Bugfix 2.0.x add motherboard pins define (#12689)
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer. - `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
This commit is contained in:
Msq001
Scott Lahteine
parent
b7a8dcc35d
commit
f8c5d31864
@ -185,6 +185,8 @@
|
||||
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
|
||||
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
|
||||
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
||||
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||
|
||||
//
|
||||
// SAM3X8E ARM Cortex M3
|
||||
|
||||
@ -320,6 +320,10 @@
|
||||
#include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769
|
||||
#elif MB(SMOOTHIEBOARD)
|
||||
#include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769
|
||||
#elif MB(BIQU_SKR_V1_1)
|
||||
#include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIQU_B300_V1_0)
|
||||
#include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
|
||||
|
||||
//
|
||||
// Other 32-bit Boards
|
||||
|
||||
183
Marlin/src/pins/pins_BIQU_B300_V1.0.h
Normal file
183
Marlin/src/pins/pins_BIQU_B300_V1.0.h
Normal file
@ -0,0 +1,183 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* BIQU BQ111-A4
|
||||
*
|
||||
* Applies to the following boards:
|
||||
*
|
||||
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TARGET_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "BIQU Thunder B300 V1.0"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
|
||||
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
|
||||
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
|
||||
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
|
||||
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
|
||||
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
|
||||
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_00
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P0_04
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN P1_15 // ETH
|
||||
#endif
|
||||
|
||||
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P0_11
|
||||
#define Y_ENABLE_PIN P0_10
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN P1_14 // ETH
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN P2_02
|
||||
#define Z_DIR_PIN P0_20
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN P1_16 // ETH
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN P2_03
|
||||
#define E0_DIR_PIN P0_22
|
||||
#define E0_ENABLE_PIN P0_21
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN P1_17 // ETH
|
||||
#endif
|
||||
|
||||
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#define TMC_SW_MOSI P0_18 // ETH
|
||||
#define TMC_SW_MISO P0_17 // ETH
|
||||
#define TMC_SW_SCK P0_15 // ETH
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_0_PIN 1 // A0 (T0)
|
||||
#define TEMP_BED_PIN 0 // A1 (T1)
|
||||
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN P2_07
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN P2_04
|
||||
#endif
|
||||
|
||||
//
|
||||
// Unused
|
||||
//
|
||||
//#define PIN_P2_10 P2_10 // IBOOT-1
|
||||
//#define PIN_P0_27 P0_27 // Onboard SD Detect
|
||||
|
||||
/**
|
||||
* LCD / Controller
|
||||
*
|
||||
* REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5,
|
||||
* LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector.
|
||||
*
|
||||
* A remote SD card is not supported as the pins routed to EXP2 are the same as used
|
||||
* for the onboard SD card, and a chip select signal is not provided for the remote
|
||||
* SD card.
|
||||
*/
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN P1_31 // EXP1-1
|
||||
|
||||
#define BTN_EN1 P3_26 // EXP2-3
|
||||
#define BTN_EN2 P3_25 // EXP2-5
|
||||
#define BTN_ENC P1_30 // EXP1-2
|
||||
|
||||
#define SD_DETECT_PIN P0_27 // EXP2-7
|
||||
#define LCD_PINS_RS P0_16 // EXP1-4
|
||||
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
|
||||
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
|
||||
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD)
|
||||
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
|
||||
#endif
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used"
|
||||
#endif
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
/**
|
||||
* SD Card Reader
|
||||
*
|
||||
* Software SPI is used to interface with a stand-alone SD card reader connected to EXP1.
|
||||
* Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board.
|
||||
*/
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
#define SCK_PIN P0_15 // EXP1-5
|
||||
#define MISO_PIN P0_16 // EXP1-4
|
||||
#define MOSI_PIN P0_18 // EXP1-3
|
||||
#define SS_PIN P1_30 // EXP1-2
|
||||
#define SDSS SS_PIN
|
||||
|
||||
#endif // SDSUPPORT
|
||||
|
||||
/**
|
||||
* PWMS
|
||||
*
|
||||
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
|
||||
*
|
||||
* PWM1.1 P0_18 LCD_PINS_ENABLE
|
||||
* PWM1.1 P2_0 X_STEP_PIN
|
||||
* PWM1.2 P1_20 <none>
|
||||
* PWM1.2 P2_1 Y_STEP_PIN
|
||||
* PWM1.3 P1_21 <none>
|
||||
* PWM1.3 P2_2 Z_STEP_PIN
|
||||
* PWM1.4 P1_23 <none>
|
||||
* PWM1.4 P2_3 E0_STEP_PIN
|
||||
* PWM1.5 P1_24 X_MIN_PIN
|
||||
* PWM1.5 P2_4 FAN_PIN
|
||||
* PWM1.6 P1_26 Y_MIN_PIN
|
||||
* PWM1.6 P2_5 HEATER_BED_PIN
|
||||
*/
|
||||
194
Marlin/src/pins/pins_BIQU_SKR_V1.1.h
Normal file
194
Marlin/src/pins/pins_BIQU_SKR_V1.1.h
Normal file
@ -0,0 +1,194 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TARGET_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "BIQU SKR V1.1"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_29
|
||||
#define X_MAX_PIN P1_28
|
||||
#define Y_MIN_PIN P1_27
|
||||
#define Y_MAX_PIN P1_26
|
||||
#define Z_MIN_PIN P1_25
|
||||
#define Z_MAX_PIN P1_24
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P0_04
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P4_28
|
||||
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P2_02
|
||||
#define Y_ENABLE_PIN P2_00
|
||||
|
||||
#define Z_STEP_PIN P0_20
|
||||
#define Z_DIR_PIN P0_21
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
|
||||
#define E0_STEP_PIN P0_11
|
||||
#define E0_DIR_PIN P2_13
|
||||
#define E0_ENABLE_PIN P2_12
|
||||
|
||||
#define E1_STEP_PIN P0_01
|
||||
#define E1_DIR_PIN P0_00
|
||||
#define E1_ENABLE_PIN P0_10
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_BED_PIN 0 // A0 (T0) - (67) - TEMP_BED_PIN
|
||||
#define TEMP_0_PIN 1 // A1 (T1) - (68) - TEMP_0_PIN
|
||||
#define TEMP_1_PIN 2 // A2 (T2) - (69) - TEMP_1_PIN
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN P2_07
|
||||
#define HEATER_1_PIN P2_04
|
||||
#define FAN_PIN P2_03
|
||||
#define HEATER_BED_PIN P2_05
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS P1_23 // (53)
|
||||
|
||||
/**
|
||||
* LCD / Controller
|
||||
*
|
||||
* All controllers can use J3 and J5 on the Re-ARM board. Custom cabling will be required.
|
||||
*/
|
||||
|
||||
/**
|
||||
* Smart LCD adapter
|
||||
*
|
||||
* The Smart LCD adapter can be used for the two 10 pin LCD controllers such as
|
||||
* REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use
|
||||
* DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable
|
||||
* is needed to pick up 5V for the EXP1 connection.
|
||||
*
|
||||
* SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines
|
||||
* on the LCD display during accesses of the SD card. The menus/code has been arranged so
|
||||
* that the garbage/lines are erased immediately after the SD card accesses are completed.
|
||||
*/
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
||||
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
||||
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
||||
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
||||
|
||||
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
||||
|
||||
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
||||
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
||||
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
||||
|
||||
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
||||
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
||||
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
||||
|
||||
#else
|
||||
|
||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||
|
||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
||||
|
||||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||||
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
||||
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
||||
|
||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||
#elif DISABLED(NEWPANEL)
|
||||
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
||||
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
||||
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
||||
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
||||
#endif
|
||||
|
||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||
// #define LCD_SCREEN_ROT_180
|
||||
|
||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
||||
|
||||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||||
|
||||
#define DOGLCD_CS P0_16 // (16)
|
||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||
#define DOGLCD_SCK SCK_PIN
|
||||
#define DOGLCD_MOSI MOSI_PIN
|
||||
|
||||
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
||||
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
||||
#else
|
||||
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
||||
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
||||
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
||||
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
||||
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
||||
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
||||
|
||||
#if ENABLED(MINIPANEL)
|
||||
// GLCD features
|
||||
//#define LCD_CONTRAST 190
|
||||
// Uncomment screen orientation
|
||||
//#define LCD_SCREEN_ROT_90
|
||||
//#define LCD_SCREEN_ROT_180
|
||||
//#define LCD_SCREEN_ROT_270
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
Loading…
Reference in New Issue
Block a user