Various fixups for single-nozzle filament swap (#12036)

This commit is contained in:
InsanityAutomation 2018-10-08 16:39:55 -04:00 committed by Scott Lahteine
parent 8dbb305e8e
commit ee253991d4
81 changed files with 417 additions and 345 deletions

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -157,13 +157,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
#define SINGLENOZZLE #define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -164,13 +164,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -157,13 +157,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -165,13 +165,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -197,13 +197,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -159,13 +159,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -176,13 +176,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -159,13 +159,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -187,13 +187,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -178,13 +178,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -176,13 +176,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -169,13 +169,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange // Parameters for filament retract / prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0 #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK //#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } #define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else #else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0 #define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif #endif

View File

@ -45,8 +45,8 @@ void M217_report(const bool eeprom=false) {
* M217 - Set SINGLENOZZLE toolchange parameters * M217 - Set SINGLENOZZLE toolchange parameters
* *
* S[mm] Swap length * S[mm] Swap length
* P[mm/s] Prime speed * P[mm/m] Prime speed
* R[mm/s] Retract speed * R[mm/m] Retract speed
*/ */
void GcodeSuite::M217() { void GcodeSuite::M217() {

View File

@ -1513,28 +1513,6 @@
// Add commands that need sub-codes to this list // Add commands that need sub-codes to this list
#define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY) #define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY)
// Single Nozzle swap on toolchange defaults
#if ENABLED(SINGLENOZZLE)
#ifndef SINGLENOZZLE_SWAP_LENGTH
#define SINGLENOZZLE_SWAP_LENGTH 0
#endif
#ifndef SINGLENOZZLE_SWAP_RETRACT_SPEED
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 60.0
#endif
#ifndef SINGLENOZZLE_SWAP_PRIME_SPEED
#define SINGLENOZZLE_SWAP_PRIME_SPEED 60.0
#endif
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#ifndef SINGLENOZZLE_TOOLCHANGE_POSITION
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#endif
#else
#ifndef SINGLENOZZLE_TOOLCHANGE_ZRAISE
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif
#endif
#endif
// Parking Extruder // Parking Extruder
#if ENABLED(PARKING_EXTRUDER) #if ENABLED(PARKING_EXTRUDER)
#ifndef PARKING_EXTRUDER_GRAB_DISTANCE #ifndef PARKING_EXTRUDER_GRAB_DISTANCE

View File

@ -602,8 +602,25 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "EXTRUDERS must be 1 with HEATERS_PARALLEL." #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
#endif #endif
#if ENABLED(SINGLENOZZLE) && !defined(SINGLENOZZLE_SWAP_LENGTH) #if ENABLED(SINGLENOZZLE)
#define SINGLENOZZLE_SWAP_LENGTH 0 #ifndef SINGLENOZZLE_SWAP_LENGTH
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_LENGTH. Please update your Configuration."
#elif !defined(SINGLENOZZLE_SWAP_RETRACT_SPEED)
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_RETRACT_SPEED. Please update your Configuration."
#elif !defined(SINGLENOZZLE_SWAP_PRIME_SPEED)
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_PRIME_SPEED. Please update your Configuration."
#endif
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#ifndef SINGLENOZZLE_TOOLCHANGE_POSITION
#error "SINGLENOZZLE_SWAP_PARK requires SINGLENOZZLE_TOOLCHANGE_POSITION. Please update your Configuration."
#elif !defined(SINGLENOZZLE_PARK_XY_FEEDRATE)
#error "SINGLENOZZLE_SWAP_PARK requires SINGLENOZZLE_PARK_XY_FEEDRATE. Please update your Configuration."
#endif
#else
#ifndef SINGLENOZZLE_TOOLCHANGE_ZRAISE
#error "SINGLENOZZLE requires SINGLENOZZLE_TOOLCHANGE_ZRAISE. Please update your Configuration."
#endif
#endif
#endif #endif
#elif ENABLED(MK2_MULTIPLEXER) #elif ENABLED(MK2_MULTIPLEXER)

View File

@ -663,6 +663,15 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
set_destination_from_current(); set_destination_from_current();
if (singlenozzle_swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(-singlenozzle_swap_length, MMM_TO_MMS(singlenozzle_retract_speed));
#else
current_position[E_AXIS] -= singlenozzle_swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(singlenozzle_retract_speed), active_extruder);
#endif
}
current_position[Z_AXIS] += ( current_position[Z_AXIS] += (
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
singlenozzle_change_point.z singlenozzle_change_point.z
@ -676,18 +685,9 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
current_position[X_AXIS] = singlenozzle_change_point.x; current_position[X_AXIS] = singlenozzle_change_point.x;
current_position[Y_AXIS] = singlenozzle_change_point.y; current_position[Y_AXIS] = singlenozzle_change_point.y;
planner.buffer_line(current_position, planner.max_feedrate_mm_s[Y_AXIS], active_extruder); planner.buffer_line(current_position, MMM_TO_MMS(SINGLENOZZLE_PARK_XY_FEEDRATE), active_extruder);
#endif #endif
if (singlenozzle_swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(-singlenozzle_swap_length, MMM_TO_MMS(singlenozzle_retract_speed));
#else
current_position[E_AXIS] -= singlenozzle_swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(singlenozzle_retract_speed), active_extruder);
#endif
}
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0]; singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];
if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) { if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0); thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
@ -711,7 +711,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#if ENABLED(SINGLENOZZLE_SWAP_PARK) #if ENABLED(SINGLENOZZLE_SWAP_PARK)
current_position[X_AXIS] = destination[X_AXIS]; current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS]; current_position[Y_AXIS] = destination[Y_AXIS];
planner.buffer_line(current_position, planner.max_feedrate_mm_s[Y_AXIS], active_extruder); planner.buffer_line(current_position, MMM_TO_MMS(SINGLENOZZLE_PARK_XY_FEEDRATE), active_extruder);
#endif #endif
do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]); do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]);