94962ee678
In all these cases we want the axis to be homed. If we could have lost some steps is secondary. Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
159 lines
7.8 KiB
C
159 lines
7.8 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Dutch
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_NL_H
|
|
#define LANGUAGE_NL_H
|
|
|
|
#define MAPPER_NON
|
|
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
|
|
//#define SIMULATE_ROMFONT
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " gereed."
|
|
#define MSG_SD_INSERTED "Kaart ingestoken"
|
|
#define MSG_SD_REMOVED "Kaart verwijderd"
|
|
#define MSG_MAIN "Main"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
|
#define MSG_AUTO_HOME "Auto home"
|
|
#define MSG_LEVEL_BED_HOMING "Homing"
|
|
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
|
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
|
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
|
|
#define MSG_PREHEAT_PLA_N "PLA voorverw. "
|
|
#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
|
|
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
|
|
#define MSG_PREHEAT_ABS_N "ABS voorverw. "
|
|
#define MSG_PREHEAT_ABS_ALL "ABS voorverw. aan"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
|
|
#define MSG_COOLDOWN "Afkoelen"
|
|
#define MSG_SWITCH_PS_ON "Stroom aan"
|
|
#define MSG_SWITCH_PS_OFF "Stroom uit"
|
|
#define MSG_EXTRUDE "Extrude"
|
|
#define MSG_RETRACT "Retract"
|
|
#define MSG_MOVE_AXIS "As verplaatsen"
|
|
#define MSG_MOVE_X "Verplaats X"
|
|
#define MSG_MOVE_Y "Verplaats Y"
|
|
#define MSG_MOVE_Z "Verplaats Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_01MM "Verplaats 0.1mm"
|
|
#define MSG_MOVE_1MM "Verplaats 1mm"
|
|
#define MSG_MOVE_10MM "Verplaats 10mm"
|
|
#define MSG_SPEED "Snelheid"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_BED "Bed"
|
|
#define MSG_FAN_SPEED "Fan snelheid"
|
|
#define MSG_FLOW "Flow"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "Aan "
|
|
#define MSG_OFF "Uit"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Versn"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_TEMPERATURE "Temperatuur"
|
|
#define MSG_MOTION "Beweging"
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
|
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Geheugen opslaan"
|
|
#define MSG_LOAD_EPROM "Geheugen laden"
|
|
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
|
|
#define MSG_REFRESH "Ververs"
|
|
#define MSG_WATCH "Info scherm"
|
|
#define MSG_PREPARE "Voorbereiden"
|
|
#define MSG_TUNE "Afstellen"
|
|
#define MSG_PAUSE_PRINT "Print pauzeren"
|
|
#define MSG_RESUME_PRINT "Print hervatten"
|
|
#define MSG_STOP_PRINT "Print stoppen"
|
|
#define MSG_CARD_MENU "Print van SD"
|
|
#define MSG_NO_CARD "Geen SD kaart"
|
|
#define MSG_DWELL "Slapen..."
|
|
#define MSG_USERWAIT "Wachten..."
|
|
#define MSG_RESUMING "Print hervatten"
|
|
#define MSG_PRINT_ABORTED "Print afgebroken"
|
|
#define MSG_NO_MOVE "Geen beweging."
|
|
#define MSG_KILLED "AFGEBROKEN. "
|
|
#define MSG_STOPPED "GESTOPT. "
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract F"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Verv. Filament"
|
|
#define MSG_INIT_SDCARD "Init. SD kaart"
|
|
#define MSG_CNG_SDCARD "Verv. SD card"
|
|
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
|
#define MSG_YX_UNHOMED "Home X/Y voor Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystap X"
|
|
#define MSG_BABYSTEP_Y "Babystap Y"
|
|
#define MSG_BABYSTEP_Z "Babystap Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
|
#define MSG_END_HOUR "uur"
|
|
#define MSG_END_MINUTE "minuten"
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU)
|
|
#define MSG_DELTA_CALIBRATE "Delta Calibratie"
|
|
#define MSG_DELTA_CALIBRATE_X "Kalibreer X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Kalibreer Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
|
|
#endif // DELTA_CALIBRATION_MENU
|
|
|
|
#endif // LANGUAGE_NL_H
|