CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add loose soft endstop state, apply to UBL fine-tune (#19681)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Earle F. Philhower, III 2020-10-12 14:48:04 -07:00 committed by Scott Lahteine
parent 48a24202ef
commit ea65e10dc7
16 changed files with 106 additions and 133 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -1009,6 +1009,8 @@
lcd_mesh_edit_setup(new_z);
SET_SOFT_ENDSTOP_LOOSE(true);
do {
idle();
new_z = lcd_mesh_edit();
@ -1016,6 +1018,8 @@
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
} while (!ui.button_pressed());
SET_SOFT_ENDSTOP_LOOSE(false);
if (!lcd_map_control) ui.return_to_status(); // Just editing a single point? Return to status
if (click_and_hold(abort_fine_tune)) break; // Button held down? Abort editing

16
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -201,10 +201,6 @@ G29_TYPE GcodeSuite::G29() {
ABL_VAR int abl_probe_index;
#endif
#if BOTH(HAS_SOFTWARE_ENDSTOPS, PROBE_MANUALLY)
ABL_VAR bool saved_soft_endstops_state = true;
#endif
#if ABL_GRID
#if ENABLED(PROBE_MANUALLY)
@ -461,7 +457,7 @@ G29_TYPE GcodeSuite::G29() {
// Abort current G29 procedure, go back to idle state
if (seenA && g29_in_progress) {
SERIAL_ECHOLNPGM("Manual G29 aborted");
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
set_bed_leveling_enabled(abl_should_enable);
g29_in_progress = false;
TERN_(LCD_BED_LEVELING, ui.wait_for_move = false);
@ -482,7 +478,7 @@ G29_TYPE GcodeSuite::G29() {
if (abl_probe_index == 0) {
// For the initial G29 S2 save software endstop state
TERN_(HAS_SOFTWARE_ENDSTOPS, saved_soft_endstops_state = soft_endstops_enabled);
SET_SOFT_ENDSTOP_LOOSE(true);
// Move close to the bed before the first point
do_blocking_move_to_z(0);
}
@ -552,14 +548,14 @@ G29_TYPE GcodeSuite::G29() {
_manual_goto_xy(probePos); // Can be used here too!
// Disable software endstops to allow manual adjustment
// If G29 is not completed, they will not be re-enabled
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = false);
SET_SOFT_ENDSTOP_LOOSE(true);
G29_RETURN(false);
}
else {
// Leveling done! Fall through to G29 finishing code below
SERIAL_ECHOLNPGM("Grid probing done.");
// Re-enable software endstops, if needed
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
}
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
@ -570,7 +566,7 @@ G29_TYPE GcodeSuite::G29() {
_manual_goto_xy(probePos);
// Disable software endstops to allow manual adjustment
// If G29 is not completed, they will not be re-enabled
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = false);
SET_SOFT_ENDSTOP_LOOSE(true);
G29_RETURN(false);
}
else {
@ -578,7 +574,7 @@ G29_TYPE GcodeSuite::G29() {
SERIAL_ECHOLNPGM("3-point probing done.");
// Re-enable software endstops, if needed
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
if (!dryrun) {
vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal();

14
Marlin/src/gcode/bedlevel/mbl/G29.cpp
View File

@ -61,7 +61,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM("
void GcodeSuite::G29() {
static int mbl_probe_index = -1;
TERN_(HAS_SOFTWARE_ENDSTOPS, static bool saved_soft_endstops_state);
MeshLevelingState state = (MeshLevelingState)parser.byteval('S', (int8_t)MeshReport);
if (!WITHIN(state, 0, 5)) {
@ -98,26 +97,19 @@ void GcodeSuite::G29() {
}
// For each G29 S2...
if (mbl_probe_index == 0) {
#if HAS_SOFTWARE_ENDSTOPS
// For the initial G29 S2 save software endstop state
saved_soft_endstops_state = soft_endstops_enabled;
#endif
// Move close to the bed before the first point
do_blocking_move_to_z(0);
}
else {
// Save Z for the previous mesh position
mbl.set_zigzag_z(mbl_probe_index - 1, current_position.z);
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
}
// If there's another point to sample, move there with optional lift.
if (mbl_probe_index < GRID_MAX_POINTS) {
#if HAS_SOFTWARE_ENDSTOPS
// Disable software endstops to allow manual adjustment
// If G29 is not completed, they will not be re-enabled
soft_endstops_enabled = false;
#endif
// If G29 is left hanging without completion they won't be re-enabled!
SET_SOFT_ENDSTOP_LOOSE(true);
mbl.zigzag(mbl_probe_index++, ix, iy);
_manual_goto_xy({ mbl.index_to_xpos[ix], mbl.index_to_ypos[iy] });
}

5
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -222,8 +222,9 @@ void GcodeSuite::G28() {
return;
}
// Wait for planner moves to finish!
planner.synchronize();
planner.synchronize(); // Wait for planner moves to finish!
SET_SOFT_ENDSTOP_LOOSE(false); // Reset a leftover 'loose' motion state
// Disable the leveling matrix before homing
#if HAS_LEVELING

4
Marlin/src/gcode/calibrate/G34.cpp
View File

@ -40,7 +40,7 @@ void GcodeSuite::G34() {
if (homing_needed()) return;
TEMPORARY_SOFT_ENDSTOP_STATE(false);
SET_SOFT_ENDSTOP_LOOSE(true);
TEMPORARY_BED_LEVELING_STATE(false);
TemporaryGlobalEndstopsState unlock_z(false);
@ -148,6 +148,8 @@ void GcodeSuite::G34() {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Running Post Commands");
gcode.process_subcommands_now_P(PSTR(GANTRY_CALIBRATION_COMMANDS_POST));
#endif
SET_SOFT_ENDSTOP_LOOSE(false);
}
#endif // MECHANICAL_GANTRY_CALIBRATION

9
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -581,13 +581,12 @@ void GcodeSuite::G425() {
GcodeSuite::process_subcommands_now_P(PSTR(CALIBRATION_SCRIPT_PRE));
#endif
TEMPORARY_SOFT_ENDSTOP_STATE(false);
TEMPORARY_BED_LEVELING_STATE(false);
if (homing_needed_error()) return;
measurements_t m;
TEMPORARY_BED_LEVELING_STATE(false);
SET_SOFT_ENDSTOP_LOOSE(true);
measurements_t m;
float uncertainty = parser.seenval('U') ? parser.value_float() : CALIBRATION_MEASUREMENT_UNCERTAIN;
if (parser.seen('B'))
@ -612,6 +611,8 @@ void GcodeSuite::G425() {
else
calibrate_all();
SET_SOFT_ENDSTOP_LOOSE(false);
#ifdef CALIBRATION_SCRIPT_POST
GcodeSuite::process_subcommands_now_P(PSTR(CALIBRATION_SCRIPT_POST));
#endif

4
Marlin/src/gcode/control/M211.cpp
View File

@ -37,8 +37,8 @@ void GcodeSuite::M211() {
l_soft_max = soft_endstop.max.asLogical();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_SOFT_ENDSTOPS);
if (parser.seen('S')) soft_endstops_enabled = parser.value_bool();
serialprint_onoff(soft_endstops_enabled);
if (parser.seen('S')) soft_endstop._enabled = parser.value_bool();
serialprint_onoff(soft_endstop._enabled);
print_xyz(l_soft_min, PSTR(STR_SOFT_MIN), PSTR(" "));
print_xyz(l_soft_max, PSTR(STR_SOFT_MAX));
}

4
Marlin/src/gcode/feature/clean/G12.cpp
View File

@ -70,9 +70,11 @@ void GcodeSuite::G12() {
TEMPORARY_BED_LEVELING_STATE(!TEST(cleans, Z_AXIS) && planner.leveling_active);
#endif
TEMPORARY_SOFT_ENDSTOP_STATE(parser.boolval('E'));
SET_SOFT_ENDSTOP_LOOSE(!parser.boolval('E'));
nozzle.clean(pattern, strokes, radius, objects, cleans);
SET_SOFT_ENDSTOP_LOOSE(false);
}
#endif // NOZZLE_CLEAN_FEATURE

28
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -305,27 +305,9 @@ namespace ExtUI {
}
void setAxisPosition_mm(const float position, const axis_t axis, const feedRate_t feedrate/*=0*/) {
// Start with no limits to movement
float min = current_position[axis] - 1000,
max = current_position[axis] + 1000;
// Limit to software endstops, if enabled
#if HAS_SOFTWARE_ENDSTOPS
if (soft_endstops_enabled) switch (axis) {
case X_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_X, min = soft_endstop.min.x);
TERN_(MAX_SOFTWARE_ENDSTOP_X, max = soft_endstop.max.x);
break;
case Y_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Y, min = soft_endstop.min.y);
TERN_(MAX_SOFTWARE_ENDSTOP_Y, max = soft_endstop.max.y);
break;
case Z_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Z, min = soft_endstop.min.z);
TERN_(MAX_SOFTWARE_ENDSTOP_Z, max = soft_endstop.max.z);
default: break;
}
#endif // HAS_SOFTWARE_ENDSTOPS
// Get motion limit from software endstops, if any
float min, max;
soft_endstop.get_manual_axis_limits((AxisEnum)axis, min, max);
// Delta limits XY based on the current offset from center
// This assumes the center is 0,0
@ -389,8 +371,8 @@ namespace ExtUI {
}
#if HAS_SOFTWARE_ENDSTOPS
bool getSoftEndstopState() { return soft_endstops_enabled; }
void setSoftEndstopState(const bool value) { soft_endstops_enabled = value; }
bool getSoftEndstopState() { return soft_endstop._enabled; }
void setSoftEndstopState(const bool value) { soft_endstop._enabled = value; }
#endif
#if HAS_TRINAMIC_CONFIG

27
Marlin/src/lcd/menu/menu_motion.cpp
View File

@ -57,28 +57,9 @@
static void _lcd_move_xyz(PGM_P const name, const AxisEnum axis) {
if (ui.use_click()) return ui.goto_previous_screen_no_defer();
if (ui.encoderPosition && !ui.manual_move.processing) {
// Start with no limits to movement
float min = current_position[axis] - 1000,
max = current_position[axis] + 1000;
// Limit to software endstops, if enabled
#if HAS_SOFTWARE_ENDSTOPS
if (soft_endstops_enabled) switch (axis) {
case X_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_X, min = soft_endstop.min.x);
TERN_(MAX_SOFTWARE_ENDSTOP_X, max = soft_endstop.max.x);
break;
case Y_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Y, min = soft_endstop.min.y);
TERN_(MAX_SOFTWARE_ENDSTOP_Y, max = soft_endstop.max.y);
break;
case Z_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Z, min = soft_endstop.min.z);
TERN_(MAX_SOFTWARE_ENDSTOP_Z, max = soft_endstop.max.z);
default: break;
}
#endif // HAS_SOFTWARE_ENDSTOPS
// Get motion limit from software endstops, if any
float min, max;
soft_endstop.get_manual_axis_limits(axis, min, max);
// Delta limits XY based on the current offset from center
// This assumes the center is 0,0
@ -238,7 +219,7 @@ void menu_move() {
BACK_ITEM(MSG_MOTION);
#if BOTH(HAS_SOFTWARE_ENDSTOPS, SOFT_ENDSTOPS_MENU_ITEM)
EDIT_ITEM(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
EDIT_ITEM(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstop._enabled);
#endif
if (NONE(IS_KINEMATIC, NO_MOTION_BEFORE_HOMING) || all_axes_homed()) {

8
Marlin/src/lcd/menu/menu_probe_offset.cpp
View File

@ -48,16 +48,12 @@
float z_offset_backup, calculated_z_offset;
TERN_(HAS_LEVELING, bool leveling_was_active);
TERN_(HAS_SOFTWARE_ENDSTOPS, bool store_soft_endstops_enabled);
void prepare_for_calibration() {
z_offset_backup = probe.offset.z;
// Disable soft endstops for free Z movement
#if HAS_SOFTWARE_ENDSTOPS
store_soft_endstops_enabled = soft_endstops_enabled;
soft_endstops_enabled = false;
#endif
SET_SOFT_ENDSTOP_LOOSE(true);
// Disable leveling for raw planner motion
#if HAS_LEVELING
@ -68,7 +64,7 @@ void prepare_for_calibration() {
void set_offset_and_go_back(const float &z) {
probe.offset.z = z;
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = store_soft_endstops_enabled);
SET_SOFT_ENDSTOP_LOOSE(false);
TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
ui.goto_previous_screen_no_defer();
}

24
Marlin/src/lcd/tft/ui_480x320.cpp
View File

@ -813,27 +813,9 @@ static void moveAxis(AxisEnum axis, const int8_t direction) {
}
if (!ui.manual_move.processing) {
// Start with no limits to movement
float min = current_position[axis] - 1000,
max = current_position[axis] + 1000;
// Limit to software endstops, if enabled
#if HAS_SOFTWARE_ENDSTOPS
if (soft_endstops_enabled) switch (axis) {
case X_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_X, min = soft_endstop.min.x);
TERN_(MAX_SOFTWARE_ENDSTOP_X, max = soft_endstop.max.x);
break;
case Y_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Y, min = soft_endstop.min.y);
TERN_(MAX_SOFTWARE_ENDSTOP_Y, max = soft_endstop.max.y);
break;
case Z_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Z, min = soft_endstop.min.z);
TERN_(MAX_SOFTWARE_ENDSTOP_Z, max = soft_endstop.max.z);
default: break;
}
#endif // HAS_SOFTWARE_ENDSTOPS
// Get motion limit from software endstops, if any
float min, max;
soft_endstop.get_manual_axis_limits(axis, min, max);
// Delta limits XY based on the current offset from center
// This assumes the center is 0,0

2
Marlin/src/libs/nozzle.cpp
View File

@ -161,7 +161,7 @@ Nozzle nozzle;
LIMIT( end[arrPos].A, soft_endstop.min.A, soft_endstop.max.A); \
}while(0)
if (soft_endstops_enabled) {
if (soft_endstop.enabled()) {
LIMIT_AXIS(x);
LIMIT_AXIS(y);

17
Marlin/src/module/motion.cpp
View File

@ -534,12 +534,11 @@ void restore_feedrate_and_scaling() {
#if HAS_SOFTWARE_ENDSTOPS
bool soft_endstops_enabled = true;
// Software Endstops are based on the configured limits.
axis_limits_t soft_endstop = {
soft_endstops_t soft_endstop = {
{ X_MIN_POS, Y_MIN_POS, Z_MIN_POS },
{ X_MAX_POS, Y_MAX_POS, Z_MAX_POS }
{ X_MAX_POS, Y_MAX_POS, Z_MAX_POS },
{ true, false }
};
/**
@ -626,7 +625,7 @@ void restore_feedrate_and_scaling() {
if (DEBUGGING(LEVELING))
SERIAL_ECHOLNPAIR("Axis ", XYZ_CHAR(axis), " min:", soft_endstop.min[axis], " max:", soft_endstop.max[axis]);
}
}
/**
* Constrain the given coordinates to the software endstops.
@ -636,7 +635,7 @@ void restore_feedrate_and_scaling() {
*/
void apply_motion_limits(xyz_pos_t &target) {
if (!soft_endstops_enabled) return;
if (!soft_endstop._enabled) return;
#if IS_KINEMATIC
@ -688,7 +687,11 @@ void restore_feedrate_and_scaling() {
}
}
#endif // HAS_SOFTWARE_ENDSTOPS
#else // !HAS_SOFTWARE_ENDSTOPS
soft_endstops_t soft_endstop;
#endif // !HAS_SOFTWARE_ENDSTOPS
#if !UBL_SEGMENTED

57
Marlin/src/module/motion.h
View File

@ -148,26 +148,61 @@ inline float home_bump_mm(const AxisEnum axis) {
constexpr xyz_pos_t hotend_offset[1] = { { 0 } };
#endif
typedef struct { xyz_pos_t min, max; } axis_limits_t;
#if HAS_SOFTWARE_ENDSTOPS
extern bool soft_endstops_enabled;
extern axis_limits_t soft_endstop;
typedef struct {
xyz_pos_t min, max;
struct {
bool _enabled:1;
bool _loose:1;
};
bool enabled() { return _enabled && !_loose; }
void get_manual_axis_limits(const AxisEnum axis, float &amin, float &amax) {
amin = -100000; amax = 100000; // "No limits"
#if HAS_SOFTWARE_ENDSTOPS
if (enabled()) switch (axis) {
case X_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_X, amin = min.x);
TERN_(MAX_SOFTWARE_ENDSTOP_X, amax = max.x);
break;
case Y_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Y, amin = min.y);
TERN_(MAX_SOFTWARE_ENDSTOP_Y, amax = max.y);
break;
case Z_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Z, amin = min.z);
TERN_(MAX_SOFTWARE_ENDSTOP_Z, amax = max.z);
default: break;
}
#endif
}
} soft_endstops_t;
extern soft_endstops_t soft_endstop;
void apply_motion_limits(xyz_pos_t &target);
void update_software_endstops(const AxisEnum axis
#if HAS_HOTEND_OFFSET
, const uint8_t old_tool_index=0, const uint8_t new_tool_index=0
#endif
);
#define TEMPORARY_SOFT_ENDSTOP_STATE(enable) REMEMBER(tes, soft_endstops_enabled, enable);
#else
constexpr bool soft_endstops_enabled = false;
//constexpr axis_limits_t soft_endstop = {
// { X_MIN_POS, Y_MIN_POS, Z_MIN_POS },
// { X_MAX_POS, Y_MAX_POS, Z_MAX_POS } };
#define SET_SOFT_ENDSTOP_LOOSE(loose) (soft_endstop._loose = loose)
#else // !HAS_SOFTWARE_ENDSTOPS
typedef struct {
bool enabled() { return false; }
void get_manual_axis_limits(const AxisEnum axis, float &amin, float &amax) {
// No limits
amin = current_position[axis] - 1000;
amax = current_position[axis] + 1000;
}
} soft_endstops_t;
extern soft_endstops_t soft_endstop;
#define apply_motion_limits(V) NOOP
#define update_software_endstops(...) NOOP
#define TEMPORARY_SOFT_ENDSTOP_STATE(...) NOOP
#endif
#define SET_SOFT_ENDSTOP_LOOSE() NOOP
#endif // !HAS_SOFTWARE_ENDSTOPS
void report_real_position();
void report_current_position();

8
Marlin/src/module/tool_change.cpp
View File

@ -1017,14 +1017,10 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
// Raise by a configured distance to avoid workpiece, except with
// SWITCHING_NOZZLE_TWO_SERVOS, as both nozzles will lift instead.
if (!no_move) {
#if HAS_SOFTWARE_ENDSTOPS
const float maxz = _MIN(soft_endstop.max.z, Z_MAX_POS);
#else
constexpr float maxz = Z_MAX_POS;
#endif
const float newz = current_position.z + _MAX(-diff.z, 0.0);
// Check if Z has space to compensate at least z_offset, and if not, just abort now
const float newz = current_position.z + _MAX(-diff.z, 0.0);
const float maxz = _MIN(TERN(HAS_SOFTWARE_ENDSTOPS, soft_endstop.max.z, Z_MAX_POS), Z_MAX_POS);
if (newz > maxz) return;
current_position.z = _MIN(newz + toolchange_settings.z_raise, maxz);