Richard Wackerbarth
5ea139fd79
Revised Versioning mechanism
2015-05-25 15:53:14 -05:00
AnHardt
da246f5cb1
Activate BED_MINTEMP error.
...
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().
Includes #2156 .
2015-05-25 13:23:19 +02:00
AnHardt
959da98d8e
Call kill() only once when triggered by a temperature error
...
to avoid stack overflow when called from interrupt.
Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
2015-05-25 12:44:03 +02:00
Scott Lahteine
ffc39dc182
Merge pull request #2153 from thinkyhead/leveling_shrink
...
Reduce code size with out_of_range_error function
2015-05-24 20:32:51 -07:00
Scott Lahteine
68f6f149d0
Reduce code size with out_of_range_error function
...
- Affects code size when automatic bed leveling is enabled
2015-05-24 20:18:02 -07:00
Scott Lahteine
f8aabd670e
Notes about Development in its README.md
2015-05-24 18:47:00 -07:00
wurstnase
94120740d8
faster compare
...
!(~(ab)&0x3) and ab == 0x3 are equal
2015-05-23 07:55:15 +02:00
Scott Lahteine
c9141e604a
Merge pull request #2145 from thinkyhead/gcode_folding
...
Indentation in process_commands
2015-05-22 18:47:37 -07:00
Scott Lahteine
3778362f88
Merge pull request #2143 from thinkyhead/fix_command_parser_M110
...
Cleanup pins in RAMPS_13_EFB boards
2015-05-22 18:47:10 -07:00
Scott Lahteine
b55f8718c3
Indent G90/G91, G92
2015-05-22 17:34:08 -07:00
Scott Lahteine
b0d520b109
Indent G30, G31/G32
2015-05-22 17:33:17 -07:00
Scott Lahteine
ffe27a6225
Indent G29
2015-05-22 17:32:46 -07:00
Scott Lahteine
86083badc2
Indent G4, G10/G11, G28
2015-05-22 17:32:27 -07:00
Scott Lahteine
47d7a9cb5e
Indent G2/G3
2015-05-22 17:31:38 -07:00
Scott Lahteine
350f239d84
Indent G0/G1
2015-05-22 17:31:24 -07:00
Scott Lahteine
672b0c1fd3
Cleanup pins in RAMPS_13_EFB boards
2015-05-22 16:20:54 -07:00
Scott Lahteine
f4584c51c5
Merge pull request #2142 from thinkyhead/fix_command_parser_M110
...
No need for +1 on initial seen_pointer
2015-05-22 15:32:11 -07:00
Scott Lahteine
15a2351675
No need for +1 on initial seen_pointer
2015-05-22 15:31:30 -07:00
Scott Lahteine
8cba3bd811
Merge pull request #2141 from thinkyhead/fix_command_parser_M110
...
Set seen_pointer before calling code_value
2015-05-22 15:29:15 -07:00
Scott Lahteine
550dd87b2a
Set seen_pointer before calling code_value
2015-05-22 15:11:48 -07:00
Scott Lahteine
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
2015-05-22 13:59:50 -07:00
Scott Lahteine
04a1622172
Merge pull request #2127 from Wackerbarth/Kossel_Pro
...
Kossel Pro
2015-05-21 18:43:26 -07:00
Scott Lahteine
81c2ca3e10
Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb
...
Witbox and Hephestos are RAMPS EFB
2015-05-21 18:39:02 -07:00
Scott Lahteine
f919a2fed1
Merge pull request #2134 from AnHardt/preheat-all
...
Shift call of start_watching_heater() into setTargetHotend()
2015-05-21 18:36:28 -07:00
Scott Lahteine
65343e8ae8
Merge pull request #2138 from thinkyhead/tweak_swh
...
Fix a couple of doubled semicolons
2015-05-21 18:36:04 -07:00
Scott Lahteine
063881b5bd
Fix a couple of doubled semicolons
2015-05-21 18:15:29 -07:00
AnHardt
94dff5b36a
Merge pull request #2137 from thinkyhead/tweak_swh
...
Move millis call in start_watching_heater
2015-05-22 02:02:07 +02:00
Scott Lahteine
70d2f48d4e
Merge pull request #2136 from thinkyhead/M303_suppress_error
...
Suppress the line mismatch error after M303
2015-05-21 16:46:30 -07:00
AnHardt
0c0ace2a04
Remove start_watching_heater() fom M104 and M109
2015-05-22 01:44:50 +02:00
Scott Lahteine
00716d0ca0
Small start_watching_heater adjustment
2015-05-21 16:44:49 -07:00
Scott Lahteine
834747deb7
Merge pull request #2135 from Wurstnase/new_endstop_bits
...
new endstop bits
2015-05-21 16:35:54 -07:00
Scott Lahteine
bde9c70d42
Suppress the line mismatch error after M303
2015-05-21 16:27:22 -07:00
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
2015-05-21 16:22:47 -07:00
Scott Lahteine
4d11b29959
Merge pull request #2113 from thinkyhead/command_sanitizer
...
Command sanitizer
2015-05-21 16:21:58 -07:00
Scott Lahteine
71ff9adb12
Merge pull request #2132 from thinkyhead/fix_M120_M121
...
M120 and M121 are reversed
2015-05-21 16:20:03 -07:00
wurstnase
ff98b8632b
new endstop bits
2015-05-21 23:16:43 +02:00
AnHardt
9b0fa9c309
Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS
2015-05-21 21:07:37 +02:00
AnHardt
bc0764894a
Shift call of start_watching_heater() into setTargetHotend()
...
to warrant watching is set or reset.
Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
2015-05-21 20:36:11 +02:00
Richard Wackerbarth
b878bc5620
Introducing the Kossel Pro Build Configuration
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
3004359191
Libraries supporting Marlin platform
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
6c86266fb6
Brainwave Bootloaders
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
3eee09cb6c
Brainwave Variants
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
945fd2cf82
Brainwave Core from Arduino 1.0.1 (In 1.5 file structure)
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
1b707a7cf7
Platform and Boards
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
1d8f61ca8a
AT90USB is defined in pins.h
2015-05-21 11:46:54 -05:00
Richard Wackerbarth
735bf2d35f
Describe Custom M Code
2015-05-21 08:06:33 -05:00
Scott Lahteine
f39658c822
M120 and M121 are reversed
2015-05-21 00:17:44 -07:00
Scott Lahteine
6eb4f90ce7
Also synchronize configurator copies of configs
2015-05-20 21:34:00 -07:00
Scott Lahteine
9d1961ebe3
Witbox and Hephestos are just RAMPS_13_EFB
2015-05-20 21:33:23 -07:00
AnHardt
d6c1285ab5
Merge pull request #2115 from AnHardt/_temp_error
...
Use _temp_error() for all errors thrown by different heater sanity check mechanisms
2015-05-21 00:36:30 +02:00
