From 6b91b7b411da3e7dfd535670d8a096a7144a0ff2 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Wed, 1 Apr 2015 21:18:51 +0200
Subject: [PATCH 1/9] Mesh bed leveling: Added G29 S3 + finer steps in manual
 probing.

* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
---
 Marlin/Configuration.h |  4 ++++
 Marlin/Marlin_main.cpp | 54 +++++++++++++++++++++++++++++++++++-------
 Marlin/ultralcd.cpp    |  4 ++--
 3 files changed, 52 insertions(+), 10 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index a984923ea..5a6d483bf 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -387,6 +387,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#if defined(MANUAL_BED_LEVELING)
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #if defined(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 6b41be617..a327f209d 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2038,10 +2038,18 @@ inline void gcode_G28() {
    *
    * Parameters With MESH_BED_LEVELING:
    *
-   *  S0 Produce a mesh report
-   *  S1 Start probing mesh points
-   *  S2 Probe the next mesh point
+   *  S0              Produce a mesh report
+   *  S1              Start probing mesh points
+   *  S2              Probe the next mesh point
+   *  S3 Xn Yn Zn.nn  Manually modify a single point
    *
+   * The S0 report the points as below
+   *
+   *  +----> X-axis
+   *  |
+   *  |
+   *  v Y-axis
+   *  
    */
   inline void gcode_G29() {
 
@@ -2052,13 +2060,13 @@ inline void gcode_G28() {
     int state = 0;
     if (code_seen('S') || code_seen('s')) {
       state = code_value_long();
-      if (state < 0 || state > 2) {
-        SERIAL_PROTOCOLPGM("S out of range (0-2).\n");
+      if (state < 0 || state > 3) {
+        SERIAL_PROTOCOLPGM("S out of range (0-3).\n");
         return;
       }
     }
 
-    if (state == 0) { // Dump mesh_bed_leveling
+    if (state == 0) { // Produce a mesh report
       if (mbl.active) {
         SERIAL_PROTOCOLPGM("Num X,Y: ");
         SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
@@ -2078,14 +2086,14 @@ inline void gcode_G28() {
         SERIAL_PROTOCOLPGM("Mesh bed leveling not active.\n");
       }
 
-    } else if (state == 1) { // Begin probing mesh points
+    } else if (state == 1) { // Start probing mesh points
 
       mbl.reset();
       probe_point = 0;
       enquecommands_P(PSTR("G28"));
       enquecommands_P(PSTR("G29 S2"));
 
-    } else if (state == 2) { // Goto next point
+    } else if (state == 2) { // Probe the next mesh point
 
       if (probe_point < 0) {
         SERIAL_PROTOCOLPGM("Start mesh probing with \"G29 S1\" first.\n");
@@ -2119,6 +2127,36 @@ inline void gcode_G28() {
       plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
       st_synchronize();
       probe_point++;
+    } else if (state == 3) { // Manually modify a single point
+      int ix, iy;
+      float z;
+      if (code_seen('X') || code_seen('x')) {
+        ix = code_value_long()-1;
+        if (ix < 0 || ix >= MESH_NUM_X_POINTS) {
+          SERIAL_PROTOCOLPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").\n");
+          return;
+        }
+      } else {
+          SERIAL_PROTOCOLPGM("X not entered.\n");
+          return;
+      }
+      if (code_seen('Y') || code_seen('y')) {
+        iy = code_value_long()-1;
+        if (iy < 0 || iy >= MESH_NUM_Y_POINTS) {
+          SERIAL_PROTOCOLPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").\n");
+          return;
+        }
+      } else {
+          SERIAL_PROTOCOLPGM("Y not entered.\n");
+          return;
+      }
+      if (code_seen('Z') || code_seen('z')) {
+        z = code_value();
+      } else {
+          SERIAL_PROTOCOLPGM("Z not entered.\n");
+          return;
+      }
+      mbl.z_values[iy][ix] = z;
     }
   }
 
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index d2a2e6faa..e6da28e0f 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1795,14 +1795,14 @@ static void _lcd_level_bed()
 {
   if (encoderPosition != 0) {
     refresh_cmd_timeout();
-    current_position[Z_AXIS] += float((int)encoderPosition) * 0.05;
+    current_position[Z_AXIS] += float((int)encoderPosition) * MBL_Z_STEP;
     if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) current_position[Z_AXIS] = Z_MIN_POS;
     if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
     encoderPosition = 0;
     plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder);
     lcdDrawUpdate = 1;
   }
-  if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Z"), ftostr32(current_position[Z_AXIS]));
+  if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Z"), ftostr43(current_position[Z_AXIS]));
   static bool debounce_click = false;
   if (LCD_CLICKED) {
     if (!debounce_click) {

From 6bdebede27061868def31428f54840f3696999e0 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Wed, 1 Apr 2015 21:32:28 +0200
Subject: [PATCH 2/9] Added description in the documentation for the new parts.

---
 Documentation/MeshBedLeveling.md | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/MeshBedLeveling.md b/Documentation/MeshBedLeveling.md
index 21eabb6b0..7981a896c 100644
--- a/Documentation/MeshBedLeveling.md
+++ b/Documentation/MeshBedLeveling.md
@@ -28,6 +28,10 @@ In `Configuration.h` there are two options that can be enabled.
 
 There are also some values that can be set.
 
+The following will set the step distance used when manually turning the display encoder. Default is 0.025
+
+`MBL_Z_STEP` 
+
 Following four define the area to cover. Default 10mm from max bed size
 
 `MESH_MIN_X`<br/>
@@ -55,14 +59,14 @@ When selecting this option the printer will first do a homing, and then travel t
 
 If the EEPROM has been enable it can be good to issue a `M500` to get these points saved.
 
-Issuing a `G29` will return the state of the mesh leveling.
+Issuing a `G29` will return the state of the mesh leveling and report the probed points.
 
 Probing the bed with G-codes
 ----------------------------
 
 Probing the bed by G-codes follows the sequence much like doing it with the display.
 
-`G29` or `G29 S0` will return the state bed leveling.
+`G29` or `G29 S0` will return the state of the bed leveling and report the probed points. Where X=1 Y=1 is the top-left value and X=MESH_NUM_X_POINTS Y=MESH_NUM_Y_POINTS is bottom-right value. X per column and Y per row.
 
 `G29 S1` will initiate the bed leveling, homing and traveling to the first point to probe.
 
@@ -70,6 +74,8 @@ Then use your preferred Printer controller program, i.e. Printrun, to lower the
 
 `G29 S2` will store the point and travel to the next point until last point has been probed.
 
+`G29 S3 Xn Yn Zn.nn` will modify a single probed point. This can be used to tweak a badly probed point. Specify probe point where `Xn` and `Yn`, where `n` in `Xn` is between 1 and `MESH_NUM_X_POINTS`. Likewise for `Yn`. `Zn.nn` is the new Z value in that probed point. 
+
 Note
 ----
 

From 0e6514e7bd1adcdf582b14b45345ee5ddd8790b6 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Sun, 5 Apr 2015 04:13:34 +0200
Subject: [PATCH 3/9] Bug fix! Missed putting z value back in right slot after
 zigzag mod.

---
 Marlin/ultralcd.cpp | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 42a957dca..138c60df6 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1809,6 +1809,9 @@ static void _lcd_level_bed()
       debounce_click = true;
       int ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
       int iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
+      if (iy&1) { // Zig zag
+        ix = (MESH_NUM_X_POINTS - 1) - ix;
+      }
       mbl.set_z(ix, iy, current_position[Z_AXIS]);
       _lcd_level_bed_position++;
       if (_lcd_level_bed_position == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {

From 2f0081bbb5a1adc861db3a7f9868987807618c52 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Sun, 5 Apr 2015 04:16:16 +0200
Subject: [PATCH 4/9] Compile error fix! Fix for merge artifacts.

---
 Marlin/Marlin_main.cpp | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 1b9260de5..66afad7bf 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2045,6 +2045,9 @@ inline void gcode_G28() {
       return;
     }
 
+    int ix, iy;
+    float z;
+
     switch(state) {
       case MeshReport:
         if (mbl.active) {
@@ -2078,7 +2081,6 @@ inline void gcode_G28() {
           SERIAL_PROTOCOLLNPGM("Start mesh probing with \"G29 S1\" first.");
           return;
         }
-        int ix, iy;
         if (probe_point == 0) {
           // Set Z to a positive value before recording the first Z.
           current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
@@ -2115,8 +2117,6 @@ inline void gcode_G28() {
         break;
 
       case MeshSet:
-        int ix, iy;
-        float z;
         if (code_seen('X') || code_seen('x')) {
           ix = code_value_long()-1;
           if (ix < 0 || ix >= MESH_NUM_X_POINTS) {

From 61de6ecd54f0f256cd2f54397806e6be77520a72 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Sun, 5 Apr 2015 04:26:35 +0200
Subject: [PATCH 5/9] Added change to example Configuration.h's

---
 Marlin/configurator/config/Configuration.h                    | 4 ++++
 Marlin/example_configurations/Felix/Configuration.h           | 4 ++++
 Marlin/example_configurations/Hephestos/Configuration.h       | 4 ++++
 Marlin/example_configurations/K8200/Configuration.h           | 4 ++++
 Marlin/example_configurations/SCARA/Configuration.h           | 4 ++++
 Marlin/example_configurations/WITBOX/Configuration.h          | 4 ++++
 Marlin/example_configurations/delta/generic/Configuration.h   | 4 ++++
 .../example_configurations/delta/kossel_mini/Configuration.h  | 4 ++++
 Marlin/example_configurations/makibox/Configuration.h         | 4 ++++
 Marlin/example_configurations/tvrrug/Round2/Configuration.h   | 4 ++++
 10 files changed, 40 insertions(+)

diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index 5b0960fdd..bb8125ef1 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -412,6 +412,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 72d716989..49df589dd 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -364,6 +364,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index ac101be4d..f58fd8315 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -387,6 +387,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 6d743e937..07af43647 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -392,6 +392,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index f126ab99b..8a85e8e80 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -416,6 +416,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 265f73fce..ed964304f 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -386,6 +386,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 3218d2d9d..acd6d9f34 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -414,6 +414,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 489dca6d5..bc0a000e0 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -414,6 +414,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 45350960f..557b15fe2 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -384,6 +384,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 2c98a310f..e9158b041 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -386,6 +386,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // #define MANUAL_BED_LEVELING  // Add display menu option for bed leveling
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
+#ifdef MANUAL_BED_LEVELING
+  #define MBL_Z_STEP 0.025
+#endif  // MANUAL_BED_LEVELING
+
 #ifdef MESH_BED_LEVELING
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)

From d24ea7c03f7ddbb3645a9cfb136a620dbcb6dfc3 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Sun, 5 Apr 2015 05:14:06 +0200
Subject: [PATCH 6/9] Added Comment in hope of github seeing these updates

---
 Marlin/Configuration.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7de354f88..419e010dc 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -395,7 +395,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // #define MESH_BED_LEVELING    // Enable mesh bed leveling
 
 #ifdef MANUAL_BED_LEVELING
-  #define MBL_Z_STEP 0.025
+  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING

From 9a093b2e8fc780cc61d55d088f592ec44d370482 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Mon, 6 Apr 2015 19:38:59 +0200
Subject: [PATCH 7/9] Added #error + mention not to enable ABL and Mesh at the
 same time

---
 Documentation/MeshBedLeveling.md                              | 2 +-
 Marlin/Configuration.h                                        | 4 ++++
 Marlin/configurator/config/Configuration.h                    | 4 ++++
 Marlin/example_configurations/Felix/Configuration.h           | 4 ++++
 Marlin/example_configurations/Hephestos/Configuration.h       | 4 ++++
 Marlin/example_configurations/K8200/Configuration.h           | 4 ++++
 Marlin/example_configurations/SCARA/Configuration.h           | 4 ++++
 Marlin/example_configurations/WITBOX/Configuration.h          | 4 ++++
 Marlin/example_configurations/delta/generic/Configuration.h   | 4 ++++
 .../example_configurations/delta/kossel_mini/Configuration.h  | 4 ++++
 Marlin/example_configurations/makibox/Configuration.h         | 4 ++++
 Marlin/example_configurations/tvrrug/Round2/Configuration.h   | 4 ++++
 12 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/Documentation/MeshBedLeveling.md b/Documentation/MeshBedLeveling.md
index 7981a896c..09c1ec948 100644
--- a/Documentation/MeshBedLeveling.md
+++ b/Documentation/MeshBedLeveling.md
@@ -7,7 +7,7 @@ Background
 
 This mesh based method of leveling/compensating can compensate for an non-flat bed. There are various opinions about doing this. It was primarily written to compensate a RigidBot BIG bed (40x30cm) that was somewhat bent.
 
-Currently there is no automatic way to probe the bed like the Auto Bed Leveling feature. This might soon be implemented though, stay tuned.
+Currently there is no automatic way to probe the bed like the Auto Bed Leveling feature. So, you can not enable `ENABLE_AUTO_BED_LEVELING` at the same time. This might soon be implemented though, stay tuned.
 
 Theory
 ------
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 419e010dc..7803bdd0a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -417,6 +417,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index bb8125ef1..cd260bf89 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 49df589dd..fe95e1a2e 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -387,6 +387,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index f58fd8315..04a9060c2 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -410,6 +410,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 07af43647..5655219dd 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -415,6 +415,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 8a85e8e80..8e4a5ea7d 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -439,6 +439,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index ed964304f..1bde59441 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -409,6 +409,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index acd6d9f34..5a25872b0 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index bc0a000e0..a5ebffcdd 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 557b15fe2..c3566eb57 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -407,6 +407,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index e9158b041..c88fe8128 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -409,6 +409,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode

From d27c82a4500229abdf9a3d478b981f0315cfee21 Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Mon, 6 Apr 2015 23:03:06 +0200
Subject: [PATCH 8/9] Added check for Delta printers in Mesh, #error not yet
 supported.

---
 Marlin/Configuration.h                                       | 5 +++++
 Marlin/configurator/config/Configuration.h                   | 5 +++++
 Marlin/example_configurations/Felix/Configuration.h          | 5 +++++
 Marlin/example_configurations/Hephestos/Configuration.h      | 5 +++++
 Marlin/example_configurations/K8200/Configuration.h          | 5 +++++
 Marlin/example_configurations/SCARA/Configuration.h          | 5 +++++
 Marlin/example_configurations/WITBOX/Configuration.h         | 5 +++++
 Marlin/example_configurations/delta/generic/Configuration.h  | 5 +++++
 .../example_configurations/delta/kossel_mini/Configuration.h | 5 +++++
 Marlin/example_configurations/makibox/Configuration.h        | 5 +++++
 Marlin/example_configurations/tvrrug/Round2/Configuration.h  | 5 +++++
 11 files changed, 55 insertions(+)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7803bdd0a..a525894a4 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -399,6 +399,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index cd260bf89..fedea0d24 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -417,6 +417,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index fe95e1a2e..15546db88 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -369,6 +369,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 04a9060c2..a392e7f91 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -392,6 +392,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 5655219dd..3b16d3cab 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -397,6 +397,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 8e4a5ea7d..c35f4f21b 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -421,6 +421,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 1bde59441..9e4275785 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 5a25872b0..9a14554c6 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index a5ebffcdd..006d964a6 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index c3566eb57..6498eac59 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -389,6 +389,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index c88fe8128..20545496e 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10

From a9ed39b12dc37f71a39c36154bf9ec60bbb8ec1e Mon Sep 17 00:00:00 2001
From: Edward Patel <edward.patel@memention.com>
Date: Tue, 7 Apr 2015 22:58:08 +0200
Subject: [PATCH 9/9] Moved checks into SanityCheck.h + removed previous added
 checks.

---
 Marlin/Configuration.h                               |  9 ---------
 Marlin/SanityCheck.h                                 | 12 ++++++++++++
 Marlin/configurator/config/Configuration.h           |  9 ---------
 Marlin/example_configurations/Felix/Configuration.h  |  9 ---------
 .../example_configurations/Hephestos/Configuration.h |  9 ---------
 Marlin/example_configurations/K8200/Configuration.h  |  9 ---------
 Marlin/example_configurations/SCARA/Configuration.h  |  9 ---------
 Marlin/example_configurations/WITBOX/Configuration.h |  9 ---------
 .../delta/generic/Configuration.h                    |  9 ---------
 .../delta/kossel_mini/Configuration.h                |  9 ---------
 .../example_configurations/makibox/Configuration.h   |  9 ---------
 .../tvrrug/Round2/Configuration.h                    |  9 ---------
 12 files changed, 12 insertions(+), 99 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9234d2ce7..788ee58ff 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index d92938c1d..d1be7703d 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -91,6 +91,18 @@
     #error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller.
   #endif
 
+  /**
+   * Mesh Bed Leveling
+   */
+  #ifdef MESH_BED_LEVELING
+    #ifdef DELTA
+      #error MESH_BED_LEVELING does not yet support DELTA printers
+    #endif
+    #ifdef ENABLE_AUTO_BED_LEVELING
+      #error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both
+    #endif
+  #endif
+
   /**
    * Auto Bed Leveling
    */
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index 025bfea89..e5130531b 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 69b602502..9ed947254 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -369,11 +369,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -392,10 +387,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 39b1198d7..d320e9ea9 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -392,11 +392,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -415,10 +410,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 31e6f3f4b..fdbb32a86 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -397,11 +397,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -420,10 +415,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 283922edd..96e05e656 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -421,11 +421,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -444,10 +439,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index dd00a4bc8..2bbe50938 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index a757ff7ab..c5ab70da2 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 6ac4669ae..22f4f3f39 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 2b6834b61..fffc81c70 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -389,11 +389,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -412,10 +407,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 7f4867890..eb0e5a290 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode