Remove debug output from flash persistent store implementation
This commit is contained in:
parent
42fb7c14b0
commit
e5b4bf22d4
@ -69,20 +69,15 @@ bool PersistentStore::access_start() {
|
|||||||
__disable_irq();
|
__disable_irq();
|
||||||
status = BlankCheckSector(EEPROM_SECTOR, EEPROM_SECTOR, &first_nblank_loc, &first_nblank_val);
|
status = BlankCheckSector(EEPROM_SECTOR, EEPROM_SECTOR, &first_nblank_loc, &first_nblank_val);
|
||||||
__enable_irq();
|
__enable_irq();
|
||||||
SERIAL_PROTOCOLLNPAIR("Blank check status: ", status);
|
|
||||||
if (status == CMD_SUCCESS) {
|
if (status == CMD_SUCCESS) {
|
||||||
// sector is blank so nothing stored yet
|
// sector is blank so nothing stored yet
|
||||||
SERIAL_PROTOCOLLNPGM("FLASH empty");
|
|
||||||
for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = EEPROM_ERASE;
|
for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = EEPROM_ERASE;
|
||||||
current_slot = EEPROM_SLOTS;
|
current_slot = EEPROM_SLOTS;
|
||||||
}
|
} else {
|
||||||
else {
|
|
||||||
// current slot is the first non blank one
|
// current slot is the first non blank one
|
||||||
current_slot = first_nblank_loc / EEPROM_SIZE;
|
current_slot = first_nblank_loc / EEPROM_SIZE;
|
||||||
SERIAL_PROTOCOLLNPAIR("Flash slot: ", current_slot);
|
|
||||||
uint8_t *eeprom_data = SLOT_ADDRESS(EEPROM_SECTOR, current_slot);
|
uint8_t *eeprom_data = SLOT_ADDRESS(EEPROM_SECTOR, current_slot);
|
||||||
SERIAL_PROTOCOLLNPAIR("Address: ", (int)eeprom_data);
|
|
||||||
|
|
||||||
// load current settings
|
// load current settings
|
||||||
for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
|
for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
|
||||||
}
|
}
|
||||||
@ -100,15 +95,15 @@ bool PersistentStore::access_finish() {
|
|||||||
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||||
status = EraseSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
status = EraseSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||||
__enable_irq();
|
__enable_irq();
|
||||||
SERIAL_PROTOCOLLNPAIR("Erase status: ", status);
|
|
||||||
current_slot = EEPROM_SLOTS - 1;
|
current_slot = EEPROM_SLOTS - 1;
|
||||||
}
|
}
|
||||||
SERIAL_PROTOCOLLNPAIR("Writing data to: ", current_slot);
|
|
||||||
__disable_irq();
|
__disable_irq();
|
||||||
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||||
status = CopyRAM2Flash(SLOT_ADDRESS(EEPROM_SECTOR, current_slot), ram_eeprom, IAP_WRITE_4096);
|
status = CopyRAM2Flash(SLOT_ADDRESS(EEPROM_SECTOR, current_slot), ram_eeprom, IAP_WRITE_4096);
|
||||||
__enable_irq();
|
__enable_irq();
|
||||||
SERIAL_PROTOCOLLNPAIR("CopyRAM2Flash status: ", status);
|
|
||||||
if (status != CMD_SUCCESS) return false;
|
if (status != CMD_SUCCESS) return false;
|
||||||
eeprom_dirty = false;
|
eeprom_dirty = false;
|
||||||
}
|
}
|
||||||
|
Loading…
Reference in New Issue
Block a user