0_RPORT PIND -#define PD0_WPORT PORTD -#define PD0_DDR DDRD -#define PD0_PWM NULL - -#undef PD1 -#define PD1_PIN PIND1 -#define PD1_RPORT PIND -#define PD1_WPORT PORTD -#define PD1_DDR DDRD -#define PD1_PWM NULL - -#undef PD2 -#define PD2_PIN PIND2 -#define PD2_RPORT PIND -#define PD2_WPORT PORTD -#define PD2_DDR DDRD -#define PD2_PWM NULL - -#undef PD3 -#define PD3_PIN PIND3 -#define PD3_RPORT PIND -#define PD3_WPORT PORTD -#define PD3_DDR DDRD -#define PD3_PWM &OCR2B - -#undef PD4 -#define PD4_PIN PIND4 -#define PD4_RPORT PIND -#define PD4_WPORT PORTD -#define PD4_DDR DDRD -#define PD4_PWM NULL - -#undef PD5 -#define PD5_PIN PIND5 -#define PD5_RPORT PIND -#define PD5_WPORT PORTD -#define PD5_DDR DDRD -#define PD5_PWM &OCR0B - -#undef PD6 -#define PD6_PIN PIND6 -#define PD6_RPORT PIND -#define PD6_WPORT PORTD -#define PD6_DDR DDRD -#define PD6_PWM &OCR0A - -#undef PD7 -#define PD7_PIN PIND7 -#define PD7_RPORT PIND -#define PD7_WPORT PORTD -#define PD7_DDR DDRD -#define PD7_PWM NULL -#endif /* _AVR_ATmega{168,328,328P}__ */ - -#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) -// UART -#define RXD DIO8 -#define TXD DIO9 -#define RXD0 DIO8 -#define TXD0 DIO9 - -#define RXD1 DIO10 -#define TXD1 DIO11 - -// SPI -#define SCK DIO7 -#define MISO DIO6 -#define MOSI DIO5 -#define SS DIO4 - -// TWI (I2C) -#define SCL DIO16 -#define SDA DIO17 - -// timers and PWM -#define OC0A DIO3 -#define OC0B DIO4 -#define OC1A DIO13 -#define OC1B DIO12 -#define OC2A DIO15 -#define OC2B DIO14 - -#define DEBUG_LED DIO0 -/* -pins -*/ - -#define DIO0_PIN PINB0 -#define DIO0_RPORT PINB -#define DIO0_WPORT PORTB -#define DIO0_DDR DDRB -#define DIO0_PWM NULL - -#define DIO1_PIN PINB1 -#define DIO1_RPORT PINB -#define DIO1_WPORT PORTB -#define DIO1_DDR DDRB -#define DIO1_PWM NULL - -#define DIO2_PIN PINB2 -#define DIO2_RPORT PINB -#define DIO2_WPORT PORTB -#define DIO2_DDR DDRB -#define DIO2_PWM NULL - -#define DIO3_PIN PINB3 -#define DIO3_RPORT PINB -#define DIO3_WPORT PORTB -#define DIO3_DDR DDRB -#define DIO3_PWM &OCR0A - -#define DIO4_PIN PINB4 -#define DIO4_RPORT PINB -#define DIO4_WPORT PORTB -#define DIO4_DDR DDRB -#define DIO4_PWM &OCR0B - -#define DIO5_PIN PINB5 -#define DIO5_RPORT PINB -#define DIO5_WPORT PORTB -#define DIO5_DDR DDRB -#define DIO5_PWM NULL - -#define DIO6_PIN PINB6 -#define DIO6_RPORT PINB -#define DIO6_WPORT PORTB -#define DIO6_DDR DDRB -#define DIO6_PWM NULL - -#define DIO7_PIN PINB7 -#define DIO7_RPORT PINB -#define DIO7_WPORT PORTB -#define DIO7_DDR DDRB -#define DIO7_PWM NULL - -#define DIO8_PIN PIND0 -#define DIO8_RPORT PIND -#define DIO8_WPORT PORTD -#define DIO8_DDR DDRD -#define DIO8_PWM NULL - -#define DIO9_PIN PIND1 -#define DIO9_RPORT PIND -#define DIO9_WPORT PORTD -#define DIO9_DDR DDRD -#define DIO9_PWM NULL - -#define DIO10_PIN PIND2 -#define DIO10_RPORT PIND -#define DIO10_WPORT PORTD -#define DIO10_DDR DDRD -#define DIO10_PWM NULL - -#define DIO11_PIN PIND3 -#define DIO11_RPORT PIND -#define DIO11_WPORT PORTD -#define DIO11_DDR DDRD -#define DIO11_PWM NULL - -#define DIO12_PIN PIND4 -#define DIO12_RPORT PIND -#define DIO12_WPORT PORTD -#define DIO12_DDR DDRD -#define DIO12_PWM NULL - -#define DIO13_PIN PIND5 -#define DIO13_RPORT PIND -#define DIO13_WPORT PORTD -#define DIO13_DDR DDRD -#define DIO13_PWM NULL - -#define DIO14_PIN PIND6 -#define DIO14_RPORT PIND -#define DIO14_WPORT PORTD -#define DIO14_DDR DDRD -#define DIO14_PWM &OCR2B - -#define DIO15_PIN PIND7 -#define DIO15_RPORT PIND -#define DIO15_WPORT PORTD -#define DIO15_DDR DDRD -#define DIO15_PWM &OCR2A - -#define DIO16_PIN PINC0 -#define DIO16_RPORT PINC -#define DIO16_WPORT PORTC -#define DIO16_DDR DDRC -#define DIO16_PWM NULL - -#define DIO17_PIN PINC1 -#define DIO17_RPORT PINC -#define DIO17_WPORT PORTC -#define DIO17_DDR DDRC -#define DIO17_PWM NULL - -#define DIO18_PIN PINC2 -#define DIO18_RPORT PINC -#define DIO18_WPORT PORTC -#define DIO18_DDR DDRC -#define DIO18_PWM NULL - -#define DIO19_PIN PINC3 -#define DIO19_RPORT PINC -#define DIO19_WPORT PORTC -#define DIO19_DDR DDRC -#define DIO19_PWM NULL - -#define DIO20_PIN PINC4 -#define DIO20_RPORT PINC -#define DIO20_WPORT PORTC -#define DIO20_DDR DDRC -#define DIO20_PWM NULL - -#define DIO21_PIN PINC5 -#define DIO21_RPORT PINC -#define DIO21_WPORT PORTC -#define DIO21_DDR DDRC -#define DIO21_PWM NULL - -#define DIO22_PIN PINC6 -#define DIO22_RPORT PINC -#define DIO22_WPORT PORTC -#define DIO22_DDR DDRC -#define DIO22_PWM NULL - -#define DIO23_PIN PINC7 -#define DIO23_RPORT PINC -#define DIO23_WPORT PORTC -#define DIO23_DDR DDRC -#define DIO23_PWM NULL - -#define DIO24_PIN PINA7 -#define DIO24_RPORT PINA -#define DIO24_WPORT PORTA -#define DIO24_DDR DDRA -#define DIO24_PWM NULL - -#define DIO25_PIN PINA6 -#define DIO25_RPORT PINA -#define DIO25_WPORT PORTA -#define DIO25_DDR DDRA -#define DIO25_PWM NULL - -#define DIO26_PIN PINA5 -#define DIO26_RPORT PINA -#define DIO26_WPORT PORTA -#define DIO26_DDR DDRA -#define DIO26_PWM NULL - -#define DIO27_PIN PINA4 -#define DIO27_RPORT PINA -#define DIO27_WPORT PORTA -#define DIO27_DDR DDRA -#define DIO27_PWM NULL - -#define DIO28_PIN PINA3 -#define DIO28_RPORT PINA -#define DIO28_WPORT PORTA -#define DIO28_DDR DDRA -#define DIO28_PWM NULL - -#define DIO29_PIN PINA2 -#define DIO29_RPORT PINA -#define DIO29_WPORT PORTA -#define DIO29_DDR DDRA -#define DIO29_PWM NULL - -#define DIO30_PIN PINA1 -#define DIO30_RPORT PINA -#define DIO30_WPORT PORTA -#define DIO30_DDR DDRA -#define DIO30_PWM NULL - -#define DIO31_PIN PINA0 -#define DIO31_RPORT PINA -#define DIO31_WPORT PORTA -#define DIO31_DDR DDRA -#define DIO31_PWM NULL - -#define AIO0_PIN PINA0 -#define AIO0_RPORT PINA -#define AIO0_WPORT PORTA -#define AIO0_DDR DDRA -#define AIO0_PWM NULL - -#define AIO1_PIN PINA1 -#define AIO1_RPORT PINA -#define AIO1_WPORT PORTA -#define AIO1_DDR DDRA -#define AIO1_PWM NULL - -#define AIO2_PIN PINA2 -#define AIO2_RPORT PINA -#define AIO2_WPORT PORTA -#define AIO2_DDR DDRA -#define AIO2_PWM NULL - -#define AIO3_PIN PINA3 -#define AIO3_RPORT PINA -#define AIO3_WPORT PORTA -#define AIO3_DDR DDRA -#define AIO3_PWM NULL - -#define AIO4_PIN PINA4 -#define AIO4_RPORT PINA -#define AIO4_WPORT PORTA -#define AIO4_DDR DDRA -#define AIO4_PWM NULL - -#define AIO5_PIN PINA5 -#define AIO5_RPORT PINA -#define AIO5_WPORT PORTA -#define AIO5_DDR DDRA -#define AIO5_PWM NULL - -#define AIO6_PIN PINA6 -#define AIO6_RPORT PINA -#define AIO6_WPORT PORTA -#define AIO6_DDR DDRA -#define AIO6_PWM NULL - -#define AIO7_PIN PINA7 -#define AIO7_RPORT PINA -#define AIO7_WPORT PORTA -#define AIO7_DDR DDRA -#define AIO7_PWM NULL - - - -#undef PA0 -#define PA0_PIN PINA0 -#define PA0_RPORT PINA -#define PA0_WPORT PORTA -#define PA0_DDR DDRA -#define PA0_PWM NULL - -#undef PA1 -#define PA1_PIN PINA1 -#define PA1_RPORT PINA -#define PA1_WPORT PORTA -#define PA1_DDR DDRA -#define PA1_PWM NULL - -#undef PA2 -#define PA2_PIN PINA2 -#define PA2_RPORT PINA -#define PA2_WPORT PORTA -#define PA2_DDR DDRA -#define PA2_PWM NULL - -#undef PA3 -#define PA3_PIN PINA3 -#define PA3_RPORT PINA -#define PA3_WPORT PORTA -#define PA3_DDR DDRA -#define PA3_PWM NULL - -#undef PA4 -#define PA4_PIN PINA4 -#define PA4_RPORT PINA -#define PA4_WPORT PORTA -#define PA4_DDR DDRA -#define PA4_PWM NULL - -#undef PA5 -#define PA5_PIN PINA5 -#define PA5_RPORT PINA -#define PA5_WPORT PORTA -#define PA5_DDR DDRA -#define PA5_PWM NULL - -#undef PA6 -#define PA6_PIN PINA6 -#define PA6_RPORT PINA -#define PA6_WPORT PORTA -#define PA6_DDR DDRA -#define PA6_PWM NULL - -#undef PA7 -#define PA7_PIN PINA7 -#define PA7_RPORT PINA -#define PA7_WPORT PORTA -#define PA7_DDR DDRA -#define PA7_PWM NULL - - -#undef PB0 -#define PB0_PIN PINB0 -#define PB0_RPORT PINB -#define PB0_WPORT PORTB -#define PB0_DDR DDRB -#define PB0_PWM NULL - -#undef PB1 -#define PB1_PIN PINB1 -#define PB1_RPORT PINB -#define PB1_WPORT PORTB -#define PB1_DDR DDRB -#define PB1_PWM NULL - -#undef PB2 -#define PB2_PIN PINB2 -#define PB2_RPORT PINB -#define PB2_WPORT PORTB -#define PB2_DDR DDRB -#define PB2_PWM NULL - -#undef PB3 -#define PB3_PIN PINB3 -#define PB3_RPORT PINB -#define PB3_WPORT PORTB -#define PB3_DDR DDRB -#define PB3_PWM &OCR0A - -#undef PB4 -#define PB4_PIN PINB4 -#define PB4_RPORT PINB -#define PB4_WPORT PORTB -#define PB4_DDR DDRB -#define PB4_PWM &OCR0B - -#undef PB5 -#define PB5_PIN PINB5 -#define PB5_RPORT PINB -#define PB5_WPORT PORTB -#define PB5_DDR DDRB -#define PB5_PWM NULL - -#undef PB6 -#define PB6_PIN PINB6 -#define PB6_RPORT PINB -#define PB6_WPORT PORTB -#define PB6_DDR DDRB -#define PB6_PWM NULL - -#undef PB7 -#define PB7_PIN PINB7 -#define PB7_RPORT PINB -#define PB7_WPORT PORTB -#define PB7_DDR DDRB -#define PB7_PWM NULL - - -#undef PC0 -#define PC0_PIN PINC0 -#define PC0_RPORT PINC -#define PC0_WPORT PORTC -#define PC0_DDR DDRC -#define PC0_PWM NULL - -#undef PC1 -#define PC1_PIN PINC1 -#define PC1_RPORT PINC -#define PC1_WPORT PORTC -#define PC1_DDR DDRC -#define PC1_PWM NULL - -#undef PC2 -#define PC2_PIN PINC2 -#define PC2_RPORT PINC -#define PC2_WPORT PORTC -#define PC2_DDR DDRC -#define PC2_PWM NULL - -#undef PC3 -#define PC3_PIN PINC3 -#define PC3_RPORT PINC -#define PC3_WPORT PORTC -#define PC3_DDR DDRC -#define PC3_PWM NULL - -#undef PC4 -#define PC4_PIN PINC4 -#define PC4_RPORT PINC -#define PC4_WPORT PORTC -#define PC4_DDR DDRC -#define PC4_PWM NULL - -#undef PC5 -#define PC5_PIN PINC5 -#define PC5_RPORT PINC -#define PC5_WPORT PORTC -#define PC5_DDR DDRC -#define PC5_PWM NULL - -#undef PC6 -#define PC6_PIN PINC6 -#define PC6_RPORT PINC -#define PC6_WPORT PORTC -#define PC6_DDR DDRC -#define PC6_PWM NULL - -#undef PC7 -#define PC7_PIN PINC7 -#define PC7_RPORT PINC -#define PC7_WPORT PORTC -#define PC7_DDR DDRC -#define PC7_PWM NULL - - -#undef PD0 -#define PD0_PIN PIND0 -#define PD0_RPORT PIND -#define PD0_WPORT PORTD -#define PD0_DDR DDRD -#define PD0_PWM NULL - -#undef PD1 -#define PD1_PIN PIND1 -#define PD1_RPORT PIND -#define PD1_WPORT PORTD -#define PD1_DDR DDRD -#define PD1_PWM NULL - -#undef PD2 -#define PD2_PIN PIND2 -#define PD2_RPORT PIND -#define PD2_WPORT PORTD -#define PD2_DDR DDRD -#define PD2_PWM NULL - -#undef PD3 -#define PD3_PIN PIND3 -#define PD3_RPORT PIND -#define PD3_WPORT PORTD -#define PD3_DDR DDRD -#define PD3_PWM NULL - -#undef PD4 -#define PD4_PIN PIND4 -#define PD4_RPORT PIND -#define PD4_WPORT PORTD -#define PD4_DDR DDRD -#define PD4_PWM NULL - -#undef PD5 -#define PD5_PIN PIND5 -#define PD5_RPORT PIND -#define PD5_WPORT PORTD -#define PD5_DDR DDRD -#define PD5_PWM NULL - -#undef PD6 -#define PD6_PIN PIND6 -#define PD6_RPORT PIND -#define PD6_WPORT PORTD -#define PD6_DDR DDRD -#define PD6_PWM &OCR2B - -#undef PD7 -#define PD7_PIN PIND7 -#define PD7_RPORT PIND -#define PD7_WPORT PORTD -#define PD7_DDR DDRD -#define PD7_PWM &OCR2A -#endif /* _AVR_ATmega{644,644P,644PA}__ */ - -#if defined (__AVR_ATmega1280__) || defined (__AVR_ATmega2560__) -// UART -#define RXD DIO0 -#define TXD DIO1 - -// SPI -#define SCK DIO52 -#define MISO DIO50 -#define MOSI DIO51 -#define SS DIO53 - -// TWI (I2C) -#define SCL DIO21 -#define SDA DIO20 - -// timers and PWM -#define OC0A DIO13 -#define OC0B DIO4 -#define OC1A DIO11 -#define OC1B DIO12 -#define OC2A DIO10 -#define OC2B DIO9 -#define OC3A DIO5 -#define OC3B DIO2 -#define OC3C DIO3 -#define OC4A DIO6 -#define OC4B DIO7 -#define OC4C DIO8 -#define OC5A DIO46 -#define OC5B DIO45 -#define OC5C DIO44 - -// change for your board -#define DEBUG_LED DIO21 - -/* -pins -*/ -#define DIO0_PIN PINE0 -#define DIO0_RPORT PINE -#define DIO0_WPORT PORTE -#define DIO0_DDR DDRE -#define DIO0_PWM NULL - -#define DIO1_PIN PINE1 -#define DIO1_RPORT PINE -#define DIO1_WPORT PORTE -#define DIO1_DDR DDRE -#define DIO1_PWM NULL - -#define DIO2_PIN PINE4 -#define DIO2_RPORT PINE -#define DIO2_WPORT PORTE -#define DIO2_DDR DDRE -#define DIO2_PWM &OCR3BL - -#define DIO3_PIN PINE5 -#define DIO3_RPORT PINE -#define DIO3_WPORT PORTE -#define DIO3_DDR DDRE -#define DIO3_PWM &OCR3CL - -#define DIO4_PIN PING5 -#define DIO4_RPORT PING -#define DIO4_WPORT PORTG -#define DIO4_DDR DDRG -#define DIO4_PWM &OCR0B - -#define DIO5_PIN PINE3 -#define DIO5_RPORT PINE -#define DIO5_WPORT PORTE -#define DIO5_DDR DDRE -#define DIO5_PWM &OCR3AL - -#define DIO6_PIN PINH3 -#define DIO6_RPORT PINH -#define DIO6_WPORT PORTH -#define DIO6_DDR DDRH -#define DIO6_PWM &OCR4AL - -#define DIO7_PIN PINH4 -#define DIO7_RPORT PINH -#define DIO7_WPORT PORTH -#define DIO7_DDR DDRH -#define DIO7_PWM &OCR4BL - -#define DIO8_PIN PINH5 -#define DIO8_RPORT PINH -#define DIO8_WPORT PORTH -#define DIO8_DDR DDRH -#define DIO8_PWM &OCR4CL - -#define DIO9_PIN PINH6 -#define DIO9_RPORT PINH -#define DIO9_WPORT PORTH -#define DIO9_DDR DDRH -#define DIO9_PWM &OCR2B - -#define DIO10_PIN PINB4 -#define DIO10_RPORT PINB -#define DIO10_WPORT PORTB -#define DIO10_DDR DDRB -#define DIO10_PWM &OCR2A - -#define DIO11_PIN PINB5 -#define DIO11_RPORT PINB -#define DIO11_WPORT PORTB -#define DIO11_DDR DDRB -#define DIO11_PWM NULL - -#define DIO12_PIN PINB6 -#define DIO12_RPORT PINB -#define DIO12_WPORT PORTB -#define DIO12_DDR DDRB -#define DIO12_PWM NULL - -#define DIO13_PIN PINB7 -#define DIO13_RPORT PINB -#define DIO13_WPORT PORTB -#define DIO13_DDR DDRB -#define DIO13_PWM &OCR0A - -#define DIO14_PIN PINJ1 -#define DIO14_RPORT PINJ -#define DIO14_WPORT PORTJ -#define DIO14_DDR DDRJ -#define DIO14_PWM NULL - -#define DIO15_PIN PINJ0 -#define DIO15_RPORT PINJ -#define DIO15_WPORT PORTJ -#define DIO15_DDR DDRJ -#define DIO15_PWM NULL - -#define DIO16_PIN PINH1 -#define DIO16_RPORT PINH -#define DIO16_WPORT PORTH -#define DIO16_DDR DDRH -#define DIO16_PWM NULL - -#define DIO17_PIN PINH0 -#define DIO17_RPORT PINH -#define DIO17_WPORT PORTH -#define DIO17_DDR DDRH -#define DIO17_PWM NULL - -#define DIO18_PIN PIND3 -#define DIO18_RPORT PIND -#define DIO18_WPORT PORTD -#define DIO18_DDR DDRD -#define DIO18_PWM NULL - -#define DIO19_PIN PIND2 -#define DIO19_RPORT PIND -#define DIO19_WPORT PORTD -#define DIO19_DDR DDRD -#define DIO19_PWM NULL - -#define DIO20_PIN PIND1 -#define DIO20_RPORT PIND -#define DIO20_WPORT PORTD -#define DIO20_DDR DDRD -#define DIO20_PWM NULL - -#define DIO21_PIN PIND0 -#define DIO21_RPORT PIND -#define DIO21_WPORT PORTD -#define DIO21_DDR DDRD -#define DIO21_PWM NULL - -#define DIO22_PIN PINA0 -#define DIO22_RPORT PINA -#define DIO22_WPORT PORTA -#define DIO22_DDR DDRA -#define DIO22_PWM NULL - -#define DIO23_PIN PINA1 -#define DIO23_RPORT PINA -#define DIO23_WPORT PORTA -#define DIO23_DDR DDRA -#define DIO23_PWM NULL - -#define DIO24_PIN PINA2 -#define DIO24_RPORT PINA -#define DIO24_WPORT PORTA -#define DIO24_DDR DDRA -#define DIO24_PWM NULL - -#define DIO25_PIN PINA3 -#define DIO25_RPORT PINA -#define DIO25_WPORT PORTA -#define DIO25_DDR DDRA -#define DIO25_PWM NULL - -#define DIO26_PIN PINA4 -#define DIO26_RPORT PINA -#define DIO26_WPORT PORTA -#define DIO26_DDR DDRA -#define DIO26_PWM NULL - -#define DIO27_PIN PINA5 -#define DIO27_RPORT PINA -#define DIO27_WPORT PORTA -#define DIO27_DDR DDRA -#define DIO27_PWM NULL - -#define DIO28_PIN PINA6 -#define DIO28_RPORT PINA -#define DIO28_WPORT PORTA -#define DIO28_DDR DDRA -#define DIO28_PWM NULL - -#define DIO29_PIN PINA7 -#define DIO29_RPORT PINA -#define DIO29_WPORT PORTA -#define DIO29_DDR DDRA -#define DIO29_PWM NULL - -#define DIO30_PIN PINC7 -#define DIO30_RPORT PINC -#define DIO30_WPORT PORTC -#define DIO30_DDR DDRC -#define DIO30_PWM NULL - -#define DIO31_PIN PINC6 -#define DIO31_RPORT PINC -#define DIO31_WPORT PORTC -#define DIO31_DDR DDRC -#define DIO31_PWM NULL - -#define DIO32_PIN PINC5 -#define DIO32_RPORT PINC -#define DIO32_WPORT PORTC -#define DIO32_DDR DDRC -#define DIO32_PWM NULL - -#define DIO33_PIN PINC4 -#define DIO33_RPORT PINC -#define DIO33_WPORT PORTC -#define DIO33_DDR DDRC -#define DIO33_PWM NULL - -#define DIO34_PIN PINC3 -#define DIO34_RPORT PINC -#define DIO34_WPORT PORTC -#define DIO34_DDR DDRC -#define DIO34_PWM NULL - -#define DIO35_PIN PINC2 -#define DIO35_RPORT PINC -#define DIO35_WPORT PORTC -#define DIO35_DDR DDRC -#define DIO35_PWM NULL - -#define DIO36_PIN PINC1 -#define DIO36_RPORT PINC -#define DIO36_WPORT PORTC -#define DIO36_DDR DDRC -#define DIO36_PWM NULL - -#define DIO37_PIN PINC0 -#define DIO37_RPORT PINC -#define DIO37_WPORT PORTC -#define DIO37_DDR DDRC -#define DIO37_PWM NULL - -#define DIO38_PIN PIND7 -#define DIO38_RPORT PIND -#define DIO38_WPORT PORTD -#define DIO38_DDR DDRD -#define DIO38_PWM NULL - -#define DIO39_PIN PING2 -#define DIO39_RPORT PING -#define DIO39_WPORT PORTG -#define DIO39_DDR DDRG -#define DIO39_PWM NULL - -#define DIO40_PIN PING1 -#define DIO40_RPORT PING -#define DIO40_WPORT PORTG -#define DIO40_DDR DDRG -#define DIO40_PWM NULL - -#define DIO41_PIN PING0 -#define DIO41_RPORT PING -#define DIO41_WPORT PORTG -#define DIO41_DDR DDRG -#define DIO41_PWM NULL - -#define DIO42_PIN PINL7 -#define DIO42_RPORT PINL -#define DIO42_WPORT PORTL -#define DIO42_DDR DDRL -#define DIO42_PWM NULL - -#define DIO43_PIN PINL6 -#define DIO43_RPORT PINL -#define DIO43_WPORT PORTL -#define DIO43_DDR DDRL -#define DIO43_PWM NULL - -#define DIO44_PIN PINL5 -#define DIO44_RPORT PINL -#define DIO44_WPORT PORTL -#define DIO44_DDR DDRL -#define DIO44_PWM &OCR5CL - -#define DIO45_PIN PINL4 -#define DIO45_RPORT PINL -#define DIO45_WPORT PORTL -#define DIO45_DDR DDRL -#define DIO45_PWM &OCR5BL - -#define DIO46_PIN PINL3 -#define DIO46_RPORT PINL -#define DIO46_WPORT PORTL -#define DIO46_DDR DDRL -#define DIO46_PWM &OCR5AL - -#define DIO47_PIN PINL2 -#define DIO47_RPORT PINL -#define DIO47_WPORT PORTL -#define DIO47_DDR DDRL -#define DIO47_PWM NULL - -#define DIO48_PIN PINL1 -#define DIO48_RPORT PINL -#define DIO48_WPORT PORTL -#define DIO48_DDR DDRL -#define DIO48_PWM NULL - -#define DIO49_PIN PINL0 -#define DIO49_RPORT PINL -#define DIO49_WPORT PORTL -#define DIO49_DDR DDRL -#define DIO49_PWM NULL - -#define DIO50_PIN PINB3 -#define DIO50_RPORT PINB -#define DIO50_WPORT PORTB -#define DIO50_DDR DDRB -#define DIO50_PWM NULL - -#define DIO51_PIN PINB2 -#define DIO51_RPORT PINB -#define DIO51_WPORT PORTB -#define DIO51_DDR DDRB -#define DIO51_PWM NULL - -#define DIO52_PIN PINB1 -#define DIO52_RPORT PINB -#define DIO52_WPORT PORTB -#define DIO52_DDR DDRB -#define DIO52_PWM NULL - -#define DIO53_PIN PINB0 -#define DIO53_RPORT PINB -#define DIO53_WPORT PORTB -#define DIO53_DDR DDRB -#define DIO53_PWM NULL - -#define DIO54_PIN PINF0 -#define DIO54_RPORT PINF -#define DIO54_WPORT PORTF -#define DIO54_DDR DDRF -#define DIO54_PWM NULL - -#define DIO55_PIN PINF1 -#define DIO55_RPORT PINF -#define DIO55_WPORT PORTF -#define DIO55_DDR DDRF -#define DIO55_PWM NULL - -#define DIO56_PIN PINF2 -#define DIO56_RPORT PINF -#define DIO56_WPORT PORTF -#define DIO56_DDR DDRF -#define DIO56_PWM NULL - -#define DIO57_PIN PINF3 -#define DIO57_RPORT PINF -#define DIO57_WPORT PORTF -#define DIO57_DDR DDRF -#define DIO57_PWM NULL - -#define DIO58_PIN PINF4 -#define DIO58_RPORT PINF -#define DIO58_WPORT PORTF -#define DIO58_DDR DDRF -#define DIO58_PWM NULL - -#define DIO59_PIN PINF5 -#define DIO59_RPORT PINF -#define DIO59_WPORT PORTF -#define DIO59_DDR DDRF -#define DIO59_PWM NULL - -#define DIO60_PIN PINF6 -#define DIO60_RPORT PINF -#define DIO60_WPORT PORTF -#define DIO60_DDR DDRF -#define DIO60_PWM NULL - -#define DIO61_PIN PINF7 -#define DIO61_RPORT PINF -#define DIO61_WPORT PORTF -#define DIO61_DDR DDRF -#define DIO61_PWM NULL - -#define DIO62_PIN PINK0 -#define DIO62_RPORT PINK -#define DIO62_WPORT PORTK -#define DIO62_DDR DDRK -#define DIO62_PWM NULL - -#define DIO63_PIN PINK1 -#define DIO63_RPORT PINK -#define DIO63_WPORT PORTK -#define DIO63_DDR DDRK -#define DIO63_PWM NULL - -#define DIO64_PIN PINK2 -#define DIO64_RPORT PINK -#define DIO64_WPORT PORTK -#define DIO64_DDR DDRK -#define DIO64_PWM NULL - -#define DIO65_PIN PINK3 -#define DIO65_RPORT PINK -#define DIO65_WPORT PORTK -#define DIO65_DDR DDRK -#define DIO65_PWM NULL - -#define DIO66_PIN PINK4 -#define DIO66_RPORT PINK -#define DIO66_WPORT PORTK -#define DIO66_DDR DDRK -#define DIO66_PWM NULL - -#define DIO67_PIN PINK5 -#define DIO67_RPORT PINK -#define DIO67_WPORT PORTK -#define DIO67_DDR DDRK -#define DIO67_PWM NULL - -#define DIO68_PIN PINK6 -#define DIO68_RPORT PINK -#define DIO68_WPORT PORTK -#define DIO68_DDR DDRK -#define DIO68_PWM NULL - -#define DIO69_PIN PINK7 -#define DIO69_RPORT PINK -#define DIO69_WPORT PORTK -#define DIO69_DDR DDRK -#define DIO69_PWM NULL - - - -#undef PA0 -#define PA0_PIN PINA0 -#define PA0_RPORT PINA -#define PA0_WPORT PORTA -#define PA0_DDR DDRA -#define PA0_PWM NULL -#undef PA1 -#define PA1_PIN PINA1 -#define PA1_RPORT PINA -#define PA1_WPORT PORTA -#define PA1_DDR DDRA -#define PA1_PWM NULL -#undef PA2 -#define PA2_PIN PINA2 -#define PA2_RPORT PINA -#define PA2_WPORT PORTA -#define PA2_DDR DDRA -#define PA2_PWM NULL -#undef PA3 -#define PA3_PIN PINA3 -#define PA3_RPORT PINA -#define PA3_WPORT PORTA -#define PA3_DDR DDRA -#define PA3_PWM NULL -#undef PA4 -#define PA4_PIN PINA4 -#define PA4_RPORT PINA -#define PA4_WPORT PORTA -#define PA4_DDR DDRA -#define PA4_PWM NULL -#undef PA5 -#define PA5_PIN PINA5 -#define PA5_RPORT PINA -#define PA5_WPORT PORTA -#define PA5_DDR DDRA -#define PA5_PWM NULL -#undef PA6 -#define PA6_PIN PINA6 -#define PA6_RPORT PINA -#define PA6_WPORT PORTA -#define PA6_DDR DDRA -#define PA6_PWM NULL -#undef PA7 -#define PA7_PIN PINA7 -#define PA7_RPORT PINA -#define PA7_WPORT PORTA -#define PA7_DDR DDRA -#define PA7_PWM NULL - -#undef PB0 -#define PB0_PIN PINB0 -#define PB0_RPORT PINB -#define PB0_WPORT PORTB -#define PB0_DDR DDRB -#define PB0_PWM NULL -#undef PB1 -#define PB1_PIN PINB1 -#define PB1_RPORT PINB -#define PB1_WPORT PORTB -#define PB1_DDR DDRB -#define PB1_PWM NULL -#undef PB2 -#define PB2_PIN PINB2 -#define PB2_RPORT PINB -#define PB2_WPORT PORTB -#define PB2_DDR DDRB -#define PB2_PWM NULL -#undef PB3 -#define PB3_PIN PINB3 -#define PB3_RPORT PINB -#define PB3_WPORT PORTB -#define PB3_DDR DDRB -#define PB3_PWM NULL -#undef PB4 -#define PB4_PIN PINB4 -#define PB4_RPORT PINB -#define PB4_WPORT PORTB -#define PB4_DDR DDRB -#define PB4_PWM &OCR2A -#undef PB5 -#define PB5_PIN PINB5 -#define PB5_RPORT PINB -#define PB5_WPORT PORTB -#define PB5_DDR DDRB -#define PB5_PWM NULL -#undef PB6 -#define PB6_PIN PINB6 -#define PB6_RPORT PINB -#define PB6_WPORT PORTB -#define PB6_DDR DDRB -#define PB6_PWM NULL -#undef PB7 -#define PB7_PIN PINB7 -#define PB7_RPORT PINB -#define PB7_WPORT PORTB -#define PB7_DDR DDRB -#define PB7_PWM &OCR0A - -#undef PC0 -#define PC0_PIN PINC0 -#define PC0_RPORT PINC -#define PC0_WPORT PORTC -#define PC0_DDR DDRC -#define PC0_PWM NULL -#undef PC1 -#define PC1_PIN PINC1 -#define PC1_RPORT PINC -#define PC1_WPORT PORTC -#define PC1_DDR DDRC -#define PC1_PWM NULL -#undef PC2 -#define PC2_PIN PINC2 -#define PC2_RPORT PINC -#define PC2_WPORT PORTC -#define PC2_DDR DDRC -#define PC2_PWM NULL -#undef PC3 -#define PC3_PIN PINC3 -#define PC3_RPORT PINC -#define PC3_WPORT PORTC -#define PC3_DDR DDRC -#define PC3_PWM NULL -#undef PC4 -#define PC4_PIN PINC4 -#define PC4_RPORT PINC -#define PC4_WPORT PORTC -#define PC4_DDR DDRC -#define PC4_PWM NULL -#undef PC5 -#define PC5_PIN PINC5 -#define PC5_RPORT PINC -#define PC5_WPORT PORTC -#define PC5_DDR DDRC -#define PC5_PWM NULL -#undef PC6 -#define PC6_PIN PINC6 -#define PC6_RPORT PINC -#define PC6_WPORT PORTC -#define PC6_DDR DDRC -#define PC6_PWM NULL -#undef PC7 -#define PC7_PIN PINC7 -#define PC7_RPORT PINC -#define PC7_WPORT PORTC -#define PC7_DDR DDRC -#define PC7_PWM NULL - -#undef PD0 -#define PD0_PIN PIND0 -#define PD0_RPORT PIND -#define PD0_WPORT PORTD -#define PD0_DDR DDRD -#define PD0_PWM NULL -#undef PD1 -#define PD1_PIN PIND1 -#define PD1_RPORT PIND -#define PD1_WPORT PORTD -#define PD1_DDR DDRD -#define PD1_PWM NULL -#undef PD2 -#define PD2_PIN PIND2 -#define PD2_RPORT PIND -#define PD2_WPORT PORTD -#define PD2_DDR DDRD -#define PD2_PWM NULL -#undef PD3 -#define PD3_PIN PIND3 -#define PD3_RPORT PIND -#define PD3_WPORT PORTD -#define PD3_DDR DDRD -#define PD3_PWM NULL -#undef PD4 -#define PD4_PIN PIND4 -#define PD4_RPORT PIND -#define PD4_WPORT PORTD -#define PD4_DDR DDRD -#define PD4_PWM NULL -#undef PD5 -#define PD5_PIN PIND5 -#define PD5_RPORT PIND -#define PD5_WPORT PORTD -#define PD5_DDR DDRD -#define PD5_PWM NULL -#undef PD6 -#define PD6_PIN PIND6 -#define PD6_RPORT PIND -#define PD6_WPORT PORTD -#define PD6_DDR DDRD -#define PD6_PWM NULL -#undef PD7 -#define PD7_PIN PIND7 -#define PD7_RPORT PIND -#define PD7_WPORT PORTD -#define PD7_DDR DDRD -#define PD7_PWM NULL - -#undef PE0 -#define PE0_PIN PINE0 -#define PE0_RPORT PINE -#define PE0_WPORT PORTE -#define PE0_DDR DDRE -#define PE0_PWM NULL -#undef PE1 -#define PE1_PIN PINE1 -#define PE1_RPORT PINE -#define PE1_WPORT PORTE -#define PE1_DDR DDRE -#define PE1_PWM NULL -#undef PE2 -#define PE2_PIN PINE2 -#define PE2_RPORT PINE -#define PE2_WPORT PORTE -#define PE2_DDR DDRE -#define PE2_PWM NULL -#undef PE3 -#define PE3_PIN PINE3 -#define PE3_RPORT PINE -#define PE3_WPORT PORTE -#define PE3_DDR DDRE -#define PE3_PWM &OCR3AL -#undef PE4 -#define PE4_PIN PINE4 -#define PE4_RPORT PINE -#define PE4_WPORT PORTE -#define PE4_DDR DDRE -#define PE4_PWM &OCR3BL -#undef PE5 -#define PE5_PIN PINE5 -#define PE5_RPORT PINE -#define PE5_WPORT PORTE -#define PE5_DDR DDRE -#define PE5_PWM &OCR3CL -#undef PE6 -#define PE6_PIN PINE6 -#define PE6_RPORT PINE -#define PE6_WPORT PORTE -#define PE6_DDR DDRE -#define PE6_PWM NULL -#undef PE7 -#define PE7_PIN PINE7 -#define PE7_RPORT PINE -#define PE7_WPORT PORTE -#define PE7_DDR DDRE -#define PE7_PWM NULL - -#undef PF0 -#define PF0_PIN PINF0 -#define PF0_RPORT PINF -#define PF0_WPORT PORTF -#define PF0_DDR DDRF -#define PF0_PWM NULL -#undef PF1 -#define PF1_PIN PINF1 -#define PF1_RPORT PINF -#define PF1_WPORT PORTF -#define PF1_DDR DDRF -#define PF1_PWM NULL -#undef PF2 -#define PF2_PIN PINF2 -#define PF2_RPORT PINF -#define PF2_WPORT PORTF -#define PF2_DDR DDRF -#define PF2_PWM NULL -#undef PF3 -#define PF3_PIN PINF3 -#define PF3_RPORT PINF -#define PF3_WPORT PORTF -#define PF3_DDR DDRF -#define PF3_PWM NULL -#undef PF4 -#define PF4_PIN PINF4 -#define PF4_RPORT PINF -#define PF4_WPORT PORTF -#define PF4_DDR DDRF -#define PF4_PWM NULL -#undef PF5 -#define PF5_PIN PINF5 -#define PF5_RPORT PINF -#define PF5_WPORT PORTF -#define PF5_DDR DDRF -#define PF5_PWM NULL -#undef PF6 -#define PF6_PIN PINF6 -#define PF6_RPORT PINF -#define PF6_WPORT PORTF -#define PF6_DDR DDRF -#define PF6_PWM NULL -#undef PF7 -#define PF7_PIN PINF7 -#define PF7_RPORT PINF -#define PF7_WPORT PORTF -#define PF7_DDR DDRF -#define PF7_PWM NULL - -#undef PG0 -#define PG0_PIN PING0 -#define PG0_RPORT PING -#define PG0_WPORT PORTG -#define PG0_DDR DDRG -#define PG0_PWM NULL -#undef PG1 -#define PG1_PIN PING1 -#define PG1_RPORT PING -#define PG1_WPORT PORTG -#define PG1_DDR DDRG -#define PG1_PWM NULL -#undef PG2 -#define PG2_PIN PING2 -#define PG2_RPORT PING -#define PG2_WPORT PORTG -#define PG2_DDR DDRG -#define PG2_PWM NULL -#undef PG3 -#define PG3_PIN PING3 -#define PG3_RPORT PING -#define PG3_WPORT PORTG -#define PG3_DDR DDRG -#define PG3_PWM NULL -#undef PG4 -#define PG4_PIN PING4 -#define PG4_RPORT PING -#define PG4_WPORT PORTG -#define PG4_DDR DDRG -#define PG4_PWM NULL -#undef PG5 -#define PG5_PIN PING5 -#define PG5_RPORT PING -#define PG5_WPORT PORTG -#define PG5_DDR DDRG -#define PG5_PWM &OCR0B -#undef PG6 -#define PG6_PIN PING6 -#define PG6_RPORT PING -#define PG6_WPORT PORTG -#define PG6_DDR DDRG -#define PG6_PWM NULL -#undef PG7 -#define PG7_PIN PING7 -#define PG7_RPORT PING -#define PG7_WPORT PORTG -#define PG7_DDR DDRG -#define PG7_PWM NULL - -#undef PH0 -#define PH0_PIN PINH0 -#define PH0_RPORT PINH -#define PH0_WPORT PORTH -#define PH0_DDR DDRH -#define PH0_PWM NULL -#undef PH1 -#define PH1_PIN PINH1 -#define PH1_RPORT PINH -#define PH1_WPORT PORTH -#define PH1_DDR DDRH -#define PH1_PWM NULL -#undef PH2 -#define PH2_PIN PINH2 -#define PH2_RPORT PINH -#define PH2_WPORT PORTH -#define PH2_DDR DDRH -#define PH2_PWM NULL -#undef PH3 -#define PH3_PIN PINH3 -#define PH3_RPORT PINH -#define PH3_WPORT PORTH -#define PH3_DDR DDRH -#define PH3_PWM &OCR4AL -#undef PH4 -#define PH4_PIN PINH4 -#define PH4_RPORT PINH -#define PH4_WPORT PORTH -#define PH4_DDR DDRH -#define PH4_PWM &OCR4BL -#undef PH5 -#define PH5_PIN PINH5 -#define PH5_RPORT PINH -#define PH5_WPORT PORTH -#define PH5_DDR DDRH -#define PH5_PWM &OCR4CL -#undef PH6 -#define PH6_PIN PINH6 -#define PH6_RPORT PINH -#define PH6_WPORT PORTH -#define PH6_DDR DDRH -#define PH6_PWM &OCR2B -#undef PH7 -#define PH7_PIN PINH7 -#define PH7_RPORT PINH -#define PH7_WPORT PORTH -#define PH7_DDR DDRH -#define PH7_PWM NULL - -#undef PJ0 -#define PJ0_PIN PINJ0 -#define PJ0_RPORT PINJ -#define PJ0_WPORT PORTJ -#define PJ0_DDR DDRJ -#define PJ0_PWM NULL -#undef PJ1 -#define PJ1_PIN PINJ1 -#define PJ1_RPORT PINJ -#define PJ1_WPORT PORTJ -#define PJ1_DDR DDRJ -#define PJ1_PWM NULL -#undef PJ2 -#define PJ2_PIN PINJ2 -#define PJ2_RPORT PINJ -#define PJ2_WPORT PORTJ -#define PJ2_DDR DDRJ -#define PJ2_PWM NULL -#undef PJ3 -#define PJ3_PIN PINJ3 -#define PJ3_RPORT PINJ -#define PJ3_WPORT PORTJ -#define PJ3_DDR DDRJ -#define PJ3_PWM NULL -#undef PJ4 -#define PJ4_PIN PINJ4 -#define PJ4_RPORT PINJ -#define PJ4_WPORT PORTJ -#define PJ4_DDR DDRJ -#define PJ4_PWM NULL -#undef PJ5 -#define PJ5_PIN PINJ5 -#define PJ5_RPORT PINJ -#define PJ5_WPORT PORTJ -#define PJ5_DDR DDRJ -#define PJ5_PWM NULL -#undef PJ6 -#define PJ6_PIN PINJ6 -#define PJ6_RPORT PINJ -#define PJ6_WPORT PORTJ -#define PJ6_DDR DDRJ -#define PJ6_PWM NULL -#undef PJ7 -#define PJ7_PIN PINJ7 -#define PJ7_RPORT PINJ -#define PJ7_WPORT PORTJ -#define PJ7_DDR DDRJ -#define PJ7_PWM NULL - -#undef PK0 -#define PK0_PIN PINK0 -#define PK0_RPORT PINK -#define PK0_WPORT PORTK -#define PK0_DDR DDRK -#define PK0_PWM NULL -#undef PK1 -#define PK1_PIN PINK1 -#define PK1_RPORT PINK -#define PK1_WPORT PORTK -#define PK1_DDR DDRK -#define PK1_PWM NULL -#undef PK2 -#define PK2_PIN PINK2 -#define PK2_RPORT PINK -#define PK2_WPORT PORTK -#define PK2_DDR DDRK -#define PK2_PWM NULL -#undef PK3 -#define PK3_PIN PINK3 -#define PK3_RPORT PINK -#define PK3_WPORT PORTK -#define PK3_DDR DDRK -#define PK3_PWM NULL -#undef PK4 -#define PK4_PIN PINK4 -#define PK4_RPORT PINK -#define PK4_WPORT PORTK -#define PK4_DDR DDRK -#define PK4_PWM NULL -#undef PK5 -#define PK5_PIN PINK5 -#define PK5_RPORT PINK -#define PK5_WPORT PORTK -#define PK5_DDR DDRK -#define PK5_PWM NULL -#undef PK6 -#define PK6_PIN PINK6 -#define PK6_RPORT PINK -#define PK6_WPORT PORTK -#define PK6_DDR DDRK -#define PK6_PWM NULL -#undef PK7 -#define PK7_PIN PINK7 -#define PK7_RPORT PINK -#define PK7_WPORT PORTK -#define PK7_DDR DDRK -#define PK7_PWM NULL - -#undef PL0 -#define PL0_PIN PINL0 -#define PL0_RPORT PINL -#define PL0_WPORT PORTL -#define PL0_DDR DDRL -#define PL0_PWM NULL -#undef PL1 -#define PL1_PIN PINL1 -#define PL1_RPORT PINL -#define PL1_WPORT PORTL -#define PL1_DDR DDRL -#define PL1_PWM NULL -#undef PL2 -#define PL2_PIN PINL2 -#define PL2_RPORT PINL -#define PL2_WPORT PORTL -#define PL2_DDR DDRL -#define PL2_PWM NULL -#undef PL3 -#define PL3_PIN PINL3 -#define PL3_RPORT PINL -#define PL3_WPORT PORTL -#define PL3_DDR DDRL -#define PL3_PWM &OCR5AL -#undef PL4 -#define PL4_PIN PINL4 -#define PL4_RPORT PINL -#define PL4_WPORT PORTL -#define PL4_DDR DDRL -#define PL4_PWM &OCR5BL -#undef PL5 -#define PL5_PIN PINL5 -#define PL5_RPORT PINL -#define PL5_WPORT PORTL -#define PL5_DDR DDRL -#define PL5_PWM &OCR5CL -#undef PL6 -#define PL6_PIN PINL6 -#define PL6_RPORT PINL -#define PL6_WPORT PORTL -#define PL6_DDR DDRL -#define PL6_PWM NULL -#undef PL7 -#define PL7_PIN PINL7 -#define PL7_RPORT PINL -#define PL7_WPORT PORTL -#define PL7_DDR DDRL -#define PL7_PWM NULL - -#endif - -#if defined (__AVR_AT90USB1287__) -// SPI -#define SCK DIO9 -#define MISO DIO11 -#define MOSI DIO10 -#define SS DIO8 - -// change for your board -#define DEBUG_LED DIO31 /* led D5 red */ - -/* -pins -*/ -#define DIO0_PIN PINA0 -#define DIO0_RPORT PINA -#define DIO0_WPORT PORTA -#define DIO0_PWM NULL -#define DIO0_DDR DDRA - -#define DIO1_PIN PINA1 -#define DIO1_RPORT PINA -#define DIO1_WPORT PORTA -#define DIO1_PWM NULL -#define DIO1_DDR DDRA - -#define DIO2_PIN PINA2 -#define DIO2_RPORT PINA -#define DIO2_WPORT PORTA -#define DIO2_PWM NULL -#define DIO2_DDR DDRA - -#define DIO3_PIN PINA3 -#define DIO3_RPORT PINA -#define DIO3_WPORT PORTA -#define DIO3_PWM NULL -#define DIO3_DDR DDRA - -#define DIO4_PIN PINA4 -#define DIO4_RPORT PINA -#define DIO4_WPORT PORTA -#define DIO4_PWM NULL -#define DIO4_DDR DDRA - -#define DIO5_PIN PINA5 -#define DIO5_RPORT PINA -#define DIO5_WPORT PORTA -#define DIO5_PWM NULL -#define DIO5_DDR DDRA - -#define DIO6_PIN PINA6 -#define DIO6_RPORT PINA -#define DIO6_WPORT PORTA -#define DIO6_PWM NULL -#define DIO6_DDR DDRA - -#define DIO7_PIN PINA7 -#define DIO7_RPORT PINA -#define DIO7_WPORT PORTA -#define DIO7_PWM NULL -#define DIO7_DDR DDRA - -#define DIO8_PIN PINB0 -#define DIO8_RPORT PINB -#define DIO8_WPORT PORTB -#define DIO8_PWM NULL -#define DIO8_DDR DDRB - -#define DIO9_PIN PINB1 -#define DIO9_RPORT PINB -#define DIO9_WPORT PORTB -#define DIO9_PWM NULL -#define DIO9_DDR DDRB - -#define DIO10_PIN PINB2 -#define DIO10_RPORT PINB -#define DIO10_WPORT PORTB -#define DIO10_PWM NULL -#define DIO10_DDR DDRB - -#define DIO11_PIN PINB3 -#define DIO11_RPORT PINB -#define DIO11_WPORT PORTB -#define DIO11_PWM NULL -#define DIO11_DDR DDRB - -#define DIO12_PIN PINB4 -#define DIO12_RPORT PINB -#define DIO12_WPORT PORTB -#define DIO12_PWM NULL -#define DIO12_DDR DDRB - -#define DIO13_PIN PINB5 -#define DIO13_RPORT PINB -#define DIO13_WPORT PORTB -#define DIO13_PWM NULL -#define DIO13_DDR DDRB - -#define DIO14_PIN PINB6 -#define DIO14_RPORT PINB -#define DIO14_WPORT PORTB -#define DIO14_PWM NULL -#define DIO14_DDR DDRB - -#define DIO15_PIN PINB7 -#define DIO15_RPORT PINB -#define DIO15_WPORT PORTB -#define DIO15_PWM NULL -#define DIO15_DDR DDRB - -#define DIO16_PIN PINC0 -#define DIO16_RPORT PINC -#define DIO16_WPORT PORTC -#define DIO16_PWM NULL -#define DIO16_DDR DDRC - -#define DIO17_PIN PINC1 -#define DIO17_RPORT PINC -#define DIO17_WPORT PORTC -#define DIO17_PWM NULL -#define DIO17_DDR DDRC - -#define DIO18_PIN PINC2 -#define DIO18_RPORT PINC -#define DIO18_WPORT PORTC -#define DIO18_PWM NULL -#define DIO18_DDR DDRC - -#define DIO19_PIN PINC3 -#define DIO19_RPORT PINC -#define DIO19_WPORT PORTC -#define DIO19_PWM NULL -#define DIO19_DDR DDRC - -#define DIO20_PIN PINC4 -#define DIO20_RPORT PINC -#define DIO20_WPORT PORTC -#define DIO20_PWM NULL -#define DIO20_DDR DDRC - -#define DIO21_PIN PINC5 -#define DIO21_RPORT PINC -#define DIO21_WPORT PORTC -#define DIO21_PWM NULL -#define DIO21_DDR DDRC - -#define DIO22_PIN PINC6 -#define DIO22_RPORT PINC -#define DIO22_WPORT PORTC -#define DIO22_PWM NULL -#define DIO22_DDR DDRC - -#define DIO23_PIN PINC7 -#define DIO23_RPORT PINC -#define DIO23_WPORT PORTC -#define DIO23_PWM NULL -#define DIO23_DDR DDRC - -#define DIO24_PIN PIND0 -#define DIO24_RPORT PIND -#define DIO24_WPORT PORTD -#define DIO24_PWM NULL -#define DIO24_DDR DDRD - -#define DIO25_PIN PIND1 -#define DIO25_RPORT PIND -#define DIO25_WPORT PORTD -#define DIO25_PWM NULL -#define DIO25_DDR DDRD - -#define DIO26_PIN PIND2 -#define DIO26_RPORT PIND -#define DIO26_WPORT PORTD -#define DIO26_PWM NULL -#define DIO26_DDR DDRD - -#define DIO27_PIN PIND3 -#define DIO27_RPORT PIND -#define DIO27_WPORT PORTD -#define DIO27_PWM NULL -#define DIO27_DDR DDRD - -#define DIO28_PIN PIND4 -#define DIO28_RPORT PIND -#define DIO28_WPORT PORTD -#define DIO28_PWM NULL -#define DIO28_DDR DDRD - -#define DIO29_PIN PIND5 -#define DIO29_RPORT PIND -#define DIO29_WPORT PORTD -#define DIO29_PWM NULL -#define DIO29_DDR DDRD - -#define DIO30_PIN PIND6 -#define DIO30_RPORT PIND -#define DIO30_WPORT PORTD -#define DIO30_PWM NULL -#define DIO30_DDR DDRD - -#define DIO31_PIN PIND7 -#define DIO31_RPORT PIND -#define DIO31_WPORT PORTD -#define DIO31_PWM NULL -#define DIO31_DDR DDRD - - -#define DIO32_PIN PINE0 -#define DIO32_RPORT PINE -#define DIO32_WPORT PORTE -#define DIO32_PWM NULL -#define DIO32_DDR DDRE - -#define DIO33_PIN PINE1 -#define DIO33_RPORT PINE -#define DIO33_WPORT PORTE -#define DIO33_PWM NULL -#define DIO33_DDR DDRE - -#define DIO34_PIN PINE2 -#define DIO34_RPORT PINE -#define DIO34_WPORT PORTE -#define DIO34_PWM NULL -#define DIO34_DDR DDRE - -#define DIO35_PIN PINE3 -#define DIO35_RPORT PINE -#define DIO35_WPORT PORTE -#define DIO35_PWM NULL -#define DIO35_DDR DDRE - -#define DIO36_PIN PINE4 -#define DIO36_RPORT PINE -#define DIO36_WPORT PORTE -#define DIO36_PWM NULL -#define DIO36_DDR DDRE - -#define DIO37_PIN PINE5 -#define DIO37_RPORT PINE -#define DIO37_WPORT PORTE -#define DIO37_PWM NULL -#define DIO37_DDR DDRE - -#define DIO38_PIN PINE6 -#define DIO38_RPORT PINE -#define DIO38_WPORT PORTE -#define DIO38_PWM NULL -#define DIO38_DDR DDRE - -#define DIO39_PIN PINE7 -#define DIO39_RPORT PINE -#define DIO39_WPORT PORTE -#define DIO39_PWM NULL -#define DIO39_DDR DDRE - -#define AIO0_PIN PINF0 -#define AIO0_RPORT PINF -#define AIO0_WPORT PORTF -#define AIO0_PWM NULL -#define AIO0_DDR DDRF - -#define AIO1_PIN PINF1 -#define AIO1_RPORT PINF -#define AIO1_WPORT PORTF -#define AIO1_PWM NULL -#define AIO1_DDR DDRF - -#define AIO2_PIN PINF2 -#define AIO2_RPORT PINF -#define AIO2_WPORT PORTF -#define AIO2_PWM NULL -#define AIO2_DDR DDRF - -#define AIO3_PIN PINF3 -#define AIO3_RPORT PINF -#define AIO3_WPORT PORTF -#define AIO3_PWM NULL -#define AIO3_DDR DDRF - -#define AIO4_PIN PINF4 -#define AIO4_RPORT PINF -#define AIO4_WPORT PORTF -#define AIO4_PWM NULL -#define AIO4_DDR DDRF - -#define AIO5_PIN PINF5 -#define AIO5_RPORT PINF -#define AIO5_WPORT PORTF -#define AIO5_PWM NULL -#define AIO5_DDR DDRF - -#define AIO6_PIN PINF6 -#define AIO6_RPORT PINF -#define AIO6_WPORT PORTF -#define AIO6_PWM NULL -#define AIO6_DDR DDRF - -#define AIO7_PIN PINF7 -#define AIO7_RPORT PINF -#define AIO7_WPORT PORTF -#define AIO7_PWM NULL -#define AIO7_DDR DDRF - -#define DIO40_PIN PINF0 -#define DIO40_RPORT PINF -#define DIO40_WPORT PORTF -#define DIO40_PWM NULL -#define DIO40_DDR DDRF - -#define DIO41_PIN PINF1 -#define DIO41_RPORT PINF -#define DIO41_WPORT PORTF -#define DIO41_PWM NULL -#define DIO41_DDR DDRF - -#define DIO42_PIN PINF2 -#define DIO42_RPORT PINF -#define DIO42_WPORT PORTF -#define DIO42_PWM NULL -#define DIO42_DDR DDRF - -#define DIO43_PIN PINF3 -#define DIO43_RPORT PINF -#define DIO43_WPORT PORTF -#define DIO43_PWM NULL -#define DIO43_DDR DDRF - -#define DIO44_PIN PINF4 -#define DIO44_RPORT PINF -#define DIO44_WPORT PORTF -#define DIO44_PWM NULL -#define DIO44_DDR DDRF - -#define DIO45_PIN PINF5 -#define DIO45_RPORT PINF -#define DIO45_WPORT PORTF -#define DIO45_PWM NULL -#define DIO45_DDR DDRF - -#define DIO46_PIN PINF6 -#define DIO46_RPORT PINF -#define DIO46_WPORT PORTF -#define DIO46_PWM NULL -#define DIO46_DDR DDRF - -#define DIO47_PIN PINF7 -#define DIO47_RPORT PINF -#define DIO47_WPORT PORTF -#define DIO47_PWM NULL -#define DIO47_DDR DDRF - - - -#undef PA0 -#define PA0_PIN PINA0 -#define PA0_RPORT PINA -#define PA0_WPORT PORTA -#define PA0_PWM NULL -#define PA0_DDR DDRA -#undef PA1 -#define PA1_PIN PINA1 -#define PA1_RPORT PINA -#define PA1_WPORT PORTA -#define PA1_PWM NULL -#define PA1_DDR DDRA -#undef PA2 -#define PA2_PIN PINA2 -#define PA2_RPORT PINA -#define PA2_WPORT PORTA -#define PA2_PWM NULL -#define PA2_DDR DDRA -#undef PA3 -#define PA3_PIN PINA3 -#define PA3_RPORT PINA -#define PA3_WPORT PORTA -#define PA3_PWM NULL -#define PA3_DDR DDRA -#undef PA4 -#define PA4_PIN PINA4 -#define PA4_RPORT PINA -#define PA4_WPORT PORTA -#define PA4_PWM NULL -#define PA4_DDR DDRA -#undef PA5 -#define PA5_PIN PINA5 -#define PA5_RPORT PINA -#define PA5_WPORT PORTA -#define PA5_PWM NULL -#define PA5_DDR DDRA -#undef PA6 -#define PA6_PIN PINA6 -#define PA6_RPORT PINA -#define PA6_WPORT PORTA -#define PA6_PWM NULL -#define PA6_DDR DDRA -#undef PA7 -#define PA7_PIN PINA7 -#define PA7_RPORT PINA -#define PA7_WPORT PORTA -#define PA7_PWM NULL -#define PA7_DDR DDRA - -#undef PB0 -#define PB0_PIN PINB0 -#define PB0_RPORT PINB -#define PB0_WPORT PORTB -#define PB0_PWM NULL -#define PB0_DDR DDRB -#undef PB1 -#define PB1_PIN PINB1 -#define PB1_RPORT PINB -#define PB1_WPORT PORTB -#define PB1_PWM NULL -#define PB1_DDR DDRB -#undef PB2 -#define PB2_PIN PINB2 -#define PB2_RPORT PINB -#define PB2_WPORT PORTB -#define PB2_PWM NULL -#define PB2_DDR DDRB -#undef PB3 -#define PB3_PIN PINB3 -#define PB3_RPORT PINB -#define PB3_WPORT PORTB -#define PB3_PWM NULL -#define PB3_DDR DDRB -#undef PB4 -#define PB4_PIN PINB4 -#define PB4_RPORT PINB -#define PB4_WPORT PORTB -#define PB4_PWM NULL -#define PB4_DDR DDRB -#undef PB5 -#define PB5_PIN PINB5 -#define PB5_RPORT PINB -#define PB5_WPORT PORTB -#define PB5_PWM NULL -#define PB5_DDR DDRB -#undef PB6 -#define PB6_PIN PINB6 -#define PB6_RPORT PINB -#define PB6_WPORT PORTB -#define PB6_PWM NULL -#define PB6_DDR DDRB -#undef PB7 -#define PB7_PIN PINB7 -#define PB7_RPORT PINB -#define PB7_WPORT PORTB -#define PB7_PWM NULL -#define PB7_DDR DDRB - -#undef PC0 -#define PC0_PIN PINC0 -#define PC0_RPORT PINC -#define PC0_WPORT PORTC -#define PC0_PWM NULL -#define PC0_DDR DDRC -#undef PC1 -#define PC1_PIN PINC1 -#define PC1_RPORT PINC -#define PC1_WPORT PORTC -#define PC1_PWM NULL -#define PC1_DDR DDRC -#undef PC2 -#define PC2_PIN PINC2 -#define PC2_RPORT PINC -#define PC2_WPORT PORTC -#define PC2_PWM NULL -#define PC2_DDR DDRC -#undef PC3 -#define PC3_PIN PINC3 -#define PC3_RPORT PINC -#define PC3_WPORT PORTC -#define PC3_PWM NULL -#define PC3_DDR DDRC -#undef PC4 -#define PC4_PIN PINC4 -#define PC4_RPORT PINC -#define PC4_WPORT PORTC -#define PC4_PWM NULL -#define PC4_DDR DDRC -#undef PC5 -#define PC5_PIN PINC5 -#define PC5_RPORT PINC -#define PC5_WPORT PORTC -#define PC5_PWM NULL -#define PC5_DDR DDRC -#undef PC6 -#define PC6_PIN PINC6 -#define PC6_RPORT PINC -#define PC6_WPORT PORTC -#define PC6_PWM NULL -#define PC6_DDR DDRC -#undef PC7 -#define PC7_PIN PINC7 -#define PC7_RPORT PINC -#define PC7_WPORT PORTC -#define PC7_PWM NULL -#define PC7_DDR DDRC - -#undef PD0 -#define PD0_PIN PIND0 -#define PD0_RPORT PIND -#define PD0_WPORT PORTD -#define PD0_PWM NULL -#define PD0_DDR DDRD -#undef PD1 -#define PD1_PIN PIND1 -#define PD1_RPORT PIND -#define PD1_WPORT PORTD -#define PD1_PWM NULL -#define PD1_DDR DDRD -#undef PD2 -#define PD2_PIN PIND2 -#define PD2_RPORT PIND -#define PD2_WPORT PORTD -#define PD2_PWM NULL -#define PD2_DDR DDRD -#undef PD3 -#define PD3_PIN PIND3 -#define PD3_RPORT PIND -#define PD3_WPORT PORTD -#define PD3_PWM NULL -#define PD3_DDR DDRD -#undef PD4 -#define PD4_PIN PIND4 -#define PD4_RPORT PIND -#define PD4_WPORT PORTD -#define PD4_PWM NULL -#define PD4_DDR DDRD -#undef PD5 -#define PD5_PIN PIND5 -#define PD5_RPORT PIND -#define PD5_WPORT PORTD -#define PD5_PWM NULL -#define PD5_DDR DDRD -#undef PD6 -#define PD6_PIN PIND6 -#define PD6_RPORT PIND -#define PD6_WPORT PORTD -#define PD6_PWM NULL -#define PD6_DDR DDRD -#undef PD7 -#define PD7_PIN PIND7 -#define PD7_RPORT PIND -#define PD7_WPORT PORTD -#define PD7_PWM NULL -#define PD7_DDR DDRD - -#undef PE0 -#define PE0_PIN PINE0 -#define PE0_RPORT PINE -#define PE0_WPORT PORTE -#define PE0_PWM NULL -#define PE0_DDR DDRE -#undef PE1 -#define PE1_PIN PINE1 -#define PE1_RPORT PINE -#define PE1_WPORT PORTE -#define PE1_PWM NULL -#define PE1_DDR DDRE -#undef PE2 -#define PE2_PIN PINE2 -#define PE2_RPORT PINE -#define PE2_WPORT PORTE -#define PE2_PWM NULL -#define PE2_DDR DDRE -#undef PE3 -#define PE3_PIN PINE3 -#define PE3_RPORT PINE -#define PE3_WPORT PORTE -#define PE3_PWM NULL -#define PE3_DDR DDRE -#undef PE4 -#define PE4_PIN PINE4 -#define PE4_RPORT PINE -#define PE4_WPORT PORTE -#define PE4_PWM NULL -#define PE4_DDR DDRE -#undef PE5 -#define PE5_PIN PINE5 -#define PE5_RPORT PINE -#define PE5_WPORT PORTE -#define PE5_PWM NULL -#define PE5_DDR DDRE -#undef PE6 -#define PE6_PIN PINE6 -#define PE6_RPORT PINE -#define PE6_WPORT PORTE -#define PE6_PWM NULL -#define PE6_DDR DDRE -#undef PE7 -#define PE7_PIN PINE7 -#define PE7_RPORT PINE -#define PE7_WPORT PORTE -#define PE7_PWM NULL -#define PE7_DDR DDRE - -#undef PF0 -#define PF0_PIN PINF0 -#define PF0_RPORT PINF -#define PF0_WPORT PORTF -#define PF0_PWM NULL -#define PF0_DDR DDRF -#undef PF1 -#define PF1_PIN PINF1 -#define PF1_RPORT PINF -#define PF1_WPORT PORTF -#define PF1_PWM NULL -#define PF1_DDR DDRF -#undef PF2 -#define PF2_PIN PINF2 -#define PF2_RPORT PINF -#define PF2_WPORT PORTF -#define PF2_PWM NULL -#define PF2_DDR DDRF -#undef PF3 -#define PF3_PIN PINF3 -#define PF3_RPORT PINF -#define PF3_WPORT PORTF -#define PF3_PWM NULL -#define PF3_DDR DDRF -#undef PF4 -#define PF4_PIN PINF4 -#define PF4_RPORT PINF -#define PF4_WPORT PORTF -#define PF4_PWM NULL -#define PF4_DDR DDRF -#undef PF5 -#define PF5_PIN PINF5 -#define PF5_RPORT PINF -#define PF5_WPORT PORTF -#define PF5_PWM NULL -#define PF5_DDR DDRF -#undef PF6 -#define PF6_PIN PINF6 -#define PF6_RPORT PINF -#define PF6_WPORT PORTF -#define PF6_PWM NULL -#define PF6_DDR DDRF -#undef PF7 -#define PF7_PIN PINF7 -#define PF7_RPORT PINF -#define PF7_WPORT PORTF -#define PF7_PWM NULL -#define PF7_DDR DDRF -#endif - -#ifndef DIO0_PIN -#error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request -#endif - +/* + This code contibuted by Triffid_Hunter and modified by Kliment + why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html +*/ + +#ifndef _ARDUINO_H +#define _ARDUINO_H + +#include + +/* + utility functions +*/ + +#ifndef MASK +/// MASKING- returns \f$2^PIN\f$ +#define MASK(PIN) (1 << PIN) +#endif + +/* + magic I/O routines + now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0); +*/ + +/// Read a pin +#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN))) +/// write to a pin +// On some boards pins > 0x100 are used. These are not converted to atomic actions. An critical section is needed. + +#define _WRITE_NC(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0) + +#define _WRITE_C(IO, v) do { if (v) { \ + CRITICAL_SECTION_START; \ + {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); }\ + CRITICAL_SECTION_END; \ + }\ + else {\ + CRITICAL_SECTION_START; \ + {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }\ + CRITICAL_SECTION_END; \ + }\ + }\ + while (0) + +#define _WRITE(IO, v) do { if (&(DIO ## IO ## _RPORT) >= (uint8_t *)0x100) {_WRITE_C(IO, v); } else {_WRITE_NC(IO, v); }; } while (0) + +/// toggle a pin +#define _TOGGLE(IO) do {DIO ## IO ## _RPORT = MASK(DIO ## IO ## _PIN); } while (0) + +/// set pin as input +#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0) +/// set pin as output +#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0) + +/// check if pin is an input +#define _GET_INPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) == 0) +/// check if pin is an output +#define _GET_OUTPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) != 0) + +/// check if pin is an timer +#define _GET_TIMER(IO) ((DIO ## IO ## _PWM) + +// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + +/// Read a pin wrapper +#define READ(IO) _READ(IO) +/// Write to a pin wrapper +#define WRITE(IO, v) _WRITE(IO, v) + +/// toggle a pin wrapper +#define TOGGLE(IO) _TOGGLE(IO) + +/// set pin as input wrapper +#define SET_INPUT(IO) _SET_INPUT(IO) +/// set pin as output wrapper +#define SET_OUTPUT(IO) _SET_OUTPUT(IO) + +/// check if pin is an input wrapper +#define GET_INPUT(IO) _GET_INPUT(IO) +/// check if pin is an output wrapper +#define GET_OUTPUT(IO) _GET_OUTPUT(IO) + +/// check if pin is an timer wrapper +#define GET_TIMER(IO) _GET_TIMER(IO) + +/* + ports and functions + + added as necessary or if I feel like it- not a comprehensive list! +*/ + +#if defined (__AVR_ATmega168__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__) +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO13 +#define MISO DIO12 +#define MOSI DIO11 +#define SS DIO10 + +// TWI (I2C) +#define SCL AIO5 +#define SDA AIO4 + +// timers and PWM +#define OC0A DIO6 +#define OC0B DIO5 +#define OC1A DIO9 +#define OC1B DIO10 +#define OC2A DIO11 +#define OC2B DIO3 + +#define DEBUG_LED AIO5 + +/* +pins +*/ + +#define DIO0_PIN PIND0 +#define DIO0_RPORT PIND +#define DIO0_WPORT PORTD +#define DIO0_DDR DDRD +#define DIO0_PWM NULL + +#define DIO1_PIN PIND1 +#define DIO1_RPORT PIND +#define DIO1_WPORT PORTD +#define DIO1_DDR DDRD +#define DIO1_PWM NULL + +#define DIO2_PIN PIND2 +#define DIO2_RPORT PIND +#define DIO2_WPORT PORTD +#define DIO2_DDR DDRD +#define DIO2_PWM NULL + +#define DIO3_PIN PIND3 +#define DIO3_RPORT PIND +#define DIO3_WPORT PORTD +#define DIO3_DDR DDRD +#define DIO3_PWM &OCR2B + +#define DIO4_PIN PIND4 +#define DIO4_RPORT PIND +#define DIO4_WPORT PORTD +#define DIO4_DDR DDRD +#define DIO4_PWM NULL + +#define DIO5_PIN PIND5 +#define DIO5_RPORT PIND +#define DIO5_WPORT PORTD +#define DIO5_DDR DDRD +#define DIO5_PWM &OCR0B + +#define DIO6_PIN PIND6 +#define DIO6_RPORT PIND +#define DIO6_WPORT PORTD +#define DIO6_DDR DDRD +#define DIO6_PWM &OCR0A + +#define DIO7_PIN PIND7 +#define DIO7_RPORT PIND +#define DIO7_WPORT PORTD +#define DIO7_DDR DDRD +#define DIO7_PWM NULL + +#define DIO8_PIN PINB0 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_DDR DDRB +#define DIO8_PWM NULL + +#define DIO9_PIN PINB1 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_DDR DDRB +#define DIO9_PWM NULL + +#define DIO10_PIN PINB2 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM NULL + +#define DIO11_PIN PINB3 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM &OCR2A + +#define DIO12_PIN PINB4 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB5 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM NULL + + +#define DIO14_PIN PINC0 +#define DIO14_RPORT PINC +#define DIO14_WPORT PORTC +#define DIO14_DDR DDRC +#define DIO14_PWM NULL + +#define DIO15_PIN PINC1 +#define DIO15_RPORT PINC +#define DIO15_WPORT PORTC +#define DIO15_DDR DDRC +#define DIO15_PWM NULL + +#define DIO16_PIN PINC2 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC3 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC4 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC5 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC6 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC7 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + + + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM &OCR2A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM NULL + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM &OCR2B + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM &OCR0B + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM &OCR0A + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL +#endif /* _AVR_ATmega{168,328,328P}__ */ + +#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) +// UART +#define RXD DIO8 +#define TXD DIO9 +#define RXD0 DIO8 +#define TXD0 DIO9 + +#define RXD1 DIO10 +#define TXD1 DIO11 + +// SPI +#define SCK DIO7 +#define MISO DIO6 +#define MOSI DIO5 +#define SS DIO4 + +// TWI (I2C) +#define SCL DIO16 +#define SDA DIO17 + +// timers and PWM +#define OC0A DIO3 +#define OC0B DIO4 +#define OC1A DIO13 +#define OC1B DIO12 +#define OC2A DIO15 +#define OC2B DIO14 + +#define DEBUG_LED DIO0 +/* +pins +*/ + +#define DIO0_PIN PINB0 +#define DIO0_RPORT PINB +#define DIO0_WPORT PORTB +#define DIO0_DDR DDRB +#define DIO0_PWM NULL + +#define DIO1_PIN PINB1 +#define DIO1_RPORT PINB +#define DIO1_WPORT PORTB +#define DIO1_DDR DDRB +#define DIO1_PWM NULL + +#define DIO2_PIN PINB2 +#define DIO2_RPORT PINB +#define DIO2_WPORT PORTB +#define DIO2_DDR DDRB +#define DIO2_PWM NULL + +#define DIO3_PIN PINB3 +#define DIO3_RPORT PINB +#define DIO3_WPORT PORTB +#define DIO3_DDR DDRB +#define DIO3_PWM OCR0A + +#define DIO4_PIN PINB4 +#define DIO4_RPORT PINB +#define DIO4_WPORT PORTB +#define DIO4_DDR DDRB +#define DIO4_PWM OCR0B + +#define DIO5_PIN PINB5 +#define DIO5_RPORT PINB +#define DIO5_WPORT PORTB +#define DIO5_DDR DDRB +#define DIO5_PWM NULL + +#define DIO6_PIN PINB6 +#define DIO6_RPORT PINB +#define DIO6_WPORT PORTB +#define DIO6_DDR DDRB +#define DIO6_PWM NULL + +#define DIO7_PIN PINB7 +#define DIO7_RPORT PINB +#define DIO7_WPORT PORTB +#define DIO7_DDR DDRB +#define DIO7_PWM NULL + +#define DIO8_PIN PIND0 +#define DIO8_RPORT PIND +#define DIO8_WPORT PORTD +#define DIO8_DDR DDRD +#define DIO8_PWM NULL + +#define DIO9_PIN PIND1 +#define DIO9_RPORT PIND +#define DIO9_WPORT PORTD +#define DIO9_DDR DDRD +#define DIO9_PWM NULL + +#define DIO10_PIN PIND2 +#define DIO10_RPORT PIND +#define DIO10_WPORT PORTD +#define DIO10_DDR DDRD +#define DIO10_PWM NULL + +#define DIO11_PIN PIND3 +#define DIO11_RPORT PIND +#define DIO11_WPORT PORTD +#define DIO11_DDR DDRD +#define DIO11_PWM NULL + +#define DIO12_PIN PIND4 +#define DIO12_RPORT PIND +#define DIO12_WPORT PORTD +#define DIO12_DDR DDRD +#define DIO12_PWM OCR1B + +#define DIO13_PIN PIND5 +#define DIO13_RPORT PIND +#define DIO13_WPORT PORTD +#define DIO13_DDR DDRD +#define DIO13_PWM OCR1A + +#define DIO14_PIN PIND6 +#define DIO14_RPORT PIND +#define DIO14_WPORT PORTD +#define DIO14_DDR DDRD +#define DIO14_PWM OCR2B + +#define DIO15_PIN PIND7 +#define DIO15_RPORT PIND +#define DIO15_WPORT PORTD +#define DIO15_DDR DDRD +#define DIO15_PWM OCR2A + +#define DIO16_PIN PINC0 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC1 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC2 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC3 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC4 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC5 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + +#define DIO22_PIN PINC6 +#define DIO22_RPORT PINC +#define DIO22_WPORT PORTC +#define DIO22_DDR DDRC +#define DIO22_PWM NULL + +#define DIO23_PIN PINC7 +#define DIO23_RPORT PINC +#define DIO23_WPORT PORTC +#define DIO23_DDR DDRC +#define DIO23_PWM NULL + +#define DIO24_PIN PINA7 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA6 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA5 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA4 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA3 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA2 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINA1 +#define DIO30_RPORT PINA +#define DIO30_WPORT PORTA +#define DIO30_DDR DDRA +#define DIO30_PWM NULL + +#define DIO31_PIN PINA0 +#define DIO31_RPORT PINA +#define DIO31_WPORT PORTA +#define DIO31_DDR DDRA +#define DIO31_PWM NULL + +#define AIO0_PIN PINA0 +#define AIO0_RPORT PINA +#define AIO0_WPORT PORTA +#define AIO0_DDR DDRA +#define AIO0_PWM NULL + +#define AIO1_PIN PINA1 +#define AIO1_RPORT PINA +#define AIO1_WPORT PORTA +#define AIO1_DDR DDRA +#define AIO1_PWM NULL + +#define AIO2_PIN PINA2 +#define AIO2_RPORT PINA +#define AIO2_WPORT PORTA +#define AIO2_DDR DDRA +#define AIO2_PWM NULL + +#define AIO3_PIN PINA3 +#define AIO3_RPORT PINA +#define AIO3_WPORT PORTA +#define AIO3_DDR DDRA +#define AIO3_PWM NULL + +#define AIO4_PIN PINA4 +#define AIO4_RPORT PINA +#define AIO4_WPORT PORTA +#define AIO4_DDR DDRA +#define AIO4_PWM NULL + +#define AIO5_PIN PINA5 +#define AIO5_RPORT PINA +#define AIO5_WPORT PORTA +#define AIO5_DDR DDRA +#define AIO5_PWM NULL + +#define AIO6_PIN PINA6 +#define AIO6_RPORT PINA +#define AIO6_WPORT PORTA +#define AIO6_DDR DDRA +#define AIO6_PWM NULL + +#define AIO7_PIN PINA7 +#define AIO7_RPORT PINA +#define AIO7_WPORT PORTA +#define AIO7_DDR DDRA +#define AIO7_PWM NULL + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL + +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL + +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL + +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL + +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL + +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL + +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL + +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM OCR0A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM OCR0B + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM OCR2B + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM OCR2A +#endif /* _AVR_ATmega{644,644P,644PA}__ */ + +#if defined (__AVR_ATmega1280__) || defined (__AVR_ATmega2560__) +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO52 +#define MISO DIO50 +#define MOSI DIO51 +#define SS DIO53 + +// TWI (I2C) +#define SCL DIO21 +#define SDA DIO20 + +// timers and PWM +#define OC0A DIO13 +#define OC0B DIO4 +#define OC1A DIO11 +#define OC1B DIO12 +#define OC2A DIO10 +#define OC2B DIO9 +#define OC3A DIO5 +#define OC3B DIO2 +#define OC3C DIO3 +#define OC4A DIO6 +#define OC4B DIO7 +#define OC4C DIO8 +#define OC5A DIO46 +#define OC5B DIO45 +#define OC5C DIO44 + +// change for your board +#define DEBUG_LED DIO21 + +/* +pins +*/ +#define DIO0_PIN PINE0 +#define DIO0_RPORT PINE +#define DIO0_WPORT PORTE +#define DIO0_DDR DDRE +#define DIO0_PWM NULL + +#define DIO1_PIN PINE1 +#define DIO1_RPORT PINE +#define DIO1_WPORT PORTE +#define DIO1_DDR DDRE +#define DIO1_PWM NULL + +#define DIO2_PIN PINE4 +#define DIO2_RPORT PINE +#define DIO2_WPORT PORTE +#define DIO2_DDR DDRE +#define DIO2_PWM &OCR3BL + +#define DIO3_PIN PINE5 +#define DIO3_RPORT PINE +#define DIO3_WPORT PORTE +#define DIO3_DDR DDRE +#define DIO3_PWM &OCR3CL + +#define DIO4_PIN PING5 +#define DIO4_RPORT PING +#define DIO4_WPORT PORTG +#define DIO4_DDR DDRG +#define DIO4_PWM &OCR0B + +#define DIO5_PIN PINE3 +#define DIO5_RPORT PINE +#define DIO5_WPORT PORTE +#define DIO5_DDR DDRE +#define DIO5_PWM &OCR3AL + +#define DIO6_PIN PINH3 +#define DIO6_RPORT PINH +#define DIO6_WPORT PORTH +#define DIO6_DDR DDRH +#define DIO6_PWM &OCR4AL + +#define DIO7_PIN PINH4 +#define DIO7_RPORT PINH +#define DIO7_WPORT PORTH +#define DIO7_DDR DDRH +#define DIO7_PWM &OCR4BL + +#define DIO8_PIN PINH5 +#define DIO8_RPORT PINH +#define DIO8_WPORT PORTH +#define DIO8_DDR DDRH +#define DIO8_PWM &OCR4CL + +#define DIO9_PIN PINH6 +#define DIO9_RPORT PINH +#define DIO9_WPORT PORTH +#define DIO9_DDR DDRH +#define DIO9_PWM &OCR2B + +#define DIO10_PIN PINB4 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM &OCR2A + +#define DIO11_PIN PINB5 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM NULL + +#define DIO12_PIN PINB6 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB7 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM &OCR0A + +#define DIO14_PIN PINJ1 +#define DIO14_RPORT PINJ +#define DIO14_WPORT PORTJ +#define DIO14_DDR DDRJ +#define DIO14_PWM NULL + +#define DIO15_PIN PINJ0 +#define DIO15_RPORT PINJ +#define DIO15_WPORT PORTJ +#define DIO15_DDR DDRJ +#define DIO15_PWM NULL + +#define DIO16_PIN PINH1 +#define DIO16_RPORT PINH +#define DIO16_WPORT PORTH +#define DIO16_DDR DDRH +#define DIO16_PWM NULL + +#define DIO17_PIN PINH0 +#define DIO17_RPORT PINH +#define DIO17_WPORT PORTH +#define DIO17_DDR DDRH +#define DIO17_PWM NULL + +#define DIO18_PIN PIND3 +#define DIO18_RPORT PIND +#define DIO18_WPORT PORTD +#define DIO18_DDR DDRD +#define DIO18_PWM NULL + +#define DIO19_PIN PIND2 +#define DIO19_RPORT PIND +#define DIO19_WPORT PORTD +#define DIO19_DDR DDRD +#define DIO19_PWM NULL + +#define DIO20_PIN PIND1 +#define DIO20_RPORT PIND +#define DIO20_WPORT PORTD +#define DIO20_DDR DDRD +#define DIO20_PWM NULL + +#define DIO21_PIN PIND0 +#define DIO21_RPORT PIND +#define DIO21_WPORT PORTD +#define DIO21_DDR DDRD +#define DIO21_PWM NULL + +#define DIO22_PIN PINA0 +#define DIO22_RPORT PINA +#define DIO22_WPORT PORTA +#define DIO22_DDR DDRA +#define DIO22_PWM NULL + +#define DIO23_PIN PINA1 +#define DIO23_RPORT PINA +#define DIO23_WPORT PORTA +#define DIO23_DDR DDRA +#define DIO23_PWM NULL + +#define DIO24_PIN PINA2 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA3 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA4 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA5 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA6 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA7 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINC7 +#define DIO30_RPORT PINC +#define DIO30_WPORT PORTC +#define DIO30_DDR DDRC +#define DIO30_PWM NULL + +#define DIO31_PIN PINC6 +#define DIO31_RPORT PINC +#define DIO31_WPORT PORTC +#define DIO31_DDR DDRC +#define DIO31_PWM NULL + +#define DIO32_PIN PINC5 +#define DIO32_RPORT PINC +#define DIO32_WPORT PORTC +#define DIO32_DDR DDRC +#define DIO32_PWM NULL + +#define DIO33_PIN PINC4 +#define DIO33_RPORT PINC +#define DIO33_WPORT PORTC +#define DIO33_DDR DDRC +#define DIO33_PWM NULL + +#define DIO34_PIN PINC3 +#define DIO34_RPORT PINC +#define DIO34_WPORT PORTC +#define DIO34_DDR DDRC +#define DIO34_PWM NULL + +#define DIO35_PIN PINC2 +#define DIO35_RPORT PINC +#define DIO35_WPORT PORTC +#define DIO35_DDR DDRC +#define DIO35_PWM NULL + +#define DIO36_PIN PINC1 +#define DIO36_RPORT PINC +#define DIO36_WPORT PORTC +#define DIO36_DDR DDRC +#define DIO36_PWM NULL + +#define DIO37_PIN PINC0 +#define DIO37_RPORT PINC +#define DIO37_WPORT PORTC +#define DIO37_DDR DDRC +#define DIO37_PWM NULL + +#define DIO38_PIN PIND7 +#define DIO38_RPORT PIND +#define DIO38_WPORT PORTD +#define DIO38_DDR DDRD +#define DIO38_PWM NULL + +#define DIO39_PIN PING2 +#define DIO39_RPORT PING +#define DIO39_WPORT PORTG +#define DIO39_DDR DDRG +#define DIO39_PWM NULL + +#define DIO40_PIN PING1 +#define DIO40_RPORT PING +#define DIO40_WPORT PORTG +#define DIO40_DDR DDRG +#define DIO40_PWM NULL + +#define DIO41_PIN PING0 +#define DIO41_RPORT PING +#define DIO41_WPORT PORTG +#define DIO41_DDR DDRG +#define DIO41_PWM NULL + +#define DIO42_PIN PINL7 +#define DIO42_RPORT PINL +#define DIO42_WPORT PORTL +#define DIO42_DDR DDRL +#define DIO42_PWM NULL + +#define DIO43_PIN PINL6 +#define DIO43_RPORT PINL +#define DIO43_WPORT PORTL +#define DIO43_DDR DDRL +#define DIO43_PWM NULL + +#define DIO44_PIN PINL5 +#define DIO44_RPORT PINL +#define DIO44_WPORT PORTL +#define DIO44_DDR DDRL +#define DIO44_PWM &OCR5CL + +#define DIO45_PIN PINL4 +#define DIO45_RPORT PINL +#define DIO45_WPORT PORTL +#define DIO45_DDR DDRL +#define DIO45_PWM &OCR5BL + +#define DIO46_PIN PINL3 +#define DIO46_RPORT PINL +#define DIO46_WPORT PORTL +#define DIO46_DDR DDRL +#define DIO46_PWM &OCR5AL + +#define DIO47_PIN PINL2 +#define DIO47_RPORT PINL +#define DIO47_WPORT PORTL +#define DIO47_DDR DDRL +#define DIO47_PWM NULL + +#define DIO48_PIN PINL1 +#define DIO48_RPORT PINL +#define DIO48_WPORT PORTL +#define DIO48_DDR DDRL +#define DIO48_PWM NULL + +#define DIO49_PIN PINL0 +#define DIO49_RPORT PINL +#define DIO49_WPORT PORTL +#define DIO49_DDR DDRL +#define DIO49_PWM NULL + +#define DIO50_PIN PINB3 +#define DIO50_RPORT PINB +#define DIO50_WPORT PORTB +#define DIO50_DDR DDRB +#define DIO50_PWM NULL + +#define DIO51_PIN PINB2 +#define DIO51_RPORT PINB +#define DIO51_WPORT PORTB +#define DIO51_DDR DDRB +#define DIO51_PWM NULL + +#define DIO52_PIN PINB1 +#define DIO52_RPORT PINB +#define DIO52_WPORT PORTB +#define DIO52_DDR DDRB +#define DIO52_PWM NULL + +#define DIO53_PIN PINB0 +#define DIO53_RPORT PINB +#define DIO53_WPORT PORTB +#define DIO53_DDR DDRB +#define DIO53_PWM NULL + +#define DIO54_PIN PINF0 +#define DIO54_RPORT PINF +#define DIO54_WPORT PORTF +#define DIO54_DDR DDRF +#define DIO54_PWM NULL + +#define DIO55_PIN PINF1 +#define DIO55_RPORT PINF +#define DIO55_WPORT PORTF +#define DIO55_DDR DDRF +#define DIO55_PWM NULL + +#define DIO56_PIN PINF2 +#define DIO56_RPORT PINF +#define DIO56_WPORT PORTF +#define DIO56_DDR DDRF +#define DIO56_PWM NULL + +#define DIO57_PIN PINF3 +#define DIO57_RPORT PINF +#define DIO57_WPORT PORTF +#define DIO57_DDR DDRF +#define DIO57_PWM NULL + +#define DIO58_PIN PINF4 +#define DIO58_RPORT PINF +#define DIO58_WPORT PORTF +#define DIO58_DDR DDRF +#define DIO58_PWM NULL + +#define DIO59_PIN PINF5 +#define DIO59_RPORT PINF +#define DIO59_WPORT PORTF +#define DIO59_DDR DDRF +#define DIO59_PWM NULL + +#define DIO60_PIN PINF6 +#define DIO60_RPORT PINF +#define DIO60_WPORT PORTF +#define DIO60_DDR DDRF +#define DIO60_PWM NULL + +#define DIO61_PIN PINF7 +#define DIO61_RPORT PINF +#define DIO61_WPORT PORTF +#define DIO61_DDR DDRF +#define DIO61_PWM NULL + +#define DIO62_PIN PINK0 +#define DIO62_RPORT PINK +#define DIO62_WPORT PORTK +#define DIO62_DDR DDRK +#define DIO62_PWM NULL + +#define DIO63_PIN PINK1 +#define DIO63_RPORT PINK +#define DIO63_WPORT PORTK +#define DIO63_DDR DDRK +#define DIO63_PWM NULL + +#define DIO64_PIN PINK2 +#define DIO64_RPORT PINK +#define DIO64_WPORT PORTK +#define DIO64_DDR DDRK +#define DIO64_PWM NULL + +#define DIO65_PIN PINK3 +#define DIO65_RPORT PINK +#define DIO65_WPORT PORTK +#define DIO65_DDR DDRK +#define DIO65_PWM NULL + +#define DIO66_PIN PINK4 +#define DIO66_RPORT PINK +#define DIO66_WPORT PORTK +#define DIO66_DDR DDRK +#define DIO66_PWM NULL + +#define DIO67_PIN PINK5 +#define DIO67_RPORT PINK +#define DIO67_WPORT PORTK +#define DIO67_DDR DDRK +#define DIO67_PWM NULL + +#define DIO68_PIN PINK6 +#define DIO68_RPORT PINK +#define DIO68_WPORT PORTK +#define DIO68_DDR DDRK +#define DIO68_PWM NULL + +#define DIO69_PIN PINK7 +#define DIO69_RPORT PINK +#define DIO69_WPORT PORTK +#define DIO69_DDR DDRK +#define DIO69_PWM NULL + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM NULL +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM &OCR2A +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM &OCR0A + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM NULL +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_DDR DDRE +#define PE0_PWM NULL +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_DDR DDRE +#define PE1_PWM NULL +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_DDR DDRE +#define PE2_PWM NULL +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_DDR DDRE +#define PE3_PWM &OCR3AL +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_DDR DDRE +#define PE4_PWM &OCR3BL +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_DDR DDRE +#define PE5_PWM &OCR3CL +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_DDR DDRE +#define PE6_PWM NULL +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_DDR DDRE +#define PE7_PWM NULL + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_DDR DDRF +#define PF0_PWM NULL +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_DDR DDRF +#define PF1_PWM NULL +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_DDR DDRF +#define PF2_PWM NULL +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_DDR DDRF +#define PF3_PWM NULL +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_DDR DDRF +#define PF4_PWM NULL +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_DDR DDRF +#define PF5_PWM NULL +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_DDR DDRF +#define PF6_PWM NULL +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_DDR DDRF +#define PF7_PWM NULL + +#undef PG0 +#define PG0_PIN PING0 +#define PG0_RPORT PING +#define PG0_WPORT PORTG +#define PG0_DDR DDRG +#define PG0_PWM NULL +#undef PG1 +#define PG1_PIN PING1 +#define PG1_RPORT PING +#define PG1_WPORT PORTG +#define PG1_DDR DDRG +#define PG1_PWM NULL +#undef PG2 +#define PG2_PIN PING2 +#define PG2_RPORT PING +#define PG2_WPORT PORTG +#define PG2_DDR DDRG +#define PG2_PWM NULL +#undef PG3 +#define PG3_PIN PING3 +#define PG3_RPORT PING +#define PG3_WPORT PORTG +#define PG3_DDR DDRG +#define PG3_PWM NULL +#undef PG4 +#define PG4_PIN PING4 +#define PG4_RPORT PING +#define PG4_WPORT PORTG +#define PG4_DDR DDRG +#define PG4_PWM NULL +#undef PG5 +#define PG5_PIN PING5 +#define PG5_RPORT PING +#define PG5_WPORT PORTG +#define PG5_DDR DDRG +#define PG5_PWM &OCR0B +#undef PG6 +#define PG6_PIN PING6 +#define PG6_RPORT PING +#define PG6_WPORT PORTG +#define PG6_DDR DDRG +#define PG6_PWM NULL +#undef PG7 +#define PG7_PIN PING7 +#define PG7_RPORT PING +#define PG7_WPORT PORTG +#define PG7_DDR DDRG +#define PG7_PWM NULL + +#undef PH0 +#define PH0_PIN PINH0 +#define PH0_RPORT PINH +#define PH0_WPORT PORTH +#define PH0_DDR DDRH +#define PH0_PWM NULL +#undef PH1 +#define PH1_PIN PINH1 +#define PH1_RPORT PINH +#define PH1_WPORT PORTH +#define PH1_DDR DDRH +#define PH1_PWM NULL +#undef PH2 +#define PH2_PIN PINH2 +#define PH2_RPORT PINH +#define PH2_WPORT PORTH +#define PH2_DDR DDRH +#define PH2_PWM NULL +#undef PH3 +#define PH3_PIN PINH3 +#define PH3_RPORT PINH +#define PH3_WPORT PORTH +#define PH3_DDR DDRH +#define PH3_PWM &OCR4AL +#undef PH4 +#define PH4_PIN PINH4 +#define PH4_RPORT PINH +#define PH4_WPORT PORTH +#define PH4_DDR DDRH +#define PH4_PWM &OCR4BL +#undef PH5 +#define PH5_PIN PINH5 +#define PH5_RPORT PINH +#define PH5_WPORT PORTH +#define PH5_DDR DDRH +#define PH5_PWM &OCR4CL +#undef PH6 +#define PH6_PIN PINH6 +#define PH6_RPORT PINH +#define PH6_WPORT PORTH +#define PH6_DDR DDRH +#define PH6_PWM &OCR2B +#undef PH7 +#define PH7_PIN PINH7 +#define PH7_RPORT PINH +#define PH7_WPORT PORTH +#define PH7_DDR DDRH +#define PH7_PWM NULL + +#undef PJ0 +#define PJ0_PIN PINJ0 +#define PJ0_RPORT PINJ +#define PJ0_WPORT PORTJ +#define PJ0_DDR DDRJ +#define PJ0_PWM NULL +#undef PJ1 +#define PJ1_PIN PINJ1 +#define PJ1_RPORT PINJ +#define PJ1_WPORT PORTJ +#define PJ1_DDR DDRJ +#define PJ1_PWM NULL +#undef PJ2 +#define PJ2_PIN PINJ2 +#define PJ2_RPORT PINJ +#define PJ2_WPORT PORTJ +#define PJ2_DDR DDRJ +#define PJ2_PWM NULL +#undef PJ3 +#define PJ3_PIN PINJ3 +#define PJ3_RPORT PINJ +#define PJ3_WPORT PORTJ +#define PJ3_DDR DDRJ +#define PJ3_PWM NULL +#undef PJ4 +#define PJ4_PIN PINJ4 +#define PJ4_RPORT PINJ +#define PJ4_WPORT PORTJ +#define PJ4_DDR DDRJ +#define PJ4_PWM NULL +#undef PJ5 +#define PJ5_PIN PINJ5 +#define PJ5_RPORT PINJ +#define PJ5_WPORT PORTJ +#define PJ5_DDR DDRJ +#define PJ5_PWM NULL +#undef PJ6 +#define PJ6_PIN PINJ6 +#define PJ6_RPORT PINJ +#define PJ6_WPORT PORTJ +#define PJ6_DDR DDRJ +#define PJ6_PWM NULL +#undef PJ7 +#define PJ7_PIN PINJ7 +#define PJ7_RPORT PINJ +#define PJ7_WPORT PORTJ +#define PJ7_DDR DDRJ +#define PJ7_PWM NULL + +#undef PK0 +#define PK0_PIN PINK0 +#define PK0_RPORT PINK +#define PK0_WPORT PORTK +#define PK0_DDR DDRK +#define PK0_PWM NULL +#undef PK1 +#define PK1_PIN PINK1 +#define PK1_RPORT PINK +#define PK1_WPORT PORTK +#define PK1_DDR DDRK +#define PK1_PWM NULL +#undef PK2 +#define PK2_PIN PINK2 +#define PK2_RPORT PINK +#define PK2_WPORT PORTK +#define PK2_DDR DDRK +#define PK2_PWM NULL +#undef PK3 +#define PK3_PIN PINK3 +#define PK3_RPORT PINK +#define PK3_WPORT PORTK +#define PK3_DDR DDRK +#define PK3_PWM NULL +#undef PK4 +#define PK4_PIN PINK4 +#define PK4_RPORT PINK +#define PK4_WPORT PORTK +#define PK4_DDR DDRK +#define PK4_PWM NULL +#undef PK5 +#define PK5_PIN PINK5 +#define PK5_RPORT PINK +#define PK5_WPORT PORTK +#define PK5_DDR DDRK +#define PK5_PWM NULL +#undef PK6 +#define PK6_PIN PINK6 +#define PK6_RPORT PINK +#define PK6_WPORT PORTK +#define PK6_DDR DDRK +#define PK6_PWM NULL +#undef PK7 +#define PK7_PIN PINK7 +#define PK7_RPORT PINK +#define PK7_WPORT PORTK +#define PK7_DDR DDRK +#define PK7_PWM NULL + +#undef PL0 +#define PL0_PIN PINL0 +#define PL0_RPORT PINL +#define PL0_WPORT PORTL +#define PL0_DDR DDRL +#define PL0_PWM NULL +#undef PL1 +#define PL1_PIN PINL1 +#define PL1_RPORT PINL +#define PL1_WPORT PORTL +#define PL1_DDR DDRL +#define PL1_PWM NULL +#undef PL2 +#define PL2_PIN PINL2 +#define PL2_RPORT PINL +#define PL2_WPORT PORTL +#define PL2_DDR DDRL +#define PL2_PWM NULL +#undef PL3 +#define PL3_PIN PINL3 +#define PL3_RPORT PINL +#define PL3_WPORT PORTL +#define PL3_DDR DDRL +#define PL3_PWM &OCR5AL +#undef PL4 +#define PL4_PIN PINL4 +#define PL4_RPORT PINL +#define PL4_WPORT PORTL +#define PL4_DDR DDRL +#define PL4_PWM &OCR5BL +#undef PL5 +#define PL5_PIN PINL5 +#define PL5_RPORT PINL +#define PL5_WPORT PORTL +#define PL5_DDR DDRL +#define PL5_PWM &OCR5CL +#undef PL6 +#define PL6_PIN PINL6 +#define PL6_RPORT PINL +#define PL6_WPORT PORTL +#define PL6_DDR DDRL +#define PL6_PWM NULL +#undef PL7 +#define PL7_PIN PINL7 +#define PL7_RPORT PINL +#define PL7_WPORT PORTL +#define PL7_DDR DDRL +#define PL7_PWM NULL + +#endif + +#if defined (__AVR_AT90USB1287__) +// SPI +#define SCK DIO9 +#define MISO DIO11 +#define MOSI DIO10 +#define SS DIO8 + +// change for your board +#define DEBUG_LED DIO31 /* led D5 red */ + +/* +pins +*/ +#define DIO0_PIN PINA0 +#define DIO0_RPORT PINA +#define DIO0_WPORT PORTA +#define DIO0_PWM NULL +#define DIO0_DDR DDRA + +#define DIO1_PIN PINA1 +#define DIO1_RPORT PINA +#define DIO1_WPORT PORTA +#define DIO1_PWM NULL +#define DIO1_DDR DDRA + +#define DIO2_PIN PINA2 +#define DIO2_RPORT PINA +#define DIO2_WPORT PORTA +#define DIO2_PWM NULL +#define DIO2_DDR DDRA + +#define DIO3_PIN PINA3 +#define DIO3_RPORT PINA +#define DIO3_WPORT PORTA +#define DIO3_PWM NULL +#define DIO3_DDR DDRA + +#define DIO4_PIN PINA4 +#define DIO4_RPORT PINA +#define DIO4_WPORT PORTA +#define DIO4_PWM NULL +#define DIO4_DDR DDRA + +#define DIO5_PIN PINA5 +#define DIO5_RPORT PINA +#define DIO5_WPORT PORTA +#define DIO5_PWM NULL +#define DIO5_DDR DDRA + +#define DIO6_PIN PINA6 +#define DIO6_RPORT PINA +#define DIO6_WPORT PORTA +#define DIO6_PWM NULL +#define DIO6_DDR DDRA + +#define DIO7_PIN PINA7 +#define DIO7_RPORT PINA +#define DIO7_WPORT PORTA +#define DIO7_PWM NULL +#define DIO7_DDR DDRA + +#define DIO8_PIN PINB0 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_PWM NULL +#define DIO8_DDR DDRB + +#define DIO9_PIN PINB1 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_PWM NULL +#define DIO9_DDR DDRB + +#define DIO10_PIN PINB2 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_PWM NULL +#define DIO10_DDR DDRB + +#define DIO11_PIN PINB3 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_PWM NULL +#define DIO11_DDR DDRB + +#define DIO12_PIN PINB4 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_PWM NULL +#define DIO12_DDR DDRB + +#define DIO13_PIN PINB5 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_PWM NULL +#define DIO13_DDR DDRB + +#define DIO14_PIN PINB6 +#define DIO14_RPORT PINB +#define DIO14_WPORT PORTB +#define DIO14_PWM NULL +#define DIO14_DDR DDRB + +#define DIO15_PIN PINB7 +#define DIO15_RPORT PINB +#define DIO15_WPORT PORTB +#define DIO15_PWM NULL +#define DIO15_DDR DDRB + +#define DIO16_PIN PINC0 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_PWM NULL +#define DIO16_DDR DDRC + +#define DIO17_PIN PINC1 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_PWM NULL +#define DIO17_DDR DDRC + +#define DIO18_PIN PINC2 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_PWM NULL +#define DIO18_DDR DDRC + +#define DIO19_PIN PINC3 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_PWM NULL +#define DIO19_DDR DDRC + +#define DIO20_PIN PINC4 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_PWM NULL +#define DIO20_DDR DDRC + +#define DIO21_PIN PINC5 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_PWM NULL +#define DIO21_DDR DDRC + +#define DIO22_PIN PINC6 +#define DIO22_RPORT PINC +#define DIO22_WPORT PORTC +#define DIO22_PWM NULL +#define DIO22_DDR DDRC + +#define DIO23_PIN PINC7 +#define DIO23_RPORT PINC +#define DIO23_WPORT PORTC +#define DIO23_PWM NULL +#define DIO23_DDR DDRC + +#define DIO24_PIN PIND0 +#define DIO24_RPORT PIND +#define DIO24_WPORT PORTD +#define DIO24_PWM NULL +#define DIO24_DDR DDRD + +#define DIO25_PIN PIND1 +#define DIO25_RPORT PIND +#define DIO25_WPORT PORTD +#define DIO25_PWM NULL +#define DIO25_DDR DDRD + +#define DIO26_PIN PIND2 +#define DIO26_RPORT PIND +#define DIO26_WPORT PORTD +#define DIO26_PWM NULL +#define DIO26_DDR DDRD + +#define DIO27_PIN PIND3 +#define DIO27_RPORT PIND +#define DIO27_WPORT PORTD +#define DIO27_PWM NULL +#define DIO27_DDR DDRD + +#define DIO28_PIN PIND4 +#define DIO28_RPORT PIND +#define DIO28_WPORT PORTD +#define DIO28_PWM NULL +#define DIO28_DDR DDRD + +#define DIO29_PIN PIND5 +#define DIO29_RPORT PIND +#define DIO29_WPORT PORTD +#define DIO29_PWM NULL +#define DIO29_DDR DDRD + +#define DIO30_PIN PIND6 +#define DIO30_RPORT PIND +#define DIO30_WPORT PORTD +#define DIO30_PWM NULL +#define DIO30_DDR DDRD + +#define DIO31_PIN PIND7 +#define DIO31_RPORT PIND +#define DIO31_WPORT PORTD +#define DIO31_PWM NULL +#define DIO31_DDR DDRD + + +#define DIO32_PIN PINE0 +#define DIO32_RPORT PINE +#define DIO32_WPORT PORTE +#define DIO32_PWM NULL +#define DIO32_DDR DDRE + +#define DIO33_PIN PINE1 +#define DIO33_RPORT PINE +#define DIO33_WPORT PORTE +#define DIO33_PWM NULL +#define DIO33_DDR DDRE + +#define DIO34_PIN PINE2 +#define DIO34_RPORT PINE +#define DIO34_WPORT PORTE +#define DIO34_PWM NULL +#define DIO34_DDR DDRE + +#define DIO35_PIN PINE3 +#define DIO35_RPORT PINE +#define DIO35_WPORT PORTE +#define DIO35_PWM NULL +#define DIO35_DDR DDRE + +#define DIO36_PIN PINE4 +#define DIO36_RPORT PINE +#define DIO36_WPORT PORTE +#define DIO36_PWM NULL +#define DIO36_DDR DDRE + +#define DIO37_PIN PINE5 +#define DIO37_RPORT PINE +#define DIO37_WPORT PORTE +#define DIO37_PWM NULL +#define DIO37_DDR DDRE + +#define DIO38_PIN PINE6 +#define DIO38_RPORT PINE +#define DIO38_WPORT PORTE +#define DIO38_PWM NULL +#define DIO38_DDR DDRE + +#define DIO39_PIN PINE7 +#define DIO39_RPORT PINE +#define DIO39_WPORT PORTE +#define DIO39_PWM NULL +#define DIO39_DDR DDRE + +#define AIO0_PIN PINF0 +#define AIO0_RPORT PINF +#define AIO0_WPORT PORTF +#define AIO0_PWM NULL +#define AIO0_DDR DDRF + +#define AIO1_PIN PINF1 +#define AIO1_RPORT PINF +#define AIO1_WPORT PORTF +#define AIO1_PWM NULL +#define AIO1_DDR DDRF + +#define AIO2_PIN PINF2 +#define AIO2_RPORT PINF +#define AIO2_WPORT PORTF +#define AIO2_PWM NULL +#define AIO2_DDR DDRF + +#define AIO3_PIN PINF3 +#define AIO3_RPORT PINF +#define AIO3_WPORT PORTF +#define AIO3_PWM NULL +#define AIO3_DDR DDRF + +#define AIO4_PIN PINF4 +#define AIO4_RPORT PINF +#define AIO4_WPORT PORTF +#define AIO4_PWM NULL +#define AIO4_DDR DDRF + +#define AIO5_PIN PINF5 +#define AIO5_RPORT PINF +#define AIO5_WPORT PORTF +#define AIO5_PWM NULL +#define AIO5_DDR DDRF + +#define AIO6_PIN PINF6 +#define AIO6_RPORT PINF +#define AIO6_WPORT PORTF +#define AIO6_PWM NULL +#define AIO6_DDR DDRF + +#define AIO7_PIN PINF7 +#define AIO7_RPORT PINF +#define AIO7_WPORT PORTF +#define AIO7_PWM NULL +#define AIO7_DDR DDRF + +#define DIO40_PIN PINF0 +#define DIO40_RPORT PINF +#define DIO40_WPORT PORTF +#define DIO40_PWM NULL +#define DIO40_DDR DDRF + +#define DIO41_PIN PINF1 +#define DIO41_RPORT PINF +#define DIO41_WPORT PORTF +#define DIO41_PWM NULL +#define DIO41_DDR DDRF + +#define DIO42_PIN PINF2 +#define DIO42_RPORT PINF +#define DIO42_WPORT PORTF +#define DIO42_PWM NULL +#define DIO42_DDR DDRF + +#define DIO43_PIN PINF3 +#define DIO43_RPORT PINF +#define DIO43_WPORT PORTF +#define DIO43_PWM NULL +#define DIO43_DDR DDRF + +#define DIO44_PIN PINF4 +#define DIO44_RPORT PINF +#define DIO44_WPORT PORTF +#define DIO44_PWM NULL +#define DIO44_DDR DDRF + +#define DIO45_PIN PINF5 +#define DIO45_RPORT PINF +#define DIO45_WPORT PORTF +#define DIO45_PWM NULL +#define DIO45_DDR DDRF + +#define DIO46_PIN PINF6 +#define DIO46_RPORT PINF +#define DIO46_WPORT PORTF +#define DIO46_PWM NULL +#define DIO46_DDR DDRF + +#define DIO47_PIN PINF7 +#define DIO47_RPORT PINF +#define DIO47_WPORT PORTF +#define DIO47_PWM NULL +#define DIO47_DDR DDRF + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_PWM NULL +#define PA0_DDR DDRA +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_PWM NULL +#define PA1_DDR DDRA +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_PWM NULL +#define PA2_DDR DDRA +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_PWM NULL +#define PA3_DDR DDRA +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_PWM NULL +#define PA4_DDR DDRA +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_PWM NULL +#define PA5_DDR DDRA +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_PWM NULL +#define PA6_DDR DDRA +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_PWM NULL +#define PA7_DDR DDRA + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_PWM NULL +#define PB0_DDR DDRB +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_PWM NULL +#define PB1_DDR DDRB +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_PWM NULL +#define PB2_DDR DDRB +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_PWM NULL +#define PB3_DDR DDRB +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_PWM NULL +#define PB4_DDR DDRB +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_PWM NULL +#define PB5_DDR DDRB +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_PWM NULL +#define PB6_DDR DDRB +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_PWM NULL +#define PB7_DDR DDRB + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_PWM NULL +#define PC0_DDR DDRC +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_PWM NULL +#define PC1_DDR DDRC +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_PWM NULL +#define PC2_DDR DDRC +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_PWM NULL +#define PC3_DDR DDRC +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_PWM NULL +#define PC4_DDR DDRC +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_PWM NULL +#define PC5_DDR DDRC +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_PWM NULL +#define PC6_DDR DDRC +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_PWM NULL +#define PC7_DDR DDRC + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_PWM NULL +#define PD0_DDR DDRD +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_PWM NULL +#define PD1_DDR DDRD +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_PWM NULL +#define PD2_DDR DDRD +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_PWM NULL +#define PD3_DDR DDRD +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_PWM NULL +#define PD4_DDR DDRD +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_PWM NULL +#define PD5_DDR DDRD +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_PWM NULL +#define PD6_DDR DDRD +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_PWM NULL +#define PD7_DDR DDRD + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_PWM NULL +#define PE0_DDR DDRE +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_PWM NULL +#define PE1_DDR DDRE +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_PWM NULL +#define PE2_DDR DDRE +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_PWM NULL +#define PE3_DDR DDRE +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_PWM NULL +#define PE4_DDR DDRE +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_PWM NULL +#define PE5_DDR DDRE +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_PWM NULL +#define PE6_DDR DDRE +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_PWM NULL +#define PE7_DDR DDRE + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_PWM NULL +#define PF0_DDR DDRF +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_PWM NULL +#define PF1_DDR DDRF +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_PWM NULL +#define PF2_DDR DDRF +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_PWM NULL +#define PF3_DDR DDRF +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_PWM NULL +#define PF4_DDR DDRF +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_PWM NULL +#define PF5_DDR DDRF +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_PWM NULL +#define PF6_DDR DDRF +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_PWM NULL +#define PF7_DDR DDRF +#endif + +#ifndef DIO0_PIN +#error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request +#endif + #endif /* _ARDUINO_H */ diff --git a/Marlin/pins.h b/Marlin/pins.h index 2c2bc9144..4ec22793e 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -1,738 +1,737 @@ -#ifndef PINS_H -#define PINS_H - -/**************************************************************************************** -* Arduino pin assignment -* -* ATMega168 -* +-\/-+ -* PC6 1| |28 PC5 (AI 5 / D19) -* (D 0) PD0 2| |27 PC4 (AI 4 / D18) -* (D 1) PD1 3| |26 PC3 (AI 3 / D17) -* (D 2) PD2 4| |25 PC2 (AI 2 / D16) -* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15) -* (D 4) PD4 6| |23 PC0 (AI 0 / D14) -* VCC 7| |22 GND -* GND 8| |21 AREF -* PB6 9| |20 AVCC -* PB7 10| |19 PB5 (D 13) -* PWM+ (D 5) PD5 11| |18 PB4 (D 12) -* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -* (D 7) PD7 13| |16 PB2 (D 10) PWM -* (D 8) PB0 14| |15 PB1 (D 9) PWM -* +----+ -****************************************************************************************/ -#if MOTHERBOARD == 0 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega168__ -#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu. -#endif - -#define X_STEP_PIN 2 -#define X_DIR_PIN 3 -#define X_ENABLE_PIN -1 -#define X_MIN_PIN 4 -#define X_MAX_PIN 9 - -#define Y_STEP_PIN 10 -#define Y_DIR_PIN 7 -#define Y_ENABLE_PIN -1 -#define Y_MIN_PIN 8 -#define Y_MAX_PIN 13 - -#define Z_STEP_PIN 19 -#define Z_DIR_PIN 18 -#define Z_ENABLE_PIN 5 -#define Z_MIN_PIN 17 -#define Z_MAX_PIN 16 - -#define E0_STEP_PIN 11 -#define E0_DIR_PIN 12 -#define E0_ENABLE_PIN -1 - -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN -1 -#define FAN_PIN -1 -#define PS_ON_PIN 15 -#define KILL_PIN -1 - -#define HEATER_0_PIN 6 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 -#endif - - - -/**************************************************************************************** -* Sanguino/RepRap Motherboard with direct-drive extruders -* -* ATMega644P -* -* +---\/---+ -* (D 0) PB0 1| |40 PA0 (AI 0 / D31) -* (D 1) PB1 2| |39 PA1 (AI 1 / D30) -* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) -* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) -* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) -* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) -* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) -* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) -* RST 9| |32 AREF -* VCC 10| |31 GND -* GND 11| |30 AVCC -* XTAL2 12| |29 PC7 (D 23) -* XTAL1 13| |28 PC6 (D 22) -* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI -* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO -* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS -* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK -* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA -* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL -* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM -* +--------+ -* -****************************************************************************************/ -#if MOTHERBOARD == 1 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega644P__ -#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 -#define X_MIN_PIN 20 -#define X_MAX_PIN 21 - -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 19 -#define Y_MIN_PIN 25 -#define Y_MAX_PIN 26 - -#define Z_STEP_PIN 29 -#define Z_DIR_PIN 30 -#define Z_ENABLE_PIN 31 -#define Z_MIN_PIN 2 -#define Z_MAX_PIN 1 - -#define E0_STEP_PIN 12 -#define E0_DIR_PIN 16 -#define E0_ENABLE_PIN 3 - -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN 0 -#define FAN_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 14 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 -/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ - - - -#endif - - -/**************************************************************************************** -* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---******* -* -****************************************************************************************/ -#if MOTHERBOARD == 2 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega644P__ -#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 -#define X_MIN_PIN 20 -#define X_MAX_PIN 21 - -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 -#define Y_MIN_PIN 25 -#define Y_MAX_PIN 26 - -#define Z_STEP_PINN 27 -#define Z_DIR_PINN 28 -#define Z_ENABLE_PIN 29 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 31 - -#define E0_STEP_PIN 17 -#define E0_DIR_PIN 16 -#define E0_ENABLE_PIN -1 - -#define SDPOWER -1 -#define SDSS 4 -#define LED_PIN 0 - -#define SD_CARD_WRITE 2 -#define SD_CARD_DETECT 3 -#define SD_CARD_SELECT 4 - -//our RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 - -//pin for controlling the PSU. -#define PS_ON_PIN 14 - -#define FAN_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN -1 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 - -#endif - -/**************************************************************************************** -* Arduino Mega pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 33 -#define MOTHERBOARD 3 -#define RAMPS_V_1_3 -#endif -#if MOTHERBOARD == 3 -#define KNOWN_BOARD 1 - -//////////////////FIX THIS////////////// -#ifndef __AVR_ATmega1280__ - #ifndef __AVR_ATmega2560__ - #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. - #endif -#endif - -// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 -// #define RAMPS_V_1_3 -// #define RAMPS_V_1_0 - -#ifdef RAMPS_V_1_3 - -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 -#define X_MIN_PIN 3 -#define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable. - -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 //15 - -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 //19 - -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 - -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 - -#define SDPOWER -1 -#define SDSS 53 -#define LED_PIN 13 -#define FAN_PIN 4 -#define PS_ON_PIN 12 -#define KILL_PIN -1 - -#define HEATER_0_PIN 10 // EXTRUDER 1 -#define HEATER_1_PIN 9 // EXTRUDER 2 -#define HEATER_2_PIN -1 // EXTRUDER 2 -#define TEMP_0_PIN 13 // ANALOG NUMBERING -#define TEMP_1_PIN 15 // ANALOG NUMBERING -#define TEMP_2_PIN -1 // ANALOG NUMBERING -#define HEATER_BED_PIN 8 // BED -#define TEMP_BED_PIN 14 // ANALOG NUMBERING - - -#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default - -#define X_STEP_PIN 26 -#define X_DIR_PIN 28 -#define X_ENABLE_PIN 24 -#define X_MIN_PIN 3 -#define X_MAX_PIN -1 //2 - -#define Y_STEP_PIN 38 -#define Y_DIR_PIN 40 -#define Y_ENABLE_PIN 36 -#define Y_MIN_PIN 16 -#define Y_MAX_PIN -1 //17 - -#define Z_STEP_PIN 44 -#define Z_DIR_PIN 46 -#define Z_ENABLE_PIN 42 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN -1 //19 - -#define E0_STEP_PIN 32 -#define E0_DIR_PIN 34 -#define E0_ENABLE_PIN 30 - -#define SDPOWER 48 -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - - - -#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 - #define HEATER_0_PIN 12 // RAMPS 1.0 - #define HEATER_BED_PIN -1 // RAMPS 1.0 - #define FAN_PIN 11 // RAMPS 1.0 -#else // RAMPS_V_1_1 or RAMPS_V_1_2 - #define HEATER_0_PIN 10 // RAMPS 1.1 - #define HEATER_BED_PIN 8 // RAMPS 1.1 - #define FAN_PIN 9 // RAMPS 1.1 -#endif -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#endif - -// SPI for Max6675 Thermocouple - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support #define SCK_PIN 52 - #define MISO_PIN 50 - #define MOSI_PIN 51 - #define MAX6675_SS 53 -#else - #define MAX6675_SS 49 -#endif - - -#endif -/**************************************************************************************** -* Duemilanove w/ ATMega328P pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 4 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega328P__ -#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 19 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN -1 -#define X_MIN_PIN 17 -#define X_MAX_PIN -1 - -#define Y_STEP_PIN 10 -#define Y_DIR_PIN 7 -#define Y_ENABLE_PIN -1 -#define Y_MIN_PIN 8 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 13 -#define Z_DIR_PIN 3 -#define Z_ENABLE_PIN 2 -#define Z_MIN_PIN 4 -#define Z_MAX_PIN -1 - -#define E0_STEP_PIN 11 -#define E0_DIR_PIN 12 -#define E0_ENABLE_PIN -1 - -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN -1 -#define FAN_PIN 5 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 6 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 - -#endif - -/**************************************************************************************** -* Gen6 pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 5 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega644P__ - #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -//x axis pins - #define X_STEP_PIN 15 - #define X_DIR_PIN 18 - #define X_ENABLE_PIN 19 - #define X_MIN_PIN 20 - #define X_MAX_PIN -1 - - //y axis pins - #define Y_STEP_PIN 23 - #define Y_DIR_PIN 22 - #define Y_ENABLE_PIN 24 - #define Y_MIN_PIN 25 - #define Y_MAX_PIN -1 - - //z axis pins - #define Z_STEP_PIN 27 - #define Z_DIR_PIN 28 - #define Z_ENABLE_PIN 29 - #define Z_MIN_PIN 30 - #define Z_MAX_PIN -1 - - //extruder pins - #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715 - #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 - #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 - #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 - #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 - #define TEMP_2_PIN -1 //changed @ rkoeppl 20110410 - #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 - #define HEATER_1_PIN -1 - #define HEATER_2_PIN -1 - #define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410 - #define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410 - - #define SDPOWER -1 - #define SDSS 17 - #define LED_PIN -1 //changed @ rkoeppl 20110410 - #define FAN_PIN -1 //changed @ rkoeppl 20110410 - #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 - //our pin for debugging. - - #define DEBUG_PIN 0 - - //our RS485 pins - #define TX_ENABLE_PIN 12 - #define RX_ENABLE_PIN 13 - - -#endif - -/**************************************************************************************** -* Sanguinololu pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 62 -#define MOTHERBOARD 6 -#define SANGUINOLOLU_V_1_2 -#endif -#if MOTHERBOARD == 6 -#define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ -#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 21 -#define X_MIN_PIN 18 -#define X_MAX_PIN -2 - -#define Y_STEP_PIN 22 -#define Y_DIR_PIN 23 -#define Y_MIN_PIN 19 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 3 -#define Z_DIR_PIN 2 -#define Z_MIN_PIN 20 -#define Z_MAX_PIN -1 - -#define E0_STEP_PIN 1 -#define E0_DIR_PIN 0 - -#define LED_PIN -1 - -#define FAN_PIN -1 - -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 13 // (extruder) -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 - -#ifdef SANGUINOLOLU_V_1_2 - -#define HEATER_BED_PIN 12 // (bed) -#define X_ENABLE_PIN 14 -#define Y_ENABLE_PIN 14 -#define Z_ENABLE_PIN 26 -#define E0_ENABLE_PIN 14 - -#else - -#define HEATER_BED_PIN 14 // (bed) -#define X_ENABLE_PIN -1 -#define Y_ENABLE_PIN -1 -#define Z_ENABLE_PIN -1 -#define E0_ENABLE_PIN -1 - -#endif - -#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) -#define SDPOWER -1 -#define SDSS 31 - -#endif - - -#if MOTHERBOARD == 7 -#define KNOWN_BOARD -/***************************************************************** -* Ultimaker pin assignment -******************************************************************/ - -#ifndef __AVR_ATmega1280__ - #ifndef __AVR_ATmega2560__ - #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. - #endif -#endif - -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_MIN_PIN 22 -#define X_MAX_PIN 24 -#define X_ENABLE_PIN 27 - -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_MIN_PIN 26 -#define Y_MAX_PIN 28 -#define Y_ENABLE_PIN 29 - -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 32 -#define Z_ENABLE_PIN 35 - -#define HEATER_BED_PIN 4 -#define TEMP_BED_PIN 11 - -#define EXTRUDER_0_STEP_PIN 43 -#define EXTRUDER_0_DIR_PIN 45 -#define EXTRUDER_0_ENABLE_PIN 41 -#define HEATER_0_PIN 2 -#define TEMP_0_PIN 8 - -#define EXTRUDER_1_STEP_PIN 49 -#define EXTRUDER_1_DIR_PIN 47 -#define EXTRUDER_1_ENABLE_PIN 51 -#define EXTRUDER_1_HEATER_PIN 3 -#define EXTRUDER_1_TEMPERATURE_PIN 10 -#define HEATER_1_PIN 51 -#define TEMP_1_PIN 3 - - - -#define E0_STEP_PIN EXTRUDER_0_STEP_PIN -#define E0_DIR_PIN EXTRUDER_0_DIR_PIN -#define E0_ENABLE_PIN EXTRUDER_0_ENABLE_PIN - -#define SDPOWER -1 -#define SDSS 53 -#define LED_PIN 13 -#define FAN_PIN 7 -#define PS_ON_PIN 12 -#define KILL_PIN -1 - -#ifdef ULTRA_LCD - - #ifdef NEWPANEL - //arduino pin witch triggers an piezzo beeper - #define BEEPER 18 - - #define LCD_PINS_RS 20 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 - - //buttons are directly attached - #define BTN_EN1 40 - #define BTN_EN2 42 - #define BTN_ENC 19 //the click - - #define BLEN_C 2 - #define BLEN_B 1 - #define BLEN_A 0 - - #define SDCARDDETECT 38 - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - #else //old style panel with shift register - //arduino pin witch triggers an piezzo beeper - #define BEEPER 18 - - //buttons are attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 - - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - - - //bits in the shift register that carry the buttons for: - // left up center down right red - #define BL_LE 7 - #define BL_UP 6 - #define BL_MI 5 - #define BL_DW 4 - #define BL_RI 3 - #define BL_ST 2 - - #define BLEN_B 1 - #define BLEN_A 0 - #endif -#endif //ULTRA_LCD - -#endif - -/**************************************************************************************** -* Teensylu 0.7 pin assingments (ATMEGA90USB) -* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! -****************************************************************************************/ -#if MOTHERBOARD == 8 -#define MOTHERBOARD 8 -#define KNOWN_BOARD 1 - - -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 -#define X_MAX_PIN -1 - -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 -#define Z_MAX_PIN -1 - -#define E0_STEP_PIN 6 -#define E0_DIR_PIN 7 -#define E0_ENABLE_PIN 19 - - - -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define HEATER_BED_PIN 20 // Bed -#define FAN_PIN 22 // Fan - -#define TEMP_0_PIN 7 // Extruder -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define TEMP_BED_PIN 6 // Bed - -#define SDPOWER -1 -#define SDSS 8 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define ALARM_PIN -1 - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support - #define SCK_PIN 9 - #define MISO_PIN 11 - #define MOSI_PIN 10 -#endif -#endif - -#ifndef KNOWN_BOARD -#error Unknown MOTHERBOARD value in configuration.h -#endif - -//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! -#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN -#if EXTRUDERS == 3 - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN - #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN -#elif EXTRUDERS == 2 - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN - #define _E2_PINS -1 -#elif EXTRUDERS == 1 - #define _E1_PINS -1 - #define _E2_PINS -1 -#else - #error Unsupported number of extruders -#endif -#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \ - HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, \ - HEATER_BED_PIN, FAN_PIN, \ - _E0_PINS, _E1_PINS, _E2_PINS, \ - TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN } +#ifndef PINS_H +#define PINS_H + +/**************************************************************************************** +* Arduino pin assignment +* +* ATMega168 +* +-\/-+ +* PC6 1| |28 PC5 (AI 5 / D19) +* (D 0) PD0 2| |27 PC4 (AI 4 / D18) +* (D 1) PD1 3| |26 PC3 (AI 3 / D17) +* (D 2) PD2 4| |25 PC2 (AI 2 / D16) +* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15) +* (D 4) PD4 6| |23 PC0 (AI 0 / D14) +* VCC 7| |22 GND +* GND 8| |21 AREF +* PB6 9| |20 AVCC +* PB7 10| |19 PB5 (D 13) +* PWM+ (D 5) PD5 11| |18 PB4 (D 12) +* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM +* (D 7) PD7 13| |16 PB2 (D 10) PWM +* (D 8) PB0 14| |15 PB1 (D 9) PWM +* +----+ +****************************************************************************************/ +#if MOTHERBOARD == 0 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega168__ +#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu. +#endif + +#define X_STEP_PIN 2 +#define X_DIR_PIN 3 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 4 +#define X_MAX_PIN 9 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN 13 + +#define Z_STEP_PIN 19 +#define Z_DIR_PIN 18 +#define Z_ENABLE_PIN 5 +#define Z_MIN_PIN 17 +#define Z_MAX_PIN 16 + +#define E0_STEP_PIN 11 +#define E0_DIR_PIN 12 +#define E0_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN 15 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 +#endif + + + +/**************************************************************************************** +* Sanguino/RepRap Motherboard with direct-drive extruders +* +* ATMega644P +* +* +---\/---+ +* (D 0) PB0 1| |40 PA0 (AI 0 / D31) +* (D 1) PB1 2| |39 PA1 (AI 1 / D30) +* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +* RST 9| |32 AREF +* VCC 10| |31 GND +* GND 11| |30 AVCC +* XTAL2 12| |29 PC7 (D 23) +* XTAL1 13| |28 PC6 (D 22) +* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +* +--------+ +* +****************************************************************************************/ +#if MOTHERBOARD == 1 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN 21 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 19 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN 26 + +#define Z_STEP_PIN 29 +#define Z_DIR_PIN 30 +#define Z_ENABLE_PIN 31 +#define Z_MIN_PIN 2 +#define Z_MAX_PIN 1 + +#define E0_STEP_PIN 12 +#define E0_DIR_PIN 16 +#define E0_ENABLE_PIN 3 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN 0 +#define FAN_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 14 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ + + + +#endif + + +/**************************************************************************************** +* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---******* +* +****************************************************************************************/ +#if MOTHERBOARD == 2 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN 21 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN 26 + +#define Z_STEP_PINN 27 +#define Z_DIR_PINN 28 +#define Z_ENABLE_PIN 29 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 31 + +#define E0_STEP_PIN 17 +#define E0_DIR_PIN 16 +#define E0_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS 4 +#define LED_PIN 0 + +#define SD_CARD_WRITE 2 +#define SD_CARD_DETECT 3 +#define SD_CARD_SELECT 4 + +//our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +//pin for controlling the PSU. +#define PS_ON_PIN 14 + +#define FAN_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN -1 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 + +#endif + +/**************************************************************************************** +* Arduino Mega pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 33 +#define MOTHERBOARD 3 +#define RAMPS_V_1_3 +#endif +#if MOTHERBOARD == 3 +#define KNOWN_BOARD 1 + +//////////////////FIX THIS////////////// +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 +// #define RAMPS_V_1_3 +// #define RAMPS_V_1_0 + +#ifdef RAMPS_V_1_3 + +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable. + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 //15 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 //19 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 4 +#define PS_ON_PIN 12 +#define KILL_PIN -1 + +#define HEATER_0_PIN 10 // EXTRUDER 1 +#define HEATER_1_PIN 9 // EXTRUDER 2 +#define HEATER_2_PIN -1 // EXTRUDER 2 +#define TEMP_0_PIN 13 // ANALOG NUMBERING +#define TEMP_1_PIN 15 // ANALOG NUMBERING +#define TEMP_2_PIN -1 // ANALOG NUMBERING +#define HEATER_BED_PIN 8 // BED +#define TEMP_BED_PIN 14 // ANALOG NUMBERING + + +#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default + +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 3 +#define X_MAX_PIN -1 //2 + +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN -1 //17 + +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN -1 //19 + +#define E0_STEP_PIN 32 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#define SDPOWER 48 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + + + +#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 + #define HEATER_0_PIN 12 // RAMPS 1.0 + #define HEATER_BED_PIN -1 // RAMPS 1.0 + #define FAN_PIN 11 // RAMPS 1.0 +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 // RAMPS 1.1 + #define HEATER_BED_PIN 8 // RAMPS 1.1 + #define FAN_PIN 9 // RAMPS 1.1 +#endif +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#endif + +// SPI for Max6675 Thermocouple + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support #define SCK_PIN 52 + #define MISO_PIN 50 + #define MOSI_PIN 51 + #define MAX6675_SS 53 +#else + #define MAX6675_SS 49 +#endif + + +#endif +/**************************************************************************************** +* Duemilanove w/ ATMega328P pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 4 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega328P__ +#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 17 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 2 +#define Z_MIN_PIN 4 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 11 +#define E0_DIR_PIN 12 +#define E0_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN 5 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 + +#endif + +/**************************************************************************************** +* Gen6 pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 5 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ + #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +//x axis pins + #define X_STEP_PIN 15 + #define X_DIR_PIN 18 + #define X_ENABLE_PIN 19 + #define X_MIN_PIN 20 + #define X_MAX_PIN -1 + + //y axis pins + #define Y_STEP_PIN 23 + #define Y_DIR_PIN 22 + #define Y_ENABLE_PIN 24 + #define Y_MIN_PIN 25 + #define Y_MAX_PIN -1 + + //z axis pins + #define Z_STEP_PIN 27 + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 29 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN -1 + + //extruder pins + #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715 + #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 + #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 + #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 + #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_2_PIN -1 //changed @ rkoeppl 20110410 + #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 + #define HEATER_1_PIN -1 + #define HEATER_2_PIN -1 + #define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410 + + #define SDPOWER -1 + #define SDSS 17 + #define LED_PIN -1 //changed @ rkoeppl 20110410 + #define FAN_PIN -1 //changed @ rkoeppl 20110410 + #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 + //our pin for debugging. + + #define DEBUG_PIN 0 + + //our RS485 pins + #define TX_ENABLE_PIN 12 + #define RX_ENABLE_PIN 13 + + +#endif + +/**************************************************************************************** +* Sanguinololu pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 62 +#define MOTHERBOARD 6 +#define SANGUINOLOLU_V_1_2 +#endif +#if MOTHERBOARD == 6 +#define KNOWN_BOARD 1 +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 +#define X_MIN_PIN 18 +#define X_MAX_PIN -2 + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_MIN_PIN 19 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 +#define Z_MIN_PIN 20 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 + +#define LED_PIN -1 + +#define FAN_PIN -1 + +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 13 // (extruder) +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + +#ifdef SANGUINOLOLU_V_1_2 + +#define HEATER_BED_PIN 12 // (bed) +#define X_ENABLE_PIN 14 +#define Y_ENABLE_PIN 14 +#define Z_ENABLE_PIN 26 +#define E0_ENABLE_PIN 14 + +#else + +#define HEATER_BED_PIN 14 // (bed) +#define X_ENABLE_PIN -1 +#define Y_ENABLE_PIN -1 +#define Z_ENABLE_PIN -1 +#define E0_ENABLE_PIN -1 + +#endif + +#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) +#define SDPOWER -1 +#define SDSS 31 + +#endif + + +#if MOTHERBOARD == 7 +#define KNOWN_BOARD +/***************************************************************** +* Ultimaker pin assignment +******************************************************************/ + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 +#define Z_ENABLE_PIN 35 + +#define HEATER_BED_PIN 4 +#define TEMP_BED_PIN 11 + +#define HEATER_0_PIN 2 +#define TEMP_0_PIN 8 + +#define EXTRUDER_1_HEATER_PIN 3 +#define EXTRUDER_1_TEMPERATURE_PIN 10 +#define HEATER_1_PIN 51 +#define TEMP_1_PIN 3 + +#define HEATER_2_PIN -1 +#define TEMP_2_PIN -1 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 51 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 7 +#define PS_ON_PIN 12 +#define KILL_PIN -1 + +#ifdef ULTRA_LCD + + #ifdef NEWPANEL + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + //buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define SDCARDDETECT 38 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + #else //old style panel with shift register + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + //buttons are attached to a shift register + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + + + //bits in the shift register that carry the buttons for: + // left up center down right red + #define BL_LE 7 + #define BL_UP 6 + #define BL_MI 5 + #define BL_DW 4 + #define BL_RI 3 + #define BL_ST 2 + + #define BLEN_B 1 + #define BLEN_A 0 + #endif +#endif //ULTRA_LCD + +#endif + +/**************************************************************************************** +* Teensylu 0.7 pin assingments (ATMEGA90USB) +* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! +****************************************************************************************/ +#if MOTHERBOARD == 8 +#define MOTHERBOARD 8 +#define KNOWN_BOARD 1 + + +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 39 +#define X_MIN_PIN 13 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 38 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 23 +#define Z_MIN_PIN 15 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 6 +#define E0_DIR_PIN 7 +#define E0_ENABLE_PIN 19 + + + +#define HEATER_0_PIN 21 // Extruder +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 20 // Bed +#define FAN_PIN 22 // Fan + +#define TEMP_0_PIN 7 // Extruder +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 6 // Bed + +#define SDPOWER -1 +#define SDSS 8 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define ALARM_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 +#endif +#endif + +#ifndef KNOWN_BOARD +#error Unknown MOTHERBOARD value in configuration.h +#endif + +//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! +#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN +#if EXTRUDERS == 3 + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN +#elif EXTRUDERS == 2 + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN + #define _E2_PINS -1 +#elif EXTRUDERS == 1 + #define _E1_PINS -1 + #define _E2_PINS -1 +#else + #error Unsupported number of extruders +#endif +#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \ + HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, \ + HEATER_BED_PIN, FAN_PIN, \ + _E0_PINS, _E1_PINS, _E2_PINS, \ + TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN } #endif diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index d2179301f..afe2f3e83 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -191,8 +191,8 @@ void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exi } #ifdef ADVANCE - long initial_advance = block->advance*entry_factor*entry_factor; - long final_advance = block->advance*exit_factor*exit_factor; + volatile long initial_advance = block->advance*entry_factor*entry_factor; + volatile long final_advance = block->advance*exit_factor*exit_factor; #endif // ADVANCE // block->accelerate_until = accelerate_steps; diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 465ab89dd..586ea7c95 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -57,7 +57,7 @@ volatile static unsigned long step_events_completed; // The number of step event static long advance_rate, advance, final_advance = 0; static long old_advance = 0; #endif -static long e_steps; +static long e_steps[3]; static unsigned char busy = false; // TRUE when SIG_OUTPUT_COMPARE1A is being serviced. Used to avoid retriggering that handler. static long acceleration_time, deceleration_time; //static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; @@ -266,7 +266,7 @@ FORCE_INLINE void trapezoid_generator_reset() { advance = current_block->initial_advance; final_advance = current_block->final_advance; // Do E steps + advance steps - e_steps += ((advance >>8) - old_advance); + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); old_advance = advance >>8; #endif deceleration_time = 0; @@ -303,8 +303,8 @@ ISR(TIMER1_COMPA_vect) counter_z = counter_x; counter_e = counter_x; step_events_completed = 0; - // #ifdef ADVANCE - e_steps = 0; +// #ifdef ADVANCE +// e_steps[current_block->active_extruder] = 0; // #endif } else { @@ -418,11 +418,11 @@ ISR(TIMER1_COMPA_vect) #ifndef ADVANCE if ((out_bits & (1< 0) { counter_e -= current_block->step_event_count; if ((out_bits & (1<active_extruder]--; } else { - e_steps++; + e_steps[current_block->active_extruder]++; } } #endif //ADVANCE @@ -503,7 +503,7 @@ ISR(TIMER1_COMPA_vect) } //if(advance > current_block->advance) advance = current_block->advance; // Do E steps + advance steps - e_steps += ((advance >>8) - old_advance); + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); old_advance = advance >>8; #endif @@ -532,7 +532,7 @@ ISR(TIMER1_COMPA_vect) } if(advance < final_advance) advance = final_advance; // Do E steps + advance steps - e_steps += ((advance >>8) - old_advance); + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); old_advance = advance >>8; #endif //ADVANCE } @@ -557,20 +557,50 @@ ISR(TIMER1_COMPA_vect) old_OCR0A += 52; // ~10kHz interrupt (250000 / 26 = 9615kHz) OCR0A = old_OCR0A; // Set E direction (Depends on E direction + advance) - for(unsigned char i=0; i<4;) { - WRITE_E_STEP(LOW); - if (e_steps == 0) break; - i++; - if (e_steps < 0) { - WRITE_E_DIR(INVERT_E_DIR); - e_steps++; - WRITE_E_STEP(HIGH); - } - else if (e_steps > 0) { - WRITE_E_DIR(!INVERT_E_DIR); - e_steps--; - WRITE_E_STEP(HIGH); + for(unsigned char i=0; i<4;i++) { + if (e_steps[0] != 0) { + WRITE(E0_STEP_PIN, LOW); + if (e_steps[0] < 0) { + WRITE(E0_DIR_PIN, INVERT_E0_DIR); + e_steps[0]++; + WRITE(E0_STEP_PIN, HIGH); + } + else if (e_steps[0] > 0) { + WRITE(E0_DIR_PIN, !INVERT_E0_DIR); + e_steps[0]--; + WRITE(E0_STEP_PIN, HIGH); + } } + #if EXTRUDERS > 1 + if (e_steps[1] != 0) { + WRITE(E1_STEP_PIN, LOW); + if (e_steps[1] < 0) { + WRITE(E1_DIR_PIN, INVERT_E1_DIR); + e_steps[1]++; + WRITE(E1_STEP_PIN, HIGH); + } + else if (e_steps[1] > 0) { + WRITE(E1_DIR_PIN, !INVERT_E1_DIR); + e_steps[1]--; + WRITE(E1_STEP_PIN, HIGH); + } + } + #endif + #if EXTRUDERS > 2 + if (e_steps[2] != 0) { + WRITE(E2_STEP_PIN, LOW); + if (e_steps[2] < 0) { + WRITE(E2_DIR_PIN, INVERT_E2_DIR); + e_steps[2]++; + WRITE(E2_STEP_PIN, HIGH); + } + else if (e_steps[2] > 0) { + WRITE(E2_DIR_PIN, !INVERT_E2_DIR); + e_steps[2]--; + WRITE(E2_STEP_PIN, HIGH); + } + } + #endif } } #endif // ADVANCE @@ -712,7 +742,9 @@ void st_init() TCCR0A &= ~(1< 2 + #define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}} + #define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(!E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(!E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}} + #define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}} +#elif EXTRUDERS > 1 + #define WRITE_E_STEP(v) { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }} + #define NORM_E_DIR() { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }} + #define REV_E_DIR() { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }} +#else + #define WRITE_E_STEP(v) WRITE(E0_STEP_PIN, v) + #define NORM_E_DIR() WRITE(E0_DIR_PIN, !INVERT_E0_DIR) + #define REV_E_DIR() WRITE(E0_DIR_PIN, INVERT_E0_DIR) +#endif + + // Initialize and start the stepper motor subsystem void st_init(); diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 72b895979..761e136a3 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -26,7 +26,6 @@ It has preliminary support for Matthew Roberts advance algorithm http://reprap.org/pipermail/reprap-dev/2011-May/003323.html - This firmware is optimized for gen6 electronics. */ #include @@ -82,6 +81,7 @@ static unsigned long previous_millis_bed_heater; // static float pid_output[EXTRUDERS]; static bool pid_reset[EXTRUDERS]; #endif //PIDTEMP + static unsigned char soft_pwm[EXTRUDERS]; #ifdef WATCHPERIOD static int watch_raw[EXTRUDERS] = { -1000 }; // the first value used for all @@ -140,6 +140,10 @@ void updatePID() #endif } +int getHeaterPower(int heater) { + return soft_pwm[heater]; +} + void manage_heater() { #ifdef USE_WATCHDOG @@ -198,15 +202,16 @@ void manage_heater() } #endif - // Check if temperature is within the correct range - if((current_raw[e] > minttemp[e]) && (current_raw[e] < maxttemp[e])) - { - analogWrite(heater_pin_map[e], pid_output); - } - else { - analogWrite(heater_pin_map[e], 0); - } - + // Check if temperature is within the correct range + if((current_raw[e] > minttemp[e]) && (current_raw[e] < maxttemp[e])) + { + //analogWrite(heater_pin_map[e], pid_output); + soft_pwm[e] = (int)pid_output >> 1; + } + else { + //analogWrite(heater_pin_map[e], 0); + soft_pwm[e] = 0; + } } // End extruder for loop if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) @@ -418,7 +423,6 @@ void tp_init() DIDR0 |= 1 << TEMP_0_PIN; #else DIDR2 |= 1<<(TEMP_0_PIN - 8); - ADCSRB = 1< -1) @@ -426,7 +430,6 @@ void tp_init() DIDR0 |= 1< -1) @@ -434,7 +437,6 @@ void tp_init() DIDR0 |= 1 << TEMP_2_PIN; #else DIDR2 = 1<<(TEMP_2_PIN - 8); - ADCSRB = 1< -1) @@ -442,7 +444,6 @@ void tp_init() DIDR0 |= 1< -1 target_raw[0]=0; + soft_pwm[0]=0; #if HEATER_0_PIN > -1 digitalWrite(HEATER_0_PIN,LOW); #endif @@ -513,6 +515,7 @@ void disable_heater() #if TEMP_1_PIN > -1 target_raw[1]=0; + soft_pwm[1]=0; #if HEATER_1_PIN > -1 digitalWrite(HEATER_1_PIN,LOW); #endif @@ -520,6 +523,7 @@ void disable_heater() #if TEMP_2_PIN > -1 target_raw[2]=0; + soft_pwm[2]=0; #if HEATER_2_PIN > -1 digitalWrite(HEATER_2_PIN,LOW); #endif @@ -533,6 +537,26 @@ void disable_heater() #endif } +void max_temp_error(uint8_t e) { + digitalWrite(heater_pin_map[e], 0); + SERIAL_ERROR_START; + SERIAL_ERRORLN(e); + SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !"); +} + +void min_temp_error(uint8_t e) { + digitalWrite(heater_pin_map[e], 0); + SERIAL_ERROR_START; + SERIAL_ERRORLN(e); + SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !"); +} + +void bed_max_temp_error(void) { + digitalWrite(HEATER_BED_PIN, 0); + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!"); +} + // Timer 0 is shared with millies ISR(TIMER0_COMPB_vect) { @@ -543,6 +567,33 @@ ISR(TIMER0_COMPB_vect) static unsigned long raw_temp_2_value = 0; static unsigned long raw_temp_bed_value = 0; static unsigned char temp_state = 0; + static unsigned char pwm_count = 1; + static unsigned char soft_pwm_0; + static unsigned char soft_pwm_1; + static unsigned char soft_pwm_2; + + if(pwm_count == 0){ + soft_pwm_0 = soft_pwm[0]; + if(soft_pwm_0 > 0) WRITE(HEATER_0_PIN,1); + #if EXTRUDERS > 1 + soft_pwm_1 = soft_pwm[1]; + if(soft_pwm_1 > 0) WRITE(HEATER_1_PIN,1); + #endif + #if EXTRUDERS > 2 + soft_pwm_2 = soft_pwm[2]; + if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); + #endif + } + if(soft_pwm_0 <= pwm_count) WRITE(HEATER_0_PIN,0); + #if EXTRUDERS > 1 + if(soft_pwm_1 <= pwm_count) WRITE(HEATER_1_PIN,0); + #endif + #if EXTRUDERS > 2 + if(soft_pwm_2 <= pwm_count) WRITE(HEATER_2_PIN,0); + #endif + + pwm_count++; + pwm_count &= 0x7f; switch(temp_state) { case 0: // Prepare TEMP_0 @@ -628,10 +679,10 @@ ISR(TIMER0_COMPB_vect) temp_state = 0; temp_count++; break; - default: - SERIAL_ERROR_START; - SERIAL_ERRORLNPGM("Temp measurement error!"); - break; +// default: +// SERIAL_ERROR_START; +// SERIAL_ERRORLNPGM("Temp measurement error!"); +// break; } if(temp_count >= 16) // 8 ms * 16 = 128ms. @@ -671,21 +722,15 @@ ISR(TIMER0_COMPB_vect) raw_temp_2_value = 0; raw_temp_bed_value = 0; - for(int e = 0; e < EXTRUDERS; e++) { + for(unsigned char e = 0; e < EXTRUDERS; e++) { if(current_raw[e] >= maxttemp[e]) { target_raw[e] = 0; - digitalWrite(heater_pin_map[e], 0); - SERIAL_ERROR_START; - SERIAL_ERRORLN((int)e); - SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !"); - kill(); + max_temp_error(e); + kill();; } if(current_raw[e] <= minttemp[e]) { target_raw[e] = 0; - digitalWrite(heater_pin_map[e], 0); - SERIAL_ERROR_START; - SERIAL_ERRORLN(e); - SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !"); + min_temp_error(e); kill(); } } @@ -693,9 +738,7 @@ ISR(TIMER0_COMPB_vect) #if defined(BED_MAXTEMP) && (HEATER_BED_PIN > -1) if(current_raw_bed >= bed_maxttemp) { target_raw_bed = 0; - digitalWrite(HEATER_BED_PIN, 0); - SERIAL_ERROR_START; - SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!"); + bed_max_temp_error(); kill(); } #endif diff --git a/Marlin/temperature.h b/Marlin/temperature.h index 15bc8a835..aa0d6c4f5 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -1,143 +1,144 @@ -/* - temperature.h - temperature controller - Part of Marlin - - Copyright (c) 2011 Erik van der Zalm - - Grbl is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Grbl is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Grbl. If not, see . -*/ - -#ifndef temperature_h -#define temperature_h - -#include "Marlin.h" -#include "fastio.h" -#ifdef PID_ADD_EXTRUSION_RATE - #include "stepper.h" -#endif - -// public functions -void tp_init(); //initialise the heating -void manage_heater(); //it is critical that this is called periodically. - -//low leven conversion routines -// do not use this routines and variables outsie of temperature.cpp -int temp2analog(int celsius, uint8_t e); -int temp2analogBed(int celsius); -float analog2temp(int raw, uint8_t e); -float analog2tempBed(int raw); -extern int target_raw[EXTRUDERS]; -extern int heatingtarget_raw[EXTRUDERS]; -extern int current_raw[EXTRUDERS]; -extern int target_raw_bed; -extern int current_raw_bed; -extern float Kp,Ki,Kd,Kc; - -#ifdef PIDTEMP - extern float pid_setpoint[EXTRUDERS]; -#endif - -#ifdef WATCHPERIOD - extern int watch_raw[EXTRUDERS] ; - extern unsigned long watchmillis; -#endif - - -//high level conversion routines, for use outside of temperature.cpp -//inline so that there is no performance decrease. -//deg=degreeCelsius - -FORCE_INLINE float degHotend(uint8_t extruder) { - return analog2temp(current_raw[extruder], extruder); -}; - -FORCE_INLINE float degBed() { - return analog2tempBed(current_raw_bed); -}; - -FORCE_INLINE float degTargetHotend(uint8_t extruder) { - return analog2temp(target_raw[extruder], extruder); -}; - -FORCE_INLINE float degTargetBed() { - return analog2tempBed(target_raw_bed); -}; - -FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) { - target_raw[extruder] = temp2analog(celsius, extruder); -#ifdef PIDTEMP - pid_setpoint[extruder] = celsius; -#endif //PIDTEMP -}; - -FORCE_INLINE void setTargetBed(const float &celsius) { - target_raw_bed = temp2analogBed(celsius); -}; - -FORCE_INLINE bool isHeatingHotend(uint8_t extruder){ - return target_raw[extruder] > current_raw[extruder]; -}; - -FORCE_INLINE bool isHeatingBed() { - return target_raw_bed > current_raw_bed; -}; - -FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { - return target_raw[extruder] < current_raw[extruder]; -}; - -FORCE_INLINE bool isCoolingBed() { - return target_raw_bed < current_raw_bed; -}; - -#define degHotend0() degHotend(0) -#define degTargetHotend0() degTargetHotend(0) -#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0) -#define isHeatingHotend0() isHeatingHotend(0) -#define isCoolingHotend0() isCoolingHotend(0) -#if EXTRUDERS > 1 -#define degHotend1() degHotend(1) -#define degTargetHotend1() degTargetHotend(1) -#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1) -#define isHeatingHotend1() isHeatingHotend(1) -#define isCoolingHotend1() isCoolingHotend(1) -#endif -#if EXTRUDERS > 2 -#define degHotend2() degHotend(2) -#define degTargetHotend2() degTargetHotend(2) -#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2) -#define isHeatingHotend2() isHeatingHotend(2) -#define isCoolingHotend2() isCoolingHotend(2) -#endif -#if EXTRUDERS > 3 -#error Invalid number of extruders -#endif - -FORCE_INLINE void autotempShutdown(){ - #ifdef AUTOTEMP - if(autotemp_enabled) - { - autotemp_enabled=false; - if(degTargetHotend(ACTIVE_EXTRUDER)>autotemp_min) - setTargetHotend(0,ACTIVE_EXTRUDER); - } - #endif -} - -void disable_heater(); -void setWatch(); -void updatePID(); - -#endif +/* + temperature.h - temperature controller + Part of Marlin + + Copyright (c) 2011 Erik van der Zalm + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +#ifndef temperature_h +#define temperature_h + +#include "Marlin.h" +#include "fastio.h" +#ifdef PID_ADD_EXTRUSION_RATE + #include "stepper.h" +#endif + +// public functions +void tp_init(); //initialise the heating +void manage_heater(); //it is critical that this is called periodically. + +//low leven conversion routines +// do not use this routines and variables outsie of temperature.cpp +int temp2analog(int celsius, uint8_t e); +int temp2analogBed(int celsius); +float analog2temp(int raw, uint8_t e); +float analog2tempBed(int raw); +extern int target_raw[EXTRUDERS]; +extern int heatingtarget_raw[EXTRUDERS]; +extern int current_raw[EXTRUDERS]; +extern int target_raw_bed; +extern int current_raw_bed; +extern float Kp,Ki,Kd,Kc; + +#ifdef PIDTEMP + extern float pid_setpoint[EXTRUDERS]; +#endif + +#ifdef WATCHPERIOD + extern int watch_raw[EXTRUDERS] ; + extern unsigned long watchmillis; +#endif + + +//high level conversion routines, for use outside of temperature.cpp +//inline so that there is no performance decrease. +//deg=degreeCelsius + +FORCE_INLINE float degHotend(uint8_t extruder) { + return analog2temp(current_raw[extruder], extruder); +}; + +FORCE_INLINE float degBed() { + return analog2tempBed(current_raw_bed); +}; + +FORCE_INLINE float degTargetHotend(uint8_t extruder) { + return analog2temp(target_raw[extruder], extruder); +}; + +FORCE_INLINE float degTargetBed() { + return analog2tempBed(target_raw_bed); +}; + +FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) { + target_raw[extruder] = temp2analog(celsius, extruder); +#ifdef PIDTEMP + pid_setpoint[extruder] = celsius; +#endif //PIDTEMP +}; + +FORCE_INLINE void setTargetBed(const float &celsius) { + target_raw_bed = temp2analogBed(celsius); +}; + +FORCE_INLINE bool isHeatingHotend(uint8_t extruder){ + return target_raw[extruder] > current_raw[extruder]; +}; + +FORCE_INLINE bool isHeatingBed() { + return target_raw_bed > current_raw_bed; +}; + +FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { + return target_raw[extruder] < current_raw[extruder]; +}; + +FORCE_INLINE bool isCoolingBed() { + return target_raw_bed < current_raw_bed; +}; + +#define degHotend0() degHotend(0) +#define degTargetHotend0() degTargetHotend(0) +#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0) +#define isHeatingHotend0() isHeatingHotend(0) +#define isCoolingHotend0() isCoolingHotend(0) +#if EXTRUDERS > 1 +#define degHotend1() degHotend(1) +#define degTargetHotend1() degTargetHotend(1) +#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1) +#define isHeatingHotend1() isHeatingHotend(1) +#define isCoolingHotend1() isCoolingHotend(1) +#endif +#if EXTRUDERS > 2 +#define degHotend2() degHotend(2) +#define degTargetHotend2() degTargetHotend(2) +#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2) +#define isHeatingHotend2() isHeatingHotend(2) +#define isCoolingHotend2() isCoolingHotend(2) +#endif +#if EXTRUDERS > 3 +#error Invalid number of extruders +#endif + +FORCE_INLINE void autotempShutdown(){ + #ifdef AUTOTEMP + if(autotemp_enabled) + { + autotemp_enabled=false; + if(degTargetHotend(ACTIVE_EXTRUDER)>autotemp_min) + setTargetHotend(0,ACTIVE_EXTRUDER); + } + #endif +} + +int getHeaterPower(int heater); +void disable_heater(); +void setWatch(); +void updatePID(); + +#endif diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde index 88f8f32fb..d5772750d 100644 --- a/Marlin/ultralcd.pde +++ b/Marlin/ultralcd.pde @@ -1,1839 +1,1843 @@ -#include "ultralcd.h" -#ifdef ULTRA_LCD - -//=========================================================================== -//=============================imported variables============================ -//=========================================================================== - -extern volatile int feedmultiply; -extern volatile bool feedmultiplychanged; - -extern long position[4]; -extern CardReader card; - -//=========================================================================== -//=============================public variables============================ -//=========================================================================== -volatile char buttons=0; //the last checked buttons in a bit array. -int encoderpos=0; -short lastenc=0; - - -//=========================================================================== -//=============================private variables============================ -//=========================================================================== -static char messagetext[LCD_WIDTH]=""; - -//return for string conversion routines -static char conv[8]; - -#include -LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 - -static unsigned long previous_millis_lcd=0; -static long previous_millis_buttons=0; - - -#ifdef NEWPANEL - static long blocking=0; -#else - static long blocking[8]={0,0,0,0,0,0,0,0}; -#endif - -static MainMenu menu; - -#include - -void lcdProgMemprint(const char *str) -{ - char ch=pgm_read_byte(str); - while(ch) - { - lcd.print(ch); - ch=pgm_read_byte(++str); - } -} -#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x)) - - -//=========================================================================== -//=============================functions ============================ -//=========================================================================== - -FORCE_INLINE int intround(const float &x){return int(0.5+x);} - -void lcd_status(const char* message) -{ - strncpy(messagetext,message,LCD_WIDTH); - messagetext[strlen(message)]=0; -} - -void lcd_statuspgm(const char* message) -{ - char ch=pgm_read_byte(message); - char *target=messagetext; - uint8_t cnt=0; - while(ch &&cnt>1; - if(READ(SHIFT_OUT)) - newbutton|=(1<<7); - WRITE(SHIFT_CLK,HIGH); - WRITE(SHIFT_CLK,LOW); - } - buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 - #endif - - //manage encoder rotation - char enc=0; - if(buttons&EN_A) - enc|=(1<<0); - if(buttons&EN_B) - enc|=(1<<1); - if(enc!=lastenc) - { - switch(enc) - { - case encrot0: - if(lastenc==encrot3) - encoderpos++; - else if(lastenc==encrot1) - encoderpos--; - break; - case encrot1: - if(lastenc==encrot0) - encoderpos++; - else if(lastenc==encrot2) - encoderpos--; - break; - case encrot2: - if(lastenc==encrot1) - encoderpos++; - else if(lastenc==encrot3) - encoderpos--; - break; - case encrot3: - if(lastenc==encrot2) - encoderpos++; - else if(lastenc==encrot0) - encoderpos--; - break; - default: - ; - } - } - lastenc=enc; -} - -#endif - -MainMenu::MainMenu() -{ - status=Main_Status; - displayStartingRow=0; - activeline=0; - force_lcd_update=true; - #ifdef ULTIPANEL - buttons_init(); - #endif - lcd_init(); - linechanging=false; - tune=false; -} - -void MainMenu::showStatus() -{ -#if LCD_HEIGHT==4 - static int olddegHotEnd0=-1; - static int oldtargetHotEnd0=-1; - //force_lcd_update=true; - if(force_lcd_update||feedmultiplychanged) //initial display of content - { - feedmultiplychanged=false; - encoderpos=feedmultiply; - clear(); - lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 "); - #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 - lcd.setCursor(10,0);lcdprintPGM("B123/567\001 "); - #endif - } - - int tHotEnd0=intround(degHotend0()); - if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) //>1 because otherwise the lcd is refreshed to often. - { - lcd.setCursor(1,0); - lcd.print(ftostr3(tHotEnd0)); - olddegHotEnd0=tHotEnd0; - } - int ttHotEnd0=intround(degTargetHotend0()); - if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) - { - lcd.setCursor(5,0); - lcd.print(ftostr3(ttHotEnd0)); - oldtargetHotEnd0=ttHotEnd0; - } - #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 - static int oldtBed=-1; - static int oldtargetBed=-1; - int tBed=intround(degBed()); - if((tBed!=oldtBed)||force_lcd_update) - { - lcd.setCursor(1,0); - lcd.print(ftostr3(tBed)); - oldtBed=tBed; - } - int targetBed=intround(degTargetBed()); - if((targetBed!=oldtargetBed)||force_lcd_update) - { - lcd.setCursor(5,0); - lcd.print(ftostr3(targetBed)); - oldtargetBed=targetBed; - } - #endif - //starttime=2; - static uint16_t oldtime=0; - if(starttime!=0) - { - lcd.setCursor(0,1); - uint16_t time=millis()/60000-starttime/60000; - - if(starttime!=oldtime) - { - lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m"); - oldtime=time; - } - } - static int oldzpos=0; - int currentz=current_position[2]*10; - if((currentz!=oldzpos)||force_lcd_update) - { - lcd.setCursor(10,1); - lcdprintPGM("Z:");lcd.print(itostr31(currentz)); - oldzpos=currentz; - } - static int oldfeedmultiply=0; - int curfeedmultiply=feedmultiply; - if(encoderpos!=curfeedmultiply||force_lcd_update) - { - curfeedmultiply=encoderpos; - if(curfeedmultiply<10) - curfeedmultiply=10; - if(curfeedmultiply>999) - curfeedmultiply=999; - feedmultiply=curfeedmultiply; - encoderpos=curfeedmultiply; - } - if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update) - { - oldfeedmultiply=curfeedmultiply; - lcd.setCursor(0,2); - lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% "); - } - if(messagetext[0]!='\0') - { - lcd.setCursor(0,LCD_HEIGHT-1); - lcd.print(messagetext); - uint8_t n=strlen(messagetext); - for(int8_t i=0;i1)||force_lcd_update) - { - lcd.setCursor(1,0); - lcd.print(ftostr3(tHotEnd0)); - olddegHotEnd0=tHotEnd0; - } - if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) - { - lcd.setCursor(5,0); - lcd.print(ftostr3(ttHotEnd0)); - oldtargetHotEnd0=ttHotEnd0; - } - - if(messagetext[0]!='\0') - { - lcd.setCursor(0,LCD_HEIGHT-1); - lcd.print(messagetext); - uint8_t n=strlen(messagetext); - for(int8_t i=0;i400) encoderpos=400; - feedmultiply = encoderpos; - feedmultiplychanged=true; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemT_nozzle: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" \002Nozzle:"); - lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0()))); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=intround(degTargetHotend0()); - } - else - { - setTargetHotend0(encoderpos); - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>260) encoderpos=260; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - }break; - - case ItemT_fan: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Fan speed:"); - lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=fanpwm; - } - else - { - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>255) encoderpos=255; - fanpwm=encoderpos; - analogWrite(FAN_PIN, fanpwm); - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemT_flow://axis_steps_per_unit[i] = code_value(); - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Flow:"); - lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)axis_steps_per_unit[3]; - } - else - { - float factor=float(encoderpos)/float(axis_steps_per_unit[3]); - position[E_AXIS]=lround(position[E_AXIS]*factor); - //current_position[3]*=factor; - axis_steps_per_unit[E_AXIS]= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<5) encoderpos=5; - if(encoderpos>9999) encoderpos=9999; - lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); - } - - }break; - default: - break; - } - line++; - } - updateActiveLines(ItemT_fan,encoderpos); -} - -//does not work -// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \ -// {\ -// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \ -// if(activeline==line) \ -// { \ -// if(CLICKED) \ -// { \ -// linechanging=!linechanging; \ -// if(linechanging) {enter_action;} \ -// else {accept_action;} \ -// } \ -// else \ -// if(linechanging) {change_action};}\ -// } -// - -enum { - ItemCT_exit,ItemCT_nozzle, -#ifdef AUTOTEMP - ItemCT_autotempactive, - ItemCT_autotempmin,ItemCT_autotempmax,ItemCT_autotempfact, -#endif - ItemCT_fan, - ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C -}; - -void MainMenu::showControlTemp() -{ - uint8_t line=0; - clearIfNecessary(); - for(int8_t i=lineoffset;i260) encoderpos=260; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - #ifdef AUTOTEMP - case ItemCT_autotempmin: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" \002 Min:"); - lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=intround(autotemp_min); - } - else - { - autotemp_min=encoderpos; - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>260) encoderpos=260; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemCT_autotempmax: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" \002 Max:"); - lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=intround(autotemp_max); - } - else - { - autotemp_max=encoderpos; - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>260) encoderpos=260; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemCT_autotempfact: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" \002 Fact:"); - lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=intround(autotemp_factor*100); - } - else - { - autotemp_max=encoderpos; - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>99) encoderpos=99; - lcd.setCursor(13,line);lcd.print(ftostr32(encoderpos/100.)); - } - - }break; - case ItemCT_autotempactive: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Autotemp:"); - lcd.setCursor(13,line); - if(autotemp_enabled) - lcdprintPGM("On"); - else - lcdprintPGM("Off"); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - autotemp_enabled=!autotemp_enabled; - lcd.setCursor(13,line); - if(autotemp_enabled) - lcdprintPGM("On "); - else - lcdprintPGM("Off"); - BLOCK; - } - - }break; - #endif //autotemp - case ItemCT_fan: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Fan speed:"); - lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=fanpwm; - } - else - { - encoderpos=activeline*lcdslow; - beepshort(); - } - BLOCK; - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>255) encoderpos=255; - fanpwm=encoderpos; - analogWrite(FAN_PIN, fanpwm); - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemCT_PID_P: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" PID-P: "); - lcd.setCursor(13,line);lcd.print(itostr4(Kp)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)Kp; - } - else - { - Kp= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<1) encoderpos=1; - if(encoderpos>9990) encoderpos=9990; - lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); - } - - }break; - case ItemCT_PID_I: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" PID-I: "); - lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)(Ki*10/PID_dT); - } - else - { - Ki= encoderpos/10.*PID_dT; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>9990) encoderpos=9990; - lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.)); - } - - }break; - case ItemCT_PID_D: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" PID-D: "); - lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT)); - } - - if((activeline!=line) ) - break; - - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)(Kd/5./PID_dT); - } - else - { - Kd= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>9990) encoderpos=9990; - lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); - } - - }break; - case ItemCT_PID_C: - #ifdef PID_ADD_EXTRUSION_RATE - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" PID-C: "); - lcd.setCursor(13,line);lcd.print(itostr3(Kc)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)Kc; - } - else - { - Kc= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - } - #endif - break; - default: - break; - } - line++; - } - #ifdef PID_ADD_EXTRUSION_RATE - updateActiveLines(ItemCT_PID_C,encoderpos); - #else - updateActiveLines(ItemCT_PID_D,encoderpos); - #endif -} - - -enum { - ItemCM_exit, - ItemCM_acc, ItemCM_xyjerk, - ItemCM_vmaxx, ItemCM_vmaxy, ItemCM_vmaxz, ItemCM_vmaxe, - ItemCM_vtravmin,ItemCM_vmin, - ItemCM_amaxx, ItemCM_amaxy, ItemCM_amaxz, ItemCM_amaxe, - ItemCM_aret,ItemCM_esteps -}; - - - -void MainMenu::showControlMotion() -{ - uint8_t line=0; - clearIfNecessary(); - for(int8_t i=lineoffset;i990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); - } - - }break; - case ItemCM_xyjerk: //max_xy_jerk - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Vxy-jerk: "); - lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)max_xy_jerk; - } - else - { - max_xy_jerk= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<1) encoderpos=1; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - - case ItemCM_vmaxx: - case ItemCM_vmaxy: - case ItemCM_vmaxz: - case ItemCM_vmaxe: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Vmax "); - if(i==ItemCM_vmaxx)lcdprintPGM("x:"); - if(i==ItemCM_vmaxy)lcdprintPGM("y:"); - if(i==ItemCM_vmaxz)lcdprintPGM("z:"); - if(i==ItemCM_vmaxe)lcdprintPGM("e:"); - lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx])); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)max_feedrate[i-ItemCM_vmaxx]; - } - else - { - max_feedrate[i-ItemCM_vmaxx]= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<1) encoderpos=1; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - - case ItemCM_vmin: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Vmin:"); - lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)(minimumfeedrate); - } - else - { - minimumfeedrate= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - case ItemCM_vtravmin: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" VTrav min:"); - lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate)); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)mintravelfeedrate; - } - else - { - mintravelfeedrate= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<0) encoderpos=0; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); - } - - }break; - - case ItemCM_amaxx: - case ItemCM_amaxy: - case ItemCM_amaxz: - case ItemCM_amaxe: - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Amax "); - if(i==ItemCM_amaxx)lcdprintPGM("x:"); - if(i==ItemCM_amaxy)lcdprintPGM("y:"); - if(i==ItemCM_amaxz)lcdprintPGM("z:"); - if(i==ItemCM_amaxe)lcdprintPGM("e:"); - lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00"); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100; - } - else - { - max_acceleration_units_per_sq_second[i-ItemCM_amaxx]= encoderpos*100; - encoderpos=activeline*lcdslow; - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<1) encoderpos=1; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); - } - - }break; - case ItemCM_aret://float retract_acceleration = 7000; - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" A-retract:"); - lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00"); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)retract_acceleration/100; - } - else - { - retract_acceleration= encoderpos*100; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<10) encoderpos=10; - if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); - } - - }break; - case ItemCM_esteps://axis_steps_per_unit[i] = code_value(); - { - if(force_lcd_update) - { - lcd.setCursor(0,line);lcdprintPGM(" Esteps/mm:"); - lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); - } - - if((activeline!=line) ) - break; - - if(CLICKED) - { - linechanging=!linechanging; - if(linechanging) - { - encoderpos=(int)axis_steps_per_unit[3]; - } - else - { - float factor=float(encoderpos)/float(axis_steps_per_unit[3]); - position[E_AXIS]=lround(position[E_AXIS]*factor); - //current_position[3]*=factor; - axis_steps_per_unit[E_AXIS]= encoderpos; - encoderpos=activeline*lcdslow; - - } - BLOCK; - beepshort(); - } - if(linechanging) - { - if(encoderpos<5) encoderpos=5; - if(encoderpos>9999) encoderpos=9999; - lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); - } - - }break; - default: - break; - } - line++; - } - updateActiveLines(ItemCM_esteps,encoderpos); -} - - -enum { - ItemC_exit,ItemC_temp,ItemC_move, - ItemC_store, ItemC_load,ItemC_failsafe -}; - -void MainMenu::showControl() -{ - uint8_t line=0; - clearIfNecessary(); - for(int8_t i=lineoffset;i=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -char *ftostr32(const float &x) -{ - int xx=x*100; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/100)%10+'0'; - conv[2]='.'; - conv[3]=(xx/10)%10+'0'; - conv[4]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -char *itostr31(const int &xx) -{ - conv[0]=(xx>=0)?'+':'-'; - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -char *itostr3(const int &xx) -{ - conv[0]=(xx/100)%10+'0'; - conv[1]=(xx/10)%10+'0'; - conv[2]=(xx)%10+'0'; - conv[3]=0; - return conv; -} - -char *itostr4(const int &xx) -{ - conv[0]=(xx/1000)%10+'0'; - conv[1]=(xx/100)%10+'0'; - conv[2]=(xx/10)%10+'0'; - conv[3]=(xx)%10+'0'; - conv[4]=0; - return conv; -} - -// convert float to string with +1234.5 format -char *ftostr51(const float &x) -{ - int xx=x*10; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/10000)%10+'0'; - conv[2]=(xx/1000)%10+'0'; - conv[3]=(xx/100)%10+'0'; - conv[4]=(xx/10)%10+'0'; - conv[5]='.'; - conv[6]=(xx)%10+'0'; - conv[7]=0; - return conv; -} - - -#endif //ULTRA_LCD - +#include "ultralcd.h" +#ifdef ULTRA_LCD + +//=========================================================================== +//=============================imported variables============================ +//=========================================================================== + +extern volatile int feedmultiply; +extern volatile bool feedmultiplychanged; + +extern long position[4]; +extern CardReader card; + +//=========================================================================== +//=============================public variables============================ +//=========================================================================== +volatile char buttons=0; //the last checked buttons in a bit array. +int encoderpos=0; +short lastenc=0; + + +//=========================================================================== +//=============================private variables============================ +//=========================================================================== +static char messagetext[LCD_WIDTH]=""; + +//return for string conversion routines +static char conv[8]; + +#include +LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 + +static unsigned long previous_millis_lcd=0; +static long previous_millis_buttons=0; + + +#ifdef NEWPANEL + static long blocking=0; +#else + static long blocking[8]={0,0,0,0,0,0,0,0}; +#endif + +static MainMenu menu; + +#include + +void lcdProgMemprint(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + lcd.print(ch); + ch=pgm_read_byte(++str); + } +} +#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x)) + + +//=========================================================================== +//=============================functions ============================ +//=========================================================================== + +FORCE_INLINE int intround(const float &x){return int(0.5+x);} + +void lcd_status(const char* message) +{ + strncpy(messagetext,message,LCD_WIDTH); + messagetext[strlen(message)]=0; +} + +void lcd_statuspgm(const char* message) +{ + char ch=pgm_read_byte(message); + char *target=messagetext; + uint8_t cnt=0; + while(ch &&cntms)) + buttons &= ~(1<>1; + if(READ(SHIFT_OUT)) + newbutton|=(1<<7); + WRITE(SHIFT_CLK,HIGH); + WRITE(SHIFT_CLK,LOW); + } + buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 + #endif + + //manage encoder rotation + char enc=0; + if(buttons&EN_A) + enc|=(1<<0); + if(buttons&EN_B) + enc|=(1<<1); + if(enc!=lastenc) + { + switch(enc) + { + case encrot0: + if(lastenc==encrot3) + encoderpos++; + else if(lastenc==encrot1) + encoderpos--; + break; + case encrot1: + if(lastenc==encrot0) + encoderpos++; + else if(lastenc==encrot2) + encoderpos--; + break; + case encrot2: + if(lastenc==encrot1) + encoderpos++; + else if(lastenc==encrot3) + encoderpos--; + break; + case encrot3: + if(lastenc==encrot2) + encoderpos++; + else if(lastenc==encrot0) + encoderpos--; + break; + default: + ; + } + } + lastenc=enc; +} + +#endif + +MainMenu::MainMenu() +{ + status=Main_Status; + displayStartingRow=0; + activeline=0; + force_lcd_update=true; + #ifdef ULTIPANEL + buttons_init(); + #endif + lcd_init(); + linechanging=false; + tune=false; +} + +void MainMenu::showStatus() +{ +#if LCD_HEIGHT==4 + static int olddegHotEnd0=-1; + static int oldtargetHotEnd0=-1; + //force_lcd_update=true; + if(force_lcd_update||feedmultiplychanged) //initial display of content + { + feedmultiplychanged=false; + encoderpos=feedmultiply; + clear(); + lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 "); + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + lcd.setCursor(10,0);lcdprintPGM("B123/567\001 "); + #endif + } + + int tHotEnd0=intround(degHotend0()); + if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) //>1 because otherwise the lcd is refreshed to often. + { + lcd.setCursor(1,0); + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; + } + int ttHotEnd0=intround(degTargetHotend0()); + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; + } + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + static int oldtBed=-1; + static int oldtargetBed=-1; + int tBed=intround(degBed()); + if((tBed!=oldtBed)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(tBed)); + oldtBed=tBed; + } + int targetBed=intround(degTargetBed()); + if((targetBed!=oldtargetBed)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(targetBed)); + oldtargetBed=targetBed; + } + #endif + //starttime=2; + static uint16_t oldtime=0; + if(starttime!=0) + { + lcd.setCursor(0,1); + uint16_t time=millis()/60000-starttime/60000; + + if(starttime!=oldtime) + { + lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m"); + oldtime=time; + } + } + static int oldzpos=0; + int currentz=current_position[2]*10; + if((currentz!=oldzpos)||force_lcd_update) + { + lcd.setCursor(10,1); + lcdprintPGM("Z:");lcd.print(itostr31(currentz)); + oldzpos=currentz; + } + static int oldfeedmultiply=0; + int curfeedmultiply=feedmultiply; + if(encoderpos!=curfeedmultiply||force_lcd_update) + { + curfeedmultiply=encoderpos; + if(curfeedmultiply<10) + curfeedmultiply=10; + if(curfeedmultiply>999) + curfeedmultiply=999; + feedmultiply=curfeedmultiply; + encoderpos=curfeedmultiply; + } + if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update) + { + oldfeedmultiply=curfeedmultiply; + lcd.setCursor(0,2); + lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% "); + } + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(messagetext); + uint8_t n=strlen(messagetext); + for(int8_t i=0;i1)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; + } + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; + } + + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(messagetext); + uint8_t n=strlen(messagetext); + for(int8_t i=0;i400) encoderpos=400; + feedmultiply = encoderpos; + feedmultiplychanged=true; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemT_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" \002Nozzle:"); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetHotend0()); + } + else + { + setTargetHotend0(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemT_fan: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Fan speed:"); + lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=fanpwm; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>255) encoderpos=255; + fanpwm=encoderpos; + analogWrite(FAN_PIN, fanpwm); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemT_flow://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Flow:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[3]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[3]); + position[E_AXIS]=lround(position[E_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[E_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemT_fan,encoderpos); +} + +//does not work +// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \ +// {\ +// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \ +// if(activeline==line) \ +// { \ +// if(CLICKED) \ +// { \ +// linechanging=!linechanging; \ +// if(linechanging) {enter_action;} \ +// else {accept_action;} \ +// } \ +// else \ +// if(linechanging) {change_action};}\ +// } +// + +enum { + ItemCT_exit,ItemCT_nozzle, +#ifdef AUTOTEMP + ItemCT_autotempactive, + ItemCT_autotempmin,ItemCT_autotempmax,ItemCT_autotempfact, +#endif + ItemCT_fan, + ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C +}; + +void MainMenu::showControlTemp() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + #ifdef AUTOTEMP + case ItemCT_autotempmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" \002 Min:"); + lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_min); + } + else + { + autotemp_min=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCT_autotempmax: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" \002 Max:"); + lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_max); + } + else + { + autotemp_max=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCT_autotempfact: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" \002 Fact:"); + lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_factor*100); + } + else + { + autotemp_max=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>99) encoderpos=99; + lcd.setCursor(13,line);lcd.print(ftostr32(encoderpos/100.)); + } + + }break; + case ItemCT_autotempactive: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Autotemp:"); + lcd.setCursor(13,line); + if(autotemp_enabled) + lcdprintPGM("On"); + else + lcdprintPGM("Off"); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + autotemp_enabled=!autotemp_enabled; + lcd.setCursor(13,line); + if(autotemp_enabled) + lcdprintPGM("On "); + else + lcdprintPGM("Off"); + BLOCK; + } + + }break; + #endif //autotemp + case ItemCT_fan: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Fan speed:"); + lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=fanpwm; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>255) encoderpos=255; + fanpwm=encoderpos; + analogWrite(FAN_PIN, fanpwm); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCT_PID_P: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" PID-P: "); + lcd.setCursor(13,line);lcd.print(itostr4(Kp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)Kp; + } + else + { + Kp= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCT_PID_I: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" PID-I: "); + lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)(Ki*10/PID_dT); + } + else + { + Ki= encoderpos/10.*PID_dT; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.)); + } + + }break; + case ItemCT_PID_D: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" PID-D: "); + lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT)); + } + + if((activeline!=line) ) + break; + + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)(Kd/5./PID_dT); + } + else + { + Kd= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCT_PID_C: + #ifdef PID_ADD_EXTRUSION_RATE + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" PID-C: "); + lcd.setCursor(13,line);lcd.print(itostr3(Kc)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)Kc; + } + else + { + Kc= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + } + #endif + break; + default: + break; + } + line++; + } + #ifdef PID_ADD_EXTRUSION_RATE + updateActiveLines(ItemCT_PID_C,encoderpos); + #else + updateActiveLines(ItemCT_PID_D,encoderpos); + #endif +} + + +enum { + ItemCM_exit, + ItemCM_acc, ItemCM_xyjerk, + ItemCM_vmaxx, ItemCM_vmaxy, ItemCM_vmaxz, ItemCM_vmaxe, + ItemCM_vtravmin,ItemCM_vmin, + ItemCM_amaxx, ItemCM_amaxy, ItemCM_amaxz, ItemCM_amaxe, + ItemCM_aret,ItemCM_esteps +}; + + + +void MainMenu::showControlMotion() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + case ItemCM_xyjerk: //max_xy_jerk + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Vxy-jerk: "); + lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_xy_jerk; + } + else + { + max_xy_jerk= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_vmaxx: + case ItemCM_vmaxy: + case ItemCM_vmaxz: + case ItemCM_vmaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Vmax "); + if(i==ItemCM_vmaxx)lcdprintPGM("x:"); + if(i==ItemCM_vmaxy)lcdprintPGM("y:"); + if(i==ItemCM_vmaxz)lcdprintPGM("z:"); + if(i==ItemCM_vmaxe)lcdprintPGM("e:"); + lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_feedrate[i-ItemCM_vmaxx]; + } + else + { + max_feedrate[i-ItemCM_vmaxx]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_vmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Vmin:"); + lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)(minimumfeedrate); + } + else + { + minimumfeedrate= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCM_vtravmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" VTrav min:"); + lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)mintravelfeedrate; + } + else + { + mintravelfeedrate= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_amaxx: + case ItemCM_amaxy: + case ItemCM_amaxz: + case ItemCM_amaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Amax "); + if(i==ItemCM_amaxx)lcdprintPGM("x:"); + if(i==ItemCM_amaxy)lcdprintPGM("y:"); + if(i==ItemCM_amaxz)lcdprintPGM("z:"); + if(i==ItemCM_amaxe)lcdprintPGM("e:"); + lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00"); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100; + } + else + { + max_acceleration_units_per_sq_second[i-ItemCM_amaxx]= encoderpos*100; + encoderpos=activeline*lcdslow; + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + case ItemCM_aret://float retract_acceleration = 7000; + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" A-retract:"); + lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00"); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)retract_acceleration/100; + } + else + { + retract_acceleration= encoderpos*100; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<10) encoderpos=10; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + case ItemCM_esteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Esteps/mm:"); + lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(int)axis_steps_per_unit[3]; + } + else + { + float factor=float(encoderpos)/float(axis_steps_per_unit[3]); + position[E_AXIS]=lround(position[E_AXIS]*factor); + //current_position[3]*=factor; + axis_steps_per_unit[E_AXIS]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>9999) encoderpos=9999; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemCM_esteps,encoderpos); +} + + +enum { + ItemC_exit,ItemC_temp,ItemC_move, + ItemC_store, ItemC_load,ItemC_failsafe +}; + +void MainMenu::showControl() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *ftostr32(const float &x) +{ + int xx=x*100; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/100)%10+'0'; + conv[2]='.'; + conv[3]=(xx/10)%10+'0'; + conv[4]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr31(const int &xx) +{ + conv[0]=(xx>=0)?'+':'-'; + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr3(const int &xx) +{ + conv[0]=(xx/100)%10+'0'; + conv[1]=(xx/10)%10+'0'; + conv[2]=(xx)%10+'0'; + conv[3]=0; + return conv; +} + +char *itostr4(const int &xx) +{ + conv[0]=(xx/1000)%10+'0'; + conv[1]=(xx/100)%10+'0'; + conv[2]=(xx/10)%10+'0'; + conv[3]=(xx)%10+'0'; + conv[4]=0; + return conv; +} + +// convert float to string with +1234.5 format +char *ftostr51(const float &x) +{ + int xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]=(xx/10)%10+'0'; + conv[5]='.'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + + +#endif //ULTRA_LCD +