84 lines
2.1 KiB
C
84 lines
2.1 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Gen3 Monolithic Electronics pin assignments
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega644P__
|
|
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define DEBUG_PIN 0
|
|
|
|
// x axis
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 18
|
|
#define X_MIN_PIN 20
|
|
// Alex Checar #define X_STOP_PIN 20
|
|
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin
|
|
#define X_MAX_PIN -1
|
|
|
|
// y axis
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_MIN_PIN 25
|
|
// Alex Checar #define Y_STOP_PIN 25
|
|
#define Y_ENABLE_PIN 24 // shared with X_enable_pin
|
|
#define Y_MAX_PIN -1
|
|
|
|
// z axis
|
|
#define Z_STEP_PIN 27
|
|
#define Z_DIR_PIN 28
|
|
#define Z_MIN_PIN 30
|
|
// Alex Checar #define Z_STOP_PIN 30
|
|
#define Z_ENABLE_PIN 29
|
|
#define Z_MAX_PIN -1
|
|
|
|
// extruder pins
|
|
#define E0_STEP_PIN 12
|
|
#define E0_DIR_PIN 17
|
|
#define E0_ENABLE_PIN 3
|
|
|
|
#define HEATER_0_PIN 16
|
|
#define TEMP_0_PIN 0
|
|
|
|
#define FAN_PIN -1
|
|
|
|
// bed pins
|
|
#define HEATER_BED_PIN -1
|
|
#define TEMP_BED_PIN -1
|
|
|
|
|
|
#define SDSS -1
|
|
#define SDPOWER -1
|
|
#define LED_PIN -1
|
|
|
|
// pin for controlling the PSU.
|
|
#define PS_ON_PIN 14 // Alex, Do this work on the card?
|
|
|
|
// Alex extras from Gen3+
|
|
#define KILL_PIN -1
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define HEATER_2_PIN -1
|