Scott Lahteine
9b3d4380d3
Only watch the heater that was set
2015-05-10 20:26:45 -07:00
Scott Lahteine
52c0696e44
Merge pull request #2044 from thinkyhead/fix_servos_too
...
Make some z probe and servo code tweaks
2015-05-10 20:10:42 -07:00
Scott Lahteine
58781cb88c
Merge pull request #2045 from delagela/upstream
...
Correction traductions
2015-05-10 17:58:00 -07:00
Wurstnase
b55f32f8a1
replace some bools
...
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
2015-05-10 21:37:39 +02:00
Laurent DELAGE
e70e6e2b48
Correction traductions
2015-05-10 15:38:50 +02:00
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
2015-05-09 19:11:19 -07:00
Bo Herrmannsen
598c7aea5d
Update README.md
2015-05-09 23:27:54 +02:00
Bo Herrmannsen
4cafe9e275
updated info on hangout
2015-05-09 23:27:34 +02:00
Bo Herrmannsen
b0235adccd
Update README.md
2015-05-09 23:18:39 +02:00
Bo Herrmannsen
875d86bf9b
removed donation as it was agreed that we should not have it
2015-05-09 23:16:56 +02:00
Bo Herrmannsen
37219072c1
moved to http://www.marlinfirmware.org/
2015-05-09 23:15:52 +02:00
Bo Herrmannsen
4aa2490099
moved to http://www.marlinfirmware.org/
2015-05-09 23:14:52 +02:00
Bo Herrmannsen
1351e40c72
moved to http://www.marlinfirmware.org/
2015-05-09 23:11:42 +02:00
Bo Herrmannsen
c0b318330b
moved to http://www.marlinfirmware.org/
2015-05-09 23:11:33 +02:00
Bo Herrmannsen
12d0983757
moved to http://www.marlinfirmware.org/
2015-05-09 23:11:18 +02:00
Bo Herrmannsen
7cd7b2e4c8
moved to http://www.marlinfirmware.org/
2015-05-09 22:58:49 +02:00
Bo Herrmannsen
031294bdd2
moved to http://www.marlinfirmware.org/
2015-05-09 18:31:44 +02:00
Bo Herrmannsen
b2b595f8f4
moved to http://www.marlinfirmware.org/
2015-05-09 18:29:23 +02:00
Bo Herrmannsen
2ddace1a84
moved to http://www.marlinfirmware.org/
2015-05-09 18:26:58 +02:00
Bo Herrmannsen
caf15371e2
moved to http://www.marlinfirmware.org/
2015-05-09 18:24:31 +02:00
Bo Herrmannsen
29f4ebf32a
moved to http://www.marlinfirmware.org/
2015-05-09 18:16:28 +02:00
Bo Herrmannsen
39d6de1558
Update README.md
2015-05-09 14:59:48 +02:00
Bo Herrmannsen
711f7b0180
Update README.md
2015-05-09 14:56:59 +02:00
Bo Herrmannsen
b413cf34e9
moved to http://www.marlinfirmware.org/
2015-05-09 14:55:22 +02:00
Bo Herrmannsen
d92b52b19b
moved to http://www.marlinfirmware.org/
2015-05-09 14:40:18 +02:00
Bo Herrmannsen
b9b9a2085a
moved to http://www.marlinfirmware.org/
2015-05-09 14:39:46 +02:00
Bo Herrmannsen
0de83187ea
moved to http://www.marlinfirmware.org/
2015-05-09 14:29:07 +02:00
Bo Herrmannsen
6e8f8706b0
moved to http://www.marlinfirmware.org/
2015-05-09 14:28:43 +02:00
Bo Herrmannsen
d54fe3a40c
moved to http://www.marlinfirmware.org/
2015-05-09 14:19:07 +02:00
Bo Herrmannsen
86ed55e75c
moved to http://www.marlinfirmware.org/
2015-05-09 14:18:23 +02:00
Scott Lahteine
28c87ec81b
Disable all heaters on temp error
2015-05-08 23:17:25 -07:00
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
2015-05-08 22:50:08 -07:00
Scott Lahteine
6110494a56
Change default to 4°C in 16s
2015-05-08 22:41:12 -07:00
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
2015-05-08 22:36:02 -07:00
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
2015-05-08 22:25:51 -07:00
Scott Lahteine
9a6423ea17
Merge pull request #2021 from brupje/Development
...
Fixes for reprapworld's keypad
2015-05-08 20:35:37 -07:00
Scott Lahteine
be77cfd895
Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper
...
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
2015-05-08 20:32:30 -07:00
Scott Lahteine
8b59e620bb
Merge pull request #2039 from thinkyhead/mks_base
...
Support for MKS BASE 1.0 board
2015-05-08 20:29:57 -07:00
Scott Lahteine
44decda00b
Add documentation for MKS BASE 1.0 et. al.
2015-05-08 19:35:59 -07:00
Scott Lahteine
cb4ea75fab
Support for MKS BASE 1.0 board
2015-05-08 19:07:37 -07:00
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
2015-05-08 18:19:31 -07:00
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
2015-05-08 21:27:18 +02:00
brupje
b425851441
Rename Configuration_megatronics.h to Configuration.h
2015-05-08 14:40:14 +02:00
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
2015-05-08 14:36:23 +02:00
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
2015-05-08 04:39:59 -07:00
Scott Lahteine
0511ccda23
Merge pull request #2034 from thinkyhead/fixup_configs
...
Edit thermal runaway description
2015-05-07 21:46:05 -07:00
Scott Lahteine
181ccc884c
Edit thermal runaway description
2015-05-07 20:46:03 -07:00
Wurstnase
073e4af7e2
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.
2015-05-07 18:55:47 +02:00
brupje
b7fcb11580
Added example configuration for Megatronics
2015-05-07 13:18:05 +02:00
