Update pins_RURAMPS4D.h
Add and bugfix pins
This commit is contained in:
Vitaliy Sapyanov
Scott Lahteine
parent
9770062309
commit
e2724c68ab
@ -29,9 +29,7 @@
|
||||
*
|
||||
* Differences between
|
||||
* RADDS | RuRAMPS4DUE
|
||||
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
|
||||
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
|
||||
* A15 | NC
|
||||
* |
|
||||
*/
|
||||
|
||||
#ifndef __SAM3X8E__
|
||||
@ -39,16 +37,14 @@
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "RuRAMPS4Due"
|
||||
#define BOARD_NAME "RuRAMPS4Due"
|
||||
#endif
|
||||
#define RURAMPS4DUE // #1550 in boards.h
|
||||
|
||||
#undef INVERTED_HEATER_PINS
|
||||
#undef INVERTED_BED_PINS
|
||||
#undef INVERTED_FAN_PINS
|
||||
|
||||
#define I2C_EEPROM
|
||||
//#define SPI_EEPROM
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
@ -77,18 +73,18 @@
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 37
|
||||
#define X_STEP_PIN 37 // Support Extension Board
|
||||
#define X_DIR_PIN 36
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_CS_PIN -1
|
||||
|
||||
#define Y_STEP_PIN 32
|
||||
#define Y_STEP_PIN 32 // Support Extension Board
|
||||
#define Y_DIR_PIN 35
|
||||
#define Y_ENABLE_PIN 34
|
||||
#define Y_CS_PIN -1
|
||||
|
||||
#define Z_STEP_PIN 30
|
||||
#define Z_DIR_PIN 2
|
||||
#define Z_STEP_PIN 30 // Support Extension Board
|
||||
#define Z_DIR_PIN 2
|
||||
#define Z_ENABLE_PIN 33
|
||||
#define Z_CS_PIN -1
|
||||
|
||||
@ -102,48 +98,43 @@
|
||||
#define E1_ENABLE_PIN 26
|
||||
#define E1_CS_PIN -1
|
||||
|
||||
#define E2_STEP_PIN 25 //14 //sys0724
|
||||
#define E2_DIR_PIN 23 //15
|
||||
#define E2_ENABLE_PIN 27 //61
|
||||
#define E2_STEP_PIN 25
|
||||
#define E2_DIR_PIN 23
|
||||
#define E2_ENABLE_PIN 27
|
||||
#define E2_CS_PIN -1
|
||||
|
||||
// For Extension Board V2
|
||||
// http://doku.radds.org/dokumentation/extension-board
|
||||
//#define E3_STEP_PIN 35
|
||||
//#define E3_DIR_PIN 33
|
||||
//#define E3_ENABLE_PIN 37
|
||||
//#define E3_CS_PIN 6
|
||||
#define E3_STEP_PIN 15 // Only For Extension Board
|
||||
#define E3_DIR_PIN 14
|
||||
#define E3_ENABLE_PIN 61
|
||||
#define E3_CS_PIN -1
|
||||
|
||||
//#define Z2_STEP_PIN 29
|
||||
//#define Z2_DIR_PIN 27
|
||||
//#define Z2_ENABLE_PIN 31
|
||||
//#define Z2_CS_PIN 39
|
||||
|
||||
// Microstepping pins - Mapping not from fastio.h (?)
|
||||
//#define E3_MS1_PIN 67
|
||||
//#define E3_MS2_PIN 68
|
||||
//#define E3_MS3_PIN 69
|
||||
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
|
||||
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
|
||||
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
|
||||
// For Future: Microstepping pins - Mapping not from fastio.h (?)
|
||||
//#define E3_MS1_PIN ?
|
||||
//#define E3_MS2_PIN ?
|
||||
//#define E3_MS3_PIN ?
|
||||
//#define Z2_MS1_PIN ? // shared with E3_MS1_PIN
|
||||
//#define Z2_MS2_PIN ? // shared with E3_MS2_PIN
|
||||
//#define Z2_MS3_PIN ? // shared with E3_MS3_PIN
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// Limit Switches
|
||||
//
|
||||
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
|
||||
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
|
||||
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
|
||||
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
|
||||
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
|
||||
#define X_MIN_PIN 45
|
||||
#define X_MAX_PIN 39
|
||||
#define Y_MIN_PIN 46
|
||||
#define Y_MAX_PIN 41
|
||||
#define Z_MIN_PIN 47
|
||||
#define Z_MAX_PIN 43
|
||||
|
||||
/*
|
||||
// SPI for Max6675 or Max31855 Thermocouple
|
||||
#if DISABLED(SDSUPPORT)
|
||||
#define MAX6675_SS 53
|
||||
#else
|
||||
#define MAX6675_SS 49
|
||||
#if !ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
|
||||
#define Z_PROBE_PIN 49
|
||||
#endif // else Z_PROBE_PIN = Z_MIN_PIN
|
||||
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN Y_MIN_PIN
|
||||
#endif
|
||||
#endif
|
||||
*/
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
@ -151,18 +142,73 @@
|
||||
#define HEATER_0_PIN 13
|
||||
#define HEATER_1_PIN 12
|
||||
#define HEATER_2_PIN 11
|
||||
#define HEATER_BED_PIN 7 // BED H1
|
||||
#define HEATER_BED_PIN 7 // BED H1
|
||||
|
||||
#define FAN_PIN 9
|
||||
#define FAN1_PIN 8
|
||||
#define CONTROLLER_FAN_PIN -1
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 0 // ANALOG A0
|
||||
#define TEMP_1_PIN 1 // ANALOG A1
|
||||
#define TEMP_2_PIN 2 // ANALOG A2
|
||||
#define TEMP_3_PIN 3 // ANALOG A2
|
||||
#define TEMP_BED_PIN 4 // ANALOG A3
|
||||
//Thermocouple Use Analog Pins
|
||||
#if ENABLED(VER_WITH_THERMOCOUPLE) // If Nead, define is in Configuration.h
|
||||
#define TEMP_4_PIN 5 // A5
|
||||
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
|
||||
#endif
|
||||
|
||||
// SPI for Max6675 or Max31855 Thermocouple
|
||||
//#if DISABLED(SDSUPPORT)
|
||||
// #define MAX6675_SS 53
|
||||
//#else
|
||||
// #define MAX6675_SS 49
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 5
|
||||
#define SERVO1_PIN 3
|
||||
#define SERVO2_PIN -1
|
||||
#define SERVO3_PIN -1
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 4 // 4,10,52 if using HW SPI.
|
||||
#define LED_PIN 13
|
||||
#define SDSS 4 // 4,10,52 if using HW SPI.
|
||||
#define LED_PIN -1 // 13 - HEATER_0_PIN
|
||||
#define SDPOWER -1
|
||||
#define PS_ON_PIN -1 // 65
|
||||
#define KILL_PIN -1
|
||||
|
||||
//#define FIL_RUNOUT_PIN Y_MIN_PIN
|
||||
// MKS TFT / Nextion Use internal USART-1
|
||||
#define TFT_LCD_MODULE_COM 1
|
||||
#define TFT_LCD_MODULE_BAUDRATE 115600
|
||||
|
||||
// ESP WiFi Use internal USART-2
|
||||
#define ESP_WIFI_MODULE_COM 2
|
||||
#define ESP_WIFI_MODULE_BAUDRATE 115600
|
||||
#define ESP_WIFI_MODULE_RESET_PIN -1
|
||||
#define PIGGY_GPIO_PIN -1
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#define E2END 0x8000 // 32Kb (24lc256)
|
||||
#define I2C_EEPROM // EEPROM on I2C-0
|
||||
//#define EEPROM_SD // EEPROM on SDCARD
|
||||
//#define SPI_EEPROM // EEPROM on SPI-0
|
||||
//#define SPI_CHAN_EEPROM1 ?
|
||||
//#define SPI_EEPROM1_CS ?
|
||||
// 2K EEPROM
|
||||
//#define SPI_EEPROM2_CS ?
|
||||
// 32Mb FLASH
|
||||
//#define SPI_FLASH_CS ?
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
@ -186,39 +232,38 @@
|
||||
#define SD_DETECT_PIN 51
|
||||
|
||||
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define LCD_PINS_RS 52 //?
|
||||
#define LCD_PINS_ENABLE 53 //?
|
||||
#define LCD_PINS_D4 48 //?
|
||||
#define LCD_PINS_D5 50 //?
|
||||
#define LCD_PINS_D6 52 //?
|
||||
#define LCD_PINS_D7 53 //?
|
||||
#define LCD_PINS_RS 52
|
||||
#define LCD_PINS_ENABLE 53
|
||||
#define LCD_PINS_D4 48
|
||||
#define LCD_PINS_D5 50
|
||||
#define LCD_PINS_D6 52
|
||||
#define LCD_PINS_D7 53
|
||||
|
||||
#define BEEPER_PIN 62
|
||||
|
||||
#define BTN_EN1 44 //!
|
||||
#define BTN_EN2 42 //!
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define BTN_EN1 44
|
||||
#define BTN_EN2 42
|
||||
#define BTN_ENC 40
|
||||
#define SD_DETECT_PIN 51
|
||||
#endif
|
||||
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
|
||||
#define BTN_EN1 44
|
||||
#define BTN_EN2 42
|
||||
#define BTN_ENC 40
|
||||
#define BEEPER_PIN 62
|
||||
#define LCD_SDSS 10
|
||||
#define SD_DETECT_PIN 51
|
||||
|
||||
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
|
||||
|
||||
#define BTN_EN1 44 //?
|
||||
#define BTN_EN2 42 //?
|
||||
#define BTN_ENC 40 //?
|
||||
#define SD_DETECT_PIN 51 //?
|
||||
|
||||
#define BEEPER_PIN 62 //?
|
||||
#define LCD_SDSS 10 //?
|
||||
|
||||
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
|
||||
|
||||
#define LCD_PINS_D4 29
|
||||
#define LCD_PINS_ENABLE 27
|
||||
#define LCD_PINS_RS 25
|
||||
#define BTN_EN1 35
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 37
|
||||
|
||||
#elif ENABLED(SPARK_FULL_GRAPHICS)
|
||||
//http://doku.radds.org/dokumentation/other-electronics/sparklcd/
|
||||
#error "Oops! SPARK_FULL_GRAPHICS not supported with this board"
|
||||
//#define LCD_PINS_D4 29//?
|
||||
//#define LCD_PINS_ENABLE 27//?
|
||||
//#define LCD_PINS_RS 25//?
|
||||
//#define BTN_EN1 35//?
|
||||
//#define BTN_EN2 33//?
|
||||
//#define BTN_ENC 37//?
|
||||
#endif // SPARK_FULL_GRAPHICS
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
Loading…
Reference in New Issue
Block a user