Marlin/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h
2020-08-02 20:13:57 -05:00

240 lines
6.7 KiB
C

/*
*******************************************************************************
* Copyright (c) 2017, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/
#define PA1 0
#define PA2 1
#define PA3 2
#define PA4 3
#define PA5 4
#define PA6 5
#define PA7 6
#define PA8 7
#define PA9 8
#define PA10 9
#define PA11 10
#define PA12 11
#define PA13 12
#define PA14 13
#define PA15 14
#define PB0 15
#define PB1 16
#define PB2 17
#define PB3 18
#define PB4 19
#define PB5 20
#define PB6 21
#define PB7 22
#define PB8 23
#define PB9 24
#define PB10 25
#define PB11 26
#define PB12 27
#define PB13 28
#define PB14 29
#define PB15 30
#define PC2 31
#define PC3 32
#define PC4 33
#define PC5 34
#define PC6 35
#define PC7 36
#define PC8 37
#define PC9 38
#define PC10 39
#define PC11 40
#define PC12 41
#define PC13 42
#define PC14 43
#define PC15 44
#define PD0 45
#define PD1 46
#define PD2 47
#define PD3 48
#define PD4 49
#define PD5 50
#define PD6 51
#define PD7 52
#define PD8 53
#define PD9 54
#define PD10 55
#define PD11 56
#define PD12 57
#define PD13 58
#define PD14 59
#define PD15 60
#define PE0 61
#define PE1 62
#define PE11 63
#define PE3 64
#define PE4 65
#define PE5 66
#define PE6 67
#define PE7 68
#define PE8 69
#define PE9 70
#define PE10 71
#define PE2 72
#define PE12 73
#define PE13 74
#define PE14 75
#define PE15 76
#define PF0 77
#define PF1 78
#define PF2 79
#define PF6 80
#define PF7 81
#define PF8 82
#define PF9 83
#define PF11 84
#define PF12 85
#define PF13 86
#define PF14 87
#define PF15 88
#define PG0 89
#define PG1 90
#define PG2 91
#define PG3 92
#define PG4 93
#define PG5 94
#define PG6 95
#define PG7 96
#define PG8 97
#define PG9 98
#define PG10 99
#define PG11 100
#define PG12 101
#define PG13 102
#define PG14 103
#define PG15 104
#define PH0 105
#define PH1 106
#define PA0 107
#define PC1 108
#define PC0 109
#define PF10 110
#define PF5 111
#define PF4 112
#define PF3 113
// This must be a literal
#define NUM_DIGITAL_PINS 114
// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
#define NUM_ANALOG_INPUTS 7
#define NUM_ANALOG_FIRST 107
// Below SPI and I2C definitions already done in the core
// Could be redefined here if differs from the default one
// SPI Definitions
#define PIN_SPI_SS PF11
#define PIN_SPI_MOSI PB15
#define PIN_SPI_MISO PB14
#define PIN_SPI_SCK PB13
//max6675
//#define PIN_SPI_SS PA4
//#define PIN_SPI_SCK PA5
//#define PIN_SPI_MISO PA6
//#define PIN_SPI_MOSI PA7
// I2C Definitions
#define PIN_WIRE_SDA PB7
#define PIN_WIRE_SCL PB6
// Timer Definitions
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
#define TIMER_TONE TIM6
// Do not use basic timer: OC is required
#define TIMER_SERVO TIM1 //TODO: advanced-control timers don't work
// UART Definitions
// Define here Serial instance number to map on Serial generic name
#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2)
// DEBUG_UART could be redefined to print on another instance than 'Serial'
//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3
// DEBUG_UART baudrate, default: 9600 if not defined
//#define DEBUG_UART_BAUDRATE x
// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
//#define DEBUG_PINNAME_TX PX_n // PinName used for TX
// Default pin used for 'Serial' instance (ex: ST-Link)
// Mandatory for Firmata
#define PIN_SERIAL_RX PA10
#define PIN_SERIAL_TX PA9
/* Extra HAL modules */
//#define HAL_DAC_MODULE_ENABLED
#define HAL_SD_MODULE_ENABLED
#ifdef __cplusplus
} // extern "C"
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_HARDWARE Serial1
#endif