diff --git a/Marlin/language.h b/Marlin/language.h index 0f245769b..9ab5df73e 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -73,79 +73,81 @@ // Serial Console Messages (do not translate those!) -#define MSG_Enqueing "enqueing \"" -#define MSG_POWERUP "PowerUp" -#define MSG_EXTERNAL_RESET " External Reset" -#define MSG_BROWNOUT_RESET " Brown out Reset" -#define MSG_WATCHDOG_RESET " Watchdog Reset" -#define MSG_SOFTWARE_RESET " Software Reset" -#define MSG_AUTHOR " | Author: " -#define MSG_CONFIGURATION_VER " Last Updated: " -#define MSG_FREE_MEMORY " Free Memory: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Done saving file." -#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " -#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " -#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " +#define MSG_Enqueing "enqueing \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " External Reset" +#define MSG_BROWNOUT_RESET " Brown out Reset" +#define MSG_WATCHDOG_RESET " Watchdog Reset" +#define MSG_SOFTWARE_RESET " Software Reset" +#define MSG_AUTHOR " | Author: " +#define MSG_CONFIGURATION_VER " Last Updated: " +#define MSG_FREE_MEMORY " Free Memory: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Done saving file." +#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " +#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " +#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " -#define MSG_FILE_PRINTED "Done printing file" -#define MSG_BEGIN_FILE_LIST "Begin file list" -#define MSG_END_FILE_LIST "End file list" -#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " -#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " -#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " -#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " -#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " -#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" -#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " -#define MSG_HEATING "Heating..." -#define MSG_HEATING_COMPLETE "Heating done." -#define MSG_BED_HEATING "Bed Heating." -#define MSG_BED_DONE "Bed done." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" -#define MSG_COUNT_X " Count X: " -#define MSG_ERR_KILLED "Printer halted. kill() called!" -#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" -#define MSG_RESEND "Resend: " -#define MSG_UNKNOWN_COMMAND "Unknown command: \"" -#define MSG_ACTIVE_EXTRUDER "Active Extruder: " -#define MSG_INVALID_EXTRUDER "Invalid extruder" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Reporting endstop status" -#define MSG_ENDSTOP_HIT "TRIGGERED" -#define MSG_ENDSTOP_OPEN "open" -#define MSG_HOTEND_OFFSET "Hotend offsets:" +#define MSG_FILE_PRINTED "Done printing file" +#define MSG_BEGIN_FILE_LIST "Begin file list" +#define MSG_END_FILE_LIST "End file list" +#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " +#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " +#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " +#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " +#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " +#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" +#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " +#define MSG_HEATING "Heating..." +#define MSG_HEATING_COMPLETE "Heating done." +#define MSG_BED_HEATING "Bed Heating." +#define MSG_BED_DONE "Bed done." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" +#define MSG_COUNT_X " Count X: " +#define MSG_ERR_KILLED "Printer halted. kill() called!" +#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" +#define MSG_RESEND "Resend: " +#define MSG_UNKNOWN_COMMAND "Unknown command: \"" +#define MSG_ACTIVE_EXTRUDER "Active Extruder: " +#define MSG_INVALID_EXTRUDER "Invalid extruder" +#define MSG_X_MIN "x_min: " +#define MSG_X_MAX "x_max: " +#define MSG_Y_MIN "y_min: " +#define MSG_Y_MAX "y_max: " +#define MSG_Z_MIN "z_min: " +#define MSG_Z_MAX "z_max: " +#define MSG_M119_REPORT "Reporting endstop status" +#define MSG_ENDSTOP_HIT "TRIGGERED" +#define MSG_ENDSTOP_OPEN "open" +#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" -#define MSG_SD_INIT_FAIL "SD init fail" -#define MSG_SD_VOL_INIT_FAIL "volume.init failed" -#define MSG_SD_OPENROOT_FAIL "openRoot failed" -#define MSG_SD_CARD_OK "SD card ok" -#define MSG_SD_WORKDIR_FAIL "workDir open failed" -#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " -#define MSG_SD_FILE_OPENED "File opened: " -#define MSG_SD_SIZE " Size: " -#define MSG_SD_FILE_SELECTED "File selected" -#define MSG_SD_WRITE_TO_FILE "Writing to file: " -#define MSG_SD_PRINTING_BYTE "SD printing byte " -#define MSG_SD_NOT_PRINTING "Not SD printing" -#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" -#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " +#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" +#define MSG_SD_INIT_FAIL "SD init fail" +#define MSG_SD_VOL_INIT_FAIL "volume.init failed" +#define MSG_SD_OPENROOT_FAIL "openRoot failed" +#define MSG_SD_CARD_OK "SD card ok" +#define MSG_SD_WORKDIR_FAIL "workDir open failed" +#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " +#define MSG_SD_FILE_OPENED "File opened: " +#define MSG_SD_SIZE " Size: " +#define MSG_SD_FILE_SELECTED "File selected" +#define MSG_SD_WRITE_TO_FILE "Writing to file: " +#define MSG_SD_PRINTING_BYTE "SD printing byte " +#define MSG_SD_NOT_PRINTING "Not SD printing" +#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" +#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " -#define MSG_STEPPER_TOO_HIGH "Steprate too high: " -#define MSG_ENDSTOPS_HIT "endstops hit: " -#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" -#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" -#define MSG_BABYSTEPPING_X "Babystepping X" -#define MSG_BABYSTEPPING_Y "Babystepping Y" -#define MSG_BABYSTEPPING_Z "Babystepping Z" -#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" +#define MSG_STEPPER_TOO_HIGH "Steprate too high: " +#define MSG_ENDSTOPS_HIT "endstops hit: " +#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" +#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" +#define MSG_BABYSTEPPING_X "Babystepping X" +#define MSG_BABYSTEPPING_Y "Babystepping Y" +#define MSG_BABYSTEPPING_Z "Babystepping Z" +#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" + +// LCD Menu Messages #if LANGUAGE_CHOICE == en // English #include "language_en.h" @@ -175,4 +177,4 @@ #include "language_eu.h" #endif -#endif // ifndef LANGUAGE_H +#endif //__LANGUAGE_H diff --git a/Marlin/language_an.h b/Marlin/language_an.h index 3bfd23d00..8c6820e1a 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -1,9 +1,13 @@ +/** + * Aragonese + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_AN_H #define LANGUAGE_AN_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " parada." #define MSG_SD_INSERTED "Tarcheta colocada" #define MSG_SD_REMOVED "Tarcheta retirada" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Y trangos/mm" #define MSG_ZSTEPS "Z trangos/mm" #define MSG_ESTEPS "E trangos/mm" -#define MSG_RECTRACT "Retraer" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_CONTRAST "Contrast" @@ -122,14 +125,15 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_RECTRACT "Retraer" #define MSG_RECTRACT_WIDE "Retraer" #define MSG_TEMPERATURE_WIDE "Temperatura" #define MSG_TEMPERATURE_RTN "Temperatura" #define MSG_MAIN_WIDE "Menu Prencipal" #define MSG_MOTION_WIDE "Movimiento" #define MSG_PREPARE_ALT "Preparar" -#define MSG_CONTROL_ARROW "Control" -#define MSG_RETRACT_ARROW "Retraer" +#define MSG_CONTROL_ARROW "Control \x7E" +#define MSG_RETRACT_ARROW "Retraer \x7E" #define MSG_STEPPER_RELEASED "Desacoplada." #endif // LANGUAGE_AN_H diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index 3bda222c9..680c6eed0 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -1,9 +1,13 @@ +/** + * Catalan + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_CA_H #define LANGUAGE_CA_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " preparada." #define MSG_SD_INSERTED "SD detectada." #define MSG_SD_REMOVED "SD expulsada." @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ypassos/mm" #define MSG_ZSTEPS "Zpassos/mm" #define MSG_ESTEPS "Epassos/mm" -#define MSG_RECTRACT "Retreure" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Moviment" #define MSG_CONTRAST "Contrast de LCD" @@ -122,4 +125,6 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_RECTRACT "Retreure" + #endif // LANGUAGE_CA_H diff --git a/Marlin/language_de.h b/Marlin/language_de.h index 43861c1af..801250b51 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -1,9 +1,13 @@ +/** + * German + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " Bereit." #define MSG_SD_INSERTED "SDKarte erkannt" #define MSG_SD_REMOVED "SDKarte entfernt" @@ -80,8 +84,6 @@ #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" -#define MSG_RECTRACT_WIDE "Rectract" -#define MSG_WATCH "Beobachten" #define MSG_TEMPERATURE "Temperatur" #define MSG_MOTION "Bewegung" #define MSG_CONTRAST "LCD contrast" @@ -89,8 +91,8 @@ #define MSG_LOAD_EPROM "EPROM laden" #define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_REFRESH "Aktualisieren" +#define MSG_WATCH "Beobachten" #define MSG_PREPARE "Vorbereitung" -#define MSG_CONTROL "Einstellungen" #define MSG_TUNE "Justierung" #define MSG_PAUSE_PRINT "Druck anhalten" #define MSG_RESUME_PRINT "Druck fortsetz" @@ -104,7 +106,6 @@ #define MSG_NO_MOVE "Kein Zug." #define MSG_KILLED "KILLED" #define MSG_STOPPED "GESTOPPT" -#define MSG_STEPPER_RELEASED "Stepper frei" #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm" #define MSG_CONTROL_RETRACTF "Retract V" @@ -123,6 +124,8 @@ #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_CONTRAST "Contrast" + +#define MSG_STEPPER_RELEASED "Stepper frei" +#define MSG_RECTRACT_WIDE "Rectract" #endif // LANGUAGE_DE_H diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 5da470839..c094ff641 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -1,8 +1,12 @@ -#ifndef LANGUAGE_CA_H -#define LANGUAGE_CA_H - -// LCD Menu Messages -// Please note these are limited to 17 characters! +/** + * English + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ +#ifndef LANGUAGE_EN_H +#define LANGUAGE_EN_H #define WELCOME_MSG MACHINE_NAME " ready." #define MSG_SD_INSERTED "Card inserted" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" -#define MSG_RECTRACT "Rectract" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Motion" #define MSG_CONTRAST "LCD contrast" @@ -122,4 +125,6 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#endif // LANGUAGE_CA_H +#define MSG_RECTRACT "Rectract" + +#endif // LANGUAGE_EN_H diff --git a/Marlin/language_es.h b/Marlin/language_es.h index 1989a759d..eff9d6a8a 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -1,9 +1,13 @@ +/** + * Spanish + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_ES_H #define LANGUAGE_ES_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " lista." #define MSG_SD_INSERTED "Tarjeta colocada" #define MSG_SD_REMOVED "Tarjeta retirada" @@ -80,9 +84,9 @@ #define MSG_YSTEPS "Y pasos/mm" #define MSG_ZSTEPS "Z pasos/mm" #define MSG_ESTEPS "E pasos/mm" -#define MSG_RECTRACT "Retraer" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" +#define MSG_CONTRAST "Contraste" #define MSG_STORE_EPROM "Guardar memoria" #define MSG_LOAD_EPROM "Cargar memoria" #define MSG_RESTORE_FAILSAFE "Rest. de emergen." @@ -113,15 +117,6 @@ #define MSG_FILAMENTCHANGE "Cambiar filamento" #define MSG_INIT_SDCARD "Iniciando tarjeta" #define MSG_CNG_SDCARD "Cambiar tarjeta" -#define MSG_RECTRACT_WIDE "Retraer" -#define MSG_TEMPERATURE_WIDE "Temperatura" -#define MSG_TEMPERATURE_RTN "Temperatura" -#define MSG_MAIN_WIDE "Menu principal" -#define MSG_MOTION_WIDE "Movimiento" -#define MSG_PREPARE_ALT "Preparar" -#define MSG_CONTROL_ARROW "Control" -#define MSG_RETRACT_ARROW "Retraer" -#define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_ZPROBE_OUT "sonda Z fuera" #define MSG_POSITION_UNKNOWN "Reiniciar X/Y y Z" #define MSG_ZPROBE_ZOFFSET "Offset Z" @@ -129,6 +124,16 @@ #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_CONTRAST "Contraste" + +#define MSG_RECTRACT "Retraer" +#define MSG_RECTRACT_WIDE "Retraer" +#define MSG_TEMPERATURE_WIDE "Temperatura" +#define MSG_TEMPERATURE_RTN "Temperatura" +#define MSG_MAIN_WIDE "Menu principal" +#define MSG_MOTION_WIDE "Movimiento" +#define MSG_PREPARE_ALT "Preparar" +#define MSG_CONTROL_ARROW "Control \x7E" +#define MSG_RETRACT_ARROW "Retraer \x7E" +#define MSG_STEPPER_RELEASED "Desacoplada." #endif // LANGUAGE_ES_H diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 5fad486f9..4b31b6567 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -1,9 +1,13 @@ +/** + * Basque-Euskera + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_EU_H #define LANGUAGE_EU_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " prest." #define MSG_SD_INSERTED "Txartela sartuta" #define MSG_SD_REMOVED "Txartela kenduta" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Y pausoak/mm" #define MSG_ZSTEPS "Z pausoak/mm" #define MSG_ESTEPS "E pausoak/mm" -#define MSG_RECTRACT "Atzera eragin" #define MSG_TEMPERATURE "Tenperatura" #define MSG_MOTION "Mugimendua" #define MSG_CONTRAST "LCD kontrastea" @@ -122,4 +125,6 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop deuseztat" +#define MSG_RECTRACT "Atzera eragin" + #endif // LANGUAGE_EU_H diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index 97ca7d7c2..b88c3759a 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -1,9 +1,13 @@ +/** + * Finnish + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_FI_H #define LANGUAGE_FI_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " valmis." #define MSG_SD_INSERTED "Kortti asetettu" #define MSG_SD_REMOVED "Kortti poistettu" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" -#define MSG_RECTRACT "Veda takaisin" #define MSG_TEMPERATURE "Lampotila" #define MSG_MOTION "Liike" #define MSG_CONTRAST "LCD contrast" @@ -122,4 +125,6 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_RECTRACT "Veda takaisin" + #endif // LANGUAGE_FI_H diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index 619a048ce..ffcfeb481 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -1,128 +1,131 @@ +/** + * French + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_FR_H #define LANGUAGE_FR_H -// LCD Menu Messages -// Please note these are limited to 17 characters! +#define WELCOME_MSG MACHINE_NAME " prete." +#define MSG_SD_INSERTED "Carte inseree" +#define MSG_SD_REMOVED "Carte retiree" +#define MSG_MAIN "Menu principal" +#define MSG_AUTOSTART "Demarrage auto" +#define MSG_DISABLE_STEPPERS "Arreter moteurs" +#define MSG_AUTO_HOME "Home auto." +#define MSG_SET_HOME_OFFSETS "Set home offsets" +#define MSG_SET_ORIGIN "Regler origine" +#define MSG_PREHEAT_PLA "Prechauffage PLA" +#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1" +#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2" +#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3" +#define MSG_PREHEAT_PLA012 "Prech. PLA Tout" +#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau" +#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA" +#define MSG_PREHEAT_ABS "Prechauffage ABS" +#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1" +#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2" +#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3" +#define MSG_PREHEAT_ABS012 "Prech. ABS Tout" +#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau" +#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS" +#define MSG_COOLDOWN "Refroidir" +#define MSG_SWITCH_PS_ON "Allumer alim." +#define MSG_SWITCH_PS_OFF "Eteindre alim." +#define MSG_EXTRUDE "Extrusion" +#define MSG_RETRACT "Retraction" +#define MSG_MOVE_AXIS "Deplacer un axe" +#define MSG_MOVE_X "Move X" +#define MSG_MOVE_Y "Move Y" +#define MSG_MOVE_Z "Move Z" +#define MSG_MOVE_E "Extruder" +#define MSG_MOVE_E1 "Extruder2" +#define MSG_MOVE_E2 "Extruder3" +#define MSG_MOVE_01MM "Move 0.1mm" +#define MSG_MOVE_1MM "Move 1mm" +#define MSG_MOVE_10MM "Move 10mm" +#define MSG_SPEED " Vitesse" +#define MSG_NOZZLE "Buse" +#define MSG_NOZZLE1 "Buse2" +#define MSG_NOZZLE2 "Buse3" +#define MSG_BED "Plateau" +#define MSG_FAN_SPEED "Vite. ventilateur" +#define MSG_FLOW "Flux" +#define MSG_FLOW0 "Flux 0" +#define MSG_FLOW1 "Flux 1" +#define MSG_FLOW2 "Flux 2" +#define MSG_CONTROL "Controler" +#define MSG_MIN " \002 Min" +#define MSG_MAX " \002 Max" +#define MSG_FACTOR " \002 Facteur" +#define MSG_AUTOTEMP "Temp. Auto." +#define MSG_ON "Marche " +#define MSG_OFF "Arret" +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Accel" +#define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VZ_JERK "Vz-jerk" +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX "Vmax" +#define MSG_X "x" +#define MSG_Y "y" +#define MSG_Z "z" +#define MSG_E "e" +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "Vdepl min" +#define MSG_AMAX "Amax " +#define MSG_A_RETRACT "A-retract" +#define MSG_XSTEPS "Xpas/mm" +#define MSG_YSTEPS "Ypas/mm" +#define MSG_ZSTEPS "Zpas/mm" +#define MSG_ESTEPS "Epas/mm" +#define MSG_TEMPERATURE "Temperature" +#define MSG_MOTION "Mouvement" +#define MSG_CONTRAST "Contraste LCD" +#define MSG_STORE_EPROM "Sauver config" +#define MSG_LOAD_EPROM "Lire config" +#define MSG_RESTORE_FAILSAFE "Restaurer defauts" +#define MSG_REFRESH "Actualiser" +#define MSG_WATCH "Surveiller" +#define MSG_PREPARE "Preparer" +#define MSG_TUNE "Regler" +#define MSG_PAUSE_PRINT "Interrompre impr." +#define MSG_RESUME_PRINT "Reprendre impr." +#define MSG_STOP_PRINT "Arreter impr." +#define MSG_CARD_MENU "Impr. depuis SD" +#define MSG_NO_CARD "Pas de carte" +#define MSG_DWELL "Repos..." +#define MSG_USERWAIT "Atten. de l'util." +#define MSG_RESUMING "Repri. de l'impr." +#define MSG_PRINT_ABORTED "Print aborted" +#define MSG_NO_MOVE "Aucun mouvement." +#define MSG_KILLED "MORT." +#define MSG_STOPPED "STOPPE." +#define MSG_CONTROL_RETRACT "Retraction mm" +#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm" +#define MSG_CONTROL_RETRACTF "Retraction V" +#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" +#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm" +#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" +#define MSG_AUTORETRACT "Retract. Auto." +#define MSG_FILAMENTCHANGE "Changer filament" +#define MSG_INIT_SDCARD "Init. la carte SD" +#define MSG_CNG_SDCARD "Changer de carte" +#define MSG_ZPROBE_OUT "Z sonde exte. lit" +#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z" +#define MSG_ZPROBE_ZOFFSET "Offset Z" +#define MSG_BABYSTEP_X "Babystep X" +#define MSG_BABYSTEP_Y "Babystep Y" +#define MSG_BABYSTEP_Z "Babystep Z" +#define MSG_ENDSTOP_ABORT "Butee abandon" -#define WELCOME_MSG MACHINE_NAME " prete." -#define MSG_SD_INSERTED "Carte inseree" -#define MSG_SD_REMOVED "Carte retiree" -#define MSG_MAIN "Menu principal" -#define MSG_AUTOSTART "Demarrage auto" -#define MSG_DISABLE_STEPPERS "Arreter moteurs" -#define MSG_AUTO_HOME "Home auto." -#define MSG_SET_HOME_OFFSETS "Set home offsets" -#define MSG_SET_ORIGIN "Regler origine" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1" -#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2" -#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3" -#define MSG_PREHEAT_PLA012 "Prech. PLA Tout" -#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau" -#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA" -#define MSG_PREHEAT_ABS "Prechauffage ABS" -#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1" -#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2" -#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3" -#define MSG_PREHEAT_ABS012 "Prech. ABS Tout" -#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau" -#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS" -#define MSG_COOLDOWN "Refroidir" -#define MSG_SWITCH_PS_ON "Allumer alim." -#define MSG_SWITCH_PS_OFF "Eteindre alim." -#define MSG_EXTRUDE "Extrusion" -#define MSG_RETRACT "Retraction" -#define MSG_PREHEAT_PLA "Prechauffage PLA" -#define MSG_PREHEAT_ABS "Prechauffage ABS" -#define MSG_MOVE_AXIS "Deplacer un axe" -#define MSG_MOVE_X "Move X" -#define MSG_MOVE_Y "Move Y" -#define MSG_MOVE_Z "Move Z" -#define MSG_MOVE_E "Extruder" -#define MSG_MOVE_E1 "Extruder2" -#define MSG_MOVE_E2 "Extruder3" -#define MSG_MOVE_01MM "Move 0.1mm" -#define MSG_MOVE_1MM "Move 1mm" -#define MSG_MOVE_10MM "Move 10mm" -#define MSG_SPEED " Vitesse" -#define MSG_NOZZLE "Buse" -#define MSG_NOZZLE1 "Buse2" -#define MSG_NOZZLE2 "Buse3" -#define MSG_BED "Plateau" -#define MSG_FAN_SPEED "Vite. ventilateur" -#define MSG_FLOW "Flux" -#define MSG_FLOW0 "Flux 0" -#define MSG_FLOW1 "Flux 1" -#define MSG_FLOW2 "Flux 2" -#define MSG_CONTROL "Controler" -#define MSG_MIN " \002 Min" -#define MSG_MAX " \002 Max" -#define MSG_FACTOR " \002 Facteur" -#define MSG_AUTOTEMP "Temp. Auto." -#define MSG_ON "Marche " -#define MSG_OFF "Arret" -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Accel" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX "Vmax" -#define MSG_X "x" -#define MSG_Y "y" -#define MSG_Z "z" -#define MSG_E "e" -#define MSG_VMIN "Vmin" -#define MSG_VTRAV_MIN "Vdepl min" -#define MSG_AMAX "Amax " -#define MSG_A_RETRACT "A-retract" -#define MSG_XSTEPS "Xpas/mm" -#define MSG_YSTEPS "Ypas/mm" -#define MSG_ZSTEPS "Zpas/mm" -#define MSG_ESTEPS "Epas/mm" -#define MSG_TEMPERATURE "Temperature" -#define MSG_MOTION "Mouvement" -#define MSG_CONTRAST "Contraste LCD" -#define MSG_STORE_EPROM "Sauver config" -#define MSG_LOAD_EPROM "Lire config" -#define MSG_RESTORE_FAILSAFE "Restaurer defauts" -#define MSG_REFRESH "Actualiser" -#define MSG_WATCH "Surveiller" -#define MSG_PREPARE "Preparer" -#define MSG_TUNE "Regler" -#define MSG_PAUSE_PRINT "Interrompre impr." -#define MSG_RESUME_PRINT "Reprendre impr." -#define MSG_STOP_PRINT "Arreter impr." -#define MSG_CARD_MENU "Impr. depuis SD" -#define MSG_NO_CARD "Pas de carte" -#define MSG_DWELL "Repos..." -#define MSG_USERWAIT "Atten. de l'util." -#define MSG_RESUMING "Repri. de l'impr." -#define MSG_PRINT_ABORTED "Print aborted" -#define MSG_NO_MOVE "Aucun mouvement." -#define MSG_KILLED "MORT." -#define MSG_STOPPED "STOPPE." -#define MSG_STEPPER_RELEASED "RELACHE." -#define MSG_CONTROL_RETRACT "Retraction mm" -#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm" -#define MSG_CONTROL_RETRACTF "Retraction V" -#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" -#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" -#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm" -#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" -#define MSG_AUTORETRACT "Retract. Auto." -#define MSG_FILAMENTCHANGE "Changer filament" -#define MSG_INIT_SDCARD "Init. la carte SD" -#define MSG_CNG_SDCARD "Changer de carte" -#define MSG_ZPROBE_OUT "Z sonde exte. lit" -#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z" -#define MSG_ZPROBE_ZOFFSET "Offset Z" -#define MSG_BABYSTEP_X "Babystep X" -#define MSG_BABYSTEP_Y "Babystep Y" -#define MSG_BABYSTEP_Z "Babystep Z" -#define MSG_ENDSTOP_ABORT "Butee abandon" -#define MSG_CONTRAST "Contrast" +#define MSG_RECTRACT "Rectract" +#define MSG_STEPPER_RELEASED "RELACHE." #endif // LANGUAGE_FR_H diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 4c8dfec22..b70a0841c 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -1,9 +1,13 @@ +/** + * Italian + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_IT_H #define LANGUAGE_IT_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " pronto." #define MSG_SD_INSERTED "SD Card inserita" #define MSG_SD_REMOVED "SD Card rimossa" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ypassi/mm" #define MSG_ZSTEPS "Zpassi/mm" #define MSG_ESTEPS "Epassi/mm" -#define MSG_RECTRACT "Ritrai" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" #define MSG_CONTRAST "LCD contrast" @@ -121,6 +124,7 @@ #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_CONTRAST "Contrast" + +#define MSG_RECTRACT "Ritrai" #endif // LANGUAGE_IT_H diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 972f825e9..56162d34d 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -1,9 +1,13 @@ +/** + * Dutch + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_NL_H #define LANGUAGE_NL_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " gereed." #define MSG_SD_INSERTED "Kaart ingestoken" #define MSG_SD_REMOVED "Kaart verwijderd" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" -#define MSG_RECTRACT "Terugtrekken" #define MSG_TEMPERATURE "Temperatuur" #define MSG_MOTION "Beweging" #define MSG_CONTRAST "LCD contrast" @@ -122,4 +125,6 @@ #define MSG_BABYSTEP_Z "Babystap Z" #define MSG_ENDSTOP_ABORT "Endstop afbr." +#define MSG_RECTRACT "Terugtrekken" + #endif // LANGUAGE_NL_H diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 4426d014c..430b90053 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -1,128 +1,131 @@ +/** + * Polish + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_PL_H #define LANGUAGE_PL_H -// LCD Menu Messages -// Please note these are limited to 17 characters! +#define WELCOME_MSG MACHINE_NAME " gotowy." +#define MSG_SD_INSERTED "Karta wlozona" +#define MSG_SD_REMOVED "Karta usunieta" +#define MSG_MAIN "Menu glowne" +#define MSG_AUTOSTART "Autostart" +#define MSG_DISABLE_STEPPERS "Wylacz silniki" +#define MSG_AUTO_HOME "Auto. poz. zerowa" +#define MSG_SET_HOME_OFFSETS "Set home offsets" +#define MSG_SET_ORIGIN "Ustaw punkt zero" +#define MSG_PREHEAT_PLA "Rozgrzej PLA" +#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1" +#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2" +#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3" +#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko" +#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" +#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" +#define MSG_PREHEAT_ABS "Rozgrzej ABS" +#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1" +#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2" +#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3" +#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko" +#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" +#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" +#define MSG_COOLDOWN "Chlodzenie" +#define MSG_SWITCH_PS_ON "Wlacz zasilacz" +#define MSG_SWITCH_PS_OFF "Wylacz zasilacz" +#define MSG_EXTRUDE "Ekstruzja" +#define MSG_RETRACT "Cofanie" +#define MSG_MOVE_AXIS "Ruch osi" +#define MSG_MOVE_X "Przesun w X" +#define MSG_MOVE_Y "Przesun w Y" +#define MSG_MOVE_Z "Przesun w Z" +#define MSG_MOVE_E "Ekstruzja (os E)" +#define MSG_MOVE_E1 "Extruder2" +#define MSG_MOVE_E2 "Extruder3" +#define MSG_MOVE_01MM "Przesuwaj co .1mm" +#define MSG_MOVE_1MM "Przesuwaj co 1mm" +#define MSG_MOVE_10MM "Przesuwaj co 10mm" +#define MSG_SPEED "Predkosc" +#define MSG_NOZZLE "Dysza" +#define MSG_NOZZLE1 "Dysza 2" +#define MSG_NOZZLE2 "Dysza 3" +#define MSG_BED "Loze" +#define MSG_FAN_SPEED "Obroty wiatraka" +#define MSG_FLOW "Przeplyw" +#define MSG_FLOW0 "Przeplyw 0" +#define MSG_FLOW1 "Przeplyw 1" +#define MSG_FLOW2 "Przeplyw 2" +#define MSG_CONTROL "Ustawienia" +#define MSG_MIN " \002 Min" +#define MSG_MAX " \002 Max" +#define MSG_FACTOR " \002 Mnoznik" +#define MSG_AUTOTEMP "Auto. temperatura" +#define MSG_ON "Wl. " +#define MSG_OFF "Wyl." +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Przyspieszenie" +#define MSG_VXY_JERK "Zryw Vxy" +#define MSG_VZ_JERK "Zryw Vz" +#define MSG_VE_JERK "Zryw Ve" +#define MSG_VMAX "Vmax" +#define MSG_X "x" +#define MSG_Y "y" +#define MSG_Z "z" +#define MSG_E "e" +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "Vskok min" +#define MSG_AMAX "Amax" +#define MSG_A_RETRACT "A-wycofanie" +#define MSG_XSTEPS "krokiX/mm" +#define MSG_YSTEPS "krokiY/mm" +#define MSG_ZSTEPS "krokiZ/mm" +#define MSG_ESTEPS "krokiE/mm" +#define MSG_TEMPERATURE "Temperatura" +#define MSG_MOTION "Ruch" +#define MSG_CONTRAST "Kontrast LCD" +#define MSG_STORE_EPROM "Zapisz w pamieci" +#define MSG_LOAD_EPROM "Wczytaj z pamieci" +#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne" +#define MSG_REFRESH "\004Odswiez" +#define MSG_WATCH "Ekran glowny" +#define MSG_PREPARE "Przygotuj" +#define MSG_TUNE "Strojenie" +#define MSG_PAUSE_PRINT "Pauza" +#define MSG_RESUME_PRINT "Wznowienie" +#define MSG_STOP_PRINT "Stop" +#define MSG_CARD_MENU "Menu karty SD" +#define MSG_NO_CARD "Brak karty" +#define MSG_DWELL "Uspij..." +#define MSG_USERWAIT "Oczekiwanie..." +#define MSG_RESUMING "Wznawianie druku" +#define MSG_PRINT_ABORTED "Print aborted" +#define MSG_NO_MOVE "Brak ruchu" +#define MSG_KILLED "Ubity. " +#define MSG_STOPPED "Zatrzymany. " +#define MSG_CONTROL_RETRACT "Wycofaj mm" +#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm" +#define MSG_CONTROL_RETRACTF "Wycofaj V" +#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" +#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm" +#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V" +#define MSG_AUTORETRACT "Auto. wycofanie" +#define MSG_FILAMENTCHANGE "Zmien filament" +#define MSG_INIT_SDCARD "Inicjal. karty SD" +#define MSG_CNG_SDCARD "Zmiana karty SD" +#define MSG_ZPROBE_OUT "Sonda Z za lozem" +#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z" +#define MSG_ZPROBE_ZOFFSET "Offset Z" +#define MSG_BABYSTEP_X "Babystep X" +#define MSG_BABYSTEP_Y "Babystep Y" +#define MSG_BABYSTEP_Z "Babystep Z" +#define MSG_ENDSTOP_ABORT "Blad wyl. kranc." -#define WELCOME_MSG MACHINE_NAME " gotowy." -#define MSG_SD_INSERTED "Karta wlozona" -#define MSG_SD_REMOVED "Karta usunieta" -#define MSG_MAIN "Menu glowne" -#define MSG_AUTOSTART "Autostart" -#define MSG_DISABLE_STEPPERS "Wylacz silniki" -#define MSG_AUTO_HOME "Auto. poz. zerowa" -#define MSG_SET_HOME_OFFSETS "Set home offsets" -#define MSG_SET_ORIGIN "Ustaw punkt zero" -#define MSG_PREHEAT_PLA "Rozgrzej PLA" -#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1" -#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2" -#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3" -#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko" -#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" -#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" -#define MSG_PREHEAT_ABS "Rozgrzej ABS" -#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1" -#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2" -#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3" -#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko" -#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" -#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" -#define MSG_COOLDOWN "Chlodzenie" -#define MSG_SWITCH_PS_ON "Wlacz zasilacz" -#define MSG_SWITCH_PS_OFF "Wylacz zasilacz" -#define MSG_EXTRUDE "Ekstruzja" -#define MSG_RETRACT "Cofanie" -#define MSG_MOVE_AXIS "Ruch osi" -#define MSG_MOVE_X "Przesun w X" -#define MSG_MOVE_Y "Przesun w Y" -#define MSG_MOVE_Z "Przesun w Z" -#define MSG_MOVE_E "Ekstruzja (os E)" -#define MSG_MOVE_E1 "Extruder2" -#define MSG_MOVE_E2 "Extruder3" -#define MSG_MOVE_01MM "Przesuwaj co .1mm" -#define MSG_MOVE_1MM "Przesuwaj co 1mm" -#define MSG_MOVE_10MM "Przesuwaj co 10mm" -#define MSG_SPEED "Predkosc" -#define MSG_NOZZLE "Dysza" -#define MSG_NOZZLE1 "Dysza 2" -#define MSG_NOZZLE2 "Dysza 3" -#define MSG_BED "Loze" -#define MSG_FAN_SPEED "Obroty wiatraka" -#define MSG_FLOW "Przeplyw" -#define MSG_FLOW0 "Przeplyw 0" -#define MSG_FLOW1 "Przeplyw 1" -#define MSG_FLOW2 "Przeplyw 2" -#define MSG_CONTROL "Kontrola" -#define MSG_MIN " \002 Min" -#define MSG_MAX " \002 Max" -#define MSG_FACTOR " \002 Mnoznik" -#define MSG_AUTOTEMP "Auto. temperatura" -#define MSG_ON "Wl. " -#define MSG_OFF "Wyl." -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Przyspieszenie" -#define MSG_VXY_JERK "Zryw Vxy" -#define MSG_VZ_JERK "Zryw Vz" -#define MSG_VE_JERK "Zryw Ve" -#define MSG_VMAX "Vmax" -#define MSG_X "x" -#define MSG_Y "y" -#define MSG_Z "z" -#define MSG_E "e" -#define MSG_VMIN "Vmin" -#define MSG_VTRAV_MIN "Vskok min" -#define MSG_AMAX "Amax" -#define MSG_A_RETRACT "A-wycofanie" -#define MSG_XSTEPS "krokiX/mm" -#define MSG_YSTEPS "krokiY/mm" -#define MSG_ZSTEPS "krokiZ/mm" -#define MSG_ESTEPS "krokiE/mm" -#define MSG_RECTRACT "Wycofanie" -#define MSG_TEMPERATURE "Temperatura" -#define MSG_MOTION "Ruch" -#define MSG_CONTRAST "Kontrast LCD" -#define MSG_STORE_EPROM "Zapisz w pamieci" -#define MSG_LOAD_EPROM "Wczytaj z pamieci" -#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne" -#define MSG_REFRESH "\004Odswiez" -#define MSG_WATCH "Ekran glowny" -#define MSG_PREPARE "Przygotuj" -#define MSG_CONTROL "Ustawienia" -#define MSG_TUNE "Strojenie" -#define MSG_PAUSE_PRINT "Pauza" -#define MSG_RESUME_PRINT "Wznowienie" -#define MSG_STOP_PRINT "Stop" -#define MSG_CARD_MENU "Menu karty SD" -#define MSG_NO_CARD "Brak karty" -#define MSG_DWELL "Uspij..." -#define MSG_USERWAIT "Oczekiwanie..." -#define MSG_RESUMING "Wznawianie druku" -#define MSG_PRINT_ABORTED "Print aborted" -#define MSG_NO_MOVE "Brak ruchu" -#define MSG_KILLED "Ubity. " -#define MSG_STOPPED "Zatrzymany. " -#define MSG_STEPPER_RELEASED "Zwolniony." -#define MSG_CONTROL_RETRACT "Wycofaj mm" -#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm" -#define MSG_CONTROL_RETRACTF "Wycofaj V" -#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" -#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" -#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm" -#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V" -#define MSG_AUTORETRACT "Auto. wycofanie" -#define MSG_FILAMENTCHANGE "Zmien filament" -#define MSG_INIT_SDCARD "Inicjal. karty SD" -#define MSG_CNG_SDCARD "Zmiana karty SD" -#define MSG_ZPROBE_OUT "Sonda Z za lozem" -#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z" -#define MSG_ZPROBE_ZOFFSET "Offset Z" -#define MSG_BABYSTEP_X "Babystep X" -#define MSG_BABYSTEP_Y "Babystep Y" -#define MSG_BABYSTEP_Z "Babystep Z" -#define MSG_ENDSTOP_ABORT "Blad wyl. kranc." -#define MSG_CONTRAST "Kontrast" +#define MSG_RECTRACT "Wycofanie" +#define MSG_STEPPER_RELEASED "Zwolniony." #endif // LANGUAGE_PL_H diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index 868e8530c..5c6f4fe7f 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -1,9 +1,13 @@ +/** + * Portuguese + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_PT_H #define LANGUAGE_PT_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME " pronto." #define MSG_SD_INSERTED "Cartao inserido" #define MSG_SD_REMOVED "Cartao removido" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Ypasso/mm:" #define MSG_ZSTEPS "Zpasso/mm:" #define MSG_ESTEPS "Epasso/mm:" -#define MSG_RECTRACT "Retrair" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" #define MSG_CONTRAST "Contrast" @@ -122,10 +125,11 @@ #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_RECTRACT "Retrair" +#define MSG_MAIN_WIDE "Menu Principal \003" #define MSG_PREPARE_ALT "Preparar \003" #define MSG_CONTROL_ARROW "Controle \x7E" #define MSG_RETRACT_ARROW "Retrair \x7E" -#define MSG_MAIN_WIDE "Menu Principal \003" #define MSG_STEPPER_RELEASED "Lancado." #endif // LANGUAGE_PT_H diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index 3ece77545..844b3776b 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -1,9 +1,13 @@ +/** + * Russian + * + * LCD Menu Messages + * Please note these are limited to 17 characters! + * + */ #ifndef LANGUAGE_RU_H #define LANGUAGE_RU_H -// LCD Menu Messages -// Please note these are limited to 17 characters! - #define WELCOME_MSG MACHINE_NAME "Готов." #define MSG_SD_INSERTED "Карта вставлена" #define MSG_SD_REMOVED "Карта извлечена" @@ -80,7 +84,6 @@ #define MSG_YSTEPS "Y шаг/mm:" #define MSG_ZSTEPS "Z шаг/mm:" #define MSG_ESTEPS "E шаг/mm:" -#define MSG_RECTRACT "Откат подачи \x7E" #define MSG_TEMPERATURE "Температура \x7E" #define MSG_MOTION "Скорости \x7E" #define MSG_CONTRAST "LCD contrast" @@ -121,6 +124,7 @@ #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_CONTRAST "Contrast" + +#define MSG_RECTRACT "Откат подачи \x7E" #endif // LANGUAGE_RU_H