30 lines
1.8 KiB
Markdown
30 lines
1.8 KiB
Markdown
# Claremont MakerSpace 3D Printers
|
|
|
|
| Printer | [Lulzbot TAZ 6](#lulzbot-taz-6-lulzbot-taz-6) | [Lulzbot Mini](#lulzbot-mini-lulzbot-mini) | [Polar 3D](#polar-3d-polar-3d) | [Anet A8](#anet-a8-anet-a8) |
|
|
| --------------------- | --------------------------------------------- | ------------------------------------------ | ------------------------------ | --------------------------- |
|
|
| Filament Diameter(mm) | 3 (2.85) | 3 (2.85) | 1.75 | 1.75 |
|
|
| Extruder | Direct | Direct | Bowden | Direct |
|
|
| Kinematics | Cartesian | Cartesian | Polar | Cartesian |
|
|
|
|
## [Lulzbot TAZ 6](<./Lulzbot TAZ 6>)
|
|
|
|
A mostly stock [Lulzbot TAZ 6](https://www.lulzbot.com/store/taz-6).
|
|
The Y axis stepper is using the E1 stepper driver because the original Y axis stepper driver is damaged.
|
|
|
|
## [Lulzbot Mini](<./Lulzbot Mini>)
|
|
|
|
A stock [Lulzbot Mini](https://lulzbot.com/store/lulzbot-mini).
|
|
|
|
## [Polar 3D](<./Polar 3D>)
|
|
|
|
This is a somewhat odd printer with polar kinematics.
|
|
The company that made it no longer makes printers, so documentation is hard to find/non-existant.
|
|
Currently running [Klipper](https://www.klipper3d.org/), but has issues with moves near the center of the build plate.
|
|
|
|
## [Anet A8](<./Anet A8>)
|
|
|
|
This is a somewhat heavily modified [Anet A8](https://shop.anet3d.com/products/official-anet-a8-3d-printer).
|
|
Pretty standard Cartesian bowden printer.
|
|
5V regulator is not quite working, so has separate 5V supply bodged on.
|
|
Runs stock [Marlin](https://marlinfw.org/).
|