165 lines
4.2 KiB
C
165 lines
4.2 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* DUE3DOM pin assignments
|
|
*/
|
|
|
|
#ifndef __SAM3X8E__
|
|
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define BOARD_NAME "DUE3DOM"
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 5
|
|
#define SERVO1_PIN 6
|
|
#define SERVO2_PIN 13
|
|
#define SERVO3_PIN -1
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 38
|
|
#define X_MAX_PIN 36
|
|
#define Y_MIN_PIN 34
|
|
#define Y_MAX_PIN 32
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN 28
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 2
|
|
#define X_DIR_PIN 3
|
|
#define X_ENABLE_PIN 22
|
|
|
|
#define Y_STEP_PIN 17
|
|
#define Y_DIR_PIN 16
|
|
#define Y_ENABLE_PIN 26
|
|
|
|
#define Z_STEP_PIN 61 // Z1 STP
|
|
#define Z_DIR_PIN 60 // Z1 DIR
|
|
#define Z_ENABLE_PIN 15 // Z1 ENA
|
|
|
|
#define E0_STEP_PIN 64 // Z2 STP
|
|
#define E0_DIR_PIN 63 // Z2 DIR
|
|
#define E0_ENABLE_PIN 62 // Z2 ENA
|
|
|
|
#define E1_STEP_PIN 51 // E1 STP
|
|
#define E1_DIR_PIN 53 // E1 DIR
|
|
#define E1_ENABLE_PIN 65 // E1 ENA
|
|
|
|
#define E2_STEP_PIN 24 // E2 STP
|
|
#define E2_DIR_PIN 23 // E2 DIR
|
|
#define E2_ENABLE_PIN 49 // E2 ENA
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor)
|
|
#define TEMP_1_PIN 2 // Analog Input (HOTEND1 thermistor)
|
|
#define TEMP_2_PIN 5 // Analog Input (unused)
|
|
#define TEMP_BED_PIN 1 // Analog Input (BED thermistor)
|
|
|
|
// SPI for Max6675 or Max31855 Thermocouple
|
|
#if DISABLED(SDSUPPORT)
|
|
#define MAX6675_SS -1
|
|
#else
|
|
#define MAX6675_SS -1
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 7 // HOTEND0 MOSFET
|
|
#define HEATER_1_PIN 8 // HOTEND1 MOSFET
|
|
#define HEATER_BED_PIN 39 // BED MOSFET
|
|
|
|
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
|
|
#define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN
|
|
#define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define SDSS 4
|
|
#define PS_ON_PIN 40
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#if ENABLED(ULTRA_LCD)
|
|
#define LCD_PINS_RS 42
|
|
#define LCD_PINS_ENABLE 43
|
|
#define LCD_PINS_D4 44
|
|
#define LCD_PINS_D5 45
|
|
#define LCD_PINS_D6 46
|
|
#define LCD_PINS_D7 47
|
|
|
|
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
|
#define BEEPER_PIN 41
|
|
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
|
|
#define SDSS 4
|
|
#define SD_DETECT_PIN 14
|
|
|
|
// RADDS LCD panel
|
|
#elif ENABLED(RADDS_DISPLAY)
|
|
#define BEEPER_PIN 41
|
|
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
|
|
#define BTN_BACK 71
|
|
|
|
#undef SDSS
|
|
#define SDSS 4
|
|
#define SD_DETECT_PIN 14
|
|
|
|
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
#define BEEPER_PIN 41
|
|
#define LCD_SDSS 4
|
|
#define SD_DETECT_PIN 14
|
|
|
|
#elif ENABLED(SPARK_FULL_GRAPHICS)
|
|
#define LCD_PINS_D4 29
|
|
#define LCD_PINS_ENABLE 27
|
|
#define LCD_PINS_RS 25
|
|
|
|
#define BTN_EN1 35
|
|
#define BTN_EN2 33
|
|
#define BTN_ENC 37
|
|
|
|
#define BEEPER_PIN -1
|
|
#endif // SPARK_FULL_GRAPHICS
|
|
#endif // ULTRA_LCD
|