Improve AVR arch detection

Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets More info: https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html
2017-09-23 21:25:28 -07:00 · 2017-09-23 21:25:28 -07:00 · f58ba3a64e
commit f58ba3a64e
parent 8089f73549
22 changed files with 30 additions and 30 deletions
--- a/Marlin/src/HAL/HAL.h
+++ b/Marlin/src/HAL/HAL.h
@ -23,7 +23,7 @@
 *
 * Supports platforms :
 *    ARDUINO_ARCH_SAM : For Arduino Due and other boards based on Atmel SAM3X8E
- *    ARDUINO_ARCH_AVR : For all Atmel AVR boards
+ *    __AVR__ : For all Atmel AVR boards
 */

 #ifndef _HAL_H
@ -77,7 +77,7 @@ void spiRead(uint8_t* buf, uint16_t nbyte);
 /** Write token and then write from 512 byte buffer to SPI (for SD card) */
 void spiSendBlock(uint8_t token, const uint8_t* buf);

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "HAL_AVR/HAL_AVR.h"
 #elif defined(ARDUINO_ARCH_SAM)
  #define CPU_32_BIT
--- a/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp
@ -23,11 +23,11 @@
 /**
 * Description: HAL for AVR
 *
- * For ARDUINO_ARCH_AVR
+ * For __AVR__
 */


-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 // --------------------------------------------------------------------------
 // Includes
--- a/Marlin/src/HAL/HAL_AVR/HAL_AVR.h
+++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.h
@ -22,7 +22,7 @@
 /**
 * Description: HAL for AVR
 *
- * For ARDUINO_ARCH_AVR
+ * For __AVR__
 */


--- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
@ -28,10 +28,10 @@
 /**
 * Description: HAL for AVR - SPI functions
 *
- * For ARDUINO_ARCH_AVR
+ * For __AVR__
 */

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 // --------------------------------------------------------------------------
 // Includes
@ -210,4 +210,4 @@ void spiBegin (void) {
 #endif  // SOFTWARE_SPI


-#endif // ARDUINO_ARCH_AVR
+#endif // __AVR__
--- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
+++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
@ -28,7 +28,7 @@
 * Modified 28 September 2010 by Mark Sproul
 * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
 */
-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 #include "MarlinSerial.h"
 #include "../../Marlin.h"
--- a/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp
+++ b/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp
@ -1,4 +1,4 @@
-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 #include "../persistent_store_api.h"

@ -52,4 +52,4 @@ void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
 }

 #endif // EEPROM_SETTINGS
-#endif // ARDUINO_ARCH_AVR
+#endif // __AVR__
--- a/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp
@ -51,7 +51,7 @@
 *
 */

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 #include "../../inc/MarlinConfig.h"

@ -215,4 +215,4 @@ void finISR(timer16_Sequence_t timer) {

 #endif // HAS_SERVOS

-#endif // ARDUINO_ARCH_AVR
+#endif // __AVR__
--- a/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp
@ -20,7 +20,7 @@
 *
 */

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

 #include "../../inc/MarlinConfig.h"

@ -58,4 +58,4 @@ void watchdog_init() {
 #endif // WATCHDOG_RESET_MANUAL

 #endif // USE_WATCHDOG
-#endif // ARDUINO_ARCH_AVR
+#endif // __AVR__
--- a/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp
+++ b/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp
@ -52,4 +52,4 @@ void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
 }

 #endif // EEPROM_SETTINGS
-#endif // ARDUINO_ARCH_AVR
+#endif // __AVR__
--- a/Marlin/src/HAL/HAL_SanityCheck.h
+++ b/Marlin/src/HAL/HAL_SanityCheck.h
@ -22,7 +22,7 @@

 #ifndef HAL_SANITYCHECK_H

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "HAL_AVR/SanityCheck_AVR_8_bit.h"
 #elif defined(ARDUINO_ARCH_SAM)
  #include "HAL_DUE/SanityCheck_Due.h"
--- a/Marlin/src/HAL/HAL_endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_endstop_interrupts.h
@ -34,7 +34,7 @@ FORCE_INLINE void endstop_ISR_worker( void ) {
 // One ISR for all EXT-Interrupts
 void endstop_ISR(void) { endstop_ISR_worker(); }

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__

  #include "HAL_AVR/endstop_interrupts.h"

--- a/Marlin/src/HAL/HAL_pinsDebug.h
+++ b/Marlin/src/HAL/HAL_pinsDebug.h
@ -23,7 +23,7 @@
 #ifndef HAL_PINSDEBUG_H
 #define HAL_PINSDEBUG_H

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "HAL_AVR/pinsDebug_AVR_8_bit.h"
 #elif defined(ARDUINO_ARCH_SAM)
  #include "HAL_DUE/HAL_pinsDebug_Due.h"
--- a/Marlin/src/HAL/HAL_spi_pins.h
+++ b/Marlin/src/HAL/HAL_spi_pins.h
@ -29,7 +29,7 @@
 #elif defined(IS_32BIT_TEENSY)
  #include "HAL_TEENSY35_36/spi_pins.h"

-#elif defined(ARDUINO_ARCH_AVR)
+#elif defined(__AVR__)
  #include "HAL_AVR/spi_pins.h"

 #elif defined(TARGET_LPC1768)
--- a/Marlin/src/HAL/servo.h
+++ b/Marlin/src/HAL/servo.h
@ -78,7 +78,7 @@
 #else
  #include <stdint.h>

-  #if defined(ARDUINO_ARCH_AVR) || defined(ARDUINO_ARCH_SAM)
+  #if defined(__AVR__) || defined(ARDUINO_ARCH_SAM)
    // we're good to go
  #else
    #error "This library only supports boards with an AVR or SAM3X processor."
--- a/Marlin/src/HAL/servo_private.h
+++ b/Marlin/src/HAL/servo_private.h
@ -45,7 +45,7 @@
 #include <stdint.h>

 // Architecture specific include
-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "HAL_AVR/ServoTimers.h"
 #elif defined(ARDUINO_ARCH_SAM)
  #include "HAL_DUE/ServoTimers.h"
--- a/Marlin/src/core/serial.h
+++ b/Marlin/src/core/serial.h
@ -27,7 +27,7 @@

 //todo: HAL: breaks encapsulation
 // For AVR only, define a serial interface based on configuration
-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #ifdef USBCON
    #include "HardwareSerial.h"
    #if ENABLED(BLUETOOTH)
--- a/Marlin/src/inc/MarlinConfig.h
+++ b/Marlin/src/inc/MarlinConfig.h
@ -31,7 +31,7 @@
 #include "../../Configuration_adv.h"
 #include "../HAL/HAL.h"
 #include "../pins/pins.h"
-#if defined(ARDUINO_ARCH_AVR) && !defined(USBCON)
+#if defined(__AVR__) && !defined(USBCON)
  #define HardwareSerial_h // trick to disable the standard HWserial
 #endif
 #include "Conditionals_post.h"
--- a/Marlin/src/module/delta.cpp
+++ b/Marlin/src/module/delta.cpp
@ -88,7 +88,7 @@ void recalc_delta_settings(float radius, float diagonal_rod) {
 *   (see above)
 */

-#if ENABLED(DELTA_FAST_SQRT) && defined(ARDUINO_ARCH_AVR)
+#if ENABLED(DELTA_FAST_SQRT) && defined(__AVR__)
  /**
   * Fast inverse sqrt from Quake III Arena
   * See: https://en.wikipedia.org/wiki/Fast_inverse_square_root
--- a/Marlin/src/module/delta.h
+++ b/Marlin/src/module/delta.h
@ -63,7 +63,7 @@ void recalc_delta_settings(float radius, float diagonal_rod);
 *   (see above)
 */

-#if ENABLED(DELTA_FAST_SQRT) && defined(ARDUINO_ARCH_AVR)
+#if ENABLED(DELTA_FAST_SQRT) && defined(__AVR__)
  /**
   * Fast inverse sqrt from Quake III Arena
   * See: https://en.wikipedia.org/wiki/Fast_inverse_square_root
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@ -46,7 +46,7 @@

 #include "stepper.h"

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "speed_lookuptable.h"
 #endif

@ -1139,7 +1139,7 @@ void Stepper::init() {
    E_AXIS_INIT(4);
  #endif

-  #ifdef ARDUINO_ARCH_AVR
+  #ifdef __AVR__
    // waveform generation = 0100 = CTC
    SET_WGM(1, CTC_OCRnA);

--- a/Marlin/src/module/stepper.h
+++ b/Marlin/src/module/stepper.h
@ -45,7 +45,7 @@

 #include "stepper_indirection.h"

-#ifdef ARDUINO_ARCH_AVR
+#ifdef __AVR__
  #include "speed_lookuptable.h"
 #endif

--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@ -1081,7 +1081,7 @@ void Temperature::init() {
  #endif

  // todo: HAL: fix abstraction
-  #ifdef ARDUINO_ARCH_AVR
+  #ifdef __AVR__
    // Use timer0 for temperature measurement
    // Interleave temperature interrupt with millies interrupt
    OCR0B = 128;