Swap partitioning over to BIOS scheme

ComputerList.csv

@@ -0,0 +1,2 @@
+MAC,CN
+78:45:c4:04:37:ab,TSMS-NINE-DTPC

README.md

@@ -1,90 +0,0 @@
-# Claremont MakerSpace Windows 10 Deployment
-
-A mess of various stuff to install Windows 10 via the network, with automatic hostname assignment from [Snipe-IT](https://snipeitapp.com/) and installation of [Salt](saltproject.io) minion.
-Domain join and rest of setup (installing applications, applying configuration, etc.) is done afterwords by Salt and group policy.
-
-## Usage
-
-In theory, just enable UEFI PXE Booting, plug into the `CMS Classroom` network, and select `PXE Boot (IPV4)` (or similar) as a boot option.
-
-- For computers with UEFI, but without UEFI PXE (for some reason...), you can make a USB drive to jumpstart the process by with `ipxe.usb` ([see below](#build-ipxe))
-- For computers without Ethernet, a USB Ethernet adapter can be used (I'm not sure which adapters work, but USB 3 seems to have added a more standardized interface, so is more likely to work)
-  - In theory, some WiFi adapters support PXE booting (and are supported by iPXE), but not the ones in the latops CMS has
-- Currently also still requires some manual fiddling to get windows to activate using digital licenses; you can force it to try by "troubleshooting" the activation. There is presumably a better way to handle this.
-
-## Setup
-
-Somewhat based on [this helpful guide][pxe_win].
-Written for Debian 11.
-Various hostnames and exact paths may need to be adjusted in provided files.
-Also assumes UEFI booting, because Legacy booting is pretty deprecated at this point.
-
-### Enable PXE booting in DHCP server
-
-Depends pretty heavily on DHCP server, but in UniFi it's in `Settings -> Networks -> <specific network> -> Advanced`.
-See [previously mentioned guide][pxe_win] or [iPXE docs](https://ipxe.org/howto/dhcpd) for more details (but ignore the bit about chainloading, as we instead are using an embedded script).
-
-### <a id="build-ipxe"></a>Build custom [iPXE](https://ipxe.org/)
-
-1. Clone `git://git.ipxe.org/ipxe.git`
-2. Copy [`embed.ipxe`](./embed.ipxe) to `src/`
-   - This allows for chainloading, without needing support from the DHCP server
-3. Build PXE executable or usb image
-
-```sh
-make bin-x86_64-efi/ipxe.usb EMBED=embed.ipxe SHELL="sh" # For USB drive
-make bin-x86_64-efi/ipxe.efi EMBED=embed.ipxe SHELL="sh" # For PXE TFTP boot
-```
-
-4. `dd` `ipxe.usb` to a USB drive, if needed (for computers with UEFI, but not UEFI PXE)
-
-### TFTP (via `tftpd-hpa`)
-
-1. Install `tftpd-hpa` package
-2. Copy [`tftp/main.ipxe`](./tftp/main.ipxe) (and `ipxe.efi`, if PXE booting) to `/srv/tftp`
-   - This doesn't actually need to be a menu; it could basically just be `chain http://<hostname here>:8081/poll/1/${mac} ||`
-3. Copy [`tftp/tftpd.map`](./tftp/tftpd.map) to `/etc/`, and add `--map-file /etc/tftpd.map` to `TFTP_OPTIONS` in `/etc/default/tftpd-hpa`
-   - This is to work around some older UEFI PXE implementations, which add a 0xFF character (which they render as ÿ) after the file name for unclear reasons
-
-### Hostname script
-
-1. Install `python3` and `python3-requests`
-2. Copy [`ipxe-set-hostname-from-serial.py`](./ipxe-set-hostname-from-serial.py) to `/usr/lib/cgi-bin`
-3. [Generate a token from Snipe-IT](https://snipe-it.readme.io/reference/generating-api-tokens) and edit it into the script
-
-### [Shoelaces](https://github.com/thousandeyes/shoelaces)
-
-1. Set base URL, bind address, and data dir in `/etc/default/shoelaces`
-2. Copy [`shoelaces`](./shoelaces) folder to `/srv/shoelaces`
-3. Download [wimboot](https://ipxe.org/wimboot) and put it in `/srv/shoelaces/static/windows`
-4. Adjust [`mappings.yaml`](./shoelaces/mappings.yaml) for the targeted subnet
-
-### Windows Installer
-
-1. [Download The latest Windows 10 ISO](https://www.microsoft.com/en-us/software-download/windows10ISO)
-2. Extract the ISO to `software` SMB share, at `pxe/Windows10`
-3. Retrieve the following files for pxe booting, and place them in `/srv/shoelaces/static/windows/windows10/` (keeping the folder structure):
-
-```
-boot/bcd
-boot/boot.sdi
-sources/boot.wim
-```
-
-### [Salt](https://saltproject.io/) minion
-
-1. [Download latest salt windows minion installer](https://docs.saltproject.io/salt/install-guide/en/latest/topics/install-by-operating-system/windows.html)
-2. Place in `<software share>/pxe/Windows10/sources/$OEM$/$$/setup/scripts/` as `Salt-Minion-Setup.exe`
-   - This slightly magic path will place the files at `C:\Windows\Setup\Scripts` in the installed OS
-3. Copy [`SetupComplete.cmd`](./SetupComplete.cmd) to same directory
-   - This will be run after setup is complete as `SYSTEM`, and installs salt with the configured hostname as the minion name
-
-## Sources/References
-
-- [iPXE boot Windows and Linux, using uefi.][pxe_win]
-- [iPXE - open source boot firmware [docs]][ipxe_docs]
-- [Snipe-IT API Reference][snipeit_api]
-
-[pxe_win]: https://rpi4cluster.com/pxe/win/ "iPXE boot Windows and Linux, using uefi."
-[ipxe_docs]: https://ipxe.org/docs "iPXE - open source boot firmware [docs]"
-[snipeit_api]: https://snipe-it.readme.io/reference/ "Snipe-IT API Reference"

Set-ComputerName.ps1

@@ -0,0 +1,58 @@
+# Look up computer name from mac address in a file
+# Based on Set-ComputerName from:
+# https://kristopherjturner.com/2017/02/01/automating-computer-naming-after-deploying-windows-10-images/
+
+$FileName = "ComputerList.csv"
+
+$scriptPath = Split-Path $script:MyInvocation.MyCommand.Path
+
+$thisComputerMAC = Get-WmiObject win32_networkadapterconfiguration -Filter 'ipenabled = "true"' | Select-Object MACAddress
+$ComputerList = Import-Csv -Path "$scriptPath\$FileName"
+
+# look up computer name by MAC address
+ForEach ($Computer in $ComputerList) {
+    Write-Host "$($Computer.CN) $($Computer.MAC) $thisComputerMac"
+    If ($thisComputerMAC -match $Computer.MAC) {
+        Write-Host "$($Computer.CN) matches the localhost MAC Address: $thisComputerMAC"
+        $NewComputerName = $Computer.CN
+    }
+}
+
+# if computer isn’t on list, ask for a name
+If ($Null -eq $NewComputerName) {
+    Write-Host "Computer is not found in computer list." -ForegroundColor Red
+    $NewComputerName = Read-Host -Prompt "Please enter desired computer name then hit enter"
+}
+
+$cred = New-Object System.Management.Automation.PsCredential("SAWTOOTH\DomainJoin", (ConvertTo-SecureString "REPLACE_WITH_PASSWORD" -AsPlainText -Force))
+
+Write-Host "Waiting for RPC Service"
+(Get-Service RpcSs).WaitForStatus("Running")
+
+# rename computer and join to domain
+Write-Host "Computer will be renamed to $NewComputerName."
+Rename-Computer -NewName $NewComputerName -Force -Verbose
+
+Write-Host "Waiting for RPC Service"
+(Get-Service RpcSs).WaitForStatus("Running")
+
+While($True){
+    try{
+        Write-Host "Trying to Domain Join"
+        Add-Computer -ErrorAction Stop -Force -DomainName sawtooth.claremontmakerspace.org -Options JoinWithNewName,InstallInvoke -Credential $cred
+        break
+    }
+    catch{
+        Write-Host $_
+        Start-Sleep -Seconds 1 # wait for a seconds before next attempt.
+    }
+}
+
+# Install Salt
+Write-Host "Installing Salt with minion name: $NewComputerName."
+\\ucs.sawtooth.claremontmakerspace.org\Software\Salt-Minion-3004.2-Py3-AMD64-Setup.exe /S /minion-name="$NewComputerName"
+
+
+#Read-Host -Prompt "Press Enter to reboot"
+#Start-Sleep -Seconds 30
+#Restart-Computer

SetupComplete.cmd

@@ -1,3 +0,0 @@
-FOR /F %%H IN ('hostname') DO C:\Windows\Setup\Scripts\Salt-Minion-Setup.exe /S /minion-name=%%H /master=salt.sawtooth.claremontmakerspace.org
-
-RMDIR /S /Q C:\Windows\Setup\Scripts\

autounattend.xml

@@ -1,4 +1,3 @@
-{{define "windows10/unattend.xml" -}}
 <?xml version="1.0" encoding="utf-8"?>
 <unattend xmlns="urn:schemas-microsoft-com:unattend">
     <settings pass="windowsPE">
@@ -18,57 +17,37 @@
                     <DiskID>0</DiskID>
                     <WillWipeDisk>true</WillWipeDisk>
                     <CreatePartitions>
-                        <!-- Windows RE Tools partition -->
+                      <!-- System partition -->
                       <CreatePartition wcm:action="add">
                         <Order>1</Order>
                         <Type>Primary</Type>
                         <Size>300</Size>
                       </CreatePartition>
-                        <!-- System partition (ESP) -->
+
-                        <CreatePartition wcm:action="add">
-                            <Order>2</Order>
-                            <Type>EFI</Type>
-                            <Size>100</Size>
-                        </CreatePartition>
-                        <!-- Microsoft reserved partition (MSR) -->
-                        <CreatePartition wcm:action="add">
-                            <Order>3</Order>
-                            <Type>MSR</Type>
-                            <Size>128</Size>
-                        </CreatePartition>
                       <!-- Windows partition -->
                       <CreatePartition wcm:action="add">
-                            <Order>4</Order>
+                        <Order>2</Order>
                         <Type>Primary</Type>
                         <Extend>true</Extend>
                       </CreatePartition>
+
                     </CreatePartitions>
                     <ModifyPartitions>
-                        <!-- Windows RE Tools partition -->
+
+                      <!-- System partition -->
                       <ModifyPartition wcm:action="add">
                         <Order>1</Order>
                         <PartitionID>1</PartitionID>
-                            <Label>WINRE</Label>
+                        <Label>System</Label>
                         <Format>NTFS</Format>
-                            <TypeID>DE94BBA4-06D1-4D40-A16A-BFD50179D6AC</TypeID>
+                        <Active>true</Active>
                       </ModifyPartition>
-                        <!-- System partition (ESP) -->
+
+                      <!-- Windows partition -->
                       <ModifyPartition wcm:action="add">
                         <Order>2</Order>
                         <PartitionID>2</PartitionID>
-                            <Label>System</Label>
+                        <Label>Windows</Label>
-                            <Format>FAT32</Format>
-                        </ModifyPartition>
-                        <!-- MSR partition does not need to be modified -->
-                        <ModifyPartition wcm:action="add">
-                            <Order>3</Order>
-                            <PartitionID>3</PartitionID>
-                        </ModifyPartition>
-                        <!-- Windows partition -->
-                        <ModifyPartition wcm:action="add">
-                            <Order>4</Order>
-                            <PartitionID>4</PartitionID>
-                            <Label>OS</Label>
                         <Letter>C</Letter>
                         <Format>NTFS</Format>
                       </ModifyPartition>
@@ -79,7 +58,7 @@
                 <OSImage>
                     <InstallTo>
                         <DiskID>0</DiskID>
-                        <PartitionID>4</PartitionID>
+                        <PartitionID>2</PartitionID>
                     </InstallTo>
                     <InstallToAvailablePartition>false</InstallToAvailablePartition>
                 </OSImage>
@@ -117,7 +96,7 @@
             <CEIPEnabled>0</CEIPEnabled>
         </component>
         <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-            <ComputerName>{{.hostname}}</ComputerName>
+            <ComputerName>*</ComputerName>
             <ProductKey>W269N-WFGWX-YVC9B-4J6C9-T83GX</ProductKey>
         </component>
     </settings>
@@ -132,12 +111,46 @@
                 <SkipMachineOOBE>true</SkipMachineOOBE>
                 <ProtectYourPC>1</ProtectYourPC>
             </OOBE>
-            <RegisteredOrganization>Claremont MakerSpace</RegisteredOrganization>
+            <UserAccounts>
-            <RegisteredOwner>Claremont MakerSpace</RegisteredOwner>
+                <LocalAccounts>
+                  <LocalAccount wcm:action="add">
+                    <Password>
+                      <Value>REPLACE_WITH_LOCAL_ADMIN_PASSWORD</Value>
+                      <PlainText>true</PlainText>
+                    </Password>
+                    <Description>Local Administrator</Description>
+                    <DisplayName>Local Administrator</DisplayName>
+                    <Group>Administrators;Power Users</Group>
+                    <Name>LocalAdmin</Name>
+                  </LocalAccount>
+                </LocalAccounts>
+            </UserAccounts>
+            <RegisteredOrganization></RegisteredOrganization>
+            <RegisteredOwner></RegisteredOwner>
             <DisableAutoDaylightTimeSet>false</DisableAutoDaylightTimeSet>
             <TimeZone>Eastern Standard Time</TimeZone>
+            <AutoLogon>
+              <Enabled>true</Enabled>
+              <LogonCount>2</LogonCount>
+              <Username>LocalAdmin</Username>
+              <Password>
+                <Value>REPLACE_WITH_LOCAL_ADMIN_PASSWORD</Value>
+              </Password>
+            </AutoLogon>
+            <FirstLogonCommands>
+              <SynchronousCommand wcm:action="add">
+                <CommandLine>net use \\ucs\software /user:DomainJoin REPLACE_WITH_PASSWORD</CommandLine>
+                <Description>Set Up UCS Share</Description>
+                <Order>1</Order>
+              </SynchronousCommand>
+              <SynchronousCommand wcm:action="add">
+                <CommandLine>powershell -NoExit -executionPolicy Bypass -File \\ucs.sawtooth.claremontmakerspace.org\Software\unattend\Set-ComputerName.ps1</CommandLine>
+                <Description>Set Computer Name</Description>
+                <Order>2</Order>
+                <RequiresUserInput>true</RequiresUserInput>
+              </SynchronousCommand>
+            </FirstLogonCommands>
         </component>
     </settings>
     <cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 10 Pro" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
 </unattend>
-{{end}}

embed.ipxe

@@ -1,10 +0,0 @@
-#!ipxe
-dhcp && goto netboot || goto dhcperror
-
-:dhcperror
-prompt --key s --timeout 10000 DHCP failed, hit 's' for the iPXE shell; reboot in 10 seconds && shell || reboot
-
-:netboot
-#chain tftp://${next-server}/main.ipxe ||
-chain tftp://172.18.142.6/main.ipxe ||
-prompt --key s --timeout 10000 Chainloading failed, hit 's' for the iPXE shell; reboot in 10 seconds && shell || reboot

ipxe-set-hostname-from-serial.py

@@ -1,39 +0,0 @@
-#!/usr/bin/env python3
-
-import os
-
-import requests
-
-SNIPEIT_TOKEN = "SET_ME"
-
-
-def get_hostname_from_snipeit(serial: str):
-    r = requests.get(
-        "https://inventory.claremontmakerspace.org/api/v1/hardware/byserial/" + serial,
-        headers = {"Authorization": "Bearer " + SNIPEIT_TOKEN}
-    )
-    data = r.json()
-    if len(data["rows"]) == 1:
-        name = data["rows"][0]["name"]
-        if name:
-            return name
-        else:
-            asset_tag = data["rows"][0]["asset_tag"]
-            id = data["rows"][0]["id"]
-            raise Exception(f"No name set for asset {id}, tag {asset_tag}")
-    elif len(data["rows"]) < 1:
-        raise Exception("No asset found")
-    else:
-        raise Exception("Multiple assets with this serial number found")
-
-
-print("Content-type: text/plain\n")
-print("#!ipxe")
-try:
-    hostname = get_hostname_from_snipeit(os.environ["QUERY_STRING"])
-    if hostname:
-        print("set hostname " + hostname)
-        print("echo Set hostname=${hostname}")
-except Exception as e:
-    print("echo Failed to set hostname from serial ${serial}, exiting in 5 seconds...")
-    print(f"echo Error: {e}")

shoelaces/ipxe/windows10.ipxe.slc

@@ -1,15 +0,0 @@
-{{define "windows10.ipxe" -}}
-#!ipxe
-
-chain http://cms-net-svcs.claremontmakerspace.org/cgi-bin/ipxe-set-hostname-from-serial.py?${serial}
-
-kernel http://{{.baseURL}}/configs/static/windows/wimboot
-initrd http://{{.baseURL}}/configs/static/windows/windows10/boot/bcd           BCD
-initrd http://{{.baseURL}}/configs/static/windows/windows10/boot/boot.sdi      boot.sdi
-initrd http://{{.baseURL}}/configs/static/windows/windows10/winpeshl.ini       winpeshl.ini
-initrd http://{{.baseURL}}/configs/windows10/unattend.xml?hostname=${hostname} unattend.xml
-initrd http://{{.baseURL}}/configs/static/windows/windows10/install.bat        install.bat
-initrd http://{{.baseURL}}/configs/static/windows/windows10/sources/boot.wim   boot.wim
-
-boot
-{{end}}

shoelaces/mappings.yaml

@@ -1,4 +0,0 @@
-networkMaps:
-  - network: 172.18.57.0/24
-    script:
-      name: windows10.ipxe

shoelaces/static/windows/windows10/install.bat

@@ -1,9 +0,0 @@
-wpeinit
-ipconfig
-echo "Sleeping for 10 seconds for network..."
-echo wsh.sleep 10000 > sleep.vbs
-cscript /nologo sleep.vbs
-ipconfig
-net use \\ucs\software
-\\ucs\software\pxe\Windows10\setup.exe /unattend:unattend.xml
-pause

shoelaces/static/windows/windows10/winpeshl.ini

@@ -1,2 +0,0 @@
-[LaunchApps]
-"install.bat"

tftp/main.ipxe

@@ -1,17 +0,0 @@
-#!ipxe
-:MENU
-menu
-item --gap -- ---------------- iPXE boot menu ----------------
-item shoelaces      Shoelaces
-item shell          ipxe shell
-choose --default return --timeout 5000 target && goto ${target}
-
-:shoelaces
-chain http://cms-net-svcs.claremontmakerspace.org:8081/poll/1/${mac} ||
-goto MENU
-
-:shell
-shell ||
-goto MENU
-
-autoboot

tftp/tftpd.map

@@ -1 +0,0 @@
-rg (.*)<29>$ \1