From e9bcb9d048c03fe8e6b0b79e938f419648073d50 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 9 Oct 2017 15:58:02 -0500 Subject: [PATCH] Add 4 new LCD displays --- Marlin/Configuration.h | 35 +++- Marlin/src/config/default/Configuration.h | 32 ++- .../AlephObjects/TAZ4/Configuration.h | 32 ++- .../AliExpress/CL-260/Configuration.h | 32 ++- .../config/examples/Anet/A6/Configuration.h | 32 ++- .../config/examples/Anet/A8/Configuration.h | 32 ++- .../examples/BQ/Hephestos/Configuration.h | 32 ++- .../examples/BQ/Hephestos_2/Configuration.h | 34 +++- .../config/examples/BQ/WITBOX/Configuration.h | 32 ++- .../config/examples/Cartesio/Configuration.h | 32 ++- .../examples/Creality/CR-10/Configuration.h | 32 ++- .../src/config/examples/Felix/Configuration.h | 32 ++- .../examples/Felix/DUAL/Configuration.h | 32 ++- .../Folger Tech/i3-2020/Configuration.h | 34 +++- .../examples/Geeetech/GT2560/Configuration.h | 34 +++- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 36 +++- .../examples/Infitary/i3-M508/Configuration.h | 32 ++- .../examples/Malyan/M150/Configuration.h | 32 ++- .../RepRapWorld/Megatronics/Configuration.h | 32 ++- .../config/examples/RigidBot/Configuration.h | 32 ++- .../src/config/examples/SCARA/Configuration.h | 32 ++- .../examples/Sanguinololu/Configuration.h | 36 +++- .../config/examples/TinyBoy2/Configuration.h | 32 ++- .../examples/Velleman/K8200/Configuration.h | 35 +++- .../examples/Velleman/K8400/Configuration.h | 32 ++- .../Velleman/K8400/Dual-head/Configuration.h | 32 ++- .../examples/adafruit/ST7565/Configuration.h | 32 ++- .../FLSUN/auto_calibrate/Configuration.h | 34 +++- .../delta/FLSUN/kossel_mini/Configuration.h | 34 +++- .../examples/delta/generic/Configuration.h | 32 ++- .../delta/kossel_mini/Configuration.h | 32 ++- .../examples/delta/kossel_pro/Configuration.h | 32 ++- .../examples/delta/kossel_xl/Configuration.h | 32 ++- .../examples/gCreate/gMax1.5+/Configuration.h | 34 +++- .../config/examples/makibox/Configuration.h | 32 ++- .../examples/stm32f103ret6/Configuration.h | 4 +- .../examples/tvrrug/Round2/Configuration.h | 32 ++- .../src/config/examples/wt150/Configuration.h | 32 ++- Marlin/src/inc/Conditionals_LCD.h | 59 ++++-- Marlin/src/inc/SanityCheck.h | 43 +++- .../lcd/dogm/ultralcd_st7565_u8glib_VIKI.h | 6 - Marlin/src/lcd/ultralcd_impl_DOGM.h | 4 + Marlin/src/pins/pins_RAMPS.h | 186 +++++++++++++----- 43 files changed, 1348 insertions(+), 164 deletions(-) mode change 100644 => 100755 Marlin/src/config/examples/Creality/CR-10/Configuration.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9c566cb3c..99b9a05a0 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1236,9 +1235,8 @@ * SD CARD: SPI SPEED * * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors or LCD issues. + * This may be required to resolve "volume init" errors. */ - //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED @@ -1505,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index a43d2a0a0..99b9a05a0 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 0be730e33..feee91908 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -982,7 +981,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1524,6 +1523,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 8d0b8f622..0910dc4d6 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 7e9e4b1be..ff9aedb3d 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1105,7 +1104,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1663,6 +1662,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 53088a3ed..e7c4b162d 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -968,7 +967,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1512,6 +1511,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 0db288ec5..bdd5bfbf6 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -953,7 +952,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1495,6 +1494,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 5f07e117e..9349f72ea 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -90,7 +90,6 @@ // example configuration folder. // #define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -762,6 +761,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -961,7 +962,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1503,6 +1504,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 7b853cf2d..75314c446 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -953,7 +952,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1495,6 +1494,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index b9b3dda15..e4b92fefb 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // #define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -961,7 +960,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1503,6 +1502,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h old mode 100644 new mode 100755 index 077857416..811e7c359 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // #define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1392,7 +1391,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // MakerLab Mini Panel with graphic @@ -1514,6 +1513,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index 940543c6c..039529bf2 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -944,7 +943,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1486,6 +1485,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 9205c4e02..29aee2fab 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -944,7 +943,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1486,6 +1485,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h b/Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h index 1cd587b0c..14b177107 100644 --- a/Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -764,6 +763,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 2 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -965,7 +966,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1507,6 +1508,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 37a8c30d6..bf360df58 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 020000 //=========================================================================== //============================= Getting Started ============================= @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -977,7 +976,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1519,6 +1518,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 702ed68e4..dfa027f31 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 020000 //=========================================================================== //============================= Getting Started ============================= @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -761,6 +760,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 8 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -960,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1502,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 61a3cd903..388afeca5 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -966,7 +965,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1508,6 +1507,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 41bb37b51..4ec1bd9fe 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -96,7 +96,6 @@ // example configuration folder. // #define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -990,7 +989,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1532,6 +1531,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index ec17af5a2..503b6fe95 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index ad4d2f9a7..4c82d29d0 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -960,7 +959,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 2a93c5152..ce84c341c 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -121,7 +121,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -974,7 +973,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1516,6 +1515,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 897c70a43..f89c16e2d 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 020000 //=========================================================================== //============================= Getting Started ============================= @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -792,6 +791,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -991,7 +992,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1533,6 +1534,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index e252f5c60..e985e517a 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -107,7 +107,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1018,7 +1017,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1560,6 +1559,35 @@ // #define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 94d0ccf9c..1766f40f0 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -107,7 +107,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -789,6 +788,9 @@ #define INVERT_E4_DIR true // @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + // K8200: it is usual to have clamps for the glass plate on the heatbed #define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -989,7 +991,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1534,6 +1536,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + #endif // K8200_VM8201 //============================================================================= diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 23fff324a..65082ad40 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index 0d1099c79..09330100f 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 4371d684d..52c414069 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -962,7 +961,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1504,6 +1503,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 8dd3b8aa3..8e6445553 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -885,6 +884,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -1088,7 +1089,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1630,6 +1631,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 198dfea8e..4634d74c3 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -885,6 +884,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -1082,7 +1083,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1623,6 +1624,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 4257c49ba..0338e220a 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1079,7 +1078,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1620,6 +1619,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 599c00518..130345a4d 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1082,7 +1081,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1623,6 +1622,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 9d2b846ee..8b50cc116 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -95,7 +95,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1082,7 +1081,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1623,6 +1622,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index e47040182..e2100a84c 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -1091,7 +1090,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1632,6 +1631,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 4130c1c82..08496aa60 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // #define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -774,6 +773,8 @@ // @section homing +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + #define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. @@ -974,7 +975,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1516,6 +1517,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 7fb4b0be1..4f40cfb79 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -965,7 +964,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1507,6 +1506,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 434fd25b1..c827b56e0 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -59,14 +59,14 @@ //============================= DELTA Printer =============================== //=========================================================================== // For a Delta printer start with one of the configuration files in the -// example_configurations/delta directory and customize for your machine. +// config/examples/delta directory and customize for your machine. // //=========================================================================== //============================= SCARA Printer =============================== //=========================================================================== // For a SCARA printer start with the configuration files in -// example_configurations/SCARA and customize for your machine. +// config/examples/SCARA and customize for your machine. // // @section info diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 4e6a260d7..7408c536f 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -957,7 +956,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1499,6 +1498,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index b9a858205..1b7eb5730 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -91,7 +91,6 @@ // example configuration folder. // //#define SHOW_CUSTOM_BOOTSCREEN - // @section machine /** @@ -967,7 +966,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +//#define LEVEL_BED_CORNERS /** * Commands to execute at the end of G29 probing. @@ -1509,6 +1508,35 @@ // //#define OLED_PANEL_TINYBOY2 +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED + //============================================================================= //=============================== Extra Features ============================== //============================================================================= diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 0f79edbbc..69ca4363b 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -40,17 +40,8 @@ #elif ENABLED(MAKRPANEL) - #define DOGLCD - #define ULTIPANEL - #define DEFAULT_LCD_CONTRAST 17 #define U8GLIB_ST7565_64128N - #elif ENABLED(MINIPANEL) - - #define DOGLCD - #define ULTIPANEL - #define DEFAULT_LCD_CONTRAST 17 - #elif ENABLED(ANET_KEYPAD_LCD) #define REPRAPWORLD_KEYPAD @@ -116,6 +107,34 @@ #define U8GLIB_ST7920 #define ULTIPANEL + #elif ENABLED(CR10_STOCKDISPLAY) + + #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_2_NOP + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_2_NOP + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_2_NOP + #endif + + #elif ENABLED(MKS_12864OLED) + + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #define U8GLIB_SH1106 + + #elif ENABLED(MKS_MINI_12864) + + #define MINIPANEL + + #endif + + #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL) + #define DOGLCD + #define ULTIPANEL + #define DEFAULT_LCD_CONTRAST 17 #endif // Generic support for SSD1306 / SH1106 OLED based LCDs. @@ -125,7 +144,15 @@ #endif #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106) + #define ULTIMAKERCONTROLLER + + #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) + + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) @@ -249,14 +276,12 @@ #ifndef LCD_HEIGHT #define LCD_HEIGHT 4 #endif - #else // no panel but just LCD - #if ENABLED(ULTRA_LCD) - #ifndef LCD_WIDTH - #define LCD_WIDTH 16 - #endif - #ifndef LCD_HEIGHT - #define LCD_HEIGHT 2 - #endif + #elif ENABLED(ULTRA_LCD) // no panel but just LCD + #ifndef LCD_WIDTH + #define LCD_WIDTH 16 + #endif + #ifndef LCD_HEIGHT + #define LCD_HEIGHT 2 #endif #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index d841d6cbf..e3b430f6a 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1137,6 +1137,7 @@ static_assert(1 >= 0 * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER * SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER + * MKS_12864OLED => U8GLIB_SH1106 => ULTIMAKERCONTROLLER * miniVIKI => ULTIMAKERCONTROLLER * VIKI2 => ULTIMAKERCONTROLLER * ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER @@ -1144,19 +1145,34 @@ static_assert(1 >= 0 */ static_assert(1 >= 0 #if ENABLED(ULTIMAKERCONTROLLER) \ - && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \ - && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE) + && DISABLED(SAV_3DGLCD) \ + && DISABLED(miniVIKI) \ + && DISABLED(VIKI2) \ + && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + && DISABLED(PANEL_ONE) \ + && DISABLED(MKS_12864OLED) + 1 #endif - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(LCD_FOR_MELZI) + #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \ + && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \ + && DISABLED(LCD_FOR_MELZI) \ + && DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \ + && DISABLED(MKS_12864OLED) + 1 #endif - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER) + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \ + && DISABLED(BQ_LCD_SMART_CONTROLLER) + 1 #endif #if ENABLED(LCD_FOR_MELZI) + 1 #endif + #if ENABLED(MKS_12864OLED) + + 1 + #endif + #if ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) + + 1 + #endif #if ENABLED(CARTESIO_UI) + 1 #endif @@ -1181,10 +1197,15 @@ static_assert(1 >= 0 #if ENABLED(G3D_PANEL) + 1 #endif - #if ENABLED(MINIPANEL) + #if ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864) + 1 #endif - #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ANET_KEYPAD_LCD) + #if ENABLED(MKS_MINI_12864) + + 1 + #endif + #if ENABLED(REPRAPWORLD_KEYPAD) \ + && DISABLED(CARTESIO_UI) \ + && DISABLED(ANET_KEYPAD_LCD) + 1 #endif #if ENABLED(RIGIDBOT_PANEL) @@ -1286,6 +1307,16 @@ static_assert(1 >= 0 #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set." #endif +/** + * Digipot requirement + */ +#if ENABLED(DIGIPOT_MCP4018) + #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \ + || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1) + #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined." + #endif +#endif + /** * Require 4 or more elements in per-axis initializers */ diff --git a/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h b/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h index 772ede121..41a0d5c07 100644 --- a/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h +++ b/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h @@ -27,17 +27,11 @@ #if ENABLED(U8GLIB_ST7565_64128N) - #define ST7565_CLK_PIN DOGLCD_SCK #define ST7565_DAT_PIN DOGLCD_MOSI #define ST7565_CS_PIN DOGLCD_CS #define ST7565_A0_PIN DOGLCD_A0 - - - - - #include #define WIDTH 128 diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h index 9da4e5654..f9f1abcfe 100644 --- a/Marlin/src/lcd/ultralcd_impl_DOGM.h +++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h @@ -192,6 +192,10 @@ // Generic support for SSD1306 OLED I2C LCDs //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes +#elif ENABLED(MKS_12864OLED) + // MKS 128x64 (SH1106) OLED I2C LCD + U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes + //U8GLIB_SH1106_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes #elif ENABLED(U8GLIB_SH1106) // Generic support for SH1106 OLED I2C LCDs //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes diff --git a/Marlin/src/pins/pins_RAMPS.h b/Marlin/src/pins/pins_RAMPS.h index d0795ce10..7371fe835 100644 --- a/Marlin/src/pins/pins_RAMPS.h +++ b/Marlin/src/pins/pins_RAMPS.h @@ -63,7 +63,7 @@ // // Servos // -#if ENABLED(IS_RAMPS_13) +#ifdef IS_RAMPS_13 #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI #else #define SERVO0_PIN 11 @@ -243,54 +243,107 @@ // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN 40 // Z_CS_PIN -#define E_MUX1_PIN 42 // E0_CS_PIN -#define E_MUX2_PIN 44 // E1_CS_PIN +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// -// -// LCD / Controller -// #if ENABLED(ULTRA_LCD) + // + // LCD Display output pins + // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock + #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) + #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 42 #define LCD_PINS_D4 65 #define LCD_PINS_D5 66 #define LCD_PINS_D6 44 #define LCD_PINS_D7 64 + #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 + + #if DISABLED(NEWPANEL) + #define BEEPER_PIN 37 + #endif + + #else + + #if ENABLED(MKS_12864OLED) + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if DISABLED(NEWPANEL) + #define BEEPER_PIN 33 + #endif + + #endif + #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 // Buttons are attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif + #endif + // + // LCD Display input pins + // #if ENABLED(NEWPANEL) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #if ENABLED(CR10_STOCKDISPLAY) + #define BTN_EN1 17 + #define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + #define BTN_ENC 35 #define SD_DETECT_PIN 49 #define KILL_PIN 41 @@ -311,85 +364,112 @@ #define BTN_EN2 43 #define BTN_ENC 32 #define LCD_SDSS 53 - #define SD_DETECT_PIN -1 #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 + #define LCD_SDSS 53 #define SD_DETECT_PIN 49 #elif ENABLED(VIKI2) || ENABLED(miniVIKI) - #define BEEPER_PIN 33 - - // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 #define DOGLCD_CS 45 + #define DOGLCD_A0 44 #define LCD_SCREEN_ROT_180 + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 + #define BTN_EN1 22 #define BTN_EN2 7 #define BTN_ENC 39 #define SDSS 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 - #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 + #define BTN_EN1 35 #define BTN_EN2 37 #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 - #define LCD_BACKLIGHT_PIN 33 - #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 - // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 - #define KILL_PIN 64 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + + #elif ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 + + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + // GLCD features //#define LCD_CONTRAST 190 // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - // The encoder and click button + + #define BEEPER_PIN 37 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + + #define SDSS 53 + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN 42 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 - // not connected to a pin + + #define SDSS 53 #define SD_DETECT_PIN 49 + #define KILL_PIN 64 #else // Beeper on AUX-4 #define BEEPER_PIN 33 - // buttons are directly attached using AUX-2 + // Buttons are directly attached using AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 #elif ENABLED(PANEL_ONE) #define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN2 63 // AUX2 PIN 4 @@ -403,8 +483,6 @@ #if ENABLED(G3D_PANEL) #define SD_DETECT_PIN 49 #define KILL_PIN 41 - #else - //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif