Merge bugfix-2.0.x into 2.0.x

This commit is contained in:
Scott Lahteine 2020-03-14 00:35:11 -05:00
commit fa48fbb9b8
742 changed files with 4130 additions and 3245 deletions

View File

@ -29,7 +29,7 @@ jobs:
- DUE
- esp32
- linux_native
- megaatmega2560
- mega2560
- teensy31
- teensy35
- SAMD51_grandcentral_m4
@ -37,22 +37,23 @@ jobs:
# Extended AVR Environments
- FYSETC_F6_13
- megaatmega1280
- mega1280
- rambo
- sanguino_atmega1284p
- sanguino_atmega644p
- sanguino1284p
- sanguino644p
# Extended STM32 Environments
- STM32F103RC_bigtree
- STM32F103RC_bigtree_USB
- STM32F103RE_bigtree
- STM32F103RE_bigtree_USB
- STM32F103RC_btt
- STM32F103RC_btt_USB
- STM32F103RE_btt
- STM32F103RE_btt_USB
- STM32F103RC_fysetc
- jgaurora_a5s_a1
- STM32F103VE_longer
- STM32F407VE_black
- BIGTREE_SKR_PRO
- BIGTREE_GTR_V1_0
- mks_robin
- ARMED
- FYSETC_S6

View File

@ -36,7 +36,7 @@
* Advanced settings can be found in Configuration_adv.h
*
*/
#define CONFIGURATION_H_VERSION 020004
#define CONFIGURATION_H_VERSION 020005
//===========================================================================
//============================= Getting Started =============================
@ -925,6 +925,14 @@
#define SMART_EFFECTOR_MOD_PIN -1 // Connect a GPIO pin to the Smart Effector MOD pin
#endif
/**
* Use StallGuard2 to probe the bed with the nozzle.
* Requires stallGuard-capable Trinamic stepper drivers.
* CAUTION: This can damage machines with Z lead screws.
* Take extreme care when setting up this feature.
*/
//#define SENSORLESS_PROBING
//
// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
//

View File

@ -31,7 +31,7 @@
* Basic settings can be found in Configuration.h
*
*/
#define CONFIGURATION_ADV_H_VERSION 020004
#define CONFIGURATION_ADV_H_VERSION 020005
// @section temperature
@ -276,8 +276,10 @@
#define AUTOTEMP_OLDWEIGHT 0.98
#endif
// Show extra position information with 'M114 D'
//#define M114_DETAIL
// Extra options for the M114 "Current Position" report
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
//#define M114_REALTIME // Real current position based on forward kinematics
//#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
// Show Temperature ADC value
// Enable for M105 to include ADC values read from temperature sensors.
@ -716,6 +718,9 @@
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
// Re-homing might be more precise in reproducing the actual 'G28 Z' homing height, especially on an uneven bed.
#define HOME_AFTER_G34
#endif
// @section motion
@ -990,6 +995,10 @@
// Show the E position (filament used) during printing
//#define LCD_SHOW_E_TOTAL
#if ENABLED(SHOW_BOOTSCREEN)
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#endif
#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
//#define SHOW_REMAINING_TIME // Display estimated time to completion
@ -1012,12 +1021,9 @@
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
// around this by connecting a push button or single throw switch to the pin defined
// as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
// The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
// Enable this option and set to HIGH if your SD cards are incorrectly detected.
//#define SD_DETECT_STATE HIGH
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@ -1039,9 +1045,13 @@
* during SD printing. If the recovery file is found at boot time, present
* an option on the LCD screen to continue the print from the last-known
* point in the file.
*
* If the machine reboots when resuming a print you may need to replace or
* reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
*/
//#define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
@ -1221,10 +1231,6 @@
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
//#define USE_SMALL_INFOFONT
// Enable this option and reduce the value to optimize screen updates.
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
//#define DOGM_SPI_DELAY_US 5
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
@ -1241,6 +1247,10 @@
* This will prevent position updates from being displayed.
*/
#if ENABLED(U8GLIB_ST7920)
// Enable this option and reduce the value to optimize screen updates.
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
//#define DOGM_SPI_DELAY_US 5
//#define LIGHTWEIGHT_UI
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS 20
@ -1278,7 +1288,7 @@
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_SERIAL_PORT 3
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
@ -1286,16 +1296,15 @@
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
//#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#define DGUS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
@ -1578,7 +1587,7 @@
#if ENABLED(PROBE_TEMP_COMPENSATION)
// Max temperature that can be reached by heated bed.
// This is required only for the calibration process.
#define PTC_MAX_BED_TEMP 110
#define PTC_MAX_BED_TEMP BED_MAXTEMP
// Park position to wait for probe cooldown
#define PTC_PARK_POS_X 0.0F
@ -2015,7 +2024,7 @@
* TMCStepper library is required to use TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper
*/
#if HAS_TRINAMIC
#if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
#define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
@ -2302,14 +2311,6 @@
*/
//#define SENSORLESS_HOMING // StallGuard capable drivers only
/**
* Use StallGuard2 to probe the bed with the nozzle.
*
* CAUTION: This could cause damage to machines that use a lead screw or threaded rod
* to move the Z axis. Take extreme care when attempting to enable this feature.
*/
//#define SENSORLESS_PROBING // StallGuard capable drivers only
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
// TMC2209: 0...255. TMC2130: -64...63
#define X_STALL_SENSITIVITY 8
@ -2345,7 +2346,7 @@
*/
#define TMC_ADV() { }
#endif // HAS_TRINAMIC
#endif // HAS_TRINAMIC_CONFIG
// @section L64XX
@ -2991,7 +2992,7 @@
#define MAX7219_LOAD_PIN 44
//#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
#define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
#define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral
#define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
// connector at: right=0 bottom=-90 top=90 left=180

View File

@ -197,7 +197,7 @@ void spiBegin() {
// output pin high - like sending 0xFF
WRITE(MOSI_PIN, HIGH);
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
WRITE(SCK_PIN, HIGH);
nop; // adjust so SCK is nice
@ -224,7 +224,7 @@ void spiBegin() {
void spiSend(uint8_t data) {
// no interrupts during byte send - about 8µs
cli();
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
WRITE(SCK_PIN, LOW);
WRITE(MOSI_PIN, data & 0x80);
data <<= 1;

View File

@ -55,7 +55,7 @@
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() asm volatile("": : :"memory");
#include "../../feature/emergency_parser.h"
#include "../../feature/e_parser.h"
// "Atomically" read the RX head index value without disabling interrupts:
// This MUST be called with RX interrupts enabled, and CAN'T be called
@ -682,7 +682,7 @@
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
LOOP_L_N(i, digits) rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it

View File

@ -31,10 +31,10 @@
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
*/
#include "../shared/MarlinSerial.h"
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
@ -261,12 +261,12 @@
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
static constexpr bool XONOFF = bSERIAL_XON_XOFF;
static constexpr bool EMERGENCYPARSER = bEMERGENCY_PARSER;
static constexpr bool DROPPED_RX = bSERIAL_STATS_DROPPED_RX;
static constexpr bool RX_OVERRUNS = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
static constexpr bool MAX_RX_QUEUED = bSERIAL_STATS_MAX_RX_QUEUED;
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
@ -304,7 +304,7 @@
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_OVERRUNS = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};

View File

@ -167,7 +167,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
// loop over prescaler values
for (uint8_t i = 1; i < 8; i++) {
LOOP_S_L_N(i, 1, 8) {
uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
if (timer.n == 2) {
// No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP

View File

@ -26,7 +26,7 @@
*
* Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
* Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
*/
#include "../fastio.h"

View File

@ -56,7 +56,7 @@
/**
* The Trinamic library includes SoftwareSerial.h, leading to a compile error.
*/
#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
#error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif

View File

@ -70,12 +70,12 @@
void PRINT_ARRAY_NAME(uint8_t x) {
char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
LOOP_L_N(y, MAX_NAME_LENGTH) {
char temp_char = pgm_read_byte(name_mem_pointer + y);
if (temp_char != 0)
SERIAL_CHAR(temp_char);
else {
for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) SERIAL_CHAR(' ');
LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
break;
}
}

View File

@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
volatile uint8_t *outData = u8g_outData,
*outClock = u8g_outClock;
U8G_ATOMIC_START();
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
if (val & 0x80)
*outData |= bitData;
else
@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
volatile uint8_t *outData = u8g_outData,
*outClock = u8g_outClock;
U8G_ATOMIC_START();
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
*outClock &= bitNotClock;
if (val & 0x80)
*outData |= bitData;

View File

@ -54,7 +54,7 @@
#include "../../inc/MarlinConfig.h"
#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
#if ENABLED(FLASH_EEPROM_EMULATION)
#include "../shared/Marduino.h"
#include "../shared/persistent_store_api.h"
@ -1016,5 +1016,5 @@ void eeprom_flush() {
ee_Flush();
}
#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
#endif // FLASH_EEPROM_EMULATION
#endif // ARDUINO_ARCH_AVR

View File

@ -45,7 +45,7 @@ template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSeria
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() asm volatile("": : :"memory");
#include "../../feature/emergency_parser.h"
#include "../../feature/e_parser.h"
// (called with RX interrupts disabled)
template<typename Cfg>
@ -606,7 +606,7 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
LOOP_L_N(i, digits) rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it

View File

@ -27,10 +27,10 @@
* Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti. All right reserved.
*/
#include "../shared/MarlinSerial.h"
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#define DEC 10
#define HEX 16
#define OCT 8
@ -163,12 +163,12 @@ struct MarlinSerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
static constexpr bool XONOFF = bSERIAL_XON_XOFF;
static constexpr bool EMERGENCYPARSER = bEMERGENCY_PARSER;
static constexpr bool DROPPED_RX = bSERIAL_STATS_DROPPED_RX;
static constexpr bool RX_OVERRUNS = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
static constexpr bool MAX_RX_QUEUED = bSERIAL_STATS_MAX_RX_QUEUED;
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
#if SERIAL_PORT >= 0

View File

@ -34,7 +34,7 @@
#include "MarlinSerialUSB.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/emergency_parser.h"
#include "../../feature/e_parser.h"
#endif
// Imports from Atmel USB Stack/CDC implementation
@ -259,7 +259,7 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
for (uint8_t i = 0; i < digits; ++i)
LOOP_L_N(i, digits)
rounding *= 0.1;
number += rounding;

View File

@ -80,7 +80,7 @@ Pio *SCK_pPio, *MOSI_pPio;
uint32_t SCK_dwMask, MOSI_dwMask;
void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
if (val & 0x80)
MOSI_pPio->PIO_SODR = MOSI_dwMask;
else
@ -94,7 +94,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
}
void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
for (uint8_t i = 0; i < 8; i++) {
LOOP_L_N(i, 8) {
SCK_pPio->PIO_CODR = SCK_dwMask;
DELAY_NS(50);
if (val & 0x80)

View File

@ -63,7 +63,7 @@ extern PWM_map ISR_table[NUM_PWMS];
extern uint32_t motor_current_setting[3];
#define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6 ; i++) work_table[i] = active_table[i]; }while(0)
#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)
#define PWM_MR0 19999 // base repetition rate minus one count - 20mS
#define PWM_PR 24 // prescaler value - prescaler divide by 24 + 1 - 1 MHz output

View File

@ -20,3 +20,9 @@
*
*/
#pragma once
#if USE_EMULATED_EEPROM
#undef SRAM_EEPROM_EMULATION
#undef SDCARD_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION 1
#endif

View File

@ -29,7 +29,7 @@
#include "../../inc/MarlinConfig.h"
#include "../shared/persistent_store_api.h"
#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
#define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
#endif
@ -38,7 +38,7 @@ extern void eeprom_flush();
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() {
#if NONE(I2C_EEPROM, SPI_EEPROM)
#if ENABLED(FLASH_EEPROM_EMULATION)
eeprom_flush();
#endif
return true;

Some files were not shown because too many files have changed in this diff Show More