diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index da5dba0df..d9e2e40ca 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 54cbcacf6..7d92bb780 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -335,7 +335,7 @@
#endif
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
-#if ENABLED(MALYAN_LCD)
+#if EITHER(DGUS_LCD, MALYAN_LCD)
#define EXTENSIBLE_UI
#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
new file mode 100644
index 000000000..3601c9507
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
@@ -0,0 +1,1090 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/* DGUS implementation written by coldtobi in 2019 for Marlin */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(DGUS_LCD)
+
+#include "DGUSDisplay.h"
+#include "DGUSVPVariable.h"
+#include "DGUSDisplayDefinition.h"
+
+#include "../../ui_api.h"
+
+#include "../../../../Marlin.h"
+#include "../../../../module/temperature.h"
+#include "../../../../module/motion.h"
+#include "../../../../gcode/queue.h"
+#include "../../../../module/planner.h"
+#include "../../../../sd/cardreader.h"
+#include "../../../../libs/duration_t.h"
+#include "../../../../module/printcounter.h"
+
+// Preamble... 2 Bytes, usually 0x5A 0xA5, but configurable
+constexpr uint8_t DGUS_HEADER1 = 0x5A;
+constexpr uint8_t DGUS_HEADER2 = 0xA5;
+
+constexpr uint8_t DGUS_CMD_WRITEVAR = 0x82;
+constexpr uint8_t DGUS_CMD_READVAR = 0x83;
+
+#if ENABLED(DEBUG_DGUSLCD)
+ bool dguslcd_local_debug; // = false;
+#endif
+
+uint16_t DGUSScreenVariableHandler::ConfirmVP;
+
+#if ENABLED(SDSUPPORT)
+ int16_t DGUSScreenVariableHandler::top_file = 0;
+ int16_t DGUSScreenVariableHandler::file_to_print = 0;
+ static ExtUI::FileList filelist;
+#endif
+
+void (*DGUSScreenVariableHandler::confirm_action_cb)() = nullptr;
+
+//DGUSScreenVariableHandler ScreenHandler;
+
+DGUSLCD_Screens DGUSScreenVariableHandler::current_screen;
+DGUSLCD_Screens DGUSScreenVariableHandler::past_screens[NUM_PAST_SCREENS];
+uint8_t DGUSScreenVariableHandler::update_ptr;
+uint16_t DGUSScreenVariableHandler::skipVP;
+bool DGUSScreenVariableHandler::ScreenComplete;
+
+//DGUSDisplay dgusdisplay;
+
+rx_datagram_state_t DGUSDisplay::rx_datagram_state = DGUS_IDLE;
+uint8_t DGUSDisplay::rx_datagram_len = 0;
+bool DGUSDisplay::Initialized = false;
+bool DGUSDisplay::no_reentrance = false;
+
+#if DGUS_RX_BUFFER_SIZE > 256
+ typedef uint16_t r_ring_buffer_pos_t;
+#else
+ typedef uint8_t r_ring_buffer_pos_t;
+#endif
+
+#if DGUS_TX_BUFFER_SIZE > 256
+ typedef uint16_t t_ring_buffer_pos_t;
+#else
+ typedef uint8_t t_ring_buffer_pos_t;
+#endif
+
+class DGUSSerial {
+public:
+ DGUSSerial();
+ ~DGUSSerial();
+
+ r_ring_buffer_pos_t available();
+ t_ring_buffer_pos_t GetTxBufferFree();
+ void write(const uint8_t c);
+
+ int read();
+
+ // ISR for Rx
+ void store_rxd_char();
+ // ISR for Tx (UDRE vector)
+ void tx_udr_empty_irq(void);
+
+ inline volatile bool is_rx_overrun() {
+ return dgus_rx_overrun;
+ }
+
+ inline void reset_rx_overun() {
+ dgus_rx_overrun = false;
+ }
+
+private:
+ r_ring_buffer_pos_t atomic_read_rx_head();
+ void atomic_set_rx_tail(r_ring_buffer_pos_t value);
+ r_ring_buffer_pos_t atomic_read_rx_tail();
+
+ volatile bool dgus_rx_overrun = false;
+
+ struct ring_buffer_r {
+ volatile r_ring_buffer_pos_t head, tail;
+ unsigned char buffer[DGUS_RX_BUFFER_SIZE];
+ } rx_buffer = { 0, 0, { 0 } };
+
+ struct ring_buffer_t {
+ volatile t_ring_buffer_pos_t head, tail;
+ unsigned char buffer[DGUS_TX_BUFFER_SIZE];
+ } tx_buffer = { 0, 0, { 0 } };
+
+ #if DGUS_RX_BUFFER_SIZE > 256
+ volatile bool rx_tail_value_not_stable = false;
+ volatile uint16_t rx_tail_value_backup = 0;
+ #endif
+
+};
+
+static DGUSSerial dgusserial;
+
+// endianness swap
+uint16_t swap16(const uint16_t value) { return (value & 0xffU) << 8U | (value >> 8U); }
+
+bool populate_VPVar(const uint16_t VP, DGUS_VP_Variable * const ramcopy) {
+ // DEBUG_ECHOPAIR("populate_VPVar ", VP);
+ const DGUS_VP_Variable *pvp = DGUSLCD_FindVPVar(VP);
+ // DEBUG_ECHOLNPAIR(" pvp ", (uint16_t )pvp);
+ if (!pvp) return false;
+ memcpy_P(ramcopy, pvp, sizeof(DGUS_VP_Variable));
+ return true;
+}
+
+void DGUSScreenVariableHandler::sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool l4inflash) {
+ DGUS_VP_Variable ramcopy;
+ if (populate_VPVar(VP_MSGSTR1, &ramcopy)) {
+ ramcopy.memadr = (void*) line1;
+ l1inflash ? DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(ramcopy) : DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay(ramcopy);
+ }
+ if (populate_VPVar(VP_MSGSTR2, &ramcopy)) {
+ ramcopy.memadr = (void*) line2;
+ l2inflash ? DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(ramcopy) : DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay(ramcopy);
+ }
+ if (populate_VPVar(VP_MSGSTR3, &ramcopy)) {
+ ramcopy.memadr = (void*) line3;
+ l3inflash ? DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(ramcopy) : DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay(ramcopy);
+ }
+ if (populate_VPVar(VP_MSGSTR4, &ramcopy)) {
+ ramcopy.memadr = (void*) line4;
+ l4inflash ? DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(ramcopy) : DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay(ramcopy);
+ }
+}
+
+void DGUSScreenVariableHandler::HandleUserConfirmationPopUp(uint16_t VP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1, bool l2, bool l3, bool l4) {
+ if (current_screen == DGUSLCD_SCREEN_CONFIRM) {
+ // Already showing a pop up, so we need to cancel that first.
+ PopToOldScreen();
+ }
+
+ ConfirmVP = VP;
+ sendinfoscreen(line1, line2, line3, line4, l1, l2, l3, l4);
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_CONFIRM);
+}
+
+void DGUSScreenVariableHandler::setstatusmessage(const char *msg) {
+ DGUS_VP_Variable ramcopy;
+ if (populate_VPVar(VP_M117, &ramcopy)) {
+ ramcopy.memadr = (void*) msg;
+ DGUSLCD_SendStringToDisplay(ramcopy);
+ }
+}
+
+void DGUSScreenVariableHandler::setstatusmessagePGM(PGM_P const msg) {
+ DGUS_VP_Variable ramcopy;
+ if (populate_VPVar(VP_M117, &ramcopy)) {
+ ramcopy.memadr = (void*) msg;
+ DGUSLCD_SendStringToDisplayPGM(ramcopy);
+ }
+}
+
+// Send an 8 bit or 16 bit value to the display.
+void DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var) {
+ if (var.memadr) {
+ //DEBUG_ECHOPAIR(" DGUS_LCD_SendWordValueToDisplay ", var.VP);
+ //DEBUG_ECHOLNPAIR(" data ", *(uint16_t *)var.memadr);
+ uint8_t *tmp = (uint8_t *) var.memadr;
+ uint16_t data_to_send = (tmp[0] << 8);
+ if (var.size >= 1) data_to_send |= tmp[1];
+ dgusdisplay.WriteVariable(var.VP, data_to_send);
+ }
+}
+
+// Send an uint8_t between 0 and 255 to the display, but scale to a percentage (0..100)
+void DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var) {
+ if (var.memadr) {
+ //DEBUG_ECHOPAIR(" DGUS_LCD_SendWordValueToDisplay ", var.VP);
+ //DEBUG_ECHOLNPAIR(" data ", *(uint16_t *)var.memadr);
+ uint16_t tmp = *(uint8_t *) var.memadr +1 ; // +1 -> avoid rounding issues for the display.
+ tmp = map(tmp, 0, 255, 0, 100);
+ uint16_t data_to_send = swap16(tmp);
+ dgusdisplay.WriteVariable(var.VP, data_to_send);
+ }
+}
+
+// Send the current print time to the display.
+// It is using a hex display for that: It expects BSD coded data in the format xxyyzz
+void DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var) {
+ duration_t elapsed = print_job_timer.duration();
+
+ uint8_t days = elapsed.day(),
+ hours = elapsed.hour() % 24,
+ minutes = elapsed.minute() % 60,
+ seconds = elapsed.second() % 60;
+
+ char buf[14], *p = buf; // that two extra bytes saves us some flash...
+
+ if (days) { *p++ = days / 10 + '0'; *p++ = days % 10 + '0'; *p++ = 'd'; }
+ *p++ = hours / 10 + '0'; *p++ = hours % 10 + '0'; *p++ = 'h';
+ *p++ = minutes / 10 + '0'; *p++ = minutes % 10 + '0'; *p++ = 'm';
+ *p++ = seconds / 10 + '0'; *p++ = seconds % 10 + '0'; *p++ = 's';
+ *p = '\0';
+
+ dgusdisplay.WriteVariable(VP_PrintTime, buf, var.size, true);
+}
+
+
+
+// Send an uint8_t between 0 and 100 to a variable scale to 0..255
+void DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr) {
+ if (var.memadr) {
+ uint16_t value = swap16(*(uint16_t*)val_ptr);
+ *(uint8_t*)var.memadr = map(constrain(value, 0, 100), 0, 100, 0, 255);
+ }
+}
+
+// Sends a (RAM located) string to the DGUS Display
+// (Note: The DGUS Display does not clear after the \0, you have to
+// overwrite the remainings with spaces.// var.size has the display buffer size!
+void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var) {
+ char *tmp = (char*) var.memadr;
+ dgusdisplay.WriteVariable(var.VP, tmp, var.size, true);
+}
+
+// Sends a (flash located) string to the DGUS Display
+// (Note: The DGUS Display does not clear after the \0, you have to
+// overwrite the remainings with spaces.// var.size has the display buffer size!
+void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var) {
+ char *tmp = (char*) var.memadr;
+ dgusdisplay.WriteVariablePGM(var.VP, tmp, var.size, true);
+}
+
+#if ENABLED(SDSUPPORT)
+
+ void DGUSScreenVariableHandler::ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr) {
+ // default action executed when there is a SD card, but not printing
+ if (ExtUI::isMediaInserted() && !ExtUI::isPrintingFromMedia()) {
+ ScreenChangeHook(var, val_ptr);
+ dgusdisplay.RequestScreen(current_screen);
+ return;
+ }
+
+ // if we are printing, we jump to two screens after the requested one.
+ // This should host e.g a print pause / print abort / print resume dialog.
+ // This concept allows to recycle this hook for other file
+ if (ExtUI::isPrintingFromMedia() && !card.flag.abort_sd_printing) {
+ GotoScreen(DGUSLCD_SCREEN_SDPRINTMANIPULATION);
+ return;
+ }
+
+ // Don't let the user in the dark why there is no reaction.
+ if (!ExtUI::isMediaInserted()) {
+ setstatusmessagePGM(PSTR("No SD Card"));
+ return;
+ }
+ if (card.flag.abort_sd_printing) {
+ setstatusmessagePGM(PSTR("Aborting..."));
+ return;
+ }
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable& var, void *val_ptr) {
+ auto old_top = top_file;
+ int16_t scroll = (int16_t)swap16(*(uint16_t*)val_ptr);
+ if (scroll == 0) {
+ if (!filelist.isAtRootDir()) {
+ filelist.upDir();
+ top_file = 0;
+ ForceCompleteUpdate();
+ }
+ }
+ else {
+ top_file += scroll;
+ DEBUG_ECHOPAIR("new topfile calculated:", top_file);
+ if (top_file < 0) {
+ top_file = 0;
+ DEBUG_ECHOLN("Top of filelist reached");
+ }
+ else {
+ int16_t max_top = filelist.count() - DGUS_SD_FILESPERSCREEN;
+ NOLESS(max_top, 0);
+ NOMORE(top_file, max_top);
+ }
+ DEBUG_ECHOPAIR("new topfile adjusted:", top_file);
+ }
+
+ if (old_top != top_file) ForceCompleteUpdate();
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) {
+ uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file;
+ if (touched_nr > filelist.count()) return;
+ if (!filelist.seek(touched_nr)) return;
+ if (filelist.isDir()) {
+ filelist.changeDir(filelist.filename());
+ top_file = 0;
+ ForceCompleteUpdate();
+ return;
+ }
+
+ // Setup Confirmation screen
+ file_to_print = touched_nr;
+ HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true);
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) {
+ if(!filelist.seek(file_to_print)) return;
+ ExtUI::printFile(filelist.filename());
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_STATUS);
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) {
+ if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes.
+ switch (swap16(*(uint16_t*)val_ptr)) {
+ case 0: // Resume
+ if (ExtUI::isPrintingFromMediaPaused()) ExtUI::resumePrint();
+ break;
+ case 1: // Pause
+ if (!ExtUI::isPrintingFromMediaPaused()) ExtUI::pausePrint();
+ break;
+ case 2: // Abort
+ ScreenHandler.HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true);
+ break;
+ }
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr) {
+ ExtUI::stopPrint();
+ GotoScreen(DGUSLCD_SCREEN_MAIN);
+ }
+
+ void DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) {
+ uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN;
+ if (target_line > DGUS_SD_FILESPERSCREEN) return;
+ char tmpfilename[VP_SD_FileName_LEN + 1] = "";
+ var.memadr = (void*)tmpfilename;
+ if (filelist.seek(top_file + target_line))
+ snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0);
+ DGUSLCD_SendStringToDisplay(var);
+ }
+
+
+ void DGUSScreenVariableHandler::SDCardInserted() {
+ top_file = 0;
+ auto cs = ScreenHandler.getCurrentScreen();
+ if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS)
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_SDFILELIST);
+ }
+
+ void DGUSScreenVariableHandler::SDCardRemoved() {
+ if (current_screen == DGUSLCD_SCREEN_SDFILELIST
+ || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm))
+ || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION
+ ) ScreenHandler.GotoScreen(DGUSLCD_SCREEN_MAIN);
+ }
+
+ void DGUSScreenVariableHandler::SDCardError() {
+ DGUSScreenVariableHandler::SDCardRemoved();
+ ScreenHandler.sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("SD card error"), nullptr, true, true, true, true);
+ ScreenHandler.SetupConfirmAction(nullptr);
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP);
+ }
+
+#endif // SDSUPPORT
+
+void DGUSScreenVariableHandler::ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr) {
+ DGUS_VP_Variable ramcopy;
+ if (!populate_VPVar(ConfirmVP, &ramcopy)) return;
+ if (ramcopy.set_by_display_handler) ramcopy.set_by_display_handler(ramcopy, val_ptr);
+}
+
+const uint16_t* DGUSLCD_FindScreenVPMapList(uint8_t screen) {
+ const uint16_t *ret;
+ const struct VPMapping *map = VPMap;
+ while (ret = (uint16_t*) pgm_read_word(&(map->VPList))) {
+ if (pgm_read_byte(&(map->screen)) == screen) return ret;
+ map++;
+ }
+ return nullptr;
+}
+
+const DGUS_VP_Variable* DGUSLCD_FindVPVar(const uint16_t vp) {
+ const DGUS_VP_Variable *ret = ListOfVP;
+ do {
+ const uint16_t vpcheck = pgm_read_word(&(ret->VP));
+ if (vpcheck == 0) break;
+ if (vpcheck == vp) return ret;
+ ++ret;
+ } while (1);
+
+ DEBUG_ECHOLNPAIR("FindVPVar NOT FOUND ", vp);
+ return nullptr;
+}
+
+void DGUSScreenVariableHandler::ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr) {
+ if (!ExtUI::isPrinting()) {
+ ScreenChangeHook(var, val_ptr);
+ dgusdisplay.RequestScreen(current_screen);
+ }
+}
+
+void DGUSScreenVariableHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) {
+ uint8_t *tmp = (uint8_t*)val_ptr;
+
+ // The keycode in target is coded as , so 0x0100A means
+ // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special,
+ // meaning "return to previous screen"
+ DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1];
+
+ if (target == DGUSLCD_SCREEN_POPUP) {
+ // special handling for popup is to return to previous menu
+ if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb();
+ PopToOldScreen();
+ return;
+ }
+
+ UpdateNewScreen(target);
+
+ #ifdef DEBUG_DGUSLCD
+ if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", x);
+ #endif
+}
+
+void DGUSScreenVariableHandler::HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr) {
+ thermalManager.disable_all_heaters();
+ ScreenHandler.ForceCompleteUpdate(); // hint to send all data.
+}
+
+void DGUSScreenVariableHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr) {
+ uint16_t newvalue = swap16(*(uint16_t*)val_ptr);
+ uint16_t acceptedvalue;
+
+ switch (var.VP) {
+ default: return;
+ #if HOTENDS >= 1
+ case VP_T_E1_Set:
+ thermalManager.setTargetHotend(newvalue, 0);
+ acceptedvalue = thermalManager.temp_hotend[0].target;
+ break;
+ #endif
+ #if HOTENDS >= 2
+ case VP_T_E2_Set:
+ thermalManager.setTargetHotend(newvalue, 1);
+ acceptedvalue = thermalManager.temp_hotend[1].target;
+ break;
+ #endif
+ #if HAS_HEATED_BED
+ case VP_T_Bed_Set:
+ thermalManager.setTargetBed(newvalue);
+ acceptedvalue = thermalManager.temp_bed.target;
+ break;
+ #endif
+ }
+
+ // reply to display the new value to update the view if the new value was rejected by the Thermal Manager.
+ if (newvalue != acceptedvalue && var.send_to_display_handler) var.send_to_display_handler(var);
+ ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
+}
+
+void DGUSScreenVariableHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr) {
+ uint16_t newvalue = swap16(*(uint16_t*)val_ptr);
+ uint8_t target_extruder;
+ switch (var.VP) {
+ default: return;
+ #if (HOTENDS >= 1)
+ case VP_Flowrate_E1: target_extruder = 0; break;
+ #endif
+ #if (HOTENDS >= 2)
+ case VP_Flowrate_E2: target_extruder = 1; break;
+ #endif
+ }
+
+ planner.flow_percentage[target_extruder] = newvalue;
+ planner.refresh_e_factor(target_extruder);
+ ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
+}
+
+void DGUSScreenVariableHandler::HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr) {
+ DEBUG_ECHOLNPGM("HandleManualMove");
+
+ int16_t movevalue = swap16(*(uint16_t*)val_ptr);
+ float target = movevalue * 0.01f;
+ ExtUI::extruder_t target_extruder;
+
+ switch (var.VP) {
+ #if HOTENDS >=1
+ case VP_MOVE_E1: target_extruder = ExtUI::extruder_t::E0; break;
+ #endif
+ #if HOTENDS >=2
+ case VP_MOVE_E2: target_extruder = ExtUI::extruder_t::E1; break
+ #endif
+ default: return;
+ }
+
+ target += ExtUI::getAxisPosition_mm(target_extruder);
+ ExtUI::setAxisPosition_mm(target, target_extruder);
+ skipVP = var.VP;
+}
+
+void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
+ DEBUG_ECHOLNPGM("HandleManualMove");
+
+ int16_t movevalue = swap16(*(uint16_t*)val_ptr);
+ char axiscode;
+ unsigned int speed = 1500; //FIXME: get default feedrate for manual moves, dont hardcode.
+
+ switch (var.VP) {
+ case VP_MOVE_X:
+ axiscode = 'X';
+ if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove;
+ break;
+
+ case VP_MOVE_Y:
+ axiscode = 'Y';
+ if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove;
+ break;
+
+ case VP_MOVE_Z:
+ axiscode = 'Z';
+ speed = 300; // default to 5mm/s
+ if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove;
+ break;
+
+ case VP_HOME_ALL: // only used for homing
+ axiscode = '\0';
+ movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing.
+ break;
+
+ default: return;
+ }
+
+ if (!movevalue) {
+ // homing
+ DEBUG_ECHOPAIR(" homing ", axiscode);
+ char buf[6] = "G28 X";
+ buf[4] = axiscode;
+ //DEBUG_ECHOPAIR(" ", buf);
+ while (!enqueue_and_echo_command(buf)) idle();
+ //DEBUG_ECHOLN(" ✓");
+ ScreenHandler.ForceCompleteUpdate();
+ return;
+ }
+ else {
+ //movement
+ DEBUG_ECHOPAIR(" move ", axiscode);
+ bool old_relative_mode = relative_mode;
+ if (!relative_mode) {
+ //DEBUG_ECHO(" G91");
+ while (!enqueue_and_echo_command("G91")) idle();
+ //DEBUG_ECHOPGM(" ✓ ");
+ }
+ char buf[32]; // G1 X9999.99 F12345
+ unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s);
+ char sign[]="\0";
+ int16_t value = movevalue / 100;
+ if (movevalue < 0) { value = -value; sign[0] = '-'; }
+ int16_t fraction = ABS(movevalue) % 100;
+ snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed);
+ //DEBUG_ECHOPAIR(" ", buf);
+ while (!enqueue_and_echo_command(buf)) idle();
+ //DEBUG_ECHOLN(" ✓ ");
+ if (backup_speed != speed) {
+ snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed);
+ while (!enqueue_and_echo_command(buf)) idle();
+ //DEBUG_ECHOPAIR(" ", buf);
+ }
+ //while (!enqueue_and_echo_command(buf)) idle();
+ //DEBUG_ECHOLN(" ✓ ");
+ if (!old_relative_mode) {
+ //DEBUG_ECHO("G90");
+ while (!enqueue_and_echo_command("G90")) idle();
+ //DEBUG_ECHO(" ✓ ");
+ }
+ }
+
+ ScreenHandler.ForceCompleteUpdate();
+ DEBUG_ECHOLNPGM("manmv done.");
+ return;
+
+ cannotmove:
+ DEBUG_ECHOLNPAIR(" cannot move ", axiscode);
+ return;
+}
+
+void DGUSScreenVariableHandler::UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup) {
+ DEBUG_ECHOLNPAIR("SetNewScreen: ", newscreen);
+
+ if (!popup) {
+ memmove(&past_screens[1], &past_screens[0], sizeof(past_screens) - 1);
+ past_screens[0] = current_screen;
+ }
+
+ current_screen = newscreen;
+ skipVP = 0;
+ ForceCompleteUpdate();
+}
+
+void DGUSScreenVariableHandler::PopToOldScreen() {
+ DEBUG_ECHOLNPAIR("PopToOldScreen s=", past_screens[0]);
+ GotoScreen(past_screens[0], true);
+ memmove(&past_screens[0], &past_screens[1], sizeof(past_screens) - 1);
+ past_screens[sizeof(past_screens) - 1] = DGUSLCD_SCREEN_MAIN;
+}
+
+void DGUSScreenVariableHandler::UpdateScreenVPData() {
+ DEBUG_ECHOPAIR(" UpdateScreenVPData Screen: ", current_screen);
+
+ const uint16_t *VPList = DGUSLCD_FindScreenVPMapList(current_screen);
+ if (!VPList) {
+ DEBUG_ECHOLNPAIR(" NO SCREEN FOR: ", current_screen);
+ ScreenComplete = true;
+ return; // nothing to do, likely a bug or boring screen.
+ }
+
+ // Round-Robbin updating of all VPs.
+ VPList += update_ptr;
+
+ bool sent_one = false;
+ do {
+ uint16_t VP = pgm_read_word(VPList);
+ DEBUG_ECHOPAIR(" VP: ", VP);
+ if (!VP) {
+ update_ptr = 0;
+ DEBUG_ECHOLNPGM(" UpdateScreenVPData done");
+ ScreenComplete = true;
+ return; // Screen completed.
+ }
+
+ if (VP == skipVP) {
+ skipVP = 0;
+ continue;
+ }
+
+ DGUS_VP_Variable rcpy;
+ if (populate_VPVar(VP, &rcpy)) {
+ uint8_t expected_tx = 6 + rcpy.size; // expected overhead is 6 bytes + payload.
+ // Send the VP to the display, but try to avoid overruning the Tx Buffer.
+ // But send at least one VP, to avoid getting stalled.
+ if (rcpy.send_to_display_handler && (!sent_one || expected_tx <= dgusdisplay.GetFreeTxBuffer())) {
+ //DEBUG_ECHOPAIR(" calling handler for ", rcpy.VP);
+ sent_one = true;
+ rcpy.send_to_display_handler(rcpy);
+ }
+ else {
+ //auto x=dgusdisplay.GetFreeTxBuffer();
+ //DEBUG_ECHOLNPAIR(" tx almost full: ", x);
+ //DEBUG_ECHOPAIR(" update_ptr ", update_ptr);
+ ScreenComplete = false;
+ return; // please call again!
+ }
+ }
+
+ } while (++update_ptr, ++VPList, true);
+}
+
+void DGUSDisplay::loop() {
+ // protection against recursion… ProcessRx() might call indirectly idle() when trying to injecting gcode commands if the queue is full.
+ if (!no_reentrance) {
+ no_reentrance = true;
+ ProcessRx();
+ no_reentrance = false;
+ }
+}
+
+void DGUSDisplay::InitDisplay() {
+ RequestScreen(
+ #if ENABLED(SHOW_BOOTSCREEN)
+ DGUSLCD_SCREEN_BOOT
+ #else
+ DGUSLCD_SCREEN_MAIN
+ #endif
+ );
+}
+
+void DGUSDisplay::WriteVariable(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) {
+ const char* myvalues = static_cast(values);
+ bool strend = myvalues ? false : true;
+ WriteHeader(adr, DGUS_CMD_WRITEVAR, valueslen);
+ while (valueslen--) {
+ char x;
+ if (!strend) x = *myvalues++;
+ if ((isstr && !x) || strend) {
+ strend = true;
+ x = ' ';
+ }
+ dgusserial.write(x);
+ }
+}
+
+void DGUSDisplay::WriteVariablePGM(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) {
+ const char* myvalues = static_cast(values);
+ bool strend = myvalues ? false : true;
+ WriteHeader(adr, DGUS_CMD_WRITEVAR, valueslen);
+ while (valueslen--) {
+ char x;
+ if (!strend) x = pgm_read_byte(myvalues++);
+ if ((isstr && !x) || strend) {
+ strend = true;
+ x = ' ';
+ }
+ dgusserial.write(x);
+ }
+}
+
+void DGUSScreenVariableHandler::GotoScreen(DGUSLCD_Screens screen, bool ispopup) {
+ dgusdisplay.RequestScreen(screen);
+ UpdateNewScreen(screen, ispopup);
+}
+
+bool DGUSScreenVariableHandler::loop() {
+ dgusdisplay.loop();
+
+ const millis_t ms = millis();
+ static millis_t next_event_ms = 0;
+
+ if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) {
+ next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS;
+ UpdateScreenVPData();
+ }
+
+ #if ENABLED(SHOW_BOOTSCREEN)
+ static bool booted = false;
+ if (!booted && ELAPSED(ms, BOOTSCREEN_TIMEOUT)) {
+ booted = true;
+ GotoScreen(DGUSLCD_SCREEN_MAIN);
+ }
+ #endif
+ return IsScreenComplete();
+}
+
+void DGUSDisplay::RequestScreen(DGUSLCD_Screens screen) {
+ DEBUG_ECHOLNPAIR("GotoScreen ", screen);
+ const unsigned char gotoscreen[] = { 0x5A, 0x01, (unsigned char) (screen >> 8U), (unsigned char) (screen & 0xFFU) };
+ WriteVariable(0x84, gotoscreen, sizeof(gotoscreen));
+}
+
+void DGUSDisplay::ProcessRx() {
+
+ if (!dgusserial.available() && dgusserial.is_rx_overrun()) {
+ // if we've got an overrun, but reset the flag only when we've emptied the buffer
+ // We want to extract as many as valid datagrams possible...
+ DEBUG_ECHOPGM("OVFL");
+ rx_datagram_state = DGUS_IDLE;
+ dgusserial.reset_rx_overun();
+ }
+
+ uint8_t receivedbyte;
+ while (dgusserial.available()) {
+ switch (rx_datagram_state) {
+
+ case DGUS_IDLE: // Waiting for the first header byte
+ receivedbyte = dgusserial.read();
+ //DEBUG_ECHOPAIR("< ",x);
+ if (DGUS_HEADER1 == receivedbyte) rx_datagram_state = DGUS_HEADER1_SEEN;
+ break;
+
+ case DGUS_HEADER1_SEEN: // Waiting for the second header byte
+ receivedbyte = dgusserial.read();
+ //DEBUG_ECHOPAIR(" ",x);
+ rx_datagram_state = (DGUS_HEADER2 == receivedbyte) ? DGUS_HEADER2_SEEN : DGUS_IDLE;
+ break;
+
+ case DGUS_HEADER2_SEEN: // Waiting for the length byte
+ rx_datagram_len = dgusserial.read();
+ DEBUG_ECHOPAIR(" (", rx_datagram_len);
+ DEBUG_ECHOPGM(") ");
+
+ // Telegram min len is 3 (command and one word of payload)
+ rx_datagram_state = WITHIN(rx_datagram_len, 3, DGUS_RX_BUFFER_SIZE) ? DGUS_WAIT_TELEGRAM : DGUS_IDLE;
+ break;
+
+ case DGUS_WAIT_TELEGRAM: // wait for complete datagram to arrive.
+ if (dgusserial.available() < rx_datagram_len) return;
+
+ Initialized = true; // We've talked to it, so we defined it as initialized.
+ uint8_t command = dgusserial.read();
+
+ DEBUG_ECHOPAIR("# ", command);
+
+ uint8_t readlen = rx_datagram_len - 1; // command is part of len.
+ unsigned char tmp[rx_datagram_len - 1];
+ unsigned char *ptmp = tmp;
+ while (readlen--) {
+ receivedbyte = dgusserial.read();
+ DEBUG_ECHOPAIR(" ", receivedbyte);
+ *ptmp++ = receivedbyte;
+ }
+ DEBUG_ECHOPGM(" # ");
+ // mostly we'll get this: 5A A5 03 82 4F 4B -- ACK on 0x82, so discard it.
+ if (command == DGUS_CMD_WRITEVAR && 'O' == tmp[0] && 'K' == tmp[1]) {
+ DEBUG_ECHOLNPGM(">");
+ rx_datagram_state = DGUS_IDLE;
+ break;
+ }
+
+ /* AutoUpload, (and answer to) Command 0x83 :
+ | tmp[0 1 2 3 4 ... ]
+ | Example 5A A5 06 83 20 01 01 78 01 ……
+ | / / | | \ / | \ \
+ | Header | | | | \_____\_ DATA (Words!)
+ | DatagramLen / VPAdr |
+ | Command DataLen (in Words) */
+ if (command == DGUS_CMD_READVAR) {
+ const uint16_t vp = tmp[0] << 8 | tmp[1];
+ const uint8_t dlen = tmp[2] << 1; // Convert to Bytes. (Display works with words)
+ //DEBUG_ECHOPAIR(" vp=", vp); DEBUG_ECHOPAIR(" dlen=", dlen);
+ DGUS_VP_Variable ramcopy;
+ if (populate_VPVar(vp, &ramcopy)) {
+ if (!(dlen == ramcopy.size || (dlen == 2 && ramcopy.size == 1)))
+ DEBUG_ECHOLNPGM("SIZE MISMATCH");
+ else if (ramcopy.set_by_display_handler) {
+ ramcopy.set_by_display_handler(ramcopy, &tmp[3]);
+ }
+ else
+ DEBUG_ECHOLNPGM(" VPVar found, no handler.");
+ }
+ else
+ DEBUG_ECHOLNPAIR(" VPVar not found:", vp);
+
+ rx_datagram_state = DGUS_IDLE;
+ break;
+ }
+
+ // discard what we do not understand.
+ rx_datagram_state = DGUS_IDLE;
+ }
+ }
+}
+
+size_t DGUSDisplay::GetFreeTxBuffer() { return dgusserial.GetTxBufferFree(); }
+
+void DGUSDisplay::WriteHeader(uint16_t adr, uint8_t cmd, uint8_t payloadlen) {
+ dgusserial.write(DGUS_HEADER1);
+ dgusserial.write(DGUS_HEADER2);
+ dgusserial.write(payloadlen + 3);
+ dgusserial.write(cmd);
+ dgusserial.write(adr >> 8);
+ dgusserial.write(adr & 0xFF);
+}
+
+void DGUSDisplay::WritePGM(const char str[], uint8_t len) {
+ while (len--) dgusserial.write(pgm_read_byte(str++));
+}
+
+// Serial implementation stolen from MarlinSerial.cpp -- but functinality reduced to our use case
+// (no XON/XOFF, no Emergency Parser, no error statistics, no support to send from interrupts ...)
+
+// Define all UART registers
+#define _TNAME(X,Y,Z) X##Y##Z
+#define TNAME(X,Y,Z) _TNAME(X,Y,Z)
+#define DGUS_SERIAL_RX_VECT TNAME(USART,DGUS_SER_PORT,_RX_vect)
+#define DGUS_SERIAL_UDRE_VECT TNAME(USART,DGUS_SER_PORT,_UDRE_vect)
+#define DGUS_UCSRxA TNAME(UCSR,DGUS_SER_PORT,A)
+#define DGUS_UCSRxB TNAME(UCSR,DGUS_SER_PORT,B)
+#define DGUS_UCSRxC TNAME(UCSR,DGUS_SER_PORT,C)
+#define DGUS_UBRRxH TNAME(UBRR,DGUS_SER_PORT,H)
+#define DGUS_UBRRxL TNAME(UBRR,DGUS_SER_PORT,L)
+#define DGUS_UDRx TNAME(UDR,DGUS_SER_PORT,)
+
+#define U2Xx TNAME(U2X,DGUS_SER_PORT,)
+#define RXENx TNAME(RXEN,DGUS_SER_PORT,)
+#define TXENx TNAME(TXEN,DGUS_SER_PORT,)
+#define TXCx TNAME(TXC,DGUS_SER_PORT,)
+#define RXCIEx TNAME(RXCIE,DGUS_SER_PORT,)
+#define UDRIEx TNAME(UDRIE,DGUS_SER_PORT,)
+#define UDREx TNAME(UDRE,DGUS_SER_PORT,)
+
+// A SW memory barrier, to ensure GCC does not overoptimize loops
+#define sw_barrier() asm volatile("": : :"memory");
+
+DGUSSerial::DGUSSerial() {
+ // Initialize UART
+ DGUS_UCSRxA = 1 << U2Xx;
+ const uint16_t baud_setting = (F_CPU / 4 / DGUS_BAUDRATE - 1) / 2;
+ DGUS_UBRRxH = baud_setting >> 8;
+ DGUS_UBRRxL = baud_setting;
+ DGUS_UCSRxC = 0x06;
+ DGUS_UCSRxB = 1 << RXCIEx | 1 << TXENx | 1 << RXENx; // Enable TX,RX and the RX interrupts.
+}
+
+DGUSSerial::~DGUSSerial() { DGUS_UCSRxB = 0; }
+
+// "Atomically" read the RX head index value without disabling interrupts:
+// This MUST be called with RX interrupts enabled, and CAN'T be called
+// from the RX ISR itself!
+FORCE_INLINE r_ring_buffer_pos_t DGUSSerial::atomic_read_rx_head() {
+ #if RX_BUFFER_SIZE > 256
+ // Keep reading until 2 consecutive reads return the same value,
+ // meaning there was no update in-between caused by an interrupt.
+ // This works because serial RX interrupts happen at a slower rate
+ // than successive reads of a variable, so 2 consecutive reads with
+ // the same value means no interrupt updated it.
+ r_ring_buffer_pos_t vold, vnew = rx_buffer.head;
+ sw_barrier();
+ do {
+ vold = vnew;
+ vnew = rx_buffer.head;
+ sw_barrier();
+ } while (vold != vnew);
+ return vnew;
+ #else
+ // With an 8bit index, reads are always atomic. No need for special handling
+ return rx_buffer.head;
+ #endif
+}
+
+// Set RX tail index, taking into account the RX ISR could interrupt
+// the write to this variable in the middle - So a backup strategy
+// is used to ensure reads of the correct values.
+// -Must NOT be called from the RX ISR -
+FORCE_INLINE void DGUSSerial::atomic_set_rx_tail(r_ring_buffer_pos_t value) {
+ #if RX_BUFFER_SIZE > 256
+ // Store the new value in the backup
+ rx_tail_value_backup = value;
+ sw_barrier();
+ // Flag we are about to change the true value
+ rx_tail_value_not_stable = true;
+ sw_barrier();
+ // Store the new value
+ rx_buffer.tail = value;
+ sw_barrier();
+ // Signal the new value is completely stored into the value
+ rx_tail_value_not_stable = false;
+ sw_barrier();
+ #else
+ rx_buffer.tail = value;
+ #endif
+}
+
+// Get the RX tail index, taking into account the read could be
+// interrupting in the middle of the update of that index value
+// -Called from the RX ISR -
+FORCE_INLINE r_ring_buffer_pos_t DGUSSerial::atomic_read_rx_tail() {
+ #if RX_BUFFER_SIZE > 256
+ // If the true index is being modified, return the backup value
+ if (rx_tail_value_not_stable) return rx_tail_value_backup;
+ #endif
+ // The true index is stable, return it
+ return rx_buffer.tail;
+}
+
+// (called with RX interrupts disabled)
+FORCE_INLINE void DGUSSerial::store_rxd_char() {
+ // Get the tail - Nothing can alter its value while this ISR is executing, but there's
+ // a chance that this ISR interrupted the main process while it was updating the index.
+ // The backup mechanism ensures the correct value is always returned.
+ const r_ring_buffer_pos_t t = atomic_read_rx_tail();
+
+ // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
+ r_ring_buffer_pos_t h = rx_buffer.head;
+
+ // Get the next element
+ r_ring_buffer_pos_t i = (r_ring_buffer_pos_t) (h + 1) & (r_ring_buffer_pos_t) (DGUS_RX_BUFFER_SIZE - 1);
+
+ // Read the character from the USART
+ uint8_t c = DGUS_UDRx;
+
+ // If the character is to be stored at the index just before the tail
+ // (such that the head would advance to the current tail), the RX FIFO is
+ // full, so don't write the character or advance the head.
+ if (i != t) {
+ rx_buffer.buffer[h] = c;
+ h = i;
+ }
+ else
+ dgus_rx_overrun = true;
+
+ // Store the new head value - The main loop will retry until the value is stable
+ rx_buffer.head = h;
+}
+
+// (called with TX irqs disabled)
+FORCE_INLINE void DGUSSerial::tx_udr_empty_irq(void) {
+ // Read positions
+ uint8_t t = tx_buffer.tail;
+ const uint8_t h = tx_buffer.head;
+ // If nothing to transmit, just disable TX interrupts. This could
+ // happen as the result of the non atomicity of the disabling of RX
+ // interrupts that could end reenabling TX interrupts as a side effect.
+ if (h == t) {
+ CBI(DGUS_UCSRxB, UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+ return;
+ }
+
+ // There is something to TX, Send the next byte
+ const uint8_t c = tx_buffer.buffer[t];
+ t = (t + 1) & (DGUS_TX_BUFFER_SIZE - 1);
+ DGUS_UDRx = c;
+ tx_buffer.tail = t;
+
+ // Clear the TXC bit (by writing a one to its bit location).
+ // Ensures flush() won't return until the bytes are actually written/
+ SBI(DGUS_UCSRxA, TXCx);
+
+ // Disable interrupts if there is nothing to transmit following this byte
+ if (h == t) CBI(DGUS_UCSRxB, UDRIEx);
+}
+
+r_ring_buffer_pos_t DGUSSerial::available(void) {
+ const r_ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+ return (r_ring_buffer_pos_t) (DGUS_RX_BUFFER_SIZE + h - t) & (DGUS_RX_BUFFER_SIZE - 1);
+}
+
+int DGUSSerial::read() {
+ const r_ring_buffer_pos_t h = atomic_read_rx_head();
+
+ // Read the tail. Main thread owns it, so it is safe to directly read it
+ r_ring_buffer_pos_t t = rx_buffer.tail;
+
+ // If nothing to read, return now
+ if (h == t) return -1;
+
+ // Get the next char
+ const int v = rx_buffer.buffer[t];
+ t = (r_ring_buffer_pos_t) (t + 1) & (DGUS_RX_BUFFER_SIZE - 1);
+
+ // Advance tail - Making sure the RX ISR will always get an stable value, even
+ // if it interrupts the writing of the value of that variable in the middle.
+ atomic_set_rx_tail(t);
+ return v;
+}
+
+void DGUSSerial::write(const uint8_t c) {
+ // are we currently tranmitting? If not, we can just place the byte in UDR.
+ if (!TEST(DGUS_UCSRxB, UDRIEx) && TEST(DGUS_UCSRxA, UDREx)) {
+ DGUS_UDRx = c;
+ SBI(DGUS_UCSRxA, TXCx);
+ return;
+ }
+
+ const uint8_t i = (tx_buffer.head + 1) & (DGUS_TX_BUFFER_SIZE - 1);
+ while (i == tx_buffer.tail) sw_barrier();
+
+ // Store new char. head is always safe to move
+ tx_buffer.buffer[tx_buffer.head] = c;
+ tx_buffer.head = i;
+ SBI(DGUS_UCSRxB, UDRIEx); // Enable Interrupts to finish off.
+}
+
+t_ring_buffer_pos_t DGUSSerial::GetTxBufferFree() {
+ const t_ring_buffer_pos_t t = tx_buffer.tail, // next byte to send.
+ h = tx_buffer.head; // next pos for queue.
+ int ret = t - h - 1;
+ if (ret < 0) ret += DGUS_TX_BUFFER_SIZE + 1;
+ return ret;
+}
+
+ISR(DGUS_SERIAL_UDRE_VECT) { dgusserial.tx_udr_empty_irq(); }
+ISR(DGUS_SERIAL_RX_VECT) { dgusserial.store_rxd_char(); }
+
+#endif // DGUS_LCD
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h
new file mode 100644
index 000000000..4488a58f4
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h
@@ -0,0 +1,236 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/* DGUS implementation written by coldtobi in 2019 for Marlin */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#include "../../../../Marlin.h"
+#include "DGUSVPVariable.h"
+
+enum DGUSLCD_Screens : uint8_t;
+
+#define DEBUG_OUT ENABLED(DEBUG_DGUSLCD)
+#include "../../../../core/debug_out.h"
+
+typedef enum : uint8_t {
+ DGUS_IDLE, //< waiting for DGUS_HEADER1.
+ DGUS_HEADER1_SEEN, //< DGUS_HEADER1 received
+ DGUS_HEADER2_SEEN, //< DGUS_HEADER2 received
+ DGUS_WAIT_TELEGRAM, //< LEN received, Waiting for to receive all bytes.
+} rx_datagram_state_t;
+
+// Low-Level access to the display.
+class DGUSDisplay {
+public:
+
+ DGUSDisplay() = default;
+
+ static void InitDisplay();
+
+ // Variable access.
+ static void WriteVariable(uint16_t adr, const void* values, uint8_t valueslen, bool isstr=false);
+ static void WriteVariablePGM(uint16_t adr, const void* values, uint8_t valueslen, bool isstr=false);
+ template
+ static void WriteVariable(uint16_t adr, T value) {
+ WriteVariable(adr, static_cast(&value), sizeof(T));
+ }
+
+ // Until now I did not need to actively read from the display. That's why there is no ReadVariable
+ // (I extensively use the auto upload of the display)
+
+ // Force display into another screen.
+ // (And trigger update of containing VPs)
+ // (to implement a pop up message, which may not be nested)
+ static void RequestScreen(DGUSLCD_Screens screen);
+
+ // Periodic tasks, eg. Rx-Queue handling.
+ static void loop();
+
+public:
+ // Helper for users of this class to estimate if an interaction would be blocking.
+ static size_t GetFreeTxBuffer();
+
+ // Checks two things: Can we confirm the presence of the display and has we initiliazed it.
+ // (both boils down that the display answered to our chatting)
+ static inline bool isInitialized() { return Initialized; }
+
+private:
+ static void WriteHeader(uint16_t adr, uint8_t cmd, uint8_t payloadlen);
+ static void WritePGM(const char str[], uint8_t len);
+ static void ProcessRx();
+
+ static rx_datagram_state_t rx_datagram_state;
+ static uint8_t rx_datagram_len;
+ static bool Initialized, no_reentrance;
+};
+
+extern DGUSDisplay dgusdisplay;
+
+// compile-time x^y
+constexpr float cpow(const float x, const int y) { return y == 0 ? 1.0 : x * cpow(x, y - 1); }
+
+class DGUSScreenVariableHandler {
+public:
+ DGUSScreenVariableHandler() = default;
+
+ static bool loop();
+
+ /// Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
+ /// The bools specifing whether the strings are in RAM or FLASH.
+ static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+
+ static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+
+ /// "M117" Message -- msg is a RAM ptr.
+ static void setstatusmessage(const char* msg);
+ /// The same for messages from Flash
+ static void setstatusmessagePGM(PGM_P const msg);
+ // Callback for VP "Display wants to change screen on idle printer"
+ static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr);
+ // Callback for VP "Screen has been changed"
+ static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr);
+ // Callback for VP "All Heaters Off"
+ static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr);
+ // Hook for "Change this temperature"
+ static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr);
+ // Hook for "Change Flowrate"
+ static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr);
+ // Hook for manual move.
+ static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr);
+ // Hook for manual extrude.
+ static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr);
+
+ #if ENABLED(SDSUPPORT)
+ // Callback for VP "Display wants to change screen when there is a SD card"
+ static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr);
+ /// Scroll buttons on the file listing screen.
+ static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr);
+ /// File touched.
+ static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr);
+ /// start print after confirmation received.
+ static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr);
+ /// User hit the pause, resume or abort button.
+ static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr);
+ /// User confirmed the abort action
+ static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr);
+ /// Send a single filename to the display.
+ static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var);
+ /// Marlin informed us that a new SD has been inserted.
+ static void SDCardInserted();
+ /// Marlin informed us that the SD Card has been removed().
+ static void SDCardRemoved();
+ /// Marlin informed us about a bad SD Card.
+ static void SDCardError();
+ #endif
+
+ // OK Button the Confirm screen.
+ static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr);
+
+ // Update data after went to new screen (by display or by GotoScreen)
+ // remember: store the last-displayed screen, so it can get returned to.
+ // (e.g for pop up messages)
+ static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false);
+
+ // Recall the remembered screen.
+ static void PopToOldScreen();
+
+ // Make the display show the screen and update all VPs in it.
+ static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false);
+
+ static void UpdateScreenVPData();
+
+ // Helpers to convert and transfer data to the display.
+ static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var);
+ static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var);
+ static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var);
+ static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var);
+ static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var);
+
+ /// Send a value from 0..100 to a variable with a range from 0..255
+ static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr);
+
+ template
+ static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) {
+ if (!var.memadr) return;
+ union { unsigned char tmp[sizeof(T)]; T t; } x;
+ unsigned char *ptr = (unsigned char*)val_ptr;
+ for (uint8_t i = 0; i < sizeof(T); i++) x.tmp[i] = ptr[sizeof(T) - i - 1];
+ *(T*)var.memadr = x.t;
+ }
+
+ /// Send a float value to the display.
+ /// Display will get a 4-byte integer scaled to the number of digits:
+ /// Tell the display the number of digits and it cheats by displaying a dot between...
+ template
+ static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) {
+ if (var.memadr) {
+ float f = *(float *)var.memadr;
+ f *= cpow(10, decimals);
+ union { long l; char lb[4]; } endian;
+
+ char tmp[4];
+ endian.l = f;
+ tmp[0] = endian.lb[3];
+ tmp[1] = endian.lb[2];
+ tmp[2] = endian.lb[1];
+ tmp[3] = endian.lb[0];
+ dgusdisplay.WriteVariable(var.VP, tmp, 4);
+ }
+ }
+
+ /// Force an update of all VP on the current screen.
+ static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; }
+ /// Has all VPs sent to the screen
+ static inline bool IsScreenComplete() { return ScreenComplete; }
+
+ static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; }
+
+ static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; }
+
+private:
+ static DGUSLCD_Screens current_screen; ///< currently on screen
+ static constexpr uint8_t NUM_PAST_SCREENS = 4;
+ static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; ///< LIFO with past screens for the "back" button.
+
+ static uint8_t update_ptr; ///< Last sent entry in the VPList for the actual screen.
+ static uint16_t skipVP; ///< When updating the screen data, skip this one, because the user is interacting with it.
+ static bool ScreenComplete; ///< All VPs sent to screen?
+
+ static uint16_t ConfirmVP; ///< context for confirm screen (VP that will be emulated-sent on "OK").
+
+ #if ENABLED(SDSUPPORT)
+ static int16_t top_file; ///< file on top of file chooser
+ static int16_t file_to_print; ///< touched file to be confirmed
+ #endif
+
+ static void (*confirm_action_cb)();
+};
+
+extern DGUSScreenVariableHandler ScreenHandler;
+
+/// Find the flash address of a DGUS_VP_Variable for the VP.
+extern const DGUS_VP_Variable* DGUSLCD_FindVPVar(const uint16_t vp);
+
+/// Helper to populate a DGUS_VP_Variable for a given VP. Return false if not found.
+extern bool populate_VPVar(const uint16_t VP, DGUS_VP_Variable * const ramcopy);
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp
new file mode 100644
index 000000000..fdc8db67a
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp
@@ -0,0 +1,231 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/* DGUS implementation written by coldtobi in 2019 for Marlin */
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(DGUS_LCD)
+
+#include "DGUSDisplayDefinition.h"
+#include "DGUSDisplay.h"
+
+#include "../../../../module/temperature.h"
+#include "../../../../module/motion.h"
+
+#include "../../../ultralcd.h"
+
+const uint16_t VPList_Boot[] PROGMEM = {
+ VP_MARLIN_VERSION,
+ 0x0000
+};
+
+const uint16_t VPList_Main[] PROGMEM = {
+ /* VP_M117, for completeness, but it cannot be auto-uploaded. */
+ 0x0000
+};
+
+const uint16_t VPList_Temp[] PROGMEM = {
+ #if HOTENDS >= 1
+ VP_T_E1_Is, VP_T_E1_Set,
+ #endif
+ #if HOTENDS >= 2
+ VP_T_E2_I, VP_T_E2_S,
+ #endif
+ #if HAS_HEATED_BED
+ VP_T_Bed_Is, VP_T_Bed_Set,
+ #endif
+ 0x0000
+};
+
+const uint16_t VPList_Status[] PROGMEM = {
+ /* VP_M117, for completeness, but it cannot be auto-uploaded */
+ #if HOTENDS >= 1
+ VP_T_E1_Is, VP_T_E1_Set,
+ #endif
+ #if HOTENDS >= 2
+ VP_T_E2_I, VP_T_E2_S,
+ #endif
+ #if HAS_HEATED_BED
+ VP_T_Bed_Is, VP_T_Bed_Set,
+ #endif
+ #if FAN_COUNT > 0
+ VP_Fan_Percentage,
+ #endif
+ VP_XPos, VP_YPos, VP_ZPos,
+ VP_Fan_Percentage,
+ VP_Feedrate_Percentage,
+ VP_PrintProgress_Percentage,
+ 0x0000
+};
+
+const uint16_t VPList_Status2[] PROGMEM = {
+ /* VP_M117, for completeness, but it cannot be auto-uploaded */
+ #if HOTENDS >= 1
+ VP_Flowrate_E1,
+ #endif
+ #if HOTENDS >= 2
+ VP_Flowrate_E2,
+ #endif
+ VP_PrintProgress_Percentage,
+ VP_PrintTime,
+ 0x0000
+};
+
+const uint16_t VPList_ManualMove[] PROGMEM = {
+ VP_XPos, VP_YPos, VP_ZPos,
+ 0x0000
+};
+
+const uint16_t VPList_ManualExtrude[] PROGMEM = {
+ VP_EPos,
+ 0x0000
+};
+
+const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
+ VP_Feedrate_Percentage, VP_Fan_Percentage,
+ 0x0000
+};
+
+const uint16_t VPList_SD_FlowRates[] PROGMEM = {
+ VP_Flowrate_E1, VP_Flowrate_E2,
+ 0x0000
+};
+
+const uint16_t VPList_SDFileList[] PROGMEM = {
+ VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4,
+ 0x0000
+};
+
+const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
+ VP_PrintProgress_Percentage, VP_PrintTime,
+ 0x0000
+};
+
+const struct VPMapping VPMap[] PROGMEM = {
+ { DGUSLCD_SCREEN_BOOT, VPList_Boot },
+ { DGUSLCD_SCREEN_MAIN, VPList_Main },
+ { DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
+ { DGUSLCD_SCREEN_STATUS, VPList_Status },
+ { DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
+ { DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
+ { DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
+ { DGUSLCD_SCREEN_FANANDFEEDRATE, VPList_FanAndFeedrate },
+ { DGUSLCD_SCREEN_FLOWRATES, VPList_SD_FlowRates },
+ { DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation },
+ { DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
+ { 0 , nullptr } // List is terminated with an nullptr as table entry.
+};
+
+const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
+
+// Helper to define a DGUS_VP_Variable for common use cases.
+#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
+ .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
+
+// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
+#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
+ .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
+
+const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
+ // Helper to detect touch events
+ VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr),
+ VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr),
+ VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr),
+ VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr),
+
+ VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr),
+
+ VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
+ VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
+ VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
+ VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
+
+ { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
+ // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
+ { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay },
+
+ // Temperature Data
+ #if HOTENDS >= 1
+ VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[0].current, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+ VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
+ VPHELPER(VP_Flowrate_E1, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
+ VPHELPER(VP_EPos, &destination[3], nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
+ VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
+ #endif
+ #if HOTENDS >= 2
+ VPHELPER(VP_T_E2_I, &thermalManager.temp_hotend[1].current, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+ VPHELPER(VP_T_E2_S, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
+ VPHELPER(VP_Flowrate_E2, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
+ VPHELPER(VP_MOVE_E2, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
+ #endif
+ #if HOTENDS >= 3
+ #error More than 2 Hotends currently not implemented on the Display UI design.
+ #endif
+ #if HAS_HEATED_BED
+ VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.current, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+ VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
+ #endif
+
+ // Fan Data.
+ #if FAN_COUNT > 0
+ VPHELPER(VP_Fan_Percentage, &thermalManager.fan_speed[0], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay),
+ #endif
+
+ // Feedrate.
+ VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
+
+ // Position Data.
+ VPHELPER(VP_XPos, ¤t_position[0], nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
+ VPHELPER(VP_YPos, ¤t_position[1], nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
+ VPHELPER(VP_ZPos, ¤t_position[2], nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
+
+ // Print Progress.
+ VPHELPER(VP_PrintProgress_Percentage, &MarlinUI::progress_bar_percent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
+
+ // Print Time
+ VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ),
+
+ // SDCard File listing.
+ #if ENABLED(SDSUPPORT)
+ VPHELPER(VP_SD_ScrollEvent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist, nullptr),
+ VPHELPER(VP_SD_FileSelected, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected, nullptr),
+ VPHELPER(VP_SD_FileSelectConfirm, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint, nullptr),
+ VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
+ VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
+ VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
+ VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
+ VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
+ VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr),
+ VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr),
+ #endif
+
+ // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
+ { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
+ { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
+ { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
+ { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
+
+ VPHELPER(0, 0, 0, 0) // must be last entry.
+};
+
+#endif // DGUS_LCD
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h
new file mode 100644
index 000000000..877f6ee86
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h
@@ -0,0 +1,192 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/* DGUS implementation written by coldtobi in 2019 for Marlin */
+
+#include "DGUSVPVariable.h"
+
+// This file defines the interaction between Marlin and the display firmware.
+
+// information on which screen which VP is displayed
+// As this is a sparse table, two arrays are needed:
+// one to list the VPs of one screen and one to map screens to the lists.
+// (Strictly this would not be necessary, but allows to only send data the display needs and reducing load on Marlin)
+struct VPMapping {
+ const uint8_t screen;
+ const uint16_t *VPList; // The list is null-terminated.
+};
+
+extern const struct VPMapping VPMap[];
+
+enum DGUSLCD_Screens : uint8_t {
+ DGUSLCD_SCREEN_BOOT = 0,
+ DGUSLCD_SCREEN_MAIN = 10,
+ DGUSLCD_SCREEN_TEMPERATURE = 20,
+ DGUSLCD_SCREEN_STATUS = 30,
+ DGUSLCD_SCREEN_STATUS2 = 32,
+ DGUSLCD_SCREEN_MANUALMOVE = 40,
+ DGUSLCD_SCREEN_MANUALEXTRUDE=42,
+ DGUSLCD_SCREEN_FANANDFEEDRATE = 44,
+ DGUSLCD_SCREEN_FLOWRATES = 46,
+ DGUSLCD_SCREEN_SDFILELIST = 50,
+ DGUSLCD_SCREEN_SDPRINTMANIPULATION = 52,
+ DGUSLCD_SCREEN_CONFIRM = 240,
+ DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
+ DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
+ DGUSLDC_SCREEN_UNUSED = 255
+};
+
+// Display Memory layout used (T5UID)
+// Except system variables this is arbitrary, just to organize stuff....
+
+// 0x0000 .. 0x0FFF -- System variables and reserved by the display
+// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
+// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
+// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
+// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
+
+// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
+// so that we can keep variables nicely together in the address space.
+
+// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
+constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
+constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
+constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
+constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
+
+// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
+constexpr uint16_t VP_MSGSTR1 = 0x1100;
+constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
+constexpr uint16_t VP_MSGSTR2 = 0x1140;
+constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
+constexpr uint16_t VP_MSGSTR3 = 0x1180;
+constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
+constexpr uint16_t VP_MSGSTR4 = 0x11C0;
+constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
+
+// Screenchange request for screens that only make sense when printer is idle.
+// e.g movement is only allowed if printer is not printing.
+// Marlin must confirm by setting the screen manually.
+constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
+constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
+constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
+constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
+
+constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
+
+// Buttons on the SD-Card File listing.
+constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
+constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
+constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
+
+constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
+constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
+
+// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
+// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
+// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
+// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
+constexpr uint16_t VP_MOVE_X = 0x2100;
+constexpr uint16_t VP_MOVE_Y = 0x2102;
+constexpr uint16_t VP_MOVE_Z = 0x2104;
+constexpr uint16_t VP_MOVE_E1 = 0x2110;
+constexpr uint16_t VP_MOVE_E2 = 0x2112;
+//constexpr uint16_t VP_MOVE_E3 = 0x2114;
+//constexpr uint16_t VP_MOVE_E4 = 0x2116;
+//constexpr uint16_t VP_MOVE_E5 = 0x2118;
+//constexpr uint16_t VP_MOVE_E6 = 0x211A;
+constexpr uint16_t VP_HOME_ALL = 0x2120;
+
+// Firmware version on the boot screen.
+constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
+constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
+
+// Place for status messages.
+constexpr uint16_t VP_M117 = 0x3020;
+constexpr uint8_t VP_M117_LEN = 0x20;
+
+// Temperatures.
+constexpr uint16_t VP_T_E1_Is = 0x3060; // 4 Byte Integer
+constexpr uint16_t VP_T_E1_Set = 0x3062; // 2 Byte Integer
+constexpr uint16_t VP_T_E2_Is = 0x3064; // 4 Byte Integer
+
+// reserved to support up to 6 Extruders:
+//constexpr uint16_t VP_T_E2_Set = 0x3066; // 2 Byte Integer
+//constexpr uint16_t VP_T_E3_Is = 0x3068; // 4 Byte Integer
+//constexpr uint16_t VP_T_E3_Set = 0x306A; // 2 Byte Integer
+//constexpr uint16_t VP_T_E4_Is = 0x306C; // 4 Byte Integer
+//constexpr uint16_t VP_T_E4_Set = 0x306E; // 2 Byte Integer
+//constexpr uint16_t VP_T_E5_Is = 0x3070; // 4 Byte Integer
+//constexpr uint16_t VP_T_E5_Set = 0x3072; // 2 Byte Integer
+//constexpr uint16_t VP_T_E5_Is = 0x3074; // 4 Byte Integer
+//constexpr uint16_t VP_T_E5_Set = 0x3076; // 2 Byte Integer
+//constexpr uint16_t VP_T_E6_Is = 0x3078; // 4 Byte Integer
+//constexpr uint16_t VP_T_E6_Set = 0x307A; // 2 Byte Integer
+
+constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
+constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
+
+constexpr uint16_t VP_Flowrate_E1 = 0x3090; // 2 Byte Integer
+constexpr uint16_t VP_Flowrate_E2 = 0x3092; // 2 Byte Integer
+
+// reserved for up to 6 Extruders:
+//constexpr uint16_t VP_Flowrate_E3 = 0x3094;
+//constexpr uint16_t VP_Flowrate_E4 = 0x3096;
+//constexpr uint16_t VP_Flowrate_E5 = 0x3098;
+//constexpr uint16_t VP_Flowrate_E6 = 0x309A;
+
+constexpr uint16_t VP_Fan_Percentage = 0x3100; // 2 Byte Integer (0..100)
+constexpr uint16_t VP_Feedrate_Percentage = 0x3102; // 2 Byte Integer (0..100)
+constexpr uint16_t VP_PrintProgress_Percentage = 0x3104; // 2 Byte Integer (0..100)
+
+constexpr uint16_t VP_PrintTime = 0x3106;
+constexpr uint16_t VP_PrintTime_LEN = 10;
+
+// Actual Position
+constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
+constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
+constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
+
+constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
+
+// SDCard File Listing
+constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
+constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there.
+constexpr uint16_t VP_SD_FileName0 = 0x3200;
+constexpr uint16_t VP_SD_FileName1 = 0x3220;
+constexpr uint16_t VP_SD_FileName2 = 0x3240;
+constexpr uint16_t VP_SD_FileName3 = 0x3260;
+constexpr uint16_t VP_SD_FileName4 = 0x3280;
+
+// SPs for certain variables...
+// located at 0x5000 and up
+// Not used yet!
+// This can be used e.g to make controls / data display invisible
+constexpr uint16_t SP_T_E1_Is = 0x5000;
+constexpr uint16_t SP_T_E1_Set = 0x5010;
+constexpr uint16_t SP_T_E2_Is = 0x5020;
+constexpr uint16_t SP_T_Bed_Is = 0x5030;
+constexpr uint16_t SP_T_Bed_Set = 0x5040;
+
+// List of VPs handled by Marlin / The Display.
+extern const struct DGUS_VP_Variable ListOfVP[];
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSVPVariable.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSVPVariable.h
new file mode 100644
index 000000000..fdf388d84
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSVPVariable.h
@@ -0,0 +1,47 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * DGUSVPVariable.h
+ *
+ * Created on: Feb 9, 2019
+ * Author: tobi
+ */
+
+struct DGUS_VP_Variable {
+ uint16_t VP;
+ void* memadr; // If nullptr, the value cannot be uploaded to the display.
+ uint8_t size;
+
+ // Callback that will be called if the display modified the value.
+ // nullptr makes it readonly for the display.
+ void (*set_by_display_handler)(DGUS_VP_Variable &var, void *val_ptr);
+ void (*send_to_display_handler)(DGUS_VP_Variable &var);
+
+ template
+ DGUS_VP_Variable& operator =(T &o) {
+ *(T*)memadr = o; // warning this is not typesafe.
+ // TODO: Call out the display or mark as dirty for the next update.
+ return *this;
+ }
+};
diff --git a/Marlin/src/lcd/extui_dgus_lcd.cpp b/Marlin/src/lcd/extui_dgus_lcd.cpp
new file mode 100644
index 000000000..5d6d1d43a
--- /dev/null
+++ b/Marlin/src/lcd/extui_dgus_lcd.cpp
@@ -0,0 +1,81 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * extui_dgus_lcd.cpp
+ *
+ * DGUS implementation for Marlin by coldtobi, Feb-May 2019
+ */
+
+#include "../inc/MarlinConfigPre.h"
+
+#if ENABLED(DGUS_LCD)
+
+#include "extensible_ui/ui_api.h"
+#include "extensible_ui/lib/dgus/DGUSDisplay.h"
+#include "extensible_ui/lib/dgus/DGUSDisplayDefinition.h"
+
+namespace ExtUI {
+
+ void onStartup() {
+ dgusdisplay.InitDisplay();
+ ScreenHandler.UpdateScreenVPData();
+ }
+
+ void onIdle() { ScreenHandler.loop(); }
+
+ void onPrinterKilled(const char* msg) {
+ ScreenHandler.sendinfoscreen(PSTR(MSG_HALTED), msg, PSTR(""), PSTR(MSG_PLEASE_RESET), true, true, true, true);
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_KILL);
+ while (!ScreenHandler.loop()); // Wait while anything is left to be sent
+ }
+
+ void onMediaInserted() { ScreenHandler.SDCardInserted(); }
+ void onMediaError() { ScreenHandler.SDCardError(); }
+ void onMediaRemoved() { ScreenHandler.SDCardRemoved(); }
+
+ void onPlayTone(const uint16_t frequency, const uint16_t duration) {}
+ void onPrintTimerStarted() {}
+ void onPrintTimerPaused() {}
+ void onPrintTimerStopped() {}
+ void onFilamentRunout() {}
+
+ void onUserConfirmRequired(const char *msg) {
+ if (msg) {
+ ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true);
+ ScreenHandler.SetupConfirmAction(ExtUI::setUserConfirmed);
+ ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP);
+ }
+ else if (ScreenHandler.getCurrentScreen() == DGUSLCD_SCREEN_POPUP ) {
+ ScreenHandler.SetupConfirmAction(nullptr);
+ ScreenHandler.PopToOldScreen();
+ }
+ }
+
+ void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); }
+
+ void onFactoryReset() {}
+ void onLoadSettings() {}
+ void onStoreSettings() {}
+}
+
+#endif // DGUS_LCD
diff --git a/Marlin/src/lcd/extensible_ui/lib/example.cpp b/Marlin/src/lcd/extui_example.cpp
similarity index 96%
rename from Marlin/src/lcd/extensible_ui/lib/example.cpp
rename to Marlin/src/lcd/extui_example.cpp
index 5a52e2678..1bcfea60d 100644
--- a/Marlin/src/lcd/extensible_ui/lib/example.cpp
+++ b/Marlin/src/lcd/extui_example.cpp
@@ -1,6 +1,6 @@
-/***************
- * example.cpp *
- ***************/
+/*********************
+ * extui_example.cpp *
+ *********************/
/****************************************************************************
* Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
@@ -19,11 +19,11 @@
* location: . *
****************************************************************************/
-#include "../../../inc/MarlinConfigPre.h"
+#include "../inc/MarlinConfigPre.h"
#if BOTH(EXTUI_EXAMPLE, EXTENSIBLE_UI)
-#include "../ui_api.h"
+#include "extensible_ui/ui_api.h"
// To implement a new UI, complete the functions below and
// read or update Marlin's state using the methods in the
diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/extui_malyan_lcd.cpp
similarity index 99%
rename from Marlin/src/lcd/malyanlcd.cpp
rename to Marlin/src/lcd/extui_malyan_lcd.cpp
index ea474d0b9..657b00158 100644
--- a/Marlin/src/lcd/malyanlcd.cpp
+++ b/Marlin/src/lcd/extui_malyan_lcd.cpp
@@ -21,7 +21,7 @@
*/
/**
- * malyanlcd.cpp
+ * extui_malyan_lcd.cpp
*
* LCD implementation for Malyan's LCD, a separate ESP8266 MCU running
* on Serial1 for the M200 board. This module outputs a pseudo-gcode
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index da5dba0df..d9e2e40ca 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 07692df77..688c7908d 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1994,12 +1994,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2016,15 +2027,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index aba85d18f..abf753a52 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1983,12 +1983,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2005,15 +2016,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 91e621dd1..3a8d369d2 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 8cc78ee20..86c4b3a03 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1974,12 +1974,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1996,15 +2007,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index b0251ec48..e7b1111b0 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -1965,12 +1965,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1987,15 +1998,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 4728d7f32..e0741dfbd 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -1965,12 +1965,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1987,15 +1998,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 62c0b1877..79c7b7ba9 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -2116,12 +2116,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2138,15 +2149,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 6d05bb737..91cfe6c47 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -1978,12 +1978,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2000,15 +2011,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index dbf1f74e2..5f4d89ca1 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -1974,12 +1974,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1996,15 +2007,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index db6958676..84beb9879 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -1975,12 +1975,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1997,15 +2008,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 4246386c8..9496a3684 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -1973,12 +1973,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1995,15 +2006,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index ef68366eb..ab20f4601 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -1964,12 +1964,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1986,15 +1997,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index da5314c11..a877b0763 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 79f09bb2a..03d7a61e6 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 00f417aee..47a08a58b 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 6a1b4e64d..34abda38f 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -1951,12 +1951,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1973,15 +1984,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index a65908249..d6221aae4 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index d2f43e4de..3639d7829 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -1951,12 +1951,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1973,15 +1984,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 9d481317c..377e6bcb4 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -1962,12 +1962,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1984,15 +1995,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 590e3c822..a1e13e348 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -1973,12 +1973,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1995,15 +2006,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index df07250c8..a4f5ad817 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -1964,12 +1964,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1986,15 +1997,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 8910bcfca..038745465 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -1966,12 +1966,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1988,15 +1999,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index 86fe27f25..5ef327d9a 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -1982,12 +1982,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2004,15 +2015,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index 4ac6c2d1e..73a12d552 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -1973,12 +1973,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1995,15 +2006,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 8943ab255..4cabda682 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 7b723c75c..f4faddef1 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 2377eed48..56ba158f4 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -1973,12 +1973,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1995,15 +2006,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index cd992fb0e..49f92cae7 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index b6f9f63b6..7d934119d 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -1968,12 +1968,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1990,15 +2001,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index ce4a2512c..18b348068 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -1973,12 +1973,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2000,15 +2011,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 324c88499..e59c248a1 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -1945,12 +1945,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1967,15 +1978,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index ad262f50f..eb3f55911 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -1945,12 +1945,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1967,15 +1978,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index c34f2f02b..546d62d2b 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -1954,12 +1954,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1976,15 +1987,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 332f95fd8..5939aa309 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1969,12 +1969,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1991,15 +2002,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 96450fdb0..788789328 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -2068,12 +2068,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2090,15 +2101,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 2522610f2..f14706c2a 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -1997,12 +1997,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2019,15 +2030,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index f6216c001..52b295e51 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -1991,12 +1991,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2013,15 +2024,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index c6fd16011..53b8f620f 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -1948,12 +1948,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1970,15 +1981,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 184ac7cce..7f1954769 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -1948,12 +1948,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1970,15 +1981,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index ebfaaa864..983459435 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -1950,12 +1950,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1972,15 +1983,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 7e9220a65..cdb3e1532 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -1978,12 +1978,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2000,15 +2011,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 27818b18a..b9bcb66c0 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 0cb7aa710..76b8d98da 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -1970,12 +1970,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1992,15 +2003,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 9c7117428..cdf6cb578 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -1984,12 +1984,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2006,15 +2017,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index e1c8fc7a6..2a5958a0f 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -1983,12 +1983,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2005,15 +2016,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 2da088d6b..3faef01a9 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index cfbbcc84e..53feea1fd 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 76d1368b0..120e377c8 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 289b8f7d0..e2e050ca5 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -1966,12 +1966,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1988,15 +1999,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 7ce81ca79..92d30172f 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1975,12 +1975,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1997,15 +2008,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index c66d047d3..46c864216 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -1966,12 +1966,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index a552af307..99ab7673a 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -1983,12 +1983,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2005,15 +2016,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 93a1654eb..0d0bc1799 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -1991,12 +1991,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2013,15 +2024,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 326e1d81c..1702c72d4 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -1962,12 +1962,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 4eed444f4..97e0dd041 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index af1ed76fb..2218578a4 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index bee8571f9..09ab59965 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -1965,12 +1965,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1987,15 +1998,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index 9300dc421..b21ce2297 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index c899f589b..53f73fd91 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -1971,12 +1971,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1993,15 +2004,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index ea7468d20..429ac8a3e 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index aa4b467f8..f6c5b9947 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -2012,12 +2012,23 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2034,15 +2045,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 1bca2782b..f26aa1459 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 24d088a26..459d1da8a 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 4d7bbf3bb..1a0723981 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -1976,12 +1976,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1998,15 +2009,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 86724b3ab..841f03abb 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 744167cae..5bf3f01cc 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -1965,12 +1965,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1987,15 +1998,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 3ddff4ba2..713362d23 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 6cc9d32fb..71f8ba430 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -1965,12 +1965,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1987,15 +1998,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 0081935f7..ce3406846 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -1994,12 +1994,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2016,15 +2027,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index d8c69f8f5..dd35423c3 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -1968,12 +1968,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1990,15 +2001,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 24585d150..8e9da346d 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index d238fbfcf..78b3d5e81 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -2019,12 +2019,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2041,15 +2052,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 9ad56a5db..27e83429d 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 445db5dda..2eaac63a9 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -1967,12 +1967,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1989,15 +2000,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index cdb703f38..4bda134d7 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -1984,12 +1984,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2006,15 +2017,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 3fc703a21..88f23a4e8 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index dd60ef451..4d91a3878 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1974,12 +1974,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1996,15 +2007,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 9afc26938..b8d200c5b 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 8957bfe77..159fdfbb9 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index d471caa05..a39618539 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -1972,12 +1972,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1994,15 +2005,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 6f5053186..a4994adce 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -1998,12 +1998,23 @@
#endif // K8200_VM8201
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2020,15 +2031,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 0de363348..86323477d 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 01ce82eed..c08c28205 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 7091a7708..55885db94 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -1982,12 +1982,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2004,15 +2015,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index acf84d23c..2294569f9 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -1976,12 +1976,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1998,15 +2009,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 88b206977..8ead1fb15 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -1963,12 +1963,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1985,15 +1996,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 65c4bb383..6d66a9182 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -2151,12 +2151,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2173,15 +2184,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 17363403e..aceecfb34 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -2091,12 +2091,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2113,15 +2124,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index cd8722329..c6a00fb08 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -2090,12 +2090,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2112,15 +2123,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index d7a25c919..4eb1983a6 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -2090,12 +2090,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2112,15 +2123,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 09f8b0042..852642dea 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -2078,12 +2078,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2100,15 +2111,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 4d011c9a0..b61040003 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -2093,12 +2093,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2115,15 +2126,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index c532ca34f..a52f2b4ae 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -2078,12 +2078,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2100,15 +2111,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index d9386f969..3fb1f12fa 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -2082,12 +2082,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2104,15 +2115,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 0a23a4fa5..cbe17c817 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -2078,12 +2078,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2100,15 +2111,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 6d0915612..b99e1e41d 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -2080,12 +2080,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2102,15 +2113,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index b59a23b6b..4cd329fad 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -2081,12 +2081,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2103,15 +2114,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 288fdbddb..f717d1b09 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -2081,12 +2081,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -2103,15 +2114,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 56dc37714..389a8a6db 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1977,12 +1977,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1999,15 +2010,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index ab89f5157..e8706996d 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -1966,12 +1966,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1988,15 +1999,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 18a1ac0c2..c1e432d1e 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -1958,12 +1958,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1980,15 +1991,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index 62ff13331..417880867 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -1968,12 +1968,23 @@
//
//#define SILVER_GATE_GLCD_CONTROLLER
+//=============================================================================
+//========================== Extensible UI Displays ===========================
+//=============================================================================
+
//
-// Extensible UI
+// DGUS Touch Display with DWIN OS
//
-// Enable third-party or vendor customized user interfaces that aren't
-// packaged with Marlin. Source code for the user interface will need to
-// be placed in "src/lcd/extensible_ui/lib"
+//#define DGUS_LCD
+
+//
+// Touch-screen LCD for Malyan M200 printers
+//
+//#define MALYAN_LCD
+
+//
+// Third-party or vendor-customized controller interfaces.
+// Sources should be installed in 'src/lcd/extensible_ui'.
//
//#define EXTENSIBLE_UI
@@ -1990,15 +2001,6 @@
//============================ Other Controllers ============================
//=============================================================================
-//
-// CONTROLLER TYPE: Standalone / Serial
-//
-
-//
-// LCD for Malyan M200 printers.
-//
-//#define MALYAN_LCD
-
//
// CONTROLLER TYPE: Keypad / Add-on
//