HAL for Espressif ESP32 Wifi

This commit is contained in:
Simon Jouet 2017-10-08 17:38:10 +01:00 committed by Scott Lahteine
parent 091f742432
commit e2aeda61ed
23 changed files with 1257 additions and 16 deletions

View File

@ -1700,4 +1700,13 @@
// Default behaviour is limited to Z axis only. // Default behaviour is limited to Z axis only.
#endif #endif
/**
* WiFi Support (Espressif ESP32 WiFi)
*/
//#define WIFISUPPORT
#if ENABLED(WIFISUPPORT)
#define WIFI_SSID "Wifi SSID"
#define WIFI_PWD "Wifi Password"
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View File

@ -21,14 +21,12 @@
*/ */
/** /**
* Busy wait delay cycles routines:
Busy wait delay Cycles routines: *
* DELAY_CYCLES(count): Delay execution in cycles
DELAY_CYCLES(count): Delay execution in cycles * DELAY_NS(count): Delay execution in nanoseconds
DELAY_NS(count): Delay execution in nanoseconds * DELAY_US(count): Delay execution in microseconds
DELAY_US(count): Delay execution in microseconds */
*/
#ifndef MARLIN_DELAY_H #ifndef MARLIN_DELAY_H
#define MARLIN_DELAY_H #define MARLIN_DELAY_H
@ -37,7 +35,7 @@
#if defined(__arm__) || defined(__thumb__) #if defined(__arm__) || defined(__thumb__)
/* https://blueprints.launchpad.net/gcc-arm-embedded/+spec/delay-cycles */ // https://blueprints.launchpad.net/gcc-arm-embedded/+spec/delay-cycles
#define nop() __asm__ __volatile__("nop;\n\t":::) #define nop() __asm__ __volatile__("nop;\n\t":::)
@ -60,7 +58,7 @@
); );
} }
/* ---------------- Delay in cycles */ // Delay in cycles
FORCE_INLINE static void DELAY_CYCLES(uint32_t x) { FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
if (__builtin_constant_p(x)) { if (__builtin_constant_p(x)) {
@ -98,7 +96,7 @@
); );
} }
/* ---------------- Delay in cycles */ // Delay in cycles
FORCE_INLINE static void DELAY_CYCLES(uint16_t x) { FORCE_INLINE static void DELAY_CYCLES(uint16_t x) {
if (__builtin_constant_p(x)) { if (__builtin_constant_p(x)) {
@ -121,15 +119,30 @@
} }
#undef nop #undef nop
#elif defined(ESP32)
FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
unsigned long ccount, stop;
__asm__ __volatile__ ( "rsr %0, ccount" : "=a" (ccount) );
stop = ccount + x; // This can overflow
while (ccount < stop) { // This doesn't deal with overflows
__asm__ __volatile__ ( "rsr %0, ccount" : "=a" (ccount) );
}
}
#else #else
#error "Unsupported MCU architecture" #error "Unsupported MCU architecture"
#endif #endif
/* ---------------- Delay in nanoseconds */ // Delay in nanoseconds
#define DELAY_NS(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) / 1000L ) #define DELAY_NS(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) / 1000L )
/* ---------------- Delay in microseconds */ // Delay in microseconds
#define DELAY_US(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) ) #define DELAY_US(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) )
#endif // MARLIN_DELAY_H #endif // MARLIN_DELAY_H

View File

@ -0,0 +1,155 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "HAL.h"
#include <rom/rtc.h>
#include <driver/adc.h>
#include <esp_adc_cal.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
#include "ota.h"
#endif
// --------------------------------------------------------------------------
// Externals
// --------------------------------------------------------------------------
portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED;
// --------------------------------------------------------------------------
// Local defines
// --------------------------------------------------------------------------
#define V_REF 1100
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
uint16_t HAL_adc_result;
// --------------------------------------------------------------------------
// Private Variables
// --------------------------------------------------------------------------
esp_adc_cal_characteristics_t characteristics;
// --------------------------------------------------------------------------
// Function prototypes
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private functions
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void HAL_init(void) {
#if ENABLED(WIFISUPPORT)
OTA_init();
#endif
}
void HAL_idletask(void) {
#if ENABLED(WIFISUPPORT)
OTA_handle();
#endif
}
void HAL_clear_reset_source(void) { }
uint8_t HAL_get_reset_source (void) {
return rtc_get_reset_reason(1);
}
void _delay_ms(int delay_ms) {
delay(delay_ms);
}
// return free memory between end of heap (or end bss) and whatever is current
int freeMemory() {
return ESP.getFreeHeap();
}
// --------------------------------------------------------------------------
// ADC
// --------------------------------------------------------------------------
#define ADC1_CHANNEL(pin) ADC1_GPIO##pin_CHANNEL
adc1_channel_t get_channel(int pin) {
switch (pin) {
case 36: return ADC1_GPIO36_CHANNEL;
case 39: return ADC1_GPIO39_CHANNEL;
}
return ADC1_CHANNEL_MAX;
}
void HAL_adc_init() {
// Configure ADC
adc1_config_width(ADC_WIDTH_12Bit);
adc1_config_channel_atten(get_channel(36), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(39), ADC_ATTEN_11db);
// Calculate ADC characteristics i.e. gain and offset factors
esp_adc_cal_characterize(ADC_UNIT_1, ADC_ATTEN_DB_11, ADC_WIDTH_BIT_12, V_REF, &characteristics);
}
void HAL_adc_start_conversion (uint8_t adc_pin) {
uint32_t mv;
esp_adc_cal_get_voltage((adc_channel_t)get_channel(adc_pin), &characteristics, &mv);
HAL_adc_result = mv*1023.0/3300.0;
}
int pin_to_channel[40] = {};
int cnt_channel = 1;
void analogWrite(int pin, int value) {
if (pin_to_channel[pin] == 0) {
ledcAttachPin(pin, cnt_channel);
ledcSetup(cnt_channel, 490, 8);
ledcWrite(cnt_channel, value);
pin_to_channel[pin] = cnt_channel++;
}
ledcWrite(pin_to_channel[pin], value);
}
#endif // ARDUINO_ARCH_ESP32

View File

@ -0,0 +1,126 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* Description: HAL for Espressif ESP32 WiFi
*/
#ifndef _HAL_ESP32_H
#define _HAL_ESP32_H
#define CPU_32_BIT
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include <stdint.h>
#undef DISABLED
#undef _BV
#include <Arduino.h>
#undef DISABLED
#define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
#include "../math_32bit.h"
#include "../HAL_SPI.h"
#include "fastio_ESP32.h"
#include "watchdog_ESP32.h"
#include "HAL_timers_ESP32.h"
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
extern portMUX_TYPE spinlock;
#define NUM_SERIAL 1
#define MYSERIAL0 Serial
#define CRITICAL_SECTION_START portENTER_CRITICAL(&spinlock)
#define CRITICAL_SECTION_END portEXIT_CRITICAL(&spinlock)
#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
#define ENABLE_ISRS() if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
// Fix bug in pgm_read_ptr
#undef pgm_read_ptr
#define pgm_read_ptr(addr) (*(addr))
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef int16_t pin_t;
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
/** result of last ADC conversion */
extern uint16_t HAL_adc_result;
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
// clear reset reason
void HAL_clear_reset_source (void);
// reset reason
uint8_t HAL_get_reset_source (void);
void _delay_ms(int delay);
int freeMemory(void);
void analogWrite(int pin, int value);
// EEPROM
void eeprom_write_byte(unsigned char *pos, unsigned char value);
unsigned char eeprom_read_byte(unsigned char *pos);
void eeprom_read_block (void *__dst, const void *__src, size_t __n);
void eeprom_update_block (const void *__src, void *__dst, size_t __n);
// ADC
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_init(void);
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC HAL_adc_result
void HAL_adc_start_conversion (uint8_t adc_pin);
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
#define HAL_INIT 1
void HAL_idletask(void);
void HAL_init(void);
#endif // _HAL_ESP32_H

View File

@ -0,0 +1,109 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "HAL.h"
#include "../HAL_SPI.h"
#include "pins_arduino.h"
#include "spi_pins.h"
#include "../../core/macros.h"
#include <SPI.h>
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
static SPISettings spiConfig;
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Hardware SPI
// --------------------------------------------------------------------------
void spiBegin() {
#if !PIN_EXISTS(SS)
#error "SS_PIN not defined!"
#endif
WRITE(SS_PIN, HIGH);
SET_OUTPUT(SS_PIN);
}
void spiInit(uint8_t spiRate) {
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = SPI_CLOCK_DIV2 ; break;
case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4 ; break;
case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
uint8_t spiRec(void) {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transferBytes(0, buf, nbyte);
SPI.endTransaction();
}
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPI.transfer(token);
SPI.writeBytes(const_cast<uint8_t*>(buf), 512);
SPI.endTransaction();
}
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
SPI.beginTransaction(spiConfig);
}
#endif // ARDUINO_ARCH_ESP32

View File

@ -0,0 +1,202 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include <stdio.h>
#include "esp_types.h"
#include "soc/timer_group_struct.h"
#include "driver/periph_ctrl.h"
#include "driver/timer.h"
#include "HAL.h"
#include "HAL_timers_ESP32.h"
// --------------------------------------------------------------------------
// Externals
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Local defines
// --------------------------------------------------------------------------
#define NUM_HARDWARE_TIMERS 4
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private Variables
// --------------------------------------------------------------------------
static timg_dev_t *TG[2] = {&TIMERG0, &TIMERG1};
const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
{ TIMER_GROUP_0, TIMER_0, STEPPER_TIMER_PRESCALE, stepTC_Handler }, // 0 - Stepper
{ TIMER_GROUP_0, TIMER_1, TEMP_TIMER_PRESCALE, tempTC_Handler }, // 1 - Temperature
{ TIMER_GROUP_1, TIMER_0, 1, NULL }, // 2
{ TIMER_GROUP_1, TIMER_1, 1, NULL }, // 3
};
// --------------------------------------------------------------------------
// Function prototypes
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private functions
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void IRAM_ATTR timer_group0_isr(void *para) {
const int timer_idx = (int)para;
// Retrieve the interrupt status and the counter value
// from the timer that reported the interrupt
uint32_t intr_status = TIMERG0.int_st_timers.val;
TIMERG0.hw_timer[timer_idx].update = 1;
// Clear the interrupt
if (intr_status & BIT(timer_idx)) {
switch (timer_idx) {
case TIMER_0: TIMERG0.int_clr_timers.t0 = 1; break;
case TIMER_1: TIMERG0.int_clr_timers.t1 = 1; break;
}
}
const tTimerConfig timer = TimerConfig[timer_idx];
timer.fn();
// After the alarm has been triggered
// Enable it again so it gets triggered the next time
TIMERG0.hw_timer[timer_idx].config.alarm_en = TIMER_ALARM_EN;
}
/**
* Enable and initialize the timer
* @param timer_num timer number to initialize
* @param frequency frequency of the timer
*/
void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) {
const tTimerConfig timer = TimerConfig[timer_num];
timer_config_t config;
config.divider = STEPPER_TIMER_PRESCALE;
config.counter_dir = TIMER_COUNT_UP;
config.counter_en = TIMER_PAUSE;
config.alarm_en = TIMER_ALARM_EN;
config.intr_type = TIMER_INTR_LEVEL;
config.auto_reload = true;
// Select and initialize the timer
timer_init(timer.group, timer.idx, &config);
// Timer counter initial value and auto reload on alarm
timer_set_counter_value(timer.group, timer.idx, 0x00000000ULL);
// Configure the alam value and the interrupt on alarm
timer_set_alarm_value(timer.group, timer.idx, (HAL_TIMER_RATE) / timer.divider / frequency - 1);
timer_enable_intr(timer.group, timer.idx);
// TODO need to deal with timer_group1_isr
timer_isr_register(timer.group, timer.idx, timer_group0_isr, (void*)timer.idx, NULL, NULL);
timer_start(timer.group, timer.idx);
}
/**
* Set the upper value of the timer, when the timer reaches this upper value the
* interrupt should be triggered and the counter reset
* @param timer_num timer number to set the count to
* @param count threshold at which the interrupt is triggered
*/
void HAL_timer_set_compare(const uint8_t timer_num, hal_timer_t count) {
const tTimerConfig timer = TimerConfig[timer_num];
timer_set_alarm_value(timer.group, timer.idx, count);
}
/**
* Get the current upper value of the timer
* @param timer_num timer number to get the count from
* @return the timer current threshold for the alarm to be triggered
*/
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
uint64_t alarm_value;
timer_get_alarm_value(timer.group, timer.idx, &alarm_value);
return alarm_value;
}
/**
* Get the current counter value between 0 and the maximum count (HAL_timer_set_count)
* @param timer_num timer number to get the current count
* @return the current counter of the alarm
*/
hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
uint64_t counter_value;
timer_get_counter_value(timer.group, timer.idx, &counter_value);
return counter_value;
}
/**
* Enable timer interrupt on the timer
* @param timer_num timer number to enable interrupts on
*/
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
//timer_enable_intr(timer.group, timer.idx);
}
/**
* Disable timer interrupt on the timer
* @param timer_num timer number to disable interrupts on
*/
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
// timer_disable_intr(timer.group, timer.idx);
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
return TG[timer.group]->int_ena.val | BIT(timer_num);
}
#endif // ARDUINO_ARCH_ESP32

View File

@ -0,0 +1,114 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _HAL_TIMERS_ESP32_H
#define _HAL_TIMERS_ESP32_H
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include <stdint.h>
#include "driver/timer.h"
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
//
#define FORCE_INLINE __attribute__((always_inline)) inline
typedef uint64_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFFULL
#define STEP_TIMER_NUM 0 // index of timer to use for stepper
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define HAL_TIMER_RATE APB_CLK_FREQ // frequency of timer peripherals
#define STEPPER_TIMER_PRESCALE 40
#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer, 2MHz
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
#define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts
#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#define HAL_TEMP_TIMER_ISR extern "C" void tempTC_Handler(void)
#define HAL_STEP_TIMER_ISR extern "C" void stepTC_Handler(void)
extern "C" void tempTC_Handler(void);
extern "C" void stepTC_Handler(void);
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef struct {
timer_group_t group;
timer_idx_t idx;
uint32_t divider;
void (*fn)(void);
} tTimerConfig;
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
extern const tTimerConfig TimerConfig[];
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void HAL_timer_start (const uint8_t timer_num, uint32_t frequency);
void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t count);
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num);
hal_timer_t HAL_timer_get_count(const uint8_t timer_num);
// if counter too high then bump up compare
FORCE_INLINE static void HAL_timer_restrain(const uint8_t timer_num, const uint16_t interval_ticks) {
const hal_timer_t mincmp = HAL_timer_get_count(timer_num) + interval_ticks;
if (HAL_timer_get_compare(timer_num) < mincmp) HAL_timer_set_compare(timer_num, mincmp);
}
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
#endif // _HAL_TIMERS_ESP32_H

View File

@ -0,0 +1,25 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue."
#endif

View File

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the stepper-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#ifndef _ENDSTOP_INTERRUPTS_H_
#define _ENDSTOP_INTERRUPTS_H_
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void ICACHE_RAM_ATTR endstop_ISR(void) {
endstops.check_possible_change();
}
void setup_endstop_interrupts(void) {
#if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
#endif
}
#endif //_ENDSTOP_INTERRUPTS_H_

View File

@ -0,0 +1,72 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef _FASTIO_ESP32_H
#define _FASTIO_ESP32_H
/**
* Utility functions
*/
// set pin as input
#define _SET_INPUT(IO) pinMode(IO, INPUT)
// set pin as output
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT)
// set pin as input with pullup mode
#define _PULLUP(IO, v) pinMode(IO, v ? INPUT_PULLUP : INPUT)
// Read a pin wrapper
#define READ(IO) digitalRead(IO)
// Write to a pin wrapper
#define WRITE(IO, v) digitalWrite(IO, v)
// set pin as input wrapper
#define SET_INPUT(IO) _SET_INPUT(IO)
// set pin as input with pullup wrapper
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
// set pin as output wrapper
#define SET_OUTPUT(IO) do{ _SET_OUTPUT(IO); WRITE(IO, LOW); }while(0)
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
//
// ports and functions
//
// UART
#define RXD 3
#define TXD 1
// TWI (I2C)
#define SCL 5
#define SDA 4
//
// pins
//
#endif // _FASTIO_ESP32_H

View File

@ -0,0 +1,81 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
#include <WiFi.h>
#include <ESPmDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include "driver/timer.h"
void OTA_init() {
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PWD);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
Serial.println("Connection Failed! Rebooting...");
delay(5000);
ESP.restart();
}
ArduinoOTA
.onStart([]() {
timer_pause(TIMER_GROUP_0, TIMER_0);
timer_pause(TIMER_GROUP_0, TIMER_1);
// U_FLASH or U_SPIFFS
String type = (ArduinoOTA.getCommand() == U_FLASH) ? "sketch" : "filesystem";
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
Serial.println("Start updating " + type);
})
.onEnd([]() {
Serial.println("\nEnd");
})
.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
})
.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
char *str;
switch (error) {
case OTA_AUTH_ERROR: str = "Auth Failed"; break;
case OTA_BEGIN_ERROR: str = "Begin Failed"; break;
case OTA_CONNECT_ERROR: str = "Connect Failed"; break;
case OTA_RECEIVE_ERROR: str = "Receive Failed"; break;
case OTA_END_ERROR: str = "End Failed"; break;
}
Serial.println(str);
});
ArduinoOTA.begin();
}
void OTA_handle() {
ArduinoOTA.handle();
}
#endif // WIFISUPPORT
#endif // ARDUINO_ARCH_ESP32

View File

@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _HAL_OTA_H
#define _HAL_OTA_H
void OTA_init();
void OTA_handle();
#endif

View File

@ -0,0 +1,21 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/

View File

@ -0,0 +1,28 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef SPI_PINS_H_
#define SPI_PINS_H_
#define SS_PIN 5
#define SCK_PIN 18
#define MISO_PIN 19
#define MOSI_PIN 23
#endif // SPI_PINS_H_

View File

@ -0,0 +1,41 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog_ESP32.h"
void watchdogSetup(void) {
// do whatever. don't remove this function.
}
void watchdog_init(void) {
// TODO
}
#endif // USE_WATCHDOG
#endif // ARDUINO_ARCH_ESP32

View File

@ -0,0 +1,32 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef WATCHDOG_ESP32_H
#define WATCHDOG_ESP32_H
// Initialize watchdog with a 4 second interrupt time
void watchdog_init();
// Reset watchdog.
inline void watchdog_reset() {};
#endif // WATCHDOG_ESP32_H

View File

@ -17,6 +17,8 @@
#define HAL_PLATFORM HAL_STM32F4 #define HAL_PLATFORM HAL_STM32F4
#elif defined(STM32F7) #elif defined(STM32F7)
#define HAL_PLATFORM HAL_STM32F7 #define HAL_PLATFORM HAL_STM32F7
#elif defined(ARDUINO_ARCH_ESP32)
#define HAL_PLATFORM HAL_ESP32
#else #else
#error "Unsupported Platform!" #error "Unsupported Platform!"
#endif #endif

View File

@ -702,10 +702,10 @@ void setup() {
#if NUM_SERIAL > 0 #if NUM_SERIAL > 0
uint32_t serial_connect_timeout = millis() + 1000UL; uint32_t serial_connect_timeout = millis() + 1000UL;
while(!MYSERIAL0 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ } while (!MYSERIAL0 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#if NUM_SERIAL > 1 #if NUM_SERIAL > 1
serial_connect_timeout = millis() + 1000UL; serial_connect_timeout = millis() + 1000UL;
while(!MYSERIAL1 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ } while (!MYSERIAL1 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif #endif
#endif #endif

View File

@ -1700,4 +1700,13 @@
// Default behaviour is limited to Z axis only. // Default behaviour is limited to Z axis only.
#endif #endif
/**
* WiFi Support (Espressif ESP32 WiFi)
*/
//#define WIFISUPPORT
#if ENABLED(WIFISUPPORT)
#define WIFI_SSID "Wifi SSID"
#define WIFI_PWD "Wifi Password"
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View File

@ -225,6 +225,10 @@
#define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan) #define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan)
//
// Espressif ESP32 WiFi
//
#define BOARD_ESP32 1900
#define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board) #define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)

View File

@ -381,6 +381,13 @@
#elif MB(THE_BORG) #elif MB(THE_BORG)
#include "pins_THE_BORG.h" // STM32F7 env:STM32F7 #include "pins_THE_BORG.h" // STM32F7 env:STM32F7
//
// Espressif ESP32
//
#elif MB(ESP32)
#include "pins_ESP32.h"
#else #else
#error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h"
#endif #endif

View File

@ -0,0 +1,72 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Espressif ESP32 (Tensilica Xtensa LX6) pin assignments
*/
#ifndef BOARD_NAME
#define BOARD_NAME "Espressif ESP32"
#endif
//
// Limit Switches
//
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 15
//
// Steppers
//
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 0
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 13
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4

View File

@ -318,3 +318,19 @@ lib_ignore =
U8glib-HAL U8glib-HAL
TMC2208Stepper TMC2208Stepper
c1921b4 c1921b4
#
# Espressif ESP32
#
[env:esp32]
platform = https://github.com/platformio/platform-espressif32.git#feature/stage
board = esp32dev
framework = arduino
upload_port = COM3
lib_ignore =
LiquidCrystal_I2C
LiquidCrystal
NewliquidCrystal
LiquidTWI2
TMC26XStepper
c1921b4