Merge pull request #9188 from thinkyhead/bf2_creality_ender

[2.0.x] Add Creality Ender config/board

Marlin/src/Makefile

@@ -176,6 +176,9 @@ MCU              ?= atmega1284p
 else ifeq  ($(HARDWARE_MOTHERBOARD),69)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
+else ifeq  ($(HARDWARE_MOTHERBOARD),601)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
 
 #Ultimaker
 else ifeq  ($(HARDWARE_MOTHERBOARD),7)

Marlin/src/config/examples/Creality/Ender/README.md

@@ -0,0 +1,18 @@
+# Creality Ender Support
+
+This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
+
+* 1.0.0 had very different serial output in `setup()` and overall code structure.
+* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
+
+Configurations were found by seeing what code was compiled into the firmware, and constants used there.
+
+For U8Glib, at least version 1.14 and at most 1.17 is used, because
+
+* 1.12 didn't have the extra speed argument to u8g_InitCom.
+* 1.13 didn't have the soft reset instruction for UC1701 initialization.
+* 1.18 has a new directory structure.
+
+## Bitmaps
+
+The bootscreen and custom status screens come from Creality's firmware.

Marlin/src/config/examples/Creality/Ender/_Bootscreen.h

@@ -0,0 +1,74 @@
+#ifndef BOOTSCREEN_H_
+#define BOOTSCREEN_H_
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000  // milliseconds
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 128  // Width in pixels
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64  // Height in pixels
+const unsigned char custom_start_bmp[] PROGMEM = {
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF3,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xE1,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFE,0x78,0x00,0x00,0x03,0xDD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFE,0xFF,0x80,0x7E,0x00,0x01,0xEE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFE,0x7D,0xCF,0xFC,0x00,0x00,0xF7,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x8E,0x06,0x00,0x00,0x00,0x7B,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x7D,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFC,0x01,0xFE,0x00,0x00,0x3E,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x03,0x1F,0x73,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF8,0x00,0x01,0x8F,0x81,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x00,0x00,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFC,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x0F,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x07,0xC0,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x07,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x07,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x03,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8E,0x03,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x80,0x00,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x87,0xFD,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x87,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x0F,0xE7,0xF3,0x0F,0xFC,0x23,0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0x0F,0xEF,0x80,0x07,0xF0,0x03,0xF0,0x1E,0x00,0x7F,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFE,0x1F,0xCF,0x81,0x87,0xC7,0x87,0xC7,0x0C,0x00,0x7F,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xC7,0xC7,0x8F,0xC7,0x9F,0x0F,0x0C,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0x87,0x8F,0x1F,0x8F,0x1F,0x0F,0x1F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFC,0x3F,0x9F,0x8F,0x8F,0x1F,0x8E,0x00,0x1E,0x3F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFC,0x7F,0x3F,0x0F,0x1E,0x3F,0x1E,0x3F,0xFE,0x3F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0x1F,0x1C,0x3F,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x1E,0x1C,0x7E,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xF0,0xFF,0xCE,0x3E,0x3C,0x7E,0x3C,0x7F,0xB8,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xF0,0xFF,0x9E,0x3C,0x38,0x7C,0x38,0x7E,0x78,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xE1,0xFF,0x3C,0x7C,0x78,0x7C,0x78,0x3C,0xF1,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xE1,0xF8,0x38,0x78,0x78,0x10,0x18,0x01,0xF1,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0x00,0x00,0x60,0x20,0x3C,0x00,0x7C,0x07,0x80,0x7F,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x1F,0xFE,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
+};
+
+#endif // BOOTSCREEN_H_

Marlin/src/config/examples/Creality/Ender/_Statusscreen.h

@@ -0,0 +1,54 @@
+#ifndef STATUSSCREEN_H_
+#define STATUSSCREEN_H_
+
+#define STATUS_SCREENWIDTH 128 // Width in pixels
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+  0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+  0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+  0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+  0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+  0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+  0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
+  0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+  0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+  0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
+  0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
+  0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+  0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+  0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+};
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+  0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+  0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+  0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+  0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+  0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+  0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
+  0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
+  0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
+  0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
+  0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
+  0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+  0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+  0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+};
+
+#define STATUS_SCREEN_X 0
+#define STATUS_SCREEN_HOTEND_TEXT_X(i) (39 + (i) * 25)
+#define STATUS_SCREEN_BED_TEXT_X 72
+#define STATUS_SCREEN_FAN_TEXT_X 103
+
+#endif // STATUSSCREEN_H_

Marlin/src/core/boards.h

@@ -115,6 +115,7 @@
 #define BOARD_MELZI_MAKR3D      66    // Melzi with ATmega1284 (MaKr3d version)
 #define BOARD_MELZI_CREALITY    89    // Melzi Creality3D board (for CR-10 etc)
 #define BOARD_MELZI_MALYAN      92    // Melzi Malyan M150 board
+#define BOARD_CREALITY_ENDER    601   // Creality Ender
 #define BOARD_STB_11            64    // STB V1.1
 #define BOARD_AZTEEG_X1         65    // Azteeg X1
 

Marlin/src/lcd/dogm/dogm_bitmaps.h

@@ -115,7 +115,14 @@
 // When only one extruder is selected, the "1" on the symbol will not
 // be displayed.
 
-#if HAS_TEMP_BED
+#ifdef CUSTOM_STATUS_SCREEN_FILE
+  #undef STATUS_SCREENWIDTH
+
+  // This file must define STATUS_SCREENWIDTH and status_screen{0,1}_bmp.
+  // It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and
+  // STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations.
+  #include CUSTOM_STATUS_SCREEN_FILE
+#elif HAS_TEMP_BED
   #if HOTENDS == 1
     #define STATUS_SCREENWIDTH     115 //Width in pixels
     #define STATUS_SCREENHEIGHT     19 //Height in pixels
@@ -513,3 +520,16 @@
   };
 
 #endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
+
+#ifndef STATUS_SCREEN_X
+  #define STATUS_SCREEN_X 9
+#endif
+#ifndef STATUS_SCREEN_HOTEND_TEXT_X
+  #define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25)
+#endif
+#ifndef STATUS_SCREEN_BED_TEXT_X
+  #define STATUS_SCREEN_BED_TEXT_X 81
+#endif
+#ifndef STATUS_SCREEN_FAN_TEXT_X
+  #define STATUS_SCREEN_FAN_TEXT_X 104
+#endif

Marlin/src/lcd/language/language_en.h

@@ -37,7 +37,7 @@
 #undef en
 
 #ifndef WELCOME_MSG
-  #define WELCOME_MSG                         MACHINE_NAME _UxGT(" ready.")
+  #define WELCOME_MSG                         MACHINE_NAME _UxGT(" Ready.")
 #endif
 #ifndef MSG_BACK
   #define MSG_BACK                            _UxGT("Back")

Marlin/src/lcd/ultralcd_impl_DOGM.h

@@ -324,7 +324,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
 
     u8g.firstPage();
     do {
-      u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
+      u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
       lcd_setFont(FONT_MENU);
       #ifndef STRING_SPLASH_LINE2
         u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
@@ -365,7 +365,6 @@ static void lcd_implementation_init() {
   #elif ENABLED(LCD_SCREEN_ROT_270)
     u8g.setRot270();  // Rotate screen by 270°
   #endif
-
 }
 
 // The kill screen is displayed for unrecoverable conditions
@@ -503,7 +502,9 @@ static void lcd_implementation_status_screen() {
 
   if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {
 
-    u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
+    u8g.drawBitmapP(
+      STATUS_SCREEN_X, 1,
+      (STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT,
       #if HAS_FAN0
         blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
       #else
@@ -519,11 +520,11 @@ static void lcd_implementation_status_screen() {
 
   if (PAGE_UNDER(28)) {
     // Extruders
-    HOTEND_LOOP() _draw_heater_status(5 + e * 25, e, blink);
+    HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink);
 
     // Heated bed
     #if HOTENDS < 4 && HAS_TEMP_BED
-      _draw_heater_status(81, -1, blink);
+      _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink);
     #endif
 
     #if HAS_FAN0
@@ -531,7 +532,7 @@ static void lcd_implementation_status_screen() {
         // Fan
         const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
         if (per) {
-          u8g.setPrintPos(104, 27);
+          u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, 27);
           lcd_print(itostr3(per));
           u8g.print('%');
         }

Marlin/src/pins/pins.h

@@ -195,6 +195,8 @@
   #include "pins_MELZI_CREALITY.h"    // ATmega644P, ATmega1284P
 #elif MB(MELZI_MALYAN)
   #include "pins_MELZI_MALYAN.h"      // ATmega644P, ATmega1284P
+#elif MB(CREALITY_ENDER)
+  #include "pins_CREALITY_ENDER.h"    // ATmega1284P
 #elif MB(STB_11)
   #include "pins_STB_11.h"            // ATmega644P, ATmega1284P
 #elif MB(AZTEEG_X1)

Marlin/src/pins/pins_BEAST.h

@@ -31,8 +31,6 @@
 #define DEFAULT_MACHINE_NAME "STM32F103RET6"
 #define BOARD_NAME "Marlin for STM32"
 
-#define LARGE_FLASH true
-
 // Enable I2C_EEPROM for testing
 #define I2C_EEPROM
 

Marlin/src/pins/pins_CHITU3D.h

@@ -31,8 +31,6 @@
 #define DEFAULT_MACHINE_NAME "STM32F103RET6"
 #define BOARD_NAME "Chitu3d Marlin"
 
-#define LARGE_FLASH true
-
 // Enable I2C_EEPROM for testing
 //#define I2C_EEPROM
 

Marlin/src/pins/pins_CREALITY_ENDER.h

@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Creality Ender pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  Creality Ender-2
+ *  Creality Ender-4
+ */
+
+#define BOARD_NAME "Creality Ender"
+
+#include "pins_SANGUINOLOLU_12.h"

Marlin/src/pins/pins_SANGUINOLOLU_11.h

@@ -114,7 +114,7 @@
 
 #endif
 
-#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
+#if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
   #define FAN_PIN           4 // Works for Panelolu2 too
 #endif
 
@@ -187,6 +187,11 @@
         #define DOGLCD_CS       17
         #define LCD_BACKLIGHT_PIN 28 // PA3
 
+      #elif MB(CREALITY_ENDER)
+
+        #define BEEPER_PIN      27
+        #define DOGLCD_CS       28
+
       #else // !MAKRPANEL
 
         #define DOGLCD_CS       29

Marlin/src/pins/pins_STM3R_MINI.h

@@ -31,8 +31,6 @@
 #define DEFAULT_MACHINE_NAME "STM3R Mini"
 #define BOARD_NAME "Marlin for STM32"
 
-#define LARGE_FLASH true
-
 // Enable I2C_EEPROM for testing
 #define I2C_EEPROM