diff --git a/buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py b/buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py index e132ff3af..580529c9c 100644 --- a/buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py +++ b/buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py @@ -7,5 +7,3 @@ for i, flag in enumerate(env["LINKFLAGS"]): env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script elif flag == "-T": env["LINKFLAGS"][i + 1] = custom_ld_script - - diff --git a/buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP_create_variant.py b/buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py similarity index 100% rename from buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP_create_variant.py rename to buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py diff --git a/buildroot/share/PlatformIO/variants/MEEB_3DP/variant.h b/buildroot/share/PlatformIO/variants/MEEB_3DP/variant.h index f9a545bf6..cd10bb3c0 100644 --- a/buildroot/share/PlatformIO/variants/MEEB_3DP/variant.h +++ b/buildroot/share/PlatformIO/variants/MEEB_3DP/variant.h @@ -1,20 +1,17 @@ -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ +#pragma once #define digitalPinToPort(P) ( PIN_MAP[P].gpio_device ) #define digitalPinToBitMask(P) ( BIT(PIN_MAP[P].gpio_bit) ) #define portOutputRegister(port) ( &(port->regs->ODR) ) #define portInputRegister(port) ( &(port->regs->IDR) ) -#define portSetRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->BSRR) ) -#define portClearRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->BRR) ) +#define portSetRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->BSRR) ) +#define portClearRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->BRR) ) -#define portConfigRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->CRL) ) +#define portConfigRegister(pin) ( &(PIN_MAP[pin].gpio_device->regs->CRL) ) static const uint8_t SS = BOARD_SPI1_NSS_PIN; static const uint8_t SS1 = BOARD_SPI2_NSS_PIN; static const uint8_t MOSI = BOARD_SPI1_MOSI_PIN; static const uint8_t MISO = BOARD_SPI1_MISO_PIN; static const uint8_t SCK = BOARD_SPI1_SCK_PIN; - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/platformio.ini b/platformio.ini index 2cd95fc69..d3a57aee2 100644 --- a/platformio.ini +++ b/platformio.ini @@ -8,7 +8,7 @@ # # Automatic targets - enable auto-uploading -# targets = upload +#targets = upload # # By default platformio build will abort after 5 errors. @@ -20,6 +20,9 @@ src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards default_envs = mega2560 +# +# The 'common' values are used for most Marlin builds +# [common] default_src_filter = + - - + extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py @@ -35,44 +38,9 @@ lib_deps = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip -# Common traits for environments using HAL/STM32 -[base_stm32] -platform = ststm32@<6.2.0 -platform_packages = framework-arduinoststm32@>=4.10700,<4.10800 -lib_deps = ${common.lib_deps} -lib_ignore = SoftwareSerial -build_flags = ${common.build_flags} - -IMarlin/src/HAL/STM32 -std=gnu++14 - -DUSBCON -DUSBD_USE_CDC -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + - -[common_stm32] -platform = ${base_stm32.platform} -extends = base_stm32 -build_flags = ${base_stm32.build_flags} -DUSBD_VID=0x0483 - -# Common traits for environments using HAL/STM32F1 -[common_stm32f1] -platform = ${common_stm32.platform} -build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py - ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + -lib_ignore = - Adafruit NeoPixel - SPI -lib_deps = ${common.lib_deps} - SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip - -[common_avr8] -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + - -# Globally defined properties -# inherited by all environments +# +# Default values apply to all 'env:' prefixed environments +# [env] framework = arduino build_flags = ${common.build_flags} @@ -89,6 +57,21 @@ monitor_speed = 250000 # # ################################# +################################# +# # +# AVR Architecture # +# # +################################# + +# +# AVR (8-bit) Common Environment values +# +[common_avr8] +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + + # # ATmega2560 # @@ -206,6 +189,12 @@ lib_ignore = TMCStepper platform = teensy extends = env:at90usb1286_cdc +################################# +# # +# DUE Architecture # +# # +################################# + # # Due (Atmel SAM3X8E ARM Cortex-M3) # @@ -252,6 +241,32 @@ platform = ${common_DUE_archim.platform} extends = common_DUE_archim build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name +################################# +# # +# SAMD51 Architecture # +# # +################################# + +# +# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4) +# +[env:SAMD51_grandcentral_m4] +platform = atmelsam +board = adafruit_grandcentral_m4 +build_flags = ${common.build_flags} -std=gnu++17 -Wno-register +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + +lib_deps = ${common.lib_deps} + SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip + Adafruit_SPIFlash=https://github.com/adafruit/Adafruit_SPIFlash/archive/master.zip +debug_tool = jlink + +################################# +# # +# LPC176x Architecture # +# # +################################# + # # NXP LPC176x ARM Cortex-M3 # @@ -286,6 +301,49 @@ platform = ${common_LPC.platform} extends = common_LPC board = nxp_lpc1769 +################################# +# # +# STM32 Architecture # +# # +################################# + +# +# HAL/STM32 Base Environment values +# +[base_stm32] +platform = ststm32@<6.2.0 +platform_packages = framework-arduinoststm32@>=4.10700,<4.10800 +lib_deps = ${common.lib_deps} +lib_ignore = SoftwareSerial +build_flags = ${common.build_flags} + -IMarlin/src/HAL/STM32 -std=gnu++14 + -DUSBCON -DUSBD_USE_CDC +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + + +# +# HAL/STM32 Common Environment values +# +[common_stm32] +platform = ${base_stm32.platform} +extends = base_stm32 +build_flags = ${base_stm32.build_flags} -DUSBD_VID=0x0483 + +# +# HAL/STM32F1 Common Environment values +# +[common_stm32f1] +platform = ${common_stm32.platform} +build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py + ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + +lib_ignore = + Adafruit NeoPixel + SPI +lib_deps = ${common.lib_deps} + SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip + # # STM32F103RC # @@ -312,7 +370,7 @@ build_flags = ${common_stm32f1.build_flags} -DUSE_USB_COMPOSITE -DVECT_TAB_OFFSET=0x2000 -DGENERIC_BOOTLOADER -extra_scripts = pre:buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP_create_variant.py +extra_scripts = pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py lib_deps = ${common_stm32f1.lib_deps} USBComposite for STM32F1@==0.91 @@ -701,75 +759,6 @@ build_flags = ${common_stm32.build_flags} extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py lib_ignore = Adafruit NeoPixel, SailfishLCD, SlowSoftI2CMaster, SoftwareSerial -# -# Teensy 3.1 / 3.2 (ARM Cortex-M4) -# -[env:teensy31] -platform = teensy -board = teensy31 -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -lib_ignore = Adafruit NeoPixel -src_filter = ${common.default_src_filter} + - -# -# Teensy 3.5 / 3.6 (ARM Cortex-M4) -# -[env:teensy35] -platform = teensy -board = teensy35 -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -lib_ignore = Adafruit NeoPixel -src_filter = ${common.default_src_filter} + - -# -# Espressif ESP32 -# -[env:esp32] -platform = espressif32@1.11.2 -board = esp32dev -build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0 -lib_deps = ${common.lib_deps} - AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip - ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip - ESP3DLib=https://github.com/luc-github/ESP3DLib.git - arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git - ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git -lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, ESPAsyncTCP -src_filter = ${common.default_src_filter} + -upload_speed = 115200 -#upload_port = marlinesp.local -#board_build.flash_mode = qio - -# -# Native -# No supported Arduino libraries, base Marlin only -# -[env:linux_native] -platform = native -framework = -build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined -src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include -build_unflags = -Wall -lib_ldf_mode = off -lib_deps = -src_filter = ${common.default_src_filter} + - -# -# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4) -# -[env:SAMD51_grandcentral_m4] -platform = atmelsam -board = adafruit_grandcentral_m4 -build_flags = ${common.build_flags} -std=gnu++17 -Wno-register -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + -lib_deps = ${common.lib_deps} - SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip - Adafruit_SPIFlash=https://github.com/adafruit/Adafruit_SPIFlash/archive/master.zip -debug_tool = jlink - # # RUMBA32 # @@ -803,6 +792,67 @@ platform = ${common_rumba32.platform} extends = common_rumba32 build_flags = ${common_rumba32.build_flags} -DUSBD_VID=0x8000 +################################# +# # +# Other Architectures # +# # +################################# + +# +# Espressif ESP32 +# +[env:esp32] +platform = espressif32@1.11.2 +board = esp32dev +build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0 +lib_deps = ${common.lib_deps} + AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip + ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip + ESP3DLib=https://github.com/luc-github/ESP3DLib.git + arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git + ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git +lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, ESPAsyncTCP +src_filter = ${common.default_src_filter} + +upload_speed = 115200 +#upload_port = marlinesp.local +#board_build.flash_mode = qio + +# +# Teensy 3.1 / 3.2 (ARM Cortex-M4) +# +[env:teensy31] +platform = teensy +board = teensy31 +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +lib_ignore = Adafruit NeoPixel +src_filter = ${common.default_src_filter} + + +# +# Teensy 3.5 / 3.6 (ARM Cortex-M4) +# +[env:teensy35] +platform = teensy +board = teensy35 +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +lib_ignore = Adafruit NeoPixel +src_filter = ${common.default_src_filter} + + +# +# Native +# No supported Arduino libraries, base Marlin only +# +[env:linux_native] +platform = native +framework = +build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined +src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include +build_unflags = -Wall +lib_ldf_mode = off +lib_deps = +src_filter = ${common.default_src_filter} + + # # Just print the dependency tree #