CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,415 Commits 1 Branch 0 Tags 107 MiB
b7e9ba7591
Commit Graph

2722 Commits

Author SHA1 Message Date
AnHardt
b7e9ba7591 Back to 1.0.3 dev - for now 2015-06-03 00:47:11 +02:00
AnHardt
d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning 
Versioning
 2015-06-02 18:31:21 +02:00
AnHardt
35af5ef23e Merge pull request #2225 from Wurstnase/naming 
consistency name for multiplier
 2015-06-02 10:18:22 +02:00
wurstnase
e7e964432b consistency name for multiplier 
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
 2015-06-01 22:33:22 +02:00
AnHardt
d4c6fc5d0a Merge pull request #2223 from AnHardt/dualz-semicolon 
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
 2015-06-01 20:15:55 +02:00
AnHardt
0d9d21d15f Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again. 2015-06-01 19:51:43 +02:00
MagoKimbra
881146bc22 Fix problem Width Cura 2015-06-01 17:25:32 +02:00
fmalpartida
11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing 
Updated LCD wiki location.
 2015-05-31 21:20:26 +02:00
Alexey Shvetsov
a8670b66a7 Update ru translation 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2015-05-31 20:09:10 +03:00
fmalpartida
93da52d011 Added support for OLED SSD1306 I2C based LCDs. 2015-05-31 18:53:29 +02:00
Wurstnase
9c09967803 Merge pull request #2149 from Wurstnase/enstop_bits 
faster compare
 2015-05-31 16:02:55 +03:00
wurstnase
0f3f7d6835 clean up double endstops 2015-05-31 14:06:13 +02:00
AnHardt
9d2a980bcf Merge pull request #2170 from thinkyhead/beep_M600_elsewise 
Slight size reduction by adding idle()
 2015-05-30 12:42:32 +02:00
AnHardt
2728dc0606 Merge pull request #2194 from thinkyhead/reduce_strings 
Redo "invalid extruder" to save 304 bytes
 2015-05-30 11:05:08 +02:00
Scott Lahteine
be5236e839 Reduce setTargetedHotend by removing the switch 2015-05-29 18:03:58 -07:00
Scott Lahteine
06f401e7e5 Redo "invalid extruder" to save 264 bytes 
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
 2015-05-28 22:25:28 -07:00
Scott Lahteine
1a882bcc2e Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands 
Ignore unknown commands if they start with G, M, or T
 2015-05-28 22:03:48 -07:00
Scott Lahteine
a672872717 Merge pull request #2187 from AnHardt/MAX6675M105 
Print active extruder with M105 for MAX6675
 2015-05-28 18:12:48 -07:00
Scott Lahteine
9beed830eb Drop commented code_is_good lines 2015-05-28 17:53:47 -07:00
Scott Lahteine
068d4a1eb2 Ignore unknown commands if they start with G, M, or T 2015-05-28 17:44:09 -07:00
Scott Lahteine
5824f613ff Merge pull request #2185 from jothan/bed_integral 
Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…
 2015-05-28 16:32:02 -07:00
Scott Lahteine
c5c9d12630 Merge pull request #2183 from AnHardt/displayinit 
Initialize the display earlier
 2015-05-28 16:29:18 -07:00
Scott Lahteine
ef4becc413 Merge pull request #2188 from AnHardt/FtoN 
Replace MSG_F? with MSG_N?
 2015-05-28 16:18:50 -07:00
Scott Lahteine
0564625757 Update M33 for new gcode parser 2015-05-28 14:17:39 -07:00
AnHardt
f18f689c01 Replace MSG_F? with MSG_N? 
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
 2015-05-28 20:30:23 +02:00
AnHardt
af7e3f5076 Print active extruder with M105 for MAX6675 
Was omitted when T0 is a MAX6675.
 2015-05-28 19:03:16 +02:00
Jonathan Bastien-Filiatrault
d46d9d998e Add maximum bed integral term in example configurations. 2015-05-28 12:51:37 -04:00
Jonathan Bastien-Filiatrault
e86f2342c0 Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. 
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
 2015-05-28 11:48:04 -04:00
AnHardt
f0523b5816 Initialize the display earlier 
to have it ready to display errors during (temperature)-setup.
 2015-05-28 16:08:17 +02:00
Scott Lahteine
790c697c19 Fix DEGREES macro 2015-05-28 00:19:48 -07:00
Scott Lahteine
76b4678f99 Merge pull request #2171 from thinkyhead/gcode_110_is_good 
M110 is a known command
 2015-05-26 21:17:58 -07:00
Scott Lahteine
03d5709b09 M110 is a known command 
- The command parser now displays “unknown command” in more cases.
Known commands must be added to the `switch` inside `process_commands`
to suppress the error.
 2015-05-26 20:31:18 -07:00
Scott Lahteine
d76a01194d Slight size reduction by adding idle() 2015-05-26 20:08:21 -07:00
Richard Wackerbarth
2deb5a8ac5 Temporary Hack 
REVERT THIS CHANGE

In proper use, we want to force the vendor to update this file to reflect distribution parameters

However, until most users have converted to automatic versioning,
we “grant them a pass”
 2015-05-25 15:54:08 -05:00
Richard Wackerbarth
b5743d6927 Use SOURCE_CODE_URL rather than FIRMWARE_URL 2015-05-25 15:53:34 -05:00
Richard Wackerbarth
5ea139fd79 Revised Versioning mechanism 2015-05-25 15:53:14 -05:00
AnHardt
da246f5cb1 Activate BED_MINTEMP error. 
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().

Includes #2156.
 2015-05-25 13:23:19 +02:00
AnHardt
959da98d8e Call kill() only once when triggered by a temperature error 
to avoid stack overflow when called from interrupt.

Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
 2015-05-25 12:44:03 +02:00
Scott Lahteine
68f6f149d0 Reduce code size with out_of_range_error function 
- Affects code size when automatic bed leveling is enabled
 2015-05-24 20:18:02 -07:00
wurstnase
94120740d8 faster compare 
!(~(ab)&0x3) and ab == 0x3 are equal
 2015-05-23 07:55:15 +02:00
Scott Lahteine
c9141e604a Merge pull request #2145 from thinkyhead/gcode_folding 
Indentation in process_commands
 2015-05-22 18:47:37 -07:00
Scott Lahteine
b55f8718c3 Indent G90/G91, G92 2015-05-22 17:34:08 -07:00
Scott Lahteine
b0d520b109 Indent G30, G31/G32 2015-05-22 17:33:17 -07:00
Scott Lahteine
ffe27a6225 Indent G29 2015-05-22 17:32:46 -07:00
Scott Lahteine
86083badc2 Indent G4, G10/G11, G28 2015-05-22 17:32:27 -07:00
Scott Lahteine
47d7a9cb5e Indent G2/G3 2015-05-22 17:31:38 -07:00
Scott Lahteine
350f239d84 Indent G0/G1 2015-05-22 17:31:24 -07:00
Scott Lahteine
672b0c1fd3 Cleanup pins in RAMPS_13_EFB boards 2015-05-22 16:20:54 -07:00
Scott Lahteine
15a2351675 No need for +1 on initial seen_pointer 2015-05-22 15:31:30 -07:00
Scott Lahteine
550dd87b2a Set seen_pointer before calling code_value 2015-05-22 15:11:48 -07:00