584 lines
21 KiB
C
584 lines
21 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* dogm_lcd_implementation.h
|
|
*
|
|
* Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
|
|
* Demonstrator: http://www.reprap.org/wiki/STB_Electronics
|
|
* License: http://opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
* With the use of:
|
|
* u8glib by Oliver Kraus
|
|
* https://github.com/olikraus/U8glib_Arduino
|
|
* License: http://opensource.org/licenses/BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef DOGM_LCD_IMPLEMENTATION_H
|
|
#define DOGM_LCD_IMPLEMENTATION_H
|
|
|
|
/**
|
|
* Implementation of the LCD display routines for a DOGM128 graphic display.
|
|
* These are common LCD 128x64 pixel graphic displays.
|
|
*/
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
#define BLEN_A 0
|
|
#define BLEN_B 1
|
|
#define BLEN_C 2
|
|
#define EN_A (_BV(BLEN_A))
|
|
#define EN_B (_BV(BLEN_B))
|
|
#define EN_C (_BV(BLEN_C))
|
|
#define LCD_CLICKED (buttons&EN_C)
|
|
#endif
|
|
|
|
#include <U8glib.h>
|
|
#include "dogm_bitmaps.h"
|
|
|
|
#include "ultralcd.h"
|
|
#include "ultralcd_st7920_u8glib_rrd.h"
|
|
#include "Configuration.h"
|
|
|
|
#if DISABLED(MAPPER_C2C3) && DISABLED(MAPPER_NON) && ENABLED(USE_BIG_EDIT_FONT)
|
|
#undef USE_BIG_EDIT_FONT
|
|
#endif
|
|
|
|
|
|
#if ENABLED(USE_SMALL_INFOFONT)
|
|
#include "dogm_font_data_6x9_marlin.h"
|
|
#define FONT_STATUSMENU_NAME u8g_font_6x9
|
|
#else
|
|
#define FONT_STATUSMENU_NAME FONT_MENU_NAME
|
|
#endif
|
|
|
|
#include "dogm_font_data_Marlin_symbols.h" // The Marlin special symbols
|
|
#define FONT_SPECIAL_NAME Marlin_symbols
|
|
|
|
#if DISABLED(SIMULATE_ROMFONT)
|
|
#if ENABLED(DISPLAY_CHARSET_ISO10646_1)
|
|
#include "dogm_font_data_ISO10646_1.h"
|
|
#define FONT_MENU_NAME ISO10646_1_5x7
|
|
#elif ENABLED(DISPLAY_CHARSET_ISO10646_5)
|
|
#include "dogm_font_data_ISO10646_5_Cyrillic.h"
|
|
#define FONT_MENU_NAME ISO10646_5_Cyrillic_5x7
|
|
#elif ENABLED(DISPLAY_CHARSET_ISO10646_KANA)
|
|
#include "dogm_font_data_ISO10646_Kana.h"
|
|
#define FONT_MENU_NAME ISO10646_Kana_5x7
|
|
#elif ENABLED(DISPLAY_CHARSET_ISO10646_CN)
|
|
#include "dogm_font_data_ISO10646_CN.h"
|
|
#define FONT_MENU_NAME ISO10646_CN
|
|
#define TALL_FONT_CORRECTION 1
|
|
#else // fall-back
|
|
#include "dogm_font_data_ISO10646_1.h"
|
|
#define FONT_MENU_NAME ISO10646_1_5x7
|
|
#endif
|
|
#else // SIMULATE_ROMFONT
|
|
#if DISPLAY_CHARSET_HD44780 == JAPANESE
|
|
#include "dogm_font_data_HD44780_J.h"
|
|
#define FONT_MENU_NAME HD44780_J_5x7
|
|
#elif DISPLAY_CHARSET_HD44780 == WESTERN
|
|
#include "dogm_font_data_HD44780_W.h"
|
|
#define FONT_MENU_NAME HD44780_W_5x7
|
|
#elif DISPLAY_CHARSET_HD44780 == CYRILLIC
|
|
#include "dogm_font_data_HD44780_C.h"
|
|
#define FONT_MENU_NAME HD44780_C_5x7
|
|
#else // fall-back
|
|
#include "dogm_font_data_ISO10646_1.h"
|
|
#define FONT_MENU_NAME ISO10646_1_5x7
|
|
#endif
|
|
#endif // SIMULATE_ROMFONT
|
|
|
|
//#define FONT_STATUSMENU_NAME FONT_MENU_NAME
|
|
|
|
#define FONT_STATUSMENU 1
|
|
#define FONT_SPECIAL 2
|
|
#define FONT_MENU_EDIT 3
|
|
#define FONT_MENU 4
|
|
|
|
// DOGM parameters (size in pixels)
|
|
#define DOG_CHAR_WIDTH 6
|
|
#define DOG_CHAR_HEIGHT 12
|
|
#if ENABLED(USE_BIG_EDIT_FONT)
|
|
#define FONT_MENU_EDIT_NAME u8g_font_9x18
|
|
#define DOG_CHAR_WIDTH_EDIT 9
|
|
#define DOG_CHAR_HEIGHT_EDIT 18
|
|
#define LCD_WIDTH_EDIT 14
|
|
#else
|
|
#define FONT_MENU_EDIT_NAME FONT_MENU_NAME
|
|
#define DOG_CHAR_WIDTH_EDIT 6
|
|
#define DOG_CHAR_HEIGHT_EDIT 12
|
|
#define LCD_WIDTH_EDIT 22
|
|
#endif
|
|
|
|
#ifndef TALL_FONT_CORRECTION
|
|
#define TALL_FONT_CORRECTION 0
|
|
#endif
|
|
|
|
#define START_ROW 0
|
|
|
|
// LCD selection
|
|
#if ENABLED(U8GLIB_ST7920)
|
|
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
|
|
U8GLIB_ST7920_128X64_RRD u8g(0);
|
|
#elif ENABLED(U8GLIB_LM6059_AF)
|
|
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
|
|
U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);
|
|
#elif ENABLED(MAKRPANEL) || ENABLED(VIKI2) || ENABLED(miniVIKI)
|
|
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller as well
|
|
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
|
|
#elif ENABLED(U8GLIB_SSD1306)
|
|
// Generic support for SSD1306 OLED I2C LCDs
|
|
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);
|
|
#elif ENABLED(U8GLIB_SH1106)
|
|
// Generic support for SH1106 OLED I2C LCDs
|
|
U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);
|
|
#elif ENABLED(MINIPANEL)
|
|
// The MINIPanel display
|
|
U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
|
|
#else
|
|
// for regular DOGM128 display with HW-SPI
|
|
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
|
|
#endif
|
|
|
|
#ifndef LCD_PIXEL_WIDTH
|
|
#define LCD_PIXEL_WIDTH 128
|
|
#endif
|
|
#ifndef LCD_PIXEL_HEIGHT
|
|
#define LCD_PIXEL_HEIGHT 64
|
|
#endif
|
|
|
|
#include "utf_mapper.h"
|
|
|
|
int lcd_contrast;
|
|
static char currentfont = 0;
|
|
|
|
static void lcd_setFont(char font_nr) {
|
|
switch(font_nr) {
|
|
case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break;
|
|
case FONT_MENU : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break;
|
|
case FONT_SPECIAL : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break;
|
|
case FONT_MENU_EDIT : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break;
|
|
break;
|
|
}
|
|
}
|
|
|
|
char lcd_print(char c) {
|
|
if ((c > 0) && (c <= LCD_STR_SPECIAL_MAX)) {
|
|
u8g.setFont(FONT_SPECIAL_NAME);
|
|
u8g.print(c);
|
|
lcd_setFont(currentfont);
|
|
return 1;
|
|
} else {
|
|
return charset_mapper(c);
|
|
}
|
|
}
|
|
|
|
char lcd_print(const char* str) {
|
|
char c;
|
|
int i = 0;
|
|
char n = 0;
|
|
while ((c = str[i++])) {
|
|
n += lcd_print(c);
|
|
}
|
|
return n;
|
|
}
|
|
|
|
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
|
char lcd_printPGM(const char* str) {
|
|
char c;
|
|
char n = 0;
|
|
while ((c = pgm_read_byte(str++))) {
|
|
n += lcd_print(c);
|
|
}
|
|
return n;
|
|
}
|
|
|
|
#if ENABLED(SHOW_BOOTSCREEN)
|
|
static bool show_bootscreen = true;
|
|
#endif
|
|
|
|
/* Warning: This function is called from interrupt context */
|
|
static void lcd_implementation_init() {
|
|
|
|
#if defined(LCD_PIN_BL) && LCD_PIN_BL > -1 // Enable LCD backlight
|
|
pinMode(LCD_PIN_BL, OUTPUT);
|
|
digitalWrite(LCD_PIN_BL, HIGH);
|
|
#endif
|
|
|
|
#if defined(LCD_PIN_RESET) && LCD_PIN_RESET > -1
|
|
pinMode(LCD_PIN_RESET, OUTPUT);
|
|
digitalWrite(LCD_PIN_RESET, HIGH);
|
|
#endif
|
|
|
|
#if DISABLED(MINIPANEL) // setContrast not working for Mini Panel
|
|
u8g.setContrast(lcd_contrast);
|
|
#endif
|
|
|
|
// FIXME: remove this workaround
|
|
// Uncomment this if you have the first generation (V1.10) of STBs board
|
|
// pinMode(17, OUTPUT); // Enable LCD backlight
|
|
// digitalWrite(17, HIGH);
|
|
|
|
#if ENABLED(LCD_SCREEN_ROT_90)
|
|
u8g.setRot90(); // Rotate screen by 90°
|
|
#elif ENABLED(LCD_SCREEN_ROT_180)
|
|
u8g.setRot180(); // Rotate screen by 180°
|
|
#elif ENABLED(LCD_SCREEN_ROT_270)
|
|
u8g.setRot270(); // Rotate screen by 270°
|
|
#endif
|
|
|
|
#if ENABLED(SHOW_BOOTSCREEN)
|
|
int offx = (u8g.getWidth() - (START_BMPWIDTH)) / 2;
|
|
#if ENABLED(START_BMPHIGH)
|
|
int offy = 0;
|
|
#else
|
|
int offy = DOG_CHAR_HEIGHT;
|
|
#endif
|
|
|
|
int txt1X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH)) / 2;
|
|
|
|
u8g.firstPage();
|
|
do {
|
|
if (show_bootscreen) {
|
|
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
|
|
lcd_setFont(FONT_MENU);
|
|
#ifndef STRING_SPLASH_LINE2
|
|
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
|
|
#else
|
|
int txt2X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE2) - 1) * (DOG_CHAR_WIDTH)) / 2;
|
|
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 3 / 2, STRING_SPLASH_LINE1);
|
|
u8g.drawStr(txt2X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 1 / 2, STRING_SPLASH_LINE2);
|
|
#endif
|
|
}
|
|
} while (u8g.nextPage());
|
|
|
|
if (show_bootscreen) {
|
|
delay(1000);
|
|
show_bootscreen = false;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
|
|
|
|
FORCE_INLINE void _draw_centered_temp(int temp, int x, int y) {
|
|
int degsize = 6 * (temp >= 100 ? 3 : temp >= 10 ? 2 : 1); // number's pixel width
|
|
u8g.setPrintPos(x - (18 - degsize) / 2, y); // move left if shorter
|
|
lcd_print(itostr3(temp));
|
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
|
}
|
|
|
|
FORCE_INLINE void _draw_heater_status(int x, int heater) {
|
|
#if HAS_TEMP_BED
|
|
bool isBed = heater < 0;
|
|
#else
|
|
const bool isBed = false;
|
|
#endif
|
|
|
|
_draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7);
|
|
|
|
_draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28);
|
|
|
|
int h = isBed ? 7 : 8,
|
|
y = isBed ? 18 : 17;
|
|
if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) {
|
|
u8g.setColorIndex(0); // white on black
|
|
u8g.drawBox(x + h, y, 2, 2);
|
|
u8g.setColorIndex(1); // black on white
|
|
}
|
|
else {
|
|
u8g.drawBox(x + h, y, 2, 2);
|
|
}
|
|
}
|
|
|
|
FORCE_INLINE void _draw_axis_label(AxisEnum axis, const char *pstr, bool blink) {
|
|
if (blink)
|
|
lcd_printPGM(pstr);
|
|
else {
|
|
if (!axis_homed[axis])
|
|
lcd_printPGM(PSTR("?"));
|
|
else {
|
|
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
|
|
if (!axis_known_position[axis])
|
|
lcd_printPGM(PSTR(" "));
|
|
else
|
|
#endif
|
|
lcd_printPGM(pstr);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void lcd_implementation_status_screen() {
|
|
u8g.setColorIndex(1); // black on white
|
|
|
|
bool blink = lcd_blink();
|
|
|
|
// Symbols menu graphics, animated fan
|
|
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
|
|
#if HAS_FAN0
|
|
blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
|
|
#else
|
|
status_screen0_bmp
|
|
#endif
|
|
);
|
|
|
|
// Status Menu Font for SD info, Heater status, Fan, XYZ
|
|
lcd_setFont(FONT_STATUSMENU);
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
// SD Card Symbol
|
|
u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7);
|
|
u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5);
|
|
u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4);
|
|
u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION));
|
|
|
|
// Progress bar frame
|
|
u8g.drawFrame(54, 49, 73, 4 - (TALL_FONT_CORRECTION));
|
|
|
|
// SD Card Progress bar and clock
|
|
if (IS_SD_PRINTING) {
|
|
// Progress bar solid part
|
|
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2 - (TALL_FONT_CORRECTION));
|
|
}
|
|
|
|
u8g.setPrintPos(80,48);
|
|
uint16_t time = print_job_timer.duration() / 60;
|
|
if (time != 0) {
|
|
lcd_print(itostr2(time/60));
|
|
lcd_print(':');
|
|
lcd_print(itostr2(time%60));
|
|
}
|
|
#endif
|
|
|
|
// Extruders
|
|
for (int i = 0; i < HOTENDS; i++) _draw_heater_status(5 + i * 25, i);
|
|
|
|
// Heated bed
|
|
#if HOTENDS < 4 && HAS_TEMP_BED
|
|
_draw_heater_status(81, -1);
|
|
#endif
|
|
|
|
// Fan
|
|
u8g.setPrintPos(104, 27);
|
|
#if HAS_FAN0
|
|
int per = ((fanSpeeds[0] + 1) * 100) / 256;
|
|
if (per) {
|
|
lcd_print(itostr3(per));
|
|
lcd_print('%');
|
|
}
|
|
#endif
|
|
|
|
// X, Y, Z-Coordinates
|
|
// Before homing the axis letters are blinking 'X' <-> '?'.
|
|
// When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
|
|
// When everything is ok you see a constant 'X'.
|
|
#define XYZ_BASELINE 38
|
|
|
|
#if ENABLED(USE_SMALL_INFOFONT)
|
|
u8g.drawBox(0, 30, LCD_PIXEL_WIDTH, 10);
|
|
#else
|
|
u8g.drawBox(0, 30, LCD_PIXEL_WIDTH, 9);
|
|
#endif
|
|
u8g.setColorIndex(0); // white on black
|
|
|
|
u8g.setPrintPos(2, XYZ_BASELINE);
|
|
_draw_axis_label(X_AXIS, PSTR(MSG_X), blink);
|
|
u8g.setPrintPos(10, XYZ_BASELINE);
|
|
lcd_print(ftostr4sign(current_position[X_AXIS]));
|
|
|
|
u8g.setPrintPos(43, XYZ_BASELINE);
|
|
_draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink);
|
|
u8g.setPrintPos(51, XYZ_BASELINE);
|
|
lcd_print(ftostr4sign(current_position[Y_AXIS]));
|
|
|
|
u8g.setPrintPos(83, XYZ_BASELINE);
|
|
_draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink);
|
|
u8g.setPrintPos(91, XYZ_BASELINE);
|
|
lcd_print(ftostr52sp(current_position[Z_AXIS] + 0.00001));
|
|
|
|
u8g.setColorIndex(1); // black on white
|
|
|
|
// Feedrate
|
|
lcd_setFont(FONT_MENU);
|
|
u8g.setPrintPos(3, 49);
|
|
lcd_print(LCD_STR_FEEDRATE[0]);
|
|
|
|
lcd_setFont(FONT_STATUSMENU);
|
|
u8g.setPrintPos(12, 49);
|
|
lcd_print(itostr3(feedrate_multiplier));
|
|
lcd_print('%');
|
|
|
|
// Status line
|
|
#if ENABLED(USE_SMALL_INFOFONT)
|
|
u8g.setPrintPos(0, 62);
|
|
#else
|
|
u8g.setPrintPos(0, 63);
|
|
#endif
|
|
#if DISABLED(FILAMENT_LCD_DISPLAY)
|
|
lcd_print(lcd_status_message);
|
|
#else
|
|
if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) { //Display both Status message line and Filament display on the last line
|
|
lcd_print(lcd_status_message);
|
|
}
|
|
else {
|
|
lcd_printPGM(PSTR("dia:"));
|
|
lcd_print(ftostr12ns(filament_width_meas));
|
|
lcd_printPGM(PSTR(" factor:"));
|
|
lcd_print(itostr3(100.0 * volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]));
|
|
lcd_print('%');
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
|
|
if (isSelected) {
|
|
u8g.setColorIndex(1); // black on white
|
|
u8g.drawBox(0, row * (DOG_CHAR_HEIGHT) + 3 - (TALL_FONT_CORRECTION), LCD_PIXEL_WIDTH, DOG_CHAR_HEIGHT);
|
|
u8g.setColorIndex(0); // following text must be white on black
|
|
}
|
|
else {
|
|
u8g.setColorIndex(1); // unmarked text is black on white
|
|
}
|
|
u8g.setPrintPos((START_ROW) * (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
|
|
}
|
|
|
|
static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
|
|
char c;
|
|
uint8_t n = LCD_WIDTH - 2;
|
|
|
|
lcd_implementation_mark_as_selected(row, isSelected);
|
|
|
|
while (c = pgm_read_byte(pstr)) {
|
|
n -= lcd_print(c);
|
|
pstr++;
|
|
}
|
|
while (n--) lcd_print(' ');
|
|
u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
|
|
lcd_print(post_char);
|
|
lcd_print(' ');
|
|
}
|
|
|
|
static void _drawmenu_setting_edit_generic(bool isSelected, uint8_t row, const char* pstr, const char* data, bool pgm) {
|
|
char c;
|
|
uint8_t vallen = (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
|
|
uint8_t n = LCD_WIDTH - 2 - vallen;
|
|
|
|
lcd_implementation_mark_as_selected(row, isSelected);
|
|
|
|
while (c = pgm_read_byte(pstr)) {
|
|
n -= lcd_print(c);
|
|
pstr++;
|
|
}
|
|
lcd_print(':');
|
|
while (n--) lcd_print(' ');
|
|
u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH) * vallen, (row + 1) * (DOG_CHAR_HEIGHT));
|
|
if (pgm) lcd_printPGM(data); else lcd_print((char*)data);
|
|
}
|
|
|
|
#define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
|
|
#define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)
|
|
|
|
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
|
|
|
//Add version for callback functions
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
|
|
|
void lcd_implementation_drawedit(const char* pstr, const char* value=NULL) {
|
|
uint8_t rows = 1;
|
|
uint8_t lcd_width = LCD_WIDTH, char_width = DOG_CHAR_WIDTH;
|
|
uint8_t vallen = lcd_strlen(value);
|
|
|
|
#if ENABLED(USE_BIG_EDIT_FONT)
|
|
if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
|
|
lcd_setFont(FONT_MENU_EDIT);
|
|
lcd_width = LCD_WIDTH_EDIT + 1;
|
|
char_width = DOG_CHAR_WIDTH_EDIT;
|
|
if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - vallen) rows = 2;
|
|
}
|
|
else {
|
|
lcd_setFont(FONT_MENU);
|
|
}
|
|
#endif
|
|
|
|
if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - vallen) rows = 2;
|
|
|
|
const float kHalfChar = (DOG_CHAR_HEIGHT_EDIT) / 2;
|
|
float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
|
|
|
|
u8g.setPrintPos(0, rowHeight + kHalfChar);
|
|
lcd_printPGM(pstr);
|
|
if (value != NULL) {
|
|
lcd_print(':');
|
|
u8g.setPrintPos((lcd_width - 1 - vallen) * char_width, rows * rowHeight + kHalfChar);
|
|
lcd_print(value);
|
|
}
|
|
}
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
|
|
static void _drawmenu_sd(bool isSelected, uint8_t row, const char* pstr, const char* filename, char* const longFilename, bool isDir) {
|
|
char c;
|
|
uint8_t n = LCD_WIDTH - 1;
|
|
|
|
if (longFilename[0]) {
|
|
filename = longFilename;
|
|
longFilename[n] = '\0';
|
|
}
|
|
|
|
lcd_implementation_mark_as_selected(row, isSelected);
|
|
|
|
if (isDir) lcd_print(LCD_STR_FOLDER[0]);
|
|
while ((c = *filename)) {
|
|
n -= lcd_print(c);
|
|
filename++;
|
|
}
|
|
while (n--) lcd_print(' ');
|
|
}
|
|
|
|
#define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)
|
|
#define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true)
|
|
|
|
#endif //SDSUPPORT
|
|
|
|
#define lcd_implementation_drawmenu_back(sel, row, pstr) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
|
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
|
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
|
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
|
|
|
#endif //__DOGM_LCD_IMPLEMENTATION_H
|